Using audio from 2 angles simultaneously in multicam

Hi,
I have recorded panel discussion on 3 cameras with 3 radio mics. The audio has been recorded to two of the cameras (One mic on one camera and 1 on each track of the other camera). I want to use the audio from both cameras throughout the entire discussion.
At the moment I can only pick audio from one of the angles. Any ideas on how to select two?
Any help would be appreciated!!
Cheers,
Adam

Hi,
Straight from Digidesign (maker of your MBox2) :
Compatibility Alerts
Mac OS X 10.5 (Leopard)
Pro Tools software and hardware are currently not compatible with the Mac OS X 10.5 (Leopard) operating system, including all versions of Pro Tools 7.4. For the latest information, check the announcement in the News section regarding upcoming support:
Information on Pro Tools Compatibility with Mac OS X Leopard
If you choose to upgrade to Mac OS X 10.5 (Leopard), you will need to install it on a separate hard drive or drive partition. To use Pro Tools 7 currently, you will need to boot from a Mac OS X 10.4 (Tiger) startup system.
From this website:
http://www.digidesign.com/index.cfm?navid=54&itemid=23954
So, the answer is, not until Digidesign have completed their update to be compatible with Leopard.
Cheers, and good luck.

Similar Messages

  • Using audio from a WebSite in a connect session.

    I am using VoIP to present Websites that have voice recordings (and other audio) embedded in them. Is there a way to enable Connect 7 to present VoIP and the audio in Web sites? In my attempts participants can hear me but not the audio in Web sites. Help would be appreciated. Thanks ...

    Adding to this: could it be that because the audio-from-a-clip comes from a different location (in fact an external disk where the movie project is) while the rest of the voice-over  music tracks come from my iTunes?

  • Use audio from clip in other parts of sequence

    I inserted some photos in my sequence but I do not have any audio playing while the pictures are rolling. I would like to use some of the audio portions of my other clips to put "below" the still pictures.
    How do I do this?
    Thank you,
    Ildiko

    There are three ways that I can think of at the moment to do this:
    1. Unpatch your video tracks so that the v1 button is not adjoined to the V1, then drag a clip from the viewer to the overwrite/insert selection on the canvas.
    2. Lock your video tracks (by hitting the lock button on the left), then drag a clip from the viewer to the canvas or timeline.
    3. Select just the audio from another clip already in the timeline by holding down Option and clicking it, then copy and paste it somewhere else.
    Sasha

  • Possible to use Audio In and Out simultaneously?

    Is there any additional adaptor/gadget that I can purchase so that both the Audio In and Out features of the audio jack can be simultaneously?
    For example, so that Audio In can be used to record an external source input while the Audio Out is piped to a headphone to monitor the recording?
    Thanks!

    Air has a headset jack.
    You can use a splitter
    Mics should be USB capable for best results, almost all headset mics are junk quality.
    then monitoring or listening thru the headphones
    consider using a PRO MIC , such as an Audio Technica AT2020 USB
    http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
    or better still use one of these with pro XLR mics:
    http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

  • Avchd using audio from other clips

    Hi
    I just reloaded a project from a client to do some adjustments. all files are AVCHD put in 3 different folders. "Media/Footage/Card1/Private (Card2/Private)... you get it.
    Suddenly my audio both in timeline and reference monitor switched source to other clips. I've tried to restart, I tried to use prelude to ingest using prores conversion. if I play it from quicktime everything works fine. this is only a problem with some clip not all. I didn't rename in the folder structure only in the project bins.
    Does anybody know if this is a general problem for CC 2014. I never had this problem with CC version.
    Let me know if anybody struggles with the same issues.
    regards
    Morten

    Hi Morten,
    When you had initially put the project together, did you Import the AVCHD clips with "File > Import" or Media Browser? The latter is preferred and alleviates a lot of discomfort later on. Can't guarantee this is the solution, but doesn't hurt.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Use audio from iMovie for menu in iDVD

    I would like to use 30 seconds of audio out of a 30 min. video for use in a menu in iDVD.
    I seem to have to detach audio, but that lets me only use it within iMovie;
    Export audio seems to export the whole movie.
    Is there an elegant way to extract these 30 seconds outside iMovie?
    Thank you very much!

    • duplicate your Project in iMovies Project Browser
    • 'trim' that Project to the wanted 30secs
    • Share/Export using Quicktime - there's a drop-down menu, allowing to choose 'aiff'
    • drag created audio file into your iDVD Project's info window of the menu

  • Using audio from the Program I am recording

    I am trying to demo a program with Captivate.
    The program has audio in it, and I need to be able to record that.
    I was trying to record it in real time, but it doesn't seem ti record the internal audio.
    How would I set it up to record that?
    Thanks!

    Hi there
    I answered an eerily similar post on this earlier today.
    See if the thread linked below helps you solve it.
    Click here to read the thread
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Audio from one event posting to another video?

    I'd like to use audio from one event and use it for the audio of another movie. I've done it before, but simply can't find the info or remember just how I did it last time. Does anyone know how to do this?

    ooooh, I figured it out! Sorry for the posting.

  • Inputting audio from Logic into iMovie video, involving syncing etc.

    Hey guys, Im looking to make some song covers on youtube. But instead of just using audio from a camera, i want to input enhanced audio from using logic etc, and then syncing it with the video footage, using iMovie. An example of what i want to do: http://www.youtube.com/watch?v=u1SN1eN1_m4
    please help me !

    Hi,
    I'm having this exact problem right now.
    Did you ever figure it out?
    Sorry I don't have a solution...
    I'd appreciate any suggestions you may have discovered.
    Leanne

  • Recorded Meeting plays audio from connect url but offline does not

    Hello,
    I recorded my meeting using audio from telephone conference (which is a nice new feature for 7.5 if not using one of the supported phone conferencing systems).  When I play the recording from the adobe connect site URL (or choose edit) the audio plays.  When I do a "make offline" it creates the presentation only with no audio.  Is this a limitation that I did not read about or am I doing something wrong?
    thank you

    use this code "Component control = player.getVisualComponent(); "
    instead of this code " Component control = player.getControlPanelComponent();"
    But if you want show both of them, modify as following
    Component control1 = player.getControlPanelComponent();
    Component control2 = player.getVisualComponent();
    then add the two control (control1 & control2 ) to your JFrame panel

  • Multicam Edit with Audio from 2 Cam

    I'm editing a multicam project with 5 cameras.  I want to use the audio from 2 cameras.  What is the best way to do this?
    Right now I have the main audio all the way down and I dragged just the audio from the 2 cams I needed onto the timeline.  They aren't part of the angle viewer.  Is there another way.?  I had to manually sync it.  Hope that makes sense.

    In a multicam you can choose to switch audio and video, only audio or only video, so you can just use the 5 angles corresponding to the 5 cameras, and work with that.
    It is perfectly easy to do in Angle Viewer. Just click the appropriate button at the top of the Angle Viewer.
    In the picture above the "video only" button (blue) is selected; in this situation, if you click to cut to a different angle you'll cut and switch only the video, and keep the same angle for audio. You can click the audio/video or the audio only whenever you need, and it will act accordingly. Very easy, very effective.

  • No audio from ipad2 to TV when using HDMI

    No audio from ipad2 to TV when using HDMI

    Hi
    I'm having exactly the same problem.
    I have 2009 macpro
    I worked out I can get visual from HDMI 3 and no picture.
    Sound comes though PC1
    Did you fix the problems?

  • How do I use just the audio from a clip without the video?

    Can't remember how to use just the audio from a clip, without the video.  FCP X can't select like FCP&

    Edit just the audio into the timline.
    The disclosure triangle next to the edit buttons.

  • How can you use one NetStream to publish video and audio from another NetStream in AS3?

    Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen.  How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere?  I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved.  The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

    RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
    RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
    How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
    URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

  • Using an audio from one video to another

    I am trying to make a documentary type film and I want to use an audio segment from one video to overlap another video's audio while using the second video just for the video. Here is an example of it.
    http://www.youtube.com/watch?v=9u7dJXDhOjc
    Im trying to acheive what they did for the first 15 seconds of this clip. I use movie 08.

    This is easy in iMovie 09.
    Here is [how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

Maybe you are looking for

  • Issue in PO Tax coad

    Dear All,       I have an issue which is like this: I have a set of PO's for different vendors, in all PO's Tax coads are given, but when i see in Print privew there are no Tax printed, I am able to see the tax in Invoice tab when i click the invoice

  • Zero Value Invoice in SAP

    Hi, I have a scenario as I need to show days 15 cost zero, on the invoice, to show the customer we are giving service fee of charge. Is there any way in SAP where one can create a zero value invoice? The standard FoC (Free of Charge) business process

  • Keyword to multiple images not working

    I'm using AP2.1.4. I'm just now starting to see the reason for assigning keywords and am tackling this. I am finding it easy to take a keyword from the keyword HUD and apply it to a single image. My problem is trying to apply it to a larger group of

  • 1.1.2 Available Friday or before

    Hi all, Apologies if this is old news! The UK release of iPhone ships with 1.1.2...although apparently nothing much has been updated. Oh except that it will supposedly brick all hacked iPhones. I guess this will mean the update will be available befo

  • Purchase Requisition Realease Strategy without classification

    Hi, Request for detail process and configurations for Purchase Requisition Release Strategy without classification. We have 5 authorities like A1 (Lowest) and A5 (Highest authority) in the organisation to release the PR. The PR should be released acc