Using audio hijack pro,.... scripting the "hijack" button,...

computer is set to startup at 9am,...
login items launch,.... one being audio hijack pro,....
how do i sript or automate the "command g" command,....?
it is the equivalent to the onscreen "hijack" button,...
i've tried doing it as a record from within "script editor"
i know very little about applescripting or automator,..
and they don't seem to be low curve learning,...
any help would be appreciated,....
M

i do appreciate these suggestions,...
the schedule function in audio hijack does indeed provide the ability to automatically hijack at startup,.. thank you,....
i guess i'd like to do this without timers,...
but hey,... gift horses and mouths, right,....?
perhaps before i let this go, i'd like to garner a little info on scripting that button command,...
so that i might do this without a timer,...
thans much all,....
cheers,..
M

Similar Messages

How can I automatically close a dialog box using Javascript after I click the OK button to submit it?

How can I automatically close a dialog box using Javascript after I click the OK button to submit it? I don't want to have to X out of the dialog box after I am done.
Thanks
Linda

JS can not interact with open dialogs in any way, unless it's a dialog
created in JS using the Dialog object.
On Thu, Jul 24, 2014 at 11:13 PM, lindaeliseruble <[email protected]>

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

When I try to play some of the songs in my itunes library, I get a prompt saying the file could not be used. When I hit the "locate" button, it still won't locate the file. I didn't delete any of these tracks and there is no common link between them.

When I try to play some of the songs in my itunes library, I get a prompt saying the file cannot be used. When I hit the locate button, the file cannot be found. I didn't delete any songs/files and there is no common link between the missing songs.

Hello there, Paso Kid.
The following Knowledge Base articles provide some assistance with locating content in your iTunes Library:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
and
Where are my iTunes files located?
http://support.apple.com/kb/HT1391
If you have already reviewed those steps and still cannot find the songs you purchased from iTunes, delete the songs and download them again using the information in this article:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Using my MacBook Pro as the host for projection to my TV via AppleTV?

Can I subscribe to HBOGO thru Apple TV and avoid cable service using my MacBook Pro as the host for projecting to my TV via AppleTV?S

Possibly.
Some sites such as TMN GO which is similar will not allow mirroring to take place.
It works for about a minute then shuts down... Security settings from the site.

How to Use an Image to Customize the Static Button Widget

Can I just get someone to help me figure out how to use an image to customize the static button widget, please?
I have tried using several different types of images, but none of them seem to actually change the appearance of the button.
Thanks!
Laura
Captivate 5.5

I tried to use the tools within the widget itself - it offers you the opportunity to use an image (see screenshot below).
I also opened it in Flash and tried to replace the images for one of the button styles there w/ my own, but in re-publishing the SWF from there I broke the widget. When I attempted to use the edited widget, there were no customization controls available after I inserted it (see screenshot two below).

I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Why

I am trying to delete a page from a pdf using Acrobat X Pro but the delete option is greyed out. Does anyone know why?

Post your question in the forum for Adobe Acrobat.

Ways to record radio broadcasts using Audio Hijack Pro

If I download Audio Hijack Pro what is the simplest and most efficient way to download radio broadcasts ?
I have experimented using Garageband and my radio tuner with an audio cable connected to the 'audio-in' port without success.

I'm late to this discussion because I've had no problems recording my weekly 2-hour jazz show by inputting my Onkyo tune to my 2013 iMac vs. USB (Apple removed the audio-in jack--darn it). I recorded them in Sound Studio (which unlike Toast has easily editable audio waves--and for digitizing LPs, I found I could be more accurate and achieve faster results that with Spin Doctor, which is bundled with Toast). I had no trouble. That is, until now. My recordings are suddenly all static. I can hear my voice in the background but the recording is unusable for all practical purposes.
I can only infer that the problem may stem from my Onkyo receiver transmitting a regular FM signal (it's not an HD receiver). The station that I broadcast from is HD (like many other public radio stations), so the main channel (#1) along with #2 and #3 are transmitting a high def signal, which will not have static (it's all or nothing, the signal is clear or it's non-existent).
Therefore, it appears I need a program like AHP to record the program direct from our station's internet site. (I'm not clear if internet radio and HD radio are the same thing. HD radio, of course, proved a bust, but internet audio seems no longer to provoke the little bit of complaint. (10 years ago it was like 2 dixiecups communicating with a string. A joke when compared to the best vinyl. But now the AIFF and Apple Lossless files appear to meet the approval of audiophiles.)
I'm wondering if AHP is still the program of choice for recording sounds from my internet radio station (My Roxio Toast claims to have the capability, but it's proven highly buggy and undependable.) Or would I be better advised to look for an external HD radio/tuner with audio out to go to my computer. (Possibly a tall order these days with no one making HD radios.)

Can you use a MacBook Pro without the keyboard attached?

Hi,
I plan to upgrade the hard drive in my MacBook Pro (MBP) to a solid state drive (SSD). I also plan to remove the SuperDrive in the optical bay.
I have to install a new firmware on the SSD. Installing the firmware requires the SuperDrive.
I intend to remove the SuperDrive after installing the firmware. I'm using a Early 2008 MBP (Pre-Unibody). This MBP is a difficult to dismantle and assemble.
Can I run the MBP (to install the firmware in FreeDOS) without reattaching the top panel (which houses the keyboard). Or can I just lay the top panel on the MBP without screwing it down. Will either of these actions damage my MBP? Once I've installed the firmware on the MBP, I'll reattach the keyboard.
I don't want to dismantle the MBP (to insert the SSD), assemble the MBP (to install the firmware with the CD in the SuperDrive) then disassemble the MBP again (to remove the SuperDrive).
I'd rather dismantle and assemble the MBP once.
Lifting the top panel (which houses the keyboard)
[IMG]http://s1.guide-images.ifixit.com/igi/AWVpQDJmt36GHxMS.large[/IMG]
[IMG]http://s1.guide-images.ifixit.com/igi/CRBYPZtYRqpWYY4O.large[/IMG]
Please let me know.
Thanks!

Sorry, Just noticed you were not using the Unibody models.
I am unaware if the power button is dedicated. Seems like you're on the right track with iFixIt. I figure as long as USB is available, it should be okay.

I have developed a fillable form using Adobe Acrobat Pro. The form has several fields and some of the information is captured in a bar code. What programs must be used to open the form to properly fill the form out? Adobe Reader, Adobe Xi, Ibook, etc.. I

I have created a fillable form using Adobe Acrobat Pro that contains several data fields with some feeding data to a barcode in the document. I have a "button" set up to save and send the completed form one it is completed. Some of the user are having troubles filling out the form as they are using various programs to do such as iBook, Adobe Reader, etc.... Sometimes the information is not transferred to the barcode and sometimes the "submittal button" doesn't function properly.
Please provide a solution or give me a list of the programs that must be used to properly open and fill out the form.
Greatly appreciated.

Best option is to use Adobe Reader (or Acrobat, of course) on a desktop computer (ie, not on a mobile device). Any other configuration is likely to be problematic.

I lose internet on my iMac when my mate uses his macbook pro in the same room.

My wireless internet works absolutley fine with no problems at all, no glitches until my mate turns on his macbook pro. Every couple of minutes I have to turn my wireless connection off and back on again. Sometimes this fixes the problem for another couple of minutes, sometimes I have to turn off and on the connection before I can get internet. I am connected to the network and can access my friend's shared files on his macbook but no internet. I thought bandwidth may have been the issue but it even does this while his macbook is idle with no internet activity from his macbook, he simply just has to activate the macbook from standby and that's it. I lose my internet.
Please someone help me, as he stays connected with no problems at all.

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT4628 Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.

Using QuickTime 7 Pro for the first time with Windows. What can it do?

Greetings,
After spending almost two hours with Apple reps, I finally figured out where the controls are for QuickTime Pro. I have started to use Miraizon's Cinematize Pro 2 to extract clips as mpeg-4 files (a lot smaller than a QT movie, though maybe it can be made smaller if I compressed it, though I don't know how). Now I wish I knew exactly what I am able to do with my mpeg-4 clip once I've extracted it.
So the question is, having a PC, Windows XP and QT 7 Pro, exactly what features does it have for editing? I opened a mpeg-4 with QT Player and of course have the following to choose from under the "edit" function: cut, copy, delete, select all,select none, trim to selection, add to movie, add to selection and scale, find and preferences. So please tell me at least what I can do with this program and at least how to begin.
By the way, I have a website and use Microsoft FrontPage 2003. I have a combination of video types previously made and sent to me by others; some are .wmv, some are .mov. Now as I use Cinematize 2 Pro, I am creating mpeg-4s. This choice is made because I'd like to keep the file as small as possible without losing quality per se and also I want to reduce to a minimum the problems anyone visiting my site who wants to see the clip might have. Also you should know I insert the movie files onto my websie as plug-ins/MIME files.
I'm new to the list and would greatly appreciate your help.
Thanks!

QuickTime Pro is a rather simple editing application and once you learn how to make a "selection" (letter i and o keys) and then fine tune it (Shift and right left arrow keys) you're on your way.
You can also "scrub" through large files by using the J, K and L keys or copy/paste selections into new Player windows.
Dozens of image, video and audio formats can be opened by QuickTime Pro and then "Exported" (converted) to other file formats. It can even open plain text files to use as "titles", narration text for the hearing impaired.
The Windows version can also make "One Click" audio recordings (Mac version can make video and audio files). A simple way to add a narration track to your video. Since QuickTime .mov files can have up to 99 tracks and support about 27 languages you can make one file for many nations.
QuickTime Pro is also a very powerful authoring tool.
QuickTime Pro can even create files that view without a "box":
http://homepage.mac.com/kkirkster/D/index.html
Some of my QuickTime files and Web pages as examples:
http://homepage.mac.com/kkirkster/03war/
http://homepage.mac.com/kkirkster/RedneckTexasXmas/index.html
It can also be used to make "presentation" files:
http://homepage.mac.com/kkirkster/.Public/TouchofGrey.qtl
What can it do? It's all up to your imagination.

Scripting the STOP button

I swear I've searched for this topic and found nothing.
It's pretty basic-- when I author a disc and test it, I press the Stop button on the Remote.
It sits there with a black screen.
I have gone through the excellent DVD Studio Pro 4 Peachpit Apple Pro Training book and the closest example I could find dealt with scripting for two menus.
For this project I have only one menu. I have tried to generalize the example to set a GPRM for 1 value (1, in fact) and a second pre-script to Compare if menuID=1. I've attached this to Disc end jump. That doesn;t feel right but there's no place to attach it to, oh, something logical like THE STOP BUTTON.
It ain't working! Stop leaves me with black screen.
Pretty basic. Is scripting overkill for a simple escape command while in Play?
Help appreciated.

[Your a little confused on the purpose of scripts. You can't attach a script to the Stop button.]
I'm not confused, my POST is confused!
I'm aware remote control buttons can't be scripted, but actions and events can. Somewhere.
Clueless users often expect something helpful when the stop button is pressed, rather than being taken to their player system screen and completely out of the disc. I was certain there was a way to head off this action. Okay, I may be wrong and I'm taking on far too much work looking for a solution. Stop does mean stop, after all. But some folks don't realize there are one or more menu buttons to keep them in the disc. They press stop and then they have to press Play, and navigate to their favorite submenu, etc.
Russ (hi!) --
Yeah, I always plug in Return. Those Playback Controls in Advanced however look like they disable controls. I've stayed away from them.
Thanks, guys.

How to use Java Robot to click the same button multiple times

Hi All,
I am trying to use Java Robot to turn a Windows utility located on the Desktop by clicking the same button on and then off with the following code:
1. Robot robot1 = new Robot();
2. robot1.mouseMove(400,180);
    // Turn on the utility
3. robot1.delay(100);
4. robot1.mousePress(InputEvent.BUTTON1_MASK);
5. robot1.delay(100);
6. robot1.mouseRelease(InputEvent.BUTTON1_MASK);
    //Wait for 2 minutes
7. robot1.delay(200);
    // Move the mouse to disconnect button
8. robot1.mouseMove(400,180);
    // Turn off the utility
9. robot1.mousePress(InputEvent.BUTTON1_MASK);
10. robot.delay(100);
11. robot.mouseRelease(InputEvent.BUTTON1_MASK);However, only the first click (line 1 - 7) worked. Everything from step 8 onwards doesn't appear to be doing anything. Even instantiating another robot2 to carry out step 8 - 11 did not work either. Also have tried running steps 9 - 11 only. ie skip 8.
My aim is to turn this tool on and off at regular interval.
Any assistance would be greatly appreciated.
Thanks in advance,
Jack

Hi darth_code_r and Vincent,
Both you and Vincent are right about insufficient time between the release ( 6 ) of mouse button and step ( 9 ) press the same button again to turn it off. You are also correct in saying that it was not necessary to move the mouse again ( 8 ) since it was sitting on the right button already.
Below is the code I have ended up with which worked for me:
1. Robot robot1 = new Robot();
2. robot1.mouseMove(390,150);
4. robot1.mousePress(InputEvent.BUTTON1_MASK);
6. robot1.mouseRelease(InputEvent.BUTTON1_MASK);
     //Wait for 3 minutes
7. robot1.delay(30000);
9. robot1.mousePress(InputEvent.BUTTON1_MASK);
11. robot1.mouseRelease(InputEvent.BUTTON1_MASK);This utility also takes a few seconds to turn itself on and vice versa. As a result, it is necessary to give it sufficient time to turn on prior to turning it off again with the second mouse press.
Thanks to both of you very much,
Jack

TS1702 I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the documents using Adobe? I tried the open button, but I still can not get more than the first page. Thanks

I installed Adobe Reader so I can read PDFs a teacher has posted online. How do I open the PDFs? I tried using the open button at the top, but I'm only able to see the first page. Thanks

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

Using audio hijack pro,.... scripting the "hijack" button,...

Similar Messages

Maybe you are looking for