Using Auto-Install with Cisco 2504 WLC

I have a config file that would like to deploy to multiple 2504 controllers.
I am trying to get Auto-Install to upload my config file but I keep getting the 'no interfaces registered' message.
I have my config file on the root of the tftpd32 folder and have TFTP and DHCP servers enabled.
Any ideas what could be causing this?
Thanks

Did you configure DHCP option 150, so that the WLC knows where to find the TFTP server? This should be possible in tftp32.
See for more info this document, it is kinda aged but still accurate.

Similar Messages

Power adapter for cisco 2504 WLC

Hi all ,
Is there any other part numbers for cisco 2504 WLC power adpater other than
PWR-2504-AC= ?
Thanks,
Regards,
Vijay.

No "PWR-2504-AC=" is the only power adapter option for 2504.
Please check the datasheet:-
http://www.cisco.com/en/US/prod/collateral/wireless/ps6302/ps8322/ps11630/data_sheet_c78-645111.html

Help required to implement Cisco 2504 WLC and 1042 Access Points

Hi,
My name is Vidya Sagar. I am new to Wireless technology. We are planning to implement Wireless in our office. I have given the requirements below. Kindly go through the details and let me know how to start.
We have purchased Cisco 2504 Wireless Controller (One) and Ciscon 1042 Access Points (Five). At present I am going to use 3 access points only.
I have attached a simple diagram of our office network. We have more than 30 VLANs configured in Core Switch, we are planning to give wifi access to only 3 VLANs.
1. VLAN 121 ( IP Segment - 10.52.121.0 /24)
2. VLAN 116 ( IP Segment - 10.52.116.0 /24)
3. VLAN 100 ( IP Segment - 192.168.100.0 /24) (Guest)
Please give me a implementation plan to do this. I would like to use LDAP or ACS for authentication purpose.
Regards,
Vidya Sagar

Lets just do this simple first before you start using ACS as that will require a certificate installed on the ACS for using PEAP.
So first off, the WLC we will say is in vlan 10. When you are going through the startup wizard, make sure you define the vlan tag to 10 on the management interface. Make sure your virtual interface is an IP address that is not routed in your network, like an out of band IP.
Make sure the WLC time is correct or use NTP!!!!
Now you should be able to http or https to the WLC. I would upgrade the code to v7.4 and install the FUS image. Please reference this link for the upgrade procedure. You don't have to upgrade now... I would wait till you get everything working first.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html
Now I would connect the APs on the same vlan as the WLC for now. Make sure there is dhcp on that subnet. Once the APs have joined, then you can move them to any subnet you want. Since you don't have many APs it would be okay to leave them in the same vlan as the WLC management or out them on any other vlan you choose. The APs will be connected to an access port NOT a trunk port!!!!
The WLC will need to be connected on a dot1q trunk port only allowing vlans 10,100,116,121. The 2504 running v7.4 will support LAG (etherchannel). Any ways, your switch port should look like this for example only
Interface gigabit1/0/1
description WLC2504
switch port trunk encapsulation dot1q
switchoort mode trunk
switch trunk allowed vlans 10,100,116,121
spanning-tree portfast trunk
channel-mode group 10 mode on << only for v7.4 if you use lag
Don't connect all four ports right now, just port one!!!!
Your Guest vlan, you will need to create an ACL to block traffic from accessing the internal network. You might want to allow dhcp and DNS bit I would leave it open first until you can verify everything is working.
Now on the WLC you need to create a dynamic interface for vlan 100, 116, and 121. If you click on the Controller tab in the GUI and click on interfaces on the left hand side, that will take you to where you can add/delete/modify your interfaces. When creating these interfaces, make sure you add the dhcp server IP address for the primary and or backup.
Now that you have your dynamic interfaces created, its time I create your SSID. Now click on the WLAN tab on the GUI and click on WLAN and then on the too right select Create New and then click go. Select WLAN on the drop down menu and then for the profile name I would use the SSID name also for simplicity.lean e the WLAN id to 1 for this and 2 for the next and so on. After defining these and clicking Apply you can now define your SSID. On the General tab, enable the status and leave the radio policy to all for now, you can decide later what you want to use. Choose your interface you wan to place this SSID on and enable Broadcast SSID for now and leave everything else alone. Now click on the Security tab and on the layer 2 Security, leave it at WPA + WPA2, only check WPA2 Policy and for WPA2 encryption choose AES only. Now go to the bottom of that screen and choose PSk. We will do pre shared key for now so you get to understand the setup and make sure everything is working first. Now on the PSK format, choose ASCII and put your pre shared key in the input box. Make this simple to for testing. You don't want to put in symbols or anything like that. When you are don with that, check apply on the top right and test.
Now you can repeat this with your other SSIDs just to test. Your guest network you can leave open for now to test open authentication.
Here are some links for the WebAuth feature:
https://supportforums.cisco.com/docs/DOC-13954
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080b1a506.shtml
Now if you want to use ACS with PEAP, here is some links for that:
https://supportforums.cisco.com/videos/2499
http://www.cisco.com/en/US/products/ps10315/products_configuration_example09186a0080bd1100.shtml
https://www.google.com/url?sa=t&source=web&cd=8&ved=0CFQQtwIwBw&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DWk_bRdmsQlA&ei=_BEyUeCYM8TdqAHHsICAAw&usg=AFQjCNF8PiVBQK1Kipb4j8AzD153bKtmgA&sig2=smHhNVmCr2of2NzbnDhGmw
Well that is it, hopefully you can get the wireless up for testing and verifying everything works!
Sent from Cisco Technical Support iPhone App

Prevent Agents from disabling Headset Button hen using Auto Answer With Headset

Help!!!
When you enable "Auto Answer with Headset" an agent can still press the Headset button and break that function. Is there a way to keep the agent from being able to disable the Headset button on the phone (Cisco IP Phone 7962g) while maintaining the ability to force Auto Answer with Headset??
Thanks for any ideas!

Hi,
It sounds more like training or organizational issue. If agents do it accidentally, usually this behavior disappeas in a couple of days (if agents were using other phones). And if they do it on-purpose, then supervisors should take care for this issue.
Technically this issue may be resolved by placing some kind of plastic cap over the headset button, but then you should have a mechanism to activate a headset button, if it was deactivated (for excample, afther the phone reboots).
Alternatively you may use longer cord and place the phone out of reach (not exactly "far-far away", but at least out of the hand reach. Plus, depending on the CallCenter software you use, agent may never need touch a phone, in most cases all interaction happens on the PC.
Good luck,
Mike / CCNP, CCVP, CCSP, CCDP, MCSE, CCIE Voice (written), etc.
Headset Adapters for Cisco IP Phones

PoE auto switchover with Cisco 1252 Access Point.

Dear All
I have a network for Managed Wireless using Cisco. This is a new network for me.
I am in problem with Cisco Access Point 1252. My AP's are connected to a PoE Switch. And Cisco AP's are also connected Powered with also Power Adapter with UPS backup.
But problem is if I disconnect power source of AP Power Adapter , AP is not getting up with PoE. PoE is up only when POWER PLUG of AP ADAPTER is physically pulled out from Socket.
Question is if it is possible to make automatic Failover by PoE when Power source of AP ADAPTER is down ?? I mean no need to PULL OUT POWER PLUG of AP ADAPTER.
Waiting for your rely.
It is very urgent .
Thanking You
Subrun.

Hi Suburn,
1- yes it is possible to do failover without unlupping the cable of AC adapter. When power on ACS adapter is off, then the faiolver happens.
2- with regards to POE, if your switch supporting enhanced POE?
Powering the Aironet 1250 Series Access Point with Cisco Enhanced PoE
Cisco Enhanced PoE was designed for customers who want to install new PoE-enabled technologies that require greater than 15.4W per port to function at full capability, such as wireless technology based on the IEEE 802.11n standard. Cisco Enhanced PoE provides the full power requirements for dual-radio modules and eliminates the need to run an additional cabling drop or insert a separate power injector. Support for Enhanced PoE is currently available on a variety of Cisco Catalyst® switching platforms. For more information on Enhanced PoE, visit http://www.cisco.com/en/US/prod/switches/epoe.html.
Serge

Using Linksys PAP2T with CISCO UC500

Dear Sirs,
i am currently in the middle of an installation for one of my customers, and facing some problems...
the customer has 2 branches connected through a Microwave Link.
on his old site he has a Panasonic Analog PBX with 5 PSTN Lines and 10 Users + 1 Operator
in his new Branch we have Installed a CISCO UC500 With 4 FXO and 4 FXS Ports, he has 4 PSTN Lines + 10 Users + 1 Operator.
what he wants is that if someone dials in to the first branch, that the operator to be able to transfer him tp the second branch and vice-versa.
i was told that if i install a Linksys PAP2T Adapter in the first branch where the Panasonic PBX is present and take a line from the Panasonic to the PAP2T and then go out from the PAP2T using LAN to the Switch then the Microwave Connection,i would be able to link the Two Branches as in Phone Lines.
is That true and if so? how to do it?
cant seem to find anything in the PAP2T that shows that.
thank you for your support and have a nice day.
Regards,
Christian Abi Khalil

I think it is not possible with the PAP2T device. As this device dosent have that facility which are planning to use it. I think you need to look for some other device which support that kind of funcitions.

How to use auto numbering with ENG_ECO_PUB.PROCESS_ECO (EBS version 12.1.1)

Hi All,
I'm trying to create a new ECO using the PL/SQL API "ENG_ECO_PUB.PROCESS_ECO". I want the ECO name to be automatically assigned by the system but when leaving the ECO_NAME empty (in paramter P_ECO_REC) I get the error message:
"You must enter an ECO name and organization because they are the primary identifiers of a business object. Please ensure that these values exist in all your records and re-run the import process."
I have set the profile option "ENG: Change Order Autonumbering - System Administrator access" to yes.
I have set following fields in P_ECO_REC:
p_eco_rec.organization_code := 'V1';
p_eco_rec.change_type_code := 'ECO';
p_eco_rec.description := 'Test';
p_eco_rec.transaction_type := 'CREATE';
p_eco_rec.plm_or_erp_change := 'ERP'; -- also tried with 'PLM'
p_eco_rec.approval_status_name := 'Approved';
Do I need to set anything else?
Thanks,
Carolin

Hi Helios,
thanks for reply.
I checked note 1242524.1, but there's no advice what to configure for using auto numbering.
I tried it again with adapted sample code and leaving the ECO_NAME empty:
DECLARE
-- API Input variables
l_eco_name VARCHAR2(9) := '';
l_org_code VARCHAR2(3) := 'V1';
l_rev_item_number VARCHAR2(20):= 'CS_Test_Assem_10';
l_eff_date DATE := '8-SEP-2011';
l_new_revised_item_revision VARCHAR2(2) := 'A';
l_eco_rec Eng_Eco_Pub.Eco_Rec_Type := Eng_Eco_Pub.g_miss_eco_rec;
l_eco_revision_tbl Eng_Eco_Pub.Eco_Revision_Tbl_Type := Eng_Eco_Pub.g_miss_eco_revision_tbl;
l_revised_item_tbl Eng_Eco_Pub.Revised_Item_Tbl_Type := Eng_Eco_Pub.g_miss_revised_item_tbl;
l_rev_component_tbl Bom_Bo_Pub.Rev_Component_Tbl_Type := Eng_Eco_Pub.g_miss_rev_component_tbl;
l_sub_component_tbl Bom_Bo_Pub.Sub_Component_Tbl_Type := Eng_Eco_Pub.g_miss_sub_component_tbl;
l_ref_designator_tbl Bom_Bo_Pub.Ref_Designator_Tbl_Type := Eng_Eco_Pub.g_miss_ref_designator_tbl;
l_rev_operation_tbl Bom_Rtg_Pub.Rev_Operation_Tbl_Type := Eng_Eco_Pub.g_miss_rev_operation_tbl;
l_rev_op_resource_tbl Bom_Rtg_Pub.Rev_Op_Resource_Tbl_Type := Eng_Eco_Pub.g_miss_rev_op_resource_tbl;
l_rev_sub_resource_tbl Bom_Rtg_Pub.Rev_Sub_Resource_Tbl_Type := Eng_Eco_Pub.g_miss_rev_sub_resource_tbl;
-- API output variables
x_eco_rec Eng_Eco_Pub.Eco_Rec_Type := Eng_Eco_Pub.g_miss_eco_rec;
x_eco_revision_tbl Eng_Eco_Pub.Eco_Revision_Tbl_Type := Eng_Eco_Pub.g_miss_eco_revision_tbl;
x_revised_item_tbl Eng_Eco_Pub.Revised_Item_Tbl_Type := Eng_Eco_Pub.g_miss_revised_item_tbl;
x_rev_component_tbl Bom_Bo_Pub.Rev_Component_Tbl_Type := Eng_Eco_Pub.g_miss_rev_component_tbl;
x_sub_component_tbl Bom_Bo_Pub.Sub_Component_Tbl_Type := Eng_Eco_Pub.g_miss_sub_component_tbl;
x_ref_designator_tbl Bom_Bo_Pub.Ref_Designator_Tbl_Type := Eng_Eco_Pub.g_miss_ref_designator_tbl;
x_rev_operation_tbl Bom_Rtg_Pub.Rev_Operation_Tbl_Type := Eng_Eco_Pub.g_miss_rev_operation_tbl;
x_rev_op_resource_tbl Bom_Rtg_Pub.Rev_Op_Resource_Tbl_Type := Eng_Eco_Pub.g_miss_rev_op_resource_tbl;
x_rev_sub_resource_tbl Bom_Rtg_Pub.Rev_Sub_Resource_Tbl_Type := Eng_Eco_Pub.g_miss_rev_sub_resource_tbl;
-- Other API variables for return status / error handling / debugging
l_error_table Error_Handler.Error_Tbl_Type;
l_return_status VARCHAR2(1) := NULL;
l_msg_count NUMBER := 0;
l_output_dir VARCHAR2(500) := 'C:\temp';
l_debug_filename VARCHAR2(60) := 'su_debug_10_15.dbg';
-- WHO columns
l_user_id          NUMBER := -1;
l_resp_id          NUMBER := -1;
l_application_id     NUMBER := -1;
l_row_cnt          NUMBER := 1;
l_user_name          VARCHAR2(30) := 'MFG';
l_resp_name          VARCHAR2(30) := 'MFG_AND_DIST_SUPER_USER_APS';
BEGIN
-- Get the user_id
SELECT user_id
INTO l_user_id
FROM fnd_user
WHERE user_name = l_user_name;
-- Get the application_id and responsibility_id
SELECT application_id, responsibility_id
INTO l_application_id, l_resp_id
FROM fnd_responsibility
WHERE responsibility_key = l_resp_name;
FND_GLOBAL.APPS_INITIALIZE(l_user_id, l_resp_id, l_application_id); -- Mfg / Mfg & Dist Mgr / INV
dbms_output.put_line('Initialized applications context: '|| l_user_id || ' '|| l_resp_id ||' '|| l_application_id );
Error_Handler.Initialize;
l_return_status := NULL;
l_eco_rec.eco_name := l_eco_name;
l_eco_rec.organization_code := l_org_code;
l_eco_rec.change_type_code := 'ECO';
l_eco_rec.eco_department_name := NULL;
l_eco_rec.priority_code := NULL; --'Medium';
l_eco_rec.approval_list_name := NULL; --'SU_ONLY';
l_eco_rec.reason_code := NULL;
l_eco_rec.Approval_Status_Name:= 'Approved'; -- will default to Not submitted for Approval
l_eco_rec.Status_Name := 'Open';
l_eco_rec.description := 'ECO - '||l_eco_rec.eco_name||' API Test';
l_eco_rec.transaction_type := 'CREATE';
l_eco_rec.plm_or_erp_change := 'ERP'; -- or 'PLM'
l_eco_rec.return_status := NULL;
dbms_output.put_line('Initialized ECO Header');
l_revised_item_tbl(l_row_cnt).eco_name := l_eco_name;
l_revised_item_tbl(l_row_cnt).organization_code := l_org_code;
l_revised_item_tbl(l_row_cnt).revised_item_name := l_rev_item_number;
l_revised_item_tbl(l_row_cnt).new_revised_item_revision := l_new_revised_item_revision;
l_revised_item_tbl(l_row_cnt).start_effective_date := l_eff_date;
l_revised_item_tbl(l_row_cnt).alternate_bom_code := NULL;
l_revised_item_tbl(l_row_cnt).status_type := 1; -- 'Open'
l_revised_item_tbl(l_row_cnt).change_description := 'Test';
l_revised_item_tbl(l_row_cnt).transaction_type := 'CREATE'; -- transaction type : CREATE / UPDATE
dbms_output.put_line('Initialized ECO revised items');
-- Add RS_BOM_C3, acd_type = 1
l_rev_component_tbl(l_row_cnt).eco_name := l_eco_name;
l_rev_component_tbl(l_row_cnt).organization_code:= l_org_code;
l_rev_component_tbl(l_row_cnt).revised_item_name := l_rev_item_number;
l_rev_component_tbl(l_row_cnt).new_revised_item_revision := l_new_revised_item_revision;
l_rev_component_tbl(l_row_cnt).start_effective_date := l_eff_date;
l_rev_component_tbl(l_row_cnt).operation_sequence_number := 1;
l_rev_component_tbl(l_row_cnt).component_item_name := 'CS_Sub_Item_10_D'; -- Add RS_BOM_C3
l_rev_component_tbl(l_row_cnt).alternate_bom_code := NULL;
l_rev_component_tbl(l_row_cnt).acd_type := 1;
l_rev_component_tbl(l_row_cnt).item_sequence_number := 40; -- new item sequence number
l_rev_component_tbl(l_row_cnt).quantity_per_assembly := 5;
l_rev_component_tbl(l_row_cnt).transaction_type := 'CREATE'; -- transaction type : CREATE / UPDATE
-- Change RS_BOM_C1, acd_type = 2
l_row_cnt := l_row_cnt + 1;
l_rev_component_tbl(l_row_cnt).eco_name := l_eco_name;
l_rev_component_tbl(l_row_cnt).organization_code:= l_org_code;
l_rev_component_tbl(l_row_cnt).revised_item_name := l_rev_item_number;
l_rev_component_tbl(l_row_cnt).new_revised_item_revision := l_new_revised_item_revision;
l_rev_component_tbl(l_row_cnt).start_effective_date := l_eff_date; -- effective date
l_rev_component_tbl(l_row_cnt).operation_sequence_number := 1;
l_rev_component_tbl(l_row_cnt).component_item_name := 'CS_Sub_Item_10_B'; -- Change qty for RS_BOM_C1
l_rev_component_tbl(l_row_cnt).alternate_bom_code := NULL;
l_rev_component_tbl(l_row_cnt).acd_type := 2;
l_rev_component_tbl(l_row_cnt).old_effectivity_date := to_date('29-APR-2011 10:09:38', 'dd-MON-yyyy hh24:mi:ss'); -- old effectivity date from bill
l_rev_component_tbl(l_row_cnt).old_operation_sequence_number := 1; -- old operation sequence number from bill
l_rev_component_tbl(l_row_cnt).item_sequence_number := 20;
l_rev_component_tbl(l_row_cnt).quantity_per_assembly := 5; -- existing comp qty on Bill = 2
l_rev_component_tbl(l_row_cnt).transaction_type := 'CREATE'; -- transaction type : CREATE / UPDATE
-- Disable RS_BOM_C2, acd_type = 3
l_row_cnt := l_row_cnt + 1;
l_rev_component_tbl(l_row_cnt).eco_name := l_eco_name;
l_rev_component_tbl(l_row_cnt).organization_code:= l_org_code;
l_rev_component_tbl(l_row_cnt).revised_item_name := l_rev_item_number;
l_rev_component_tbl(l_row_cnt).new_revised_item_revision := l_new_revised_item_revision;
l_rev_component_tbl(l_row_cnt).start_effective_date := l_eff_date;
l_rev_component_tbl(l_row_cnt).disable_date := l_eff_date + 2; -- disable date is 2 day from effective_date
l_rev_component_tbl(l_row_cnt).operation_sequence_number := 1;
l_rev_component_tbl(l_row_cnt).component_item_name := 'CS_Sub_Item_10_C'; -- disable RS_BOM_C2
l_rev_component_tbl(l_row_cnt).alternate_bom_code := NULL;
l_rev_component_tbl(l_row_cnt).acd_type := 3;
l_rev_component_tbl(l_row_cnt).old_effectivity_date := to_date('29-APR-2011 10:09:38', 'dd-MON-yyyy hh24:mi:ss'); -- old effectivity date from bill
l_rev_component_tbl(l_row_cnt).old_operation_sequence_number := 1; -- old operation sequence number from bill
l_rev_component_tbl(l_row_cnt).transaction_type := 'CREATE'; -- transaction type : CREATE / UPDATE
dbms_output.put_line('Initialized ECO revised components');
-- call API to create eco
DBMS_OUTPUT.PUT_LINE('=======================================================');
DBMS_OUTPUT.PUT_LINE('Calling Eng_Eco_PUB.Process_Eco API');
Eng_Eco_PUB.Process_Eco( p_api_version_number => 1.0
, p_init_msg_list => TRUE
, x_return_status => l_return_status
, x_msg_count => l_msg_count
, p_bo_identifier => 'ECO'
, p_eco_rec => l_eco_rec
, p_eco_revision_tbl => l_eco_revision_tbl
, p_revised_item_tbl => l_revised_item_tbl
, p_rev_component_tbl => l_rev_component_tbl
, p_ref_designator_tbl => l_ref_designator_tbl
, p_sub_component_tbl => l_sub_component_tbl
, p_rev_operation_tbl => l_rev_operation_tbl
, p_rev_op_resource_tbl => l_rev_op_resource_tbl
, p_rev_sub_resource_tbl => l_rev_sub_resource_tbl
, x_eco_rec => x_eco_rec
, x_eco_revision_tbl => x_eco_revision_tbl
, x_revised_item_tbl => x_revised_item_tbl
, x_rev_component_tbl => x_rev_component_tbl
, x_ref_designator_tbl => x_ref_designator_tbl
, x_sub_component_tbl => x_sub_component_tbl
, x_rev_operation_tbl => x_rev_operation_tbl
, x_rev_op_resource_tbl => x_rev_op_resource_tbl
, x_rev_sub_resource_tbl => x_rev_sub_resource_tbl
, p_debug => 'Y'
, p_output_dir => l_output_dir
, p_debug_filename => l_debug_filename
dbms_output.put_line('x_eco_rec.eco_name:'|| x_eco_rec.eco_name );
dbms_output.put_line('x_eco_rec.org_code:'|| x_eco_rec.organization_code);
DBMS_OUTPUT.PUT_LINE('=======================================================');
DBMS_OUTPUT.PUT_LINE('Return Status: '||l_return_status);
IF (l_return_status <> FND_API.G_RET_STS_SUCCESS) THEN
dbms_output.put_line('x_msg_count:' || l_msg_count);
Error_Handler.GET_MESSAGE_LIST(x_message_list => l_error_table);
DBMS_OUTPUT.PUT_LINE('Error Message Count :'||l_error_table.COUNT);
FOR i IN 1..l_error_table.COUNT LOOP
DBMS_OUTPUT.PUT_LINE(to_char(i)||':'||l_error_table(i).entity_index||':'||l_error_table(i).table_name);
DBMS_OUTPUT.PUT_LINE(to_char(i)||':'||l_error_table(i).message_text);
END LOOP;
END IF;
DBMS_OUTPUT.PUT_LINE('=======================================================');
EXCEPTION
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('Exception Occured :');
DBMS_OUTPUT.PUT_LINE(SQLCODE ||':'||SQLERRM);
DBMS_OUTPUT.PUT_LINE('=======================================================');
RAISE;
END;
But with this example I again get same error message...
Any idea?
Thanks,
Carolin

Cisco 2504 WLC - Facebook WI-FI service

Hi All,
Any one know if a standard Cisco WLC 2500 + a few 1242's Cisco install can support Facebook WI-FI service without the need for an MSE, bit like what Cisco Meraki offer for free?
https://meraki.cisco.com/blog/2013/05/youll-like-this-cisco-meraki-wifi-with-facebook-login/
Thanks for any replies.
Jay

Thanks Saurav,
Question - Could I not introduce a compliant router (Facebook WI-FI service) then associate a WLAN and port to that service?
E.G. Introduce new router/ISP- Cisco ISR G2 and ASR 1000 Series routers (enable Facebook WI-FI service), uplink to WLC port via layer 2 VLAN (E.G. port 4) associate new WLAN with port 4, DHCP, DNS services etc delivered from the new router/ISP.
Cheers,

Using Auto Mask with brush

I have watched tutorials on this and consider myself an advanced PC user but I am stuck here. When I read how other people use this tool, it shows them starting at a point on their photo then using the brush and the mask doesnt allow the brush to cover over different color areas than the one first selected. But..when I attempt this, all the photo sections are covered in the mask not just my starting point color...what am i doing wrong..how you can follow this.
thanks

From Lightroom news........
The auto-mask controls
The Auto Mask option cleverly masks the image as you paint with the Adjustment brush. It works by analyzing the color and tone of the area where you click with the Adjustment brush and only applies the effect to those areas that match the same tone and color.
In response to the middle point comment, that would kind of defeat the purpose of the tool. The tool is only suppose to mask the starting color not surrounding areas. Thats why its suppose to be so great.
check this out. http://lightroom-news.com/2008/07/31/auto-masking-in-lightroom-2/
unless im reading this wrong, its suppose to work like i said above.

Cisco 2504 WLC client VPN Access

Hi,
I was reading couple of posts related to Cisco WLC + Client VPN passthrough .. and got a query.
https://supportforums.cisco.com/thread/2183687
https://supportforums.cisco.com/thread/2219356
The second link says that "Remote Acces VPN connections through the WLC work out of the box". Is this True? No need to configure Layer 3 VPN-Pass though for the SSID?
They are using WPA2+PSK as Layer 2 Security. Here WPA2-PSK + VPN Passthrough is the right combination for WLAN Layer2 + Layer 3 Security?
Thanks,
Jagan

It works out of the box... you don't need to configure any passthrough.. just connect to the ssid and VPN away.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Using Auto Fill with web sites often used

How do I turn on the "Auto Fill" Name and Pass Word, For a site I previously stated " Never for this site?
So that I can quickly access the site without filling in all the details when ever I wanty to use the site.

Try the Tiny Menu extension. I am using an older version of Tiny Menu on Lucid with Firefox 3.6.x and it works fine.

Access Connections Auto Install With Default Profile?

Is there a way that when access connection installs using thin installer to auto import the default profile I have created?
Solved!
Go to Solution.

Hi jcav404,
Chapter 4 and Appendix A might ablr to help.
ThinkVantage Access Connections Profile Deployment guide - Notebooks
http://support.lenovo.com/en_US/guides-and-manuals/detail.page?&LegacyDocID=MIGR-52881
Fred
T61 + X201i

How to use auto increment with "nchar" data type

Hello
I have a table that I want the value in one column to be generated automatically with "T-XXX" pattern which
"XXX" is a number. Can Microsoft SQL Server do that?

Hello,
Not directly.
You could use an integer column with "Identity" and then add a calculated column to generate the required pattern, like
'T' + convert(varchar, YourIntColumn)
Olaf Helper
[ Blog] [ Xing] [ MVP]

Why are the NI-DAQmx Base for LabVIEW options grayed out using custom install (with Action:Skip)?

I'm trying to install NI-DAQmx Base 3.7.0 for LabVIEW 2013 (LV is installed). When I try Standard Install, it doesn't install for LabVIEW (only the Common and C and USB tools), but gives a successful installation message.
When I try Custom Install, all of the "...for LabVIEW 20XX" options are unchecked, grayed out and the Action says "Skip".
I'm trying this on a 2011 MacBook Air 11" running OS 10.9. LabVIEW runs fine.
Thanks for any suggestions.
Solved!
Go to Solution.

Hi,
OS 10.9 is not officially supported by NI with the DAQmx Base 3.7. This information is from the description of the driver (http://www.ni.com/download/ni-daqmx-base-3.7/4272/en/):
OS Support—NI-DAQmx Base now supports the following versions of Mac OS X:
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
So this seems to the be the problem. Either you choose another OS version or wait for a new driver which supports 10.9
Regards,
Michael

Using 'Auto-Tune' with Final Cut Express HD...

Is it possible to use the program 'Auto Tune' (or a similar program) to correct the pitch imperfections on an audio track of an AIFF file - then re-import it into the audio track of a Final Cut Express HD project?
Thanks,
Jim

I have never used such a program, but it stands to reason that this should work as long as you export it from the program to a FCE-friendly format.

Using Auto-Install with Cisco 2504 WLC

Similar Messages

Maybe you are looking for