Using autofill with a minimum length for songs ?

Hey guys,
Is there a way to set an option on the AutoFill function in iTunes ?
Everytime I use the autofill, I always get some songs in the list that are less then 2 minutes !
But these songs are most of the times "intro's", "outro's" or "skits"... so I don't want them in the autofill list.
Any setting to indicate a minimum lenght for autofilling ?
Greets
Glenn
Dell   Windows XP Pro  

AcousticDi wrote:
Is there a way to snap to locations in it quickly with {out?} manually scrolling and clicking?
no
Guessing I should use the "higher" or "highest" quality settings in the Share dialog box?
it depends what you plan to do with the file.
uncompressed is highest fidelity, but very large in size. mp3 and aac are compressed,making them smaller, at the cost of fidelity.
uploading full quality 44.1K 24-bit files is not very realistic. at the same time, trying to Master an mp3/aac is rather silly since you're starting out with a file that's had 90% of its data thrown away.

Similar Messages

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • How to use same Data Type and Length for two fields

    How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
    SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
    FROM bsik
    INTO TABLE it_bsik
    WHERE bukrs = p_bukrs
    AND lifnr IN s_lifnr.
    IF it_bsik IS NOT INITIAL.
    SELECT belnr gjahr awkey awtyp
    FROM bkpf
    INTO TABLE it_bkpf
    FOR ALL ENTRIES IN it_bsik
    WHERE belnr = it_bsik-belnr
    AND gjahr = it_bsik-gjahr.
    IF it_bkpf IS NOT INITIAL.
    SELECT belnr gjahr lifnr xblnr
    FROM rbkp
    INTO TABLE it_rbkp
    FOR ALL ENTRIES IN it_bkpf
    WHERE belnr = it_bkpf-awkey+0(10)
    AND gjahr = it_bkpf-awkey+10(4).
    ENDIF.
    ENDIF.
    Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
    Kindly clarify.

    Hi Saurabh,
    Please see the example code that I have developed for you. It will help you solve the problem.
    REPORT ZTEST_3 .
    tables : BKPF.
    data : begin of it_bkpf occurs 1,
             belnr type RE_BELNR,
             awkey type awkey,
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf.
    data : begin of it_bkpf1 occurs 1,
             belnr type RE_BELNR,
             awkey type gjahr,              " change the data type
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf1.
    data : begin of it_rbkp occurs 1,
             belnr type BELNR_D,
             gjahr type gjahr,
             lifnr type LIFRE,
             xblnr type XBLNR,
           end of it_rbkp.
    select belnr
           awkey
           awtyp
           gjahr
           from bkpf
           into table it_bkpf
           where BUKRS = 'TELH'.
    loop at it_bkpf.
    it_bkpf1-belnr = it_bkpf-belnr.
    it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
    it_bkpf1-awtyp = it_bkpf-awtyp.
    it_bkpf1-gjahr = it_bkpf-gjahr.
    append it_bkpf1.
    clear it_bkpf1.
    endloop.
    select  belnr
            gjahr
            lifnr
            xblnr
            from RBKP
            into table it_rbkp
            for all entries in it_bkpf1
            where belnr = it_bkpf1-belnr
    This is just an example. Change the fields according to your requirement.
    Regards
    Abhii
    Edited by: Abhii on Mar 9, 2011 9:08 AM

  • Using iPhone with portable players meant for iPod

    Is it supported to use iPhone with stereo players meant for iPod? (Bose/Klipsch)
    I put my iPhone in the dock of my Klipsch player that I listen to my iPod with and immediately it screeched feedback through the speakers. Should I just assume that iPhone isn't compatible with these types of players?

    The screeching is GSM interference/feedback. If you wanted to use the iphone with the speakers, try placing it in airplane mode first. That will keep the phone features turned off and keep the interference from happening. On the downside, you won't be able to receive phone calls during that time.
    I would think that they make "supported" speakers, but pretty much the only difference would be that the speakers would be shielded to keep the feedback from happening.

  • How do I use autofill with my Iphone?

    I have Itunes 10.7 on windows and have watched a few videos on how to use autofill, but it is not appearing on my screen when my Iphone 4s is connected. I have also tried changing the settings in my Iphone by opening the device and going into the summary tab and then clicking manually manage music and videos but it will not let me apply this setting without erasing all of my content ! Please help (:

    According to this document, T-Mobile in the Netherlands does not support Personal Hotspot, only Vodafone does, thus that setting will not appear for you.
    http://support.apple.com/kb/HT1937

  • Is anybody use LR with Photoshop Elements 6 for Mac ?

    I've just bought Photoshop Elements 6 for Mac on a PM G5 (OS 10.5.2). PSE works but LR don't find it as external editor. I have done what is the Knowledge Base, I've deleted all adobe products (and all related files in /Library an home/Library) and reinstall only PSE 6 and LR 1.3.1 .
    In KB, they tell that LR uses a com.adobe.Photoshop.Elements.plist but PSE 6 creates a com.adobe.PhotoshopElements.plist (without a dot between Photoshop and Elements). I've tried to duplicates this file but that does not work.
    I don't understand why LR does not provide a way to specify where Photoshop (or Elements) is. I don't know what to do now.

    For some reason Adobe decided to change the bundle name for the PSE6 application from com.adobe.photoshop.elements to com.adobe.PhotoshopElements. This change is also reflected in the Preferences file names.
    Lightroom (1.3.1 and 1.4) seem to use the MacOS core services to find PSE - but use the com.adobe.photoshop.elements (and com.adobe.photoshop for full PS) bundle names.
    The immediate fix, if you're handy with a hex editor, is to go into the Lightroom application bundle, find the file AgEditExternally.lua and patch the string "com.adobe.photoshop.elements" in the file so it becomes "com.adobe.PhotoshopElements" (remember a null terminator and make a copy of the file first!).
    If that's Greek to you then either live with it and wait for an official fix or set up Elements 6 as the 'Additional External Editor'.

  • Can be use facetime with any smartphone (Samsung, for exemple)

    Can be use Facetime with any smartphone (Samsung, LG and so on...) ?
    Thanks !

    "With FaceTime, you can participate in video calls with another iPhone 4, iPad 2, iPod touch (4th generation), or a FaceTime for Mac user over a Wi-Fi network connection. "
    http://support.apple.com/kb/HT4319

  • Minimum length for stills ?

    Hi everybody,
    I wanted to import stills in a movie in a way that they would not look so much as stills.
    I thought I would reduce the length of time to 1 sec.
    When I wanted to render that part (a few images) I got a message saying "general error"
    Is there a minimum length of time required for the stills ?
    thanks in advance
    Ivan

    RVB? You mean RGB?
    From the original picture that I import, and which is about 5 minutes, what is the best way to reduce the length to a few images ?
    I don't understand. Pictures don't really have a LENGTH. I mean, FCP can import them as 1 frame or 5 min....and that is in the User Prefs. But reducing the original picture to a few images...that throws me. The picture...a STILL picture, is ONE image. So how can you reduce ONE image to a few images?
    Shane

  • I am having problems with an older ipod running 1.1.2 firmware trying to use earbuds with volume controls made for ipod. any suggestions?

    I am problems with an older Ipod classic running 1.1.2pc using earbuds with Ipod inline remote. The earbuds work fine with my new Ipod but not the older one. Any suggestions?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I have an itunes gift card balance on my account however I want to use my credit card to pay for songs. It automatically uses my balance and doensn't give me the option of using my credit card. In detail how do I change it or must I use my balance first?

    I have an itunes gift card balance on my account however I would rather use my credit card to pay for my music downloads. I cannot find an option to choose credit card over my balance, it just automatically uses my gift card balance instead. Is there a way to change this? I have gone to account settings but cannot find a way to do this. Does anyone have any detailed information on how this could be achieved? Is it even possible? Thanks so much in advance!

    Sorry, but there's no way to force the iTunes Store to use your credit card. If there's a credit balance available, purchases will be deducted from that first.
    Regards.

  • Using features of a Podcast Track for Songs ...

    I am experimenting with adding a Podcast Track to a Song, and setting up the chapters the same as my arrangement: Verse, Chorus, Bridge, Etc. This allows me to click to a section quickly with the insertion point right where I need it. (This is the only thing I really miss from my VS-1680 -- the location markers to get to a part in the song quickly!)
    So far, it seems to work fine. I Share -- Send Podcast to iTunes and it seems to play regularly with no glitches. Does anyone know of why I would NOT want to do this? Is Sending a Podcast the exact same as sending a Song? Seems like the chapter markers can contain URL's and Artwork, but I am not utilizing that. Thanks for any insights...

    AcousticDi wrote:
    Is there a way to snap to locations in it quickly with {out?} manually scrolling and clicking?
    no
    Guessing I should use the "higher" or "highest" quality settings in the Share dialog box?
    it depends what you plan to do with the file.
    uncompressed is highest fidelity, but very large in size. mp3 and aac are compressed,making them smaller, at the cost of fidelity.
    uploading full quality 44.1K 24-bit files is not very realistic. at the same time, trying to Master an mp3/aac is rather silly since you're starting out with a file that's had 90% of its data thrown away.

  • Can someone help me synce my old G5 Motorola to my snow leopard laptop so I can use Quitktime with video screen capabilities for demo purposes and a job I have with a major website? Thanks!

    Is there anyway that I can sync this Motorola G5 dual, OS 10.5.8 with my ibook OS 10.6.8 so I can use the quicktime application on the Mororola? I need to network the two computers and if someone could kindly tell me how to do this with either wifi, USB, orFirewire, I'd be very grateful. My ethernet connection is in use and I only have one and no hub. Doing this will give me the ability to work for a site that needs my expertise in recording but I have old equipment right now on the recording end. No chance to upgrade at this point as we're broke and I'm severly injured, so I am trying to find a workaround that will let me access this copmuter, with snow leapord to work with the old one with (Motorola G5 dual w/10.5.8). It means a few bucks to us if I can make it happen, and my family really need to dough. It  will keep me from having to convert things to a youtube format, take the extra time involved to do that, when, instead, I could just take screen recordings instead. Unfortunately, I don't have Pro Tools on this computer or all would be fixable.
    I'm really hoping that you or someone else can help me get these two macs synced so I can do this. DO you think you can help me? Thanks so much! Scotty Goldberg

    Thanks so much for your reply but that won't help in my current situation. Maybe I didn't make it clear. The latest version of Quicktime as new as it sounds doesn't support screen recording on a powermac G5 Motorola chip with OS 10.5.8 which is the highest os I can go with that machine. If I can sync the two computers so I can get the application to record from my newer computer then I'm ok. I just don't have the recording application for audio that I'm using to demo for the website on the laptop as it's about 10,000 dollars. So, I have to use the older computer to do the audio presentation and try to get the newer computer synced to it so I can use the new version that works on snow leopard to record a screen shot that will hopefully appear on my laptop instead of the old machine. Hope that makes sense. It's a bit confusing but in a nutshell it's like this:
    1. I am a Pro Tools Instructor which is the state of the art application and recording device for audio and movie scoring and I have a new job where I make small snippets of tips using Pro Tools which I'd like to record with quicktime on screen as they happen
    2. the best version of Quicktime Pro available for the Power Mac, OS 10.5.8 will not do screen recording on it.
    3. I can use the Quicktime application from my newer laptop but I need to sync it to the old machine
    4. I'm hoping but I don't know, if I do this, that I can record Pro Tools in action from my new machine buy seeing it on this laptop screen and then recording it with the new quicktime.
    5. If I can sync the two computers, I'm hoping this can happen but I can't use my ethernet connection as I have it used to connect to my recording console and can't afford to buy anything new like an ethernet hub yo connect the two so I'm hoping that there's another way to connect them.
    I hope that makes sense and that possible you or someone else can help. Thanks so much! Scott

  • Is it possible to use variable with interval in BEX for filter or pl funct.

    Hi,
    we have filters in which variables with interval are being used, as well as planning functions in which a variable with interval should be used.
    In the planning modeler everythings works fine. But I have problems to fill values for these type of variables. The error message "specify a value for variable xxx " is always generated. I know it is possible to do this (with VAR_LOW & VAR_HIGH instead of VAR_VALUE).
    Can someone please help?
    regards
    D

    Hello Dries,
    yes, it's possible. You have to use VAR_VALUE_LOW and VAR_VALUE_HIGH.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Use ABES with Ibahn while traveling for multi access

    I want to use both my iphone and MacBookPro with my AirportExpressExtreame while traveling and staying in hotels. the Ibahn access point want to charge me 2X's for each device, I have been able to do this with the standard express but since upgrading to the extreme i cant find the option to reassign. Is there a way to let the ABES to assign ip's to trick the IBAHN from charging me twice?
    Thanks
    Mike

    Thanks duane
    Under the Internet tab of the Airport utility there is a Connection Sharing drop down with these choices
    *Off (Bridge Mode)*
    *Share a public IP*
    *Distribute a range of IP's*
    I have it set to off but not sure where and how to set up to share a single address.

  • Howto use jsp with where-clause restriction for viewObject

    hello there,
    i am currently trying to figure out how to pass parameters via url to the jsp,
    so that the corresponding viewobjects where clause can be extended and i only get the select-results that i want. i am familiar with doing this in a stright java-environment but don't know how to implement it in a jsp-client.
    does anyone know something about this or can name me a ressource i can read about that.
    Thanx
    Selim Keser

    thank you, but i have only 19 days left for
    my diploma and nobody in this company can help me with this issue.
    what i need is an example or something like a reciept about what to do
    to achieve the following:
    I want to type in an url like:
    localhost:8080/myapp/browse.jsp?customerid=123
    so that i can extend the where-clause in my ViewObject
    and only see the rows of customer 123 in my jsp.
    it is a bit hard for a newbie to figure out how to pass down the parameters way down to the ViewObject. I am shure that this is easy to do once one understands the how it works. This is my first "Web-Experience" and I am running out of time.
    Thanx
    Selim Keser

Maybe you are looking for