Using AXs with a Gateway Router...help needed

For years my wife and I lived in a home which ran an AirPort Extreme for all our internet and music needs. We've recently moved into a new home which already had a DSL/Gateway wireless router installed (as part of AT&T's HomeZone packagge). After giving serious thought to my desire to have a new wireless sound system for my new home, I bought the following at the Apple store:
- Two AirPort Express;
- A Bose Companion 3 Series II powered speaker system; and,
- An iPod HiFi.
I've hooked both the Boze speaker & HiFi systems up to their own AirPort Express, and they sound great when I run my iTunes through my wireless system for +that particular+ AirPort.
The problem is is that I can't seem to get both sound systems to play simultaneously, nor can I connect to my internet (Gateway) and run either (or both) of these speakers.
Any hints as to HOW I can get music to both AirPorts while still being able to surf the net on my Gateway router? Is there a way to bridge both AXs to the Gateway?
I know...I'm a luuddite. Thanks in advance for any suggestions.

Hello mrviognier. Welcome to the Apple Discussions!
Any hints as to HOW I can get music to both AirPorts while still being able to surf the net on my Gateway router?
Yes, you just need to configure the AirPort Express Base Stations (AX) in "client mode."
AirPort Express Base Station (AX) - Client Mode Setup
o Plug the AX into a power outlet.
o On your computer, join the wireless network created by AX.
o Open AirPort Admin Utility. (Mac users: Find it in /Applications/Utilities/. Windows users: On the Start menu, point to All Programs and click AirPort.)
o After AirPort Admin Utility opens, the name of your AX appears in the list. Select it, then click Configure.
o Enter the administrator password if prompted.
o Click the AirPort tab.
o Enter a name for your AX in the Name field. (This name is how it will appear in AirPort Admin Utility; it may be different from the AirTunes remote speaker name. (Note that AirPort Setup Assistant does not allow you to differentiate these names, but AirPort Admin Utility does.)
o If your AX does not already have an administrator password, click the Change Password button to enter one. This password can be different from any network password, and is used for just changing settings on AX.
o In the same pane, under the AirPort Network heading, change the Wireless Mode from "Create a Wireless Network (Home Router)" to "Join an Existing Wireless Network (Wireless Client)."
o Type the name of the wireless network you want to join in the Network Name field. (Note: If you're using AirPort Admin Utility in Mac OS X, you may be able to choose the network from a pop-up menu. This is the name (or SSID) of your current wireless network with the Trendnet router.)
o If the wireless network is password protected, you will need to enter the password. (Mac users: Click Security Options, choose the level of password encryption from the Wireless Security pop-up menu, then enter the password. When finished, click OK. Windows users: Click Wireless Security, choose the level of password encryption from the Wireless Security menu, then click "Set WEP Password" to enter the password. When finished, click OK.)
o Click the Music tab to enter the name that will appear in iTunes as your AirTunes remote speakers. You can also enter a password to prevent others from streaming music to your speakers.
o Finally, click Update to send your new settings to AX.
Once the AX has had a minute or so to restart, it should join the existing wireless network, as indicated by its status light turning solid green.

Similar Messages

Issue with using xmltable() with xmltype() in plsql--help needed urgent

HI All,
I am trying to use XMLTABLE() to get the data from the xmltype(), I used the below query, when I run this, I get the syntax error "ORA-00906: missing left parenthesis--I am struggling to find out which paranthesis I am missing
00906. 00000 - "missing left parenthesis"
*Cause:
*Action:
Error at Line: 9 Column: 22"
SELECT
hours.OpeningTime, hours.ClosingTime, hours.DayOfWeek
from table1 tab,
XMLTABLE(XMLNAMESPACES(DEFAULT 'https://xxx.xxx.xx.gov/'),'/ProviderApplicationDTO/ProvOperationHours/WeekHours/KeyValuePairOfFirstDayOfWeekHoursOfOperation'
PASSING tab.column --this column is of xmltype()
COLUMNS
OpeningTime varchar2 PATH '/ProviderApplicationDTO/ProvOperationHours/WeekHours/KeyValuePairOfFirstDayOfWeekHoursOfOperation/Value/OpeningTime',
ClosingTime varchar2 PATH '/ProviderApplicationDTO/ProvOperationHours/WeekHours/KeyValuePairOfFirstDayOfWeekHoursOfOperation/Value/ClosingTime',
DayOfWeek varchar2 PATH '/ProviderApplicationDTO/ProvOperationHours/WeekHours/KeyValuePairOfFirstDayOfWeekHoursOfOperation/Key') hours
Where column = 70;
<ProviderApplicationDTO>
<ProvOperationHours>
<WeekHours>
<KeyValuePairOfFirstDayOfWeekHoursOfOperation>
<Value>
<OpeningTime />
<ClosingTime />
</Value>
<Key>Sunday</Key>
</KeyValuePairOfFirstDayOfWeekHoursOfOperation>
<KeyValuePairOfFirstDayOfWeekHoursOfOperation>
<Value>
<OpeningTime />
<ClosingTime />
<IsOpenAM>AM</IsOpenAM>
<IsCloseAM>PM</IsCloseAM>
</Value>
<Key>Monday</Key>
</KeyValuePairOfFirstDayOfWeekHoursOfOperation>
<KeyValuePairOfFirstDayOfWeekHoursOfOperation>
<Value>
<OpeningTime />
<ClosingTime />
</Value>
</ProvOperationHours>
</ProviderApplicationDTO>
Edited by: 804681 on Jan 7, 2011 8:22 AM

Interesting... it seems they either changed the comma in between 10g and 11g or there is a bug in the 11g documentation. I think I will report it to the documentation forum. Since the 11g gif description includes the coma. http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/img_text/xmltable.htm
I guess Michaels found the real bug. You can always count on him when it gets to XML-action.

E1700 Advanced Routing - help needed

I am having trouble creating static routes through my Linksys E1700 (Rev v1, f/w 1.0.02. I keep getting errors on all routes I try to enter. Either I get a complain that a part of an IP adress is not in range 1-233 or I get the error message "Invalid route" when trying to save the route. Can anyone post what restrictions are enforced on the entered static routes? What I want to achieve is access to a separate ADSL modem that the router is attached to. That means that I have assigned the modem an IP adress that is not on the local network and need the router to pass this adress through the WAN port, but not to the ISP gateway. Something along the lines of: Local address of router and IP range used by DHCP in the router: 192.168.0.0/24Local address of ADSL modem: 192.168.1.1/24 I want to route: 192.168.1.1/32 through WLAN interface with gateway 0.0.0.0 Any ideas why the router does not allow me to do this? Also, if I could get any type of route through the E1700 WLAN interface I could assign my modem to match that (as long as it is not an IP address I need to use :-) ) But I have not been able to set up any route to the WLAN interface with gateway 0.0.0.0. /Nils

I am having trouble creating static routes through my Linksys E1700 (Rev v1, f/w 1.0.02. I keep getting errors on all routes I try to enter. Either I get a complain that a part of an IP adress is not in range 1-233 or I get the error message "Invalid route" when trying to save the route. Can anyone post what restrictions are enforced on the entered static routes? What I want to achieve is access to a separate ADSL modem that the router is attached to. That means that I have assigned the modem an IP adress that is not on the local network and need the router to pass this adress through the WAN port, but not to the ISP gateway. Something along the lines of: Local address of router and IP range used by DHCP in the router: 192.168.0.0/24Local address of ADSL modem: 192.168.1.1/24 I want to route: 192.168.1.1/32 through WLAN interface with gateway 0.0.0.0 Any ideas why the router does not allow me to do this? Also, if I could get any type of route through the E1700 WLAN interface I could assign my modem to match that (as long as it is not an IP address I need to use :-) ) But I have not been able to set up any route to the WLAN interface with gateway 0.0.0.0. /Nils

Westell router - help needed

Hi, hope someone can help me with this westell router problem.
I have A90-750115 Vesalink router. My cable company set me with a static IP address. They told me to set my router to pull
static IP instead of dynamic IP from the modem. but the problem is I do nto know how to set the static IP on the router.
I checked online manual, but either I don't understand or it was not stated in the manual.
anyone knows how to set the static ip address on this router? or similar router in Vesalink line?
thanks

#1 I take it you have all of the settings, not just the Static IP.
Subnet Mask, Default Gateway and DNS Servers.
#2 If not, you need to get that first,
#3 I take it your cable modem is connected to the Uplink / E1 port of this Westell.
Source: http://www.westell.com/images/extranets/pdf/VersaLink_7500_User_Guide.pdf
on page 9 out of 186 pages.
#4 And I take it, you did not change the LAN IP of the Westell
#5 Go to 192.168.1.1 and log-in as need be to this Westell.
#6 If prompted to change the Default Password (page 32 to 34 out of 186 pages), do so.
#7 In the router go to Network Connections -> Versa Port.
#8 With Ethernet WAN Uplink Selected, change the connection type to Routed IP Address.
#9 Where it says, tunneling say disable.
#10 Then the next two option are:
a) Enable DHCP Client
OR to
b) Disable DHCP Client.
#11 Select Disable DHCP Client.
#12 Then enter in the Correct settings that you were given.
#13 Click on Apply
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Accessing micro sd content synced with my Gateway - PLEASE HELP!!!

My charging port failed, Verizon sent me a new phone, I had just synced with my Gateway computer (which ALSO has a micro SD card slot), I can access photos that were on my phone, how do I access the other relavent info I'd like to recover??? ie. Contacts, Messages, Documents
I am using Windows 7 Home Professional, and due to it's design, searching from the desktop is not giving relevant results
I just find it hard to believe that there's no work-around, need a definitive answer!
MUST return old phone tomorrow, don't want to give it up until I have to, but time is running out

Have now accessed Contacts, BUT only pulled partially so... So it IS possible!

Extreme as Remote using WDS with Linksys WRT54G router ??

I have seen that the Extreme cannot be used as a remote using WDS with a D-Link wireless router. Is the same true with Linksys wireless routers? I thought I would pose the question before purchasing my 3rd (2 dead, bad luck?) Express or purchasing two Extremes.
I will eventually gravitate towards using an Extreme as my main base station but I do need a remote for wireless printing. I was hoping to put off purchasing an Express until a later date.

Since it doesn't appear that everyone has gotten it to work with this router does that mean special tweeks are required? Is it hit and miss? The wireless router has the latest firmware updates and my network is running with WPA2. Comcast is my provider.

Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO Corporation

Hello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI

Using XE with ODBC Gateway

Hi,
I've found this in XE licence: Generic connectivity: http://download.oracle.com/docs/cd/E17781_01/license.112/e18068/toc.htm#BABIDICB but I would like to be sure- am I allowed to use Oracle's ODBC Gateway [Generic Connectivity] with XE, at no cost?
Regards
Bart Dabr
Edited by: BD on Oct 3, 2011 4:04 PM

Hi Bart,
well, you could ask some "Oracle VAD", or search the online store for a price - you won't find any.
I'd say this is a sure thing when you put all "evidence" given above together.
I cite them to make it obvious:
Oracle Database Gateway for ODBC
Oracle Database Gateway for ODBC can be installed and used on a machine different from the machine where the Oracle Database is installed and used. It is not >necessary to obtain a separate license for the machine running Oracle Gateway for ODBC.
ODBC support Yes (Windows and UNIX)"Database Gateways", on the other hand, are listed in the [url http://www.oracle.com/us/corporate/pricing/technology-price-list-070617.pdf]US Oracle Technology Commercial Price List as follows (watch the heading)
Integration Products
Mainframe Integration Gateways
Database Gateway for Sybase
Database Gateway for SQL Server
Database Gateway for Informix
Database Gateway for Teradata
Database Gateway for DRDA
Database Gateway for APPC
Database Gateway for WebSphere MQThe list ends there, ODBC is not on it.
If this all doesn't convince you, you still have the option to contact a VAD.
-Udo

IPhone 3G 8GB Crashes when syncing with iTunes. URGENT HELP NEEDED.

I have latest iTunes and OS on my iPhone 3G...
Every time i plug my iPhone in it begins to sync and then iTunes will freeze and not respond..
I have tried re installing iTunes.. I can't reset my iPhone as i can't create a backup..
URGENT HELP NEEDED PLEASE!

I don't have an iphone, but if it's anything like my click-wheel ipod, a reset doesn't delete anything.
It just resets the ipod's operating system, kind of like a PC restart. Did you try this Sleep/Wake button thing mentioned here?
http://support.apple.com/kb/HT1737
Maybe it's a podcast of voice memo causing the problem like it did for this person
http://discussions.apple.com/message.jspa?messageID=10907809#10907809
That's all I got. You might have better luck on an iPhone forum. Everyone there would probably have one. Like I said, I don't.

Can't connect to skype, get invalid port, using laptop with iphone as router

can't connect to skype, get invalid port, using laptop with iphone as router

can't connect to skype, get invalid port, using laptop with iphone as router

Problems with my new E5, help needed

I just got me a new E5 about a week ago. Despite reading a lot on this forum, I still have two major issues setting up this device; so I need some help. Problem number one is that I cannot set up my email. I have "aol" email that falls under "other" in the email set up section. Some of the screens listed in Pool of Knowledge subsection (like choosing POP3 or IMAP) does not even come up in my e5 during email setup screens. What to do to set up aol email account.
Problem number 2 is that I cannot transfer my contacts and other data from old device (Nokia X2-01) to the new e5. I paired them easily using Bluetooth but when it get to the point of transferring the data, I hear a "click" sound in the e5 and "Bluetooth disconnected.... " error message comes on. I have tried upteenth times but I get the same result. When I tried to transfer contacts one by one, using Bluetooth business card option it works; but I have over 800 contacts and I would like to use the switch route. What to do to solve this problem?. I hope I do not have a faulty device.
With God, all things are possible

I can't help you with the contacts problem, but have you made any progress with email? Just because you pick the Other category, doesn't mean you need to enter every server detail. I use Earthlink email, but simply typing my email address causes the wizard to fill in every other detail besides my password. (Curiously, it always uses the wrong SMTP server.) But once setup finishes, I can change any of the settings. I hope that helps. (And BTW, the above may not apply if you opt for using Nokia's push service.)

Setting up HP L-7590 via usb to wireless router, help needed..!

Hi,
I have been using my L7590 via lan to a wireless router for a few years... that was perfrect...
Recently I had to change router because of change of ISP. The new router is a Huawei B683... the problem I have is that this router does not allow LAN connections from the router ...!! It does has a USB port that is for the printer...
I am unsure as to how I setup the printer connected via usb to the router....
Do I use the network installation setup...? Or do I use the USB setup...??
Any help is greatly appreciated...
Thanks

Hi,
Connecting the printer to a router's USB port (aka. print server) will only allow you basic print functionality , it won't provide you any scan functionality, faxing from the computer, ink levels or any operation of the HP Solution Center program.
To get full functionality you must work with the provided functionality which means USB connection directly to a single PC or Ethernet connection to a router.. therefore using an Ethernet router will be the preferred solution for you.
In order to setup the printer as you described you should connect the printer to the USB port and go to Control Panel > System. click add a printer and add it through the network.. there might be a need to enter your wireless homepage to enable the printer through the USB, there might be additional setup information in there.. that veries between different print servers and you may contact Huawei support or your ISP for any assistant within the print server configuration.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Show HashMap in Datatable. UIColumn with embedded Datatable. Help Needed

Hi,
I am trying to display a HashMap in a datatable where the values for each key is an ArrayList e.g.
        ArrayList al = new ArrayList();
        al.add("AA");
        al.add("BB");
        al.add("CC");
        HashMap hm = new HashMap();
        hm.put("ONE", al);
        ArrayList al2 = new ArrayList();
        al2.add("AA2");
        al2.add("BB2");
        al2.add("CC2");
        hm.put("TWO", al2);Now I have a Datatable with two columns. First column shows the key and the second column I again have
a datatable to show the ArrayList. So I will have one row with a key and the values again shown in a
datatable. So far I no luck and need some help on how to achieve this. Here is the index2.jsp code I have:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<f:view>
<html>
    <head>
      <meta http-equiv="Content-Type"
            content="text/html; charset=windows-1252"/>
      <title>index2</title>
    </head>
    <body><h:form binding="#{backing_index2.form1}" id="form1">
    <h:dataTable value="#{backing_index2.entrySet}" var="var1"
                     binding="#{backing_index2.dataTable1}" id="dataTable1" border="1">
          <h:column>
            <f:facet name="header">
              <h:outputText value="Keys"/>
            </f:facet>
            <h:outputText value="#{var1.key}"/>
          </h:column>
          <h:column>
              <f:facet name="header">
                  <h:outputText value="Values"/>
                </f:facet>
              <h:dataTable value="#{backing_index2.entrySet}" var="var2"
                         binding="#{backing_index2.dataTable2}" id="dataTable2">
                  <h:column id="col2">
                    <h:outputText id="out3" value="#{var2.value}"/>
                  </h:column>
            </h:dataTable>
          </h:column>
        </h:dataTable>
    </h:form></body>
</html>
</f:view>And here is the backing bean Index2.java I have:
package project1.backing;
import java.util.ArrayList;
import java.util.HashMap;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.component.html.HtmlForm;
public class Index2 {
    private HtmlForm form1;
    private HtmlDataTable dataTable1;
    private HtmlDataTable dataTable2;
    private List entrySet;
    private HashMap hm;
    public Index2() {
        ArrayList al = new ArrayList();
        al.add("AA");
        al.add("BB");
        al.add("CC");
        hm = new HashMap();
        hm.put("ONE", al);
        ArrayList al2 = new ArrayList();
        al2.add("AA2");
        al2.add("BB2");
        al2.add("CC2");
        hm.put("TWO", al2);
        entrySet = new java.util.ArrayList(hm.entrySet());
     //here it only prints two rows as i have two keys but on the output it
     //does not come up fine
        for (int i = 0; i < entrySet.size(); i++) {
            System.out.println("==== " + entrySet.get(i));
    public void setForm1(HtmlForm form1) {
        this.form1 = form1;
    public HtmlForm getForm1() {
        return form1;
    public void setDataTable1(HtmlDataTable dataTable1) {
        this.dataTable1 = dataTable1;
    public HtmlDataTable getDataTable1() {
        return dataTable1;
    public void setDataTable2(HtmlDataTable dataTable2) {
        this.dataTable2 = dataTable2;
    public HtmlDataTable getDataTable2() {
        return dataTable2;
    public void setEntrySet(List entrySet) {
        this.entrySet = entrySet;
    public List getEntrySet() {
        return entrySet;
    public void setHm(HashMap hm) {
        this.hm = hm;
    public HashMap getHm() {
        return hm;
}Now when I run this application the keys are shown in the respective column but values are coming up as
[AA2, BB2, CC2] in one row rather in a separate Row as I am using a Datatable inside UIColumn to show the values.
Here is what I see in the output:
keys        Values
TWO         [AA2, BB2, CC2]
            [AA, BB, CC]
ONE         [AA2, BB2, CC2]
            [AA, BB, CC] As above output is not correct as it shows both list values in front of each key rather than what those
keys are tied to. I wanted the following output:
keys        Values
ONE         AA
            BB
         CC
TWO         AA2
            BB2
         CC2So I can do sorting pagination on the values datatable. But currently the output is not shown correctly. Any help
is really appreciated. My hashmap will be populated dynamically so wants to show the key and values in separate column
but also need to show the values in an embedded datatable as the list can be huge.

Rather use a Collection of DTO's. See http://balusc.xs4all.nl/srv/dev-jep-dat.html for some insights. There is also a section "Nesting datatables".

Wireless Router Help Needed! Please and Thank You

My warrenty has expired on my router, and Linksys is conveniently not able to help me get my router back on track. I have had the same problem several times, and have had the steps wrote down to fix it however, I have recently moved into a new place and conveniently lost the paper.
Usually it was a matter of just cloning my mac ID and it would work, in which I tired that with no success! Im frustrated and I need my internet for my schooling.
If anyone could help me it would be GREAT! Im not able to be on the internet to check so often as to if I have a reply on here, so if you feel you can help please call me!
Thanks in advance!
Stephanie
(Mod note: Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 05-21-2009 08:29 AM

First Connect the Modem to the Linksys Router on the Internet Port and then connect your Computer to the Linksys Router on the Port no.1.
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link

Want to use Logic 8 Pro for Podcasting, help needed

I have a few problems. I just switched over to Logic after using ProTools for 4 years so I'm a newbie. I'm about to start a podcast soon and I want to use Logic 8 Pro to do so. Is there a book that someone can recommend me for getting familiar with Logic?
Here are the things I need to get done:
I have a mixer and I need to know how to record the sounds playing through my computer to end up in Logic. I basically want to be able to capture the audio playing on my computer and have that be on the podcast. How do I do this?
Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
I'd appreciate anyone who could IM me to help me further with Logic if I have a quick question or anything. My AIM screen name is DirtyVibes. Any help would be appreciated.
Thank you,
-RandomSkater

Is there a book that someone can recommend me for getting familiar with Logic?
Yes, the Getting Started manual, you can download it from Apple.
I have a mixer and I need to know how to record the sounds playing through my
computer to end up in Logic. I basically want to be able to capture the audio
playing on my computer and have that be on the podcast. How do I do this?
I'm not sure what you are asking here. If you want to record the whole output of your computer, I recommend using a virtual audio driver like Soundflower or Jack.
Secondly, I'm confused about what Input 1 and Input 2 are. What is the difference?
Input 1 is the input marked "1" on your audio interface (or the left channel on a stereo pair).
Input 2 is the input marked "2".
If your audio interface has more than 2 inputs, they will all show up, so you can record different inputs to different tracks if required.
You might be better off using Garageband to record your podcasts, it's simpler and has dedicated podcast functions (like adding iTunes artwork and so on).

Using AXs with a Gateway Router...help needed

Similar Messages

Maybe you are looking for