Using BC-XMW in mini ABAP engine 6.20

Hello
First of all I hope I'm in the right forum, if not I appologize, and hope some one points me to the right one.
I installed the 6.20 test version and the GUI which seem to work OK. It is my intention to use CCMS via the BC-XMW interface. To use this interface I created a CSMREG user as outlined in the documentation of BC-XMW. This user must be used in transaction SICF, after expanding default_host/sap/bc/ccms/monitoring/CCMS_XML I enter CMSREG and password, when I try to save the data I get:
System setting does not allow you to change R3TR SICF
CCMS_XML 7X5HX874X2IKO7GKP11N923G7L
What should I do to circumvent this problem
Any help will be greatly appreaciated
Johan

Hello experts,
                    We are using BMC Performance Manager agentless solution for monitoring our SAP Landscape. I want to integrate the BMC Performance manager with Solution Manager so that both the systems can send and receive monitoring data between them.
     I have been informed that the way to do this integration is using BC-XMW interface. I am not able to find correct documents for this.
        Someone please guide me for this integration process.
Thanks
DG

Similar Messages

Error in system logs of the abap engine

Hello All,
I got a incident for "error in system logs of the abap engine".When i checked in SM21,
13:50:18 BTC 024 001 SETUPADMIN SM59 Q0 W
SETUPADMIN deletes RFC destination
0000000000011DECBA9958E212E09B2C
05782 Background Processor No. 024 SETUPADMIN
1 SM59 /ITSC/DSA_PERIODICAL T Transaction Problem STSK
A destination has been deleted in SM59, destination
maintenance of RFC.
Problems can occur if this destination is still used in existing
ABAP
I checked in sm37,the job /ITSAM/HEALTHCHECK which
runs under the program /ITSC/DSA_PERIODICAL with frequency
10 mins is in finished state.
Kindly help me out, why this logs is always written in sm21 even if
the job got finished .
Thanks & Regards,
Harshavardhan

i have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
        INTO TABLE GT_VIQMEL
        FROM VIQMEL
        WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal.

XSLT Mapping on ABAP Engine

Hi All,
I am trying to implement an XSLT mapping on the ABAP Engine. I went to the Transformation Workbench(SE80).I have created 4 levels of packages (Structure->Main->then 2 more levels) and included Package Interface SAI_TOOLS in 'Use Accesses' tab.
I have also set com.sap.aii.repository.mapping.additionaltypes=R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
in the Exchange Profile.
Now I want to create the tranformation (ST or XSLT) so that I can see it in the Repository.
At which package level(1st to 4th), should I right-click and go to 'Create->More->Transformations' so that I can see this XSLT Mapping program in the repository?
I have followed all the links from help.sap.com but I am unable to get the desired result, i.e. see my Mapping in the Repository when I choose Mapping Program of type 'XSL->ABAP Engine', from the drop-down box in Interface Mapping.
Kindly help.
Regards,
Puloma.

Hi Naveen,
I did as you told, i.e. keyed in the name of the ABAP Transformation program (mapping) name.I have not written any namespace for the Mapping program in the Interface Mapping Design, just the Program name.
When I execute my mapping from se80, it works perfectly.
I created this Transformation program at the topmost level (i.e. Structure package level).
But when I execute my scenario, I get the following runtime error in sxmb_moni:
Error in mapping program zpc_transfom2 (type R3_XSLT, kernel error ID UNCAUGHT_EXCEPTION).
What is wrong? Did I create the transformation program at the wrong level?
Regards,
Puloma.

WebDynpro ABAP - ABAP Engine

If we have latest SAP R3 that works on WAS 640 can I deploy WebDynpro for ABAP and use this ABAP Engine to do all the development. That way all the regular R3 deveopment as well as Web Dynpro ABAP development will be in Development box.
Is this ok to do? Any issues. Problems please let me know.

WDA is only available in WAS 7.0 or Netweaver 2004s. So you need this release in order to have Web Dynpro ABAP.
REgards,
Rich Heilman

STRUST Import Certificate to ABAP engine.

Hi All,
I'm importing Certificate into ABAP for first time.
Can you please tell me the steps to do that.
T-code: STRUST
SSL Client Ananymos
On the right panel click on Import and then browse the certificate?
I did browsed the zip file which contains 6 certificates and now I'm getting this error
"Cannot analyze certificat" after selection in "Import"
Can you please tell me the steps to completed the import of certificates into ABAP engine. so that I can use it in SM59 HTTP destination type G.
Is there any blog for that ?
Thanks
Newi

Hi,
Go through below links these might help you.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/a6/f19a3dc0d82453e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/14/29236de1864c6e8d46e77192adaa95/content.htm

Flash Island WD ABAP Engine

Hello everybody
I've a question...
Is it possible using only ABAP ENGINE to develop with Flash Island on WD ABAP ?
Is it necessary having also the java engine?
Thanks to all.

Abap engine alone is enough to develop and embed flash applications in the flash islands.
You need abap engine and also adobe flex builder.
refer to this tutorial for step by step procedure to develop a demo application .
it doesnot require a java engine.
[http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163]
thanks
sarbjeet singh

Problem Installing ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION)

Hi
I am trying to install ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press.
It is installing upto 91% and giving the following errors:
RC code form SyCoprocessWait = -2 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -2.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
I am trying to learn ABAP and need to practise it. Could someone please help me in this matter.

Restart the install and search this forum for "MiniWAS", "Mini Was", "620 install" and you'll find half a dozen people who had the same problem.

Install - ABAP Engine - superdba password failed error

Hallo,
I have the J2EE Engine in my PC installed, and everything works fine. Now I am trying to install the ABAP Engine, and I get the error
<b>"Check of the superdba user password failed. Check logfile XCMDOUT.LOG"</b>
The error appears when I try to set the password for the superdba (Step 2 of the installation -> Define parameters)
Does anybody know, what can I do?
Thanks in advance
Jones

Hi,
did you specify a password for the superdba user (=SYSDBA user) at some point during the installation? If yes, did you maybe use any special character?
Thanks & regards,
Roland

Checking ABAP Engine

Hello,
I want to know how to find whether ABAP engine is working in SAP systems or not.
Kindly guide me.
Advace Thanks.

Thanks for ur reply,
Currently I am working as proactive team member,Just monitoring SAP systems,
One of the check is to ensure that ABAP engine is up and running properly in all systems,In that I am using just SM51 transaction,If all the servers are in active status means the engine is up.
But actually what we are checking?

Objects on Java Engine or Abap Engine. Pls sugget

Hi All,
Pls let me know:
1. Mapping Runtime, SLD, Adapters (except IDOC and HTTP sender) run on Java Engine?
2. BPE and IE are on Abap Engine?
3. CPA_cache refreshes objects of IR and ID present in
Java Engine?
4, SXI_CACHE refreshes objects of IR and ID present in
Abap Engine?
Regards

Hi Rider,
As name suggests, SXI_Cache is nothing but cache memory which resides on ABAP stack.
Your answer lies within your question.
Integration Engine( ABAP stack) uses the data from both IR(JAVA and ID(JAVA).
It cannot go everytime to database to collect the deatils of interfaces, mapping etc.
So, when objects got activated, they are put in SXI__cache automatically.( BOth IE and SXI_Cache resides on abap stack. communication is faster and performance increases)
But due to some technical problems, if it doesn't get reflected in SXI_cache, they have given option to manually refresh the cache.
And how data goes from ID ond IR to SXI_Cahe is again through Jco Connector.
Hope this helps.
Regards,
Piyush
Please Reward points if useful:)

Posting a message directly to abap engine

Hi all,
I'm developing an adapter and I wish to post directly my message to an abap engine via http, not passing through the http adapter; does anyone know how to make it? Which is the receiver service's parameters? and how to communicate using the abap proxy engine(of course via java, not via XI service)
thanx
Paolo

hi,
I belive you can copy a service from SICF
and put your class in the handler list
you can try copying adapter_plain
and the default CL_HTTP_PLAIN_INBOUND
handler and replace it with your code
but I've never done it yet so I don't know
if this is a suitable way
more:
http://help.sap.com/saphelp_nw04/helpdata/en/c6/839c4eea6f374b8e230ef4b152b110/content.htm
Regards,
michal

What is tthe role of ABAP Engine in EP server

Hi to All,
do any one of u let me know the role of ABAP engine in EP server! How can i make use of ABAP Engine. I know to work with J2EE Engine, but generally what we will do in ABAP Engine.
It looks to u all as a silly question, but i am not clear of this function, so i need a detail explanation of this.
Regards,
Sireesha.

Hi,
before there was a WAS 6.20 (Web Application Server) SAP's R/3 Applications were build up on the so called R/3 Basis System. One part of the R/3 Basis was the APAP/4 Runtime. This was true until R/3 version 4.5.
In parallel SAP started to develop a J2EE Application Server. They founded/buyed a company in Bulgaria called InQMy. You might know that the portal version EP5.0 was based on the InQMy J2EE engine.
Since R/3 4.7 the old R/3 Basis is called "Web Application Server" (WAS 6.20). Additional to the ABAP/4 Runtime this WAS contains the former ITS (Internet Transaction Server" and the BSP's (Business Server Pages). The old ABAP/4 Runtime is now called "ABAP Stack".
The old InQMy J2EE Server is now called "J2EE Engine" or "JAVA Stack".
With Release 6.40 of the WAS it contains both the ABAP Stack and the JAVA Stack.
Now to Your Question. A standarad EP installation just contains the JAVA stack of the WAS. The ABAP stack normally is not installed, because it is not used by the EP. You could install the ABAP stack in addition. But for what purposes ? Well if You would like to develop a webapplication based on BSP.
If You are allread running an R/3 System it contains an ABAP Stack but normally no JAVA stack.
The Java Stack of the EP Server can call the ABAP Stack of an R/3 System via RFC (remote function call).
More confused now ?

EP 7 : Integration with ADS & ABAP engine

Dear All,
I am installing EP 7 with ABAP engine. In this case, the J2EE engine will be installed as an add-in.
In this case, the UME configuration of EP will use the SAP ABAP engine as datasource.
Now, will I be able to integrate my EP , UME with the ADS ? Is there anything which I need to take care while installation ?
Expect your help asap.
Regards,

Hi Shreya,
Following link give you info about UME configuration with the different types of Datasourse. Read this,
http://help.sap.com/saphelp_nw04/helpdata/en/e5/618a3eacd49076e10000000a114084/frameset.htm
Also read to use LDAP as datasourse,
http://help.sap.com/saphelp_nw04/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
Hope this help!
Juan
Please reward points if helpful

Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?

Hi,
Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
Thanks

Hi
Yes you can install java engine.Run sapinst from installation master cd and select only java engine installation.There will be check boxes abd you have to choose java engine.Also check the nwo4s installation guide.It will guide you throughly.Keep in mind to use correct jdk required for your kind of installatiom.
Reward points if useful

Sneak Preview of WAS 640 and ABAP Engine

Hi all,
I installed the Sneak Preview of the WAS 6.40 on a WinXP system an tried out most of the examples and tutorials.
It is working fine and the developer studio is also very nice.
I am wondering whether the abap engine is also available in the sneak preview or is it restricted to the java side only?
Best Regards,
Steffen

Hi Steffen,
all you need for this type of communication is already included in the WAS. There's a lot of documentation available:
JCO (Java Connector for ABAP backends): http://help.sap.com/saphelp_nw04/helpdata/en/35/42e13d82fcfb34e10000000a114084/frameset.htm
Generating proxies "around" JCO (very useful feature of the developer studio):
http://help.sap.com/saphelp_nw04/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm
Using ABAP EIS in a transactional J2EE environment via J2EE connector architecture: http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5caa85b11d6b28500508b5d5211/frameset.htm
This should be sufficient for the beginning
Hope that helps.
Best regards
Stefan

Using BC-XMW in mini ABAP engine 6.20

Similar Messages

Maybe you are looking for