Using BEx 7 Query in BEx 3.x Web Template

Hi Experts,
I was wondering whether it is possible to use 7 Queries in 3.x Web Templates?! I would like to run the Templates without any EP installation but with the features of BEx 7 Query Designer.
Is this possible?
Thanks & Cheers
Tobias

Hi,
thanks for your reply! Which plugin?
BR
Tobias

Similar Messages

Passing a variable value from one query to another within a web template

Hi All,
I have a web template with two queries. Both queries have the same select option variable called ZSELCUST on the characteristic ZCUSTOMER but because they are different info providors (both infocubes) the customer has to be entered once for each query, even with the 'Display same variable only once' flag checked.
I want the user to select the customer once and then that value be passed to the other query within the resulting web template output.
Am I right in that the same variable is used more than oncee because of the different info providors?
I'm struggling, can anyone help out there....???
Best Regards,
Stuart Humphrey

Hi
A way of doing this is by "linking" the queries: in transaction RSBBS you define the sender and receiver queries. In query navigation you can jump to the dependent query (blue arrow icon in the BEx tool bar). This transfers the navigational state to the called query: filters over characteristics and variable values.
Hope this help
German

Variables defined in Query designer not affecting the web template

Hello,
I have some variables defined in a query, through Bex query designer.
The selection screen to enter the values for the variables pops up when excuted on the web or in excel .
But the variable selection screen does not pop up when i execute a web template where in i defined with the same query.
Please suggest me why it is happening so..

In WAD check in the General Properties whether you have unchecked the Force Variable Screen On Checkbox
Other thing to check is whether you have personalized the selection screen??? After Executing the Report go to selection screen by clicking on the Variable Screen option. To the left side of each variable you can see the personalization icon. right click on that and select delete personalization.
Hope this helps.

Disable link of BEX 3.5 query web template

Dear All,
we migrated all BEX queries from 3.5 to 7.x. Since our users use the BEX queries via web template, most of then have the web template links of old 3.5 queries saved as bookmarks in their browser.
Is there a way to disable this link server side, in order to force the user to update theyr link with the new one of BEX 7.x query web template?
Thanks

Hi,
> You may delete all 3.X bookmarks. The standard 3.X bookmark administration can be found in transaction RUNSCHED.
All below options mean, that you also cannot use the Broadcaster anymore !
> You may deactivate service /sap/bw/BEx in SICF. Users will get an ICF error message (Service not found).
> You may create your own handler on ICF service sap/bw/BEx, providing an appropriate message for users.
> Your can create your own redirect/logon/error page on this service.
> Another very drastic option would be to switch off service HTTP(S) in your ICM. In this case, no web applications are available via that service on the system anymore.
regards,
Martin

Query related to BEx query and web template migration

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

How to use a query in Web template

Hello i have really a very silly question.
How can i use a Query that is already defined by BEX into a Web template so that i can set up simple properties like changing colours of Row as well as avoid Tab pages.
I logged into a Web template.
Can any provide step by steps.
Please help

No questions is silly, doubt is always a doubt and clarifying the same is the best way to deal with that.
Anyway philosophy apart and coming to business.
1) created the query in Query designer, say Zquery1
2) logon to WAD.
3) for assigning Zquery1 to WAD template, you haev to decide how you are going to use Zquery1 in WAD.
4) for ex: you want to display the query result and also a graph based on that result.
5) So we have to drag drop Chart and table in WAD.
6) create dataprovider and assign zquery1 to this dataprovider.
7) save and execute.
For chanding the colors, under properties, we will have many stylesheets delivered by SAP. Yiou can choose anyone on this which suits to your requirement. If not, then edit the stylesheet and code it as per your need.
Hope this helps. If yes, please assgin points.
Regards
Pankaj

How to use BEX query in BI data archiving?

I see some power point presentations about the use of BEX query in the archiving customizing setting.
But the presentations have no text about the details.
Can somebody help detail how to use BEX to customize archiving objects?
Thanks!

Yeah I would be interested in such a solution as well.
Can anyone help here?
Cheers,
Andreas

Can we use Result from another query in Webi using Bex uery universe?

Hi,
Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
Has anyone run into the same issue and if this is possible and what should be the solution?
Thanks in advance!
Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

In that situation:
Create two queries : Oracle and BW query.
@ Report:
As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
Hope it helps you.
Thank You!!

Advantages of using Bex WAD over Bex Query Designer?

Can anyone tell me the advantages of using Bex WAD over Bex Query Designer?

Hi Shiva,
WAD has many advantages when compared with Query Designer. few of those are
You can include Radio Buttons, Push Buttons, Check Boxs.....
You can include more than one report in one WAD Report
Completely u can make fancy as much as requried ....
Many graphs and chars are can be included .....
data from Views can be viewed
Many..many....

Query output using BEX and web analyzer

Hi all,
I have an issue while designing a query in query designer.......I have a sales cube in which sales for every month is reflecting .....Now i have to design a query to show month wise sales....
But for some months if there is no sale record in the sales cube for that particular month like Feb 2006, when i execute the query on this month using BEX or web analyzer , it simply says "No data Found"..............
I want to show 0(zero) in sales quantity instead of this message.....Please guide me that how can i replace this message with zero value.
regards
Hina

Dear Hina Zakir,
<b>This is the BI 7 Query designer solution...........</b>
if u want to disply even if the value is Zero then goto the query properties not the single key figures go to the entire quer property and then click the Row/columns in that Suppres Zeros in that select Do Not Suppress + Effect on Tab is there in the Select Row or column or both ................then u can ablet to c the values as Zeros..
Regards
venu

Created Webi report using BEx Query.

Hi All,
I am going to upgrade in BW and using BEx & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
Can anyone tell me how to test data?
Regards,

Hi,
compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
Thanks,
Amit

How set current month in Voyager using BEX Query 7.0

Hi:
I have a voyager workspace connected a SAP BI Query 7.0. My query shows information since 2007 to 2009
How I can set current month in characteristics defined in slice section? I tried to use a exit variable in proposed values query section but it doesn't works, when I use filter section in my BEX query it show only information for 1 month.
Thanks
Marta Díaz

Hi,
From the problem report i understand that you want to open the Voyager workspace with all the data, but want to analyze for only the current month.
You can achieve it in the following manner.
a) Open the Voyager report.
b) Click on the member selector of the slice.
c) Deselect the default member and then select the current month.
d) Click on OK button.
This should show you the data for only the current month.
If you want to make use of exit variable by using the SAP query designer then try using the current calendars month variable.
You can also refer from the discussion below in the thread to create a variable.
Dafault value previous month in BEx
Hope this helps.
Thanks

How to build and publish a webservice using Bex query?

Hi Experts,
Can anyone tell me how can i step by step to build and publish a webservice using Bex query,
so another application can call this webservice.
thanks.

There i already a web service called query_view_data for the same available as delivered by SAP...

Broadcasting to Enterprise Portal using Bex Broadcaster from Query Designer

I have already been able to broadcast from Query Designer using BEx Broadcaster to the portal based on a role or a user.
I select "Export into Enterprise Portal" as the Distribution Type.
I then select "Export Document to Personal Portfolio" and then enter a role.
Then I check "User-specific" because I want it to be user specific.
This all works fine.
Now I get to my question.
Can I go one step further and broadcast to a folder call... lets say "Sales" inside of their Personal Portfolio?

Hi Eric,
I have the same problem. Were you able to resolve it?

4.x: Document Link passing range parameter to a WebI rpt using BEx query

I'm new to working with BEx queries, so I may use the wrong terminology. I'm trying to create a document hyperlink from one WebI report to another. Both are based on BEx queries, which I didn't create, nor do I have access to modify. The BEx query for the target report has a parameter, Fiscal year/period, which is a range parameter. The displayed value in a report or in pick lists is in the format "JUL 2010". The key is in the format "K4/007/2010".
I have tried using the Document Link expert to configure passing the range parameter, but have been unsuccessful. The typical result is an error message, ERR_WIS_30270, which is most likely the result of an incorrect format for passing the range. I've not been able to locate adequate documentation that describes the syntax for passing a range value to a BEx parameter. I've successfully created Document Links to reports using BEx queries that have a parameter that requires a single value, and I've done Document links in non-Bex reports in 3.1 without issues.
Has anyone successfully passed a range value to a BEx paramter? If so, what syntax did you use?
The environment is BI 4.0, sp 2 (14.0.2.439)
Edited by: Steve Green on Oct 7, 2011 8:04 PM

Marianne,
Thanks for the heads up on the fixpack. I tried looking at the note # you sent, but a search of SAP Notes says that the note has not been released. However, reviewing the Fixed Issues in fixpack 6 shows the following item:
ADAPT01580012
Link to a WebIntelligence report using syntax OpenDocument fails when target document contains a prompt
based on a BEx variable of type Interval. Error message is "An internal error occurred while calling
'answerPromptEx' API. (Error: ERR_WIS_30270)".
Behavior is now correct and refresh operation takes into account interval answer passed in OpenDocument URL.
Now we just need to upgrade to fp 2.6 to see if it resolves this issue. I've also opened a ticket with support, so I'll see what they say.
Edited by: Steve Green on Oct 12, 2011 7:27 PM

Using BEx 7 Query in BEx 3.x Web Template

Similar Messages

Maybe you are looking for