Using blade cuts the audio why??

Hi all
I'm using blade to trim some video and the moment that I select the part that I want deleted it deletes my audio at the same time
and my audio is separate from the video (using the audio from another video that I have taken out and replaced the video with newer
footage) What am I doing wrong here?? The audio shouldn't be attached to anything because I have detached it so I just used the trim
tool and shrunk it but like I said I was able to delete the selected video part but when I delete it, it deletes the audio. Any way to fix this?
I'm using FCP 10.0.9 since I don't have Mav (10.9) installed.
Thanks
Serge

in addendum to Tom's reply:
those audio 'connectors' don't necessarily have to be done with the clip straight 'above' them.
watch this tutorial:
http://youtu.be/Cm7mfrFd8QQ
... although I don't get it exactly, why an audio-clip should NOT be connected to the video-clip you're actually watching while listening to that specific audio-clip

Similar Messages

How can i cut the audio from 1 file and put it on another?

I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
btw i have quicktime pro is that changes anything

Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

HT200131 When I connect my MacBook Air to my TV using Apple TV, the audio stays on my MacBook and does not transfer to my TV. Thus the volume is very low when I am watching a Movie on my TV and I have to listen to the volume from my laptop. How can I fix

When I connect my MacBook to my television using Apple TV the audio stays on the MacBook and doesn't transfer to the TV. How can I make it so I can hear the Movie or Video through my TV's speakers and not my MacBook's?

This is called "extended desktop mode". It's an extension of the desktop off to the right (by default) of your MBair screen. Grab an app and drag it off the right side of your MBair screen and it will appear on the TV.
To mirror your MBair screen on the TV you can press Command F1. This will toogle between mirror and extended desktop.
You can find all the settings in System Preferences > Displays > Arrangement tab.
Regards,
Captfred

Why everytime i used my skype the audio on other line doesnt hear me well? it has some noise disturb

Hi why everytime i used my skype or yahoo messenger and used my video call the receptions or the audio on other side coudnt hear me well there is some distortion or noise on the background and my voice is not clear? Can you help me pls regarding this problem. thank you ver much
my laptop brand is Hp Pavillion dv3 notebook Pc
windows 7 professional 64 bit

In general when syncing the device won't give the desired results the following steps should work.
Backup the device.
Restore as a new device.
Restore the backup made earlier.
tt2

Whatever I export , the final video is always choppy, especially the audio, Why is this? thanks!

I have Macbook pro 15, 2011 , Core i7 ...
When I edit everything seems fine, but when I export the video is choppy and the audio is a mess.. . I don't know why.. I tried exporting in many formats, but same problem

Hi , thanks for your help
The thing is ...whatever I edit ..whenever I export I always get 'choppy' audio . For example I have a video I exported from Adobe Premier... it plays well.... it's audio is 44.1 Kz ... I import it in a project in Final Cut which is also 44.1 and export using same settings and still I have the same problem. I have tried doing it in 48Kz as you said but still... everything I do on Final Cut plays well in the programme but when exported the audio is a mess..
I'm sure it's somehting I'm doing ..I'm not really familar with this ..It's my first Mac and my first FinalCut experience

Upon using USB Headsets the audio gets distorted

Hi
I have used USB headset in other laptops including HP but have never faced this problem. But I get this problem with the new notebook, and after a few minutes of use the audio quality automatically gets distorted and loud.
This is not a problem with the USB headsets since I have been using them since long without any problem, and they dont give me any distortion with other notebooks even today.
Please advise.

The headset has an independent C-Media audio chip that accepts USB on one side and has it's own AC97/DAC. Because are 2 devices (one USB controller and one AC97 sound chip) apears in 2 places in Windows devices! For more info look here:
http://www.cmedia.com.tw/?q=en/usb_audio
CM06-F+/ L+ is a highly integrated single chip USB audio solution. All essential analog modules are embedded in CM06F+/L+, including 8CH DAC and earphone buffer, 2CH ADC, microphone booster, PLL, regulator, and USB transcei'ver.
I would correct the affirmation made by somebody that USB audio devices are no soundcards - YES there are soundcards with an USB controller instead of the usual PCI one! The digital data flows on USB instead of PCI to the audio controller that send it to the integrated DAC's and to the headsets.
So trying to use the USB headset via the X-Fi is like you are trying to use the on-board soundcard via the X-Fi...
Message Edited by SoNic2367 on 06-25-2006 2:2 PM

No audio on some App like tennistv the have live stream video, I used to hear the audio, they told me is an iPad issue, also trayed RolandGarros App no audio

I have several Tennis App like TENNISTV, US OPEN, ROLANDGARROS and last month I noticed that I have no sound on the video (this is live streaming) games if I do log in on my PC there is video and audio playing, I did contact them, the 1st suggestion was to delete the app and reinstalled, I did not worked still no sound at all, they told me to contact Apple

Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Coverted old vhs tapes and downloaded to computer using Roxio. The audio and video don't sync.

I converted some vhs tapes to imovie with Roxie. Every project I created has video and audio that don't sync. What am I missing?

Thanks all-
This question was answered in [another thread|http://discussions.apple.com/thread.jspa?threadID=1966084&tstart=0].

Why is the audio of MSNBC, YouTube and other site videos very low when using Firefox?

For several weeks now, when I view videos from msnbc.msn.com, youtube.com and other videos from other sites, the audio is so low....I can hardly hear it. But when I view the same videos using Google Chrome, the audio is very good.
== URL of affected sites ==
http://www.youtube.com

Did you check the volume setting in the Flash player?
Do those Flash players have a volume button that opens a slider?
Clear the Flash cookies and settings.
Flash Local Storage - http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html
The Flash object on that page shows the local storage on your computer.
You can also delete the macromedia.com and #SharedObjects folders to reset all Flash cookies and settings.
XP: C:\Documents and Settings\<user>\Application Data\Macromedia\Flash Player\
Vista: C:\Users\<user>\AppData\Roaming\Macromedia\Flash Player\
(AppData is a hidden folder: http://kb.mozillazine.org/Show_hidden_files_and_folders )

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

Cutting audio if respondant clicks answer before the audio clip has played in full..

Trial Captivate vrs 5.
I set up a slide displaying someone using a scanner. An audio question runs 'When scanning the carton what must other checks must the storeman make?' with a multiple answer facility.
If the respondant jumps the gun and submits an answer and clicks 'anywhere' to continue, the following slide's audio begins and the two tracks run simultaneously. Is there a way to either cut the audio before moving onto to the next slide or , preventing the next slide from triggering until the audio sequence is complete and the answer selected. I am new here so there could be some very basic rules that I am not following.

I never use audio on question slides. I find text-based questions work better because people can read faster than they can listen. Thus you avoid the issues you're now having.
If you must have audio for the question, offer it as an optional thing that the user can get by mousing over another rollover object. That way, they'd have to keep their mouse on that object to listen to the entire audio question. As soon as they move their mouse off the object to answer the question the audio will cease, then when the feedback callout appears, they'll hear that audio. This makes it very unlikely you would have two audio tracks playing at the same time.

Sent an video via text but can only hear audio. why can't see the video?

i was sent a video through text but cannot see it. i can only hear the audio. why?

maybe it was sent in a format that cannot be read by the iPhone.

The audio file is not recognized by Logic. Can't import audio files?

Hi,
The audio files are on my desktop. Logic 9.1.1 will not recognize them and gives me this message when I try to drag and drop OR Import Audio File OR use Audio Bin.
As far as I know, I am using wave files (extension .wav). So what could be the problem. Here's a picture of how the files look on my desktop.
The regular silver and blue iTunes icons look like this when I Get Info:
The black iTunes icons look like this when I Get Info:
Importantly, the black iTunes (only 2 out of the 18 audio files) are the ones that actually import. Does it have something to do with the fact that it shows under "More Info > Audio Channels 1" vs. the silver and blue iTunes .wav files (which do NOT have this)?
Furthermore, here is the process I used to get the audio files in the first place. On my PC, I exported audio files from my Ableton Live project onto a thumbdrive. I copied the audio files from my thumbdrive to my Mac. Maybe this had something to do with it.
Also, as you can see, under Sharing and Permissions > there is only "read and write" for all names, so it's not a permissions thing.
Thanks.

Thanks for your reply.
+Can you play them as Preview (select in Finder, hit spacebar)?+ No. The black iTunes icons play with no sound and the silver and blue iTunes icons do not even come up in Preview at all.
+Will iTunes play them?+ Only the black iTunes files (2 out of the 18). When I click on a silver and blue icon'd file, it will not even open in iTunes.
why on the desktop? it was just a temporary thing. I was not able to pull them into my Audio Bin. I tried what you suggested. I put the files in the Audio Files folder of my project. When I go to open them from within Logic by Import Audio File, they are visible but greyed out. I don't use the desktop except for testing stuff like you do.
+How was the thumb drive formatted? FAT32 or other DOS-format, or Mac OS Extended (HFS)?
+the extension is not where apps look to recognize an audio file format, it is the header data. Some audio programs can read RAW audio files, but more about that after your reply to this one.+ It is formatted MS-DOS (FAT 32).
(*I wrote all this stuff above while I was working and waiting for the PC to write to my thumbdrive again*******finally I got everything to show up.
I loaded the files again from the thumbdrive. This time they were all in the black iTunes format, and I put them directly in the Audio Files folder like you suggested. After some doing everything works fine. Weird.
Thanks!

Can one use Final Cut Express to create a multi-track CD?

I like the editor in FCE, and have used it to break up an audio recording of a concert into all the tracks, with chapter markers. Now is there a utility that will make this into a CD?
The slow way is to export each chunk as an audio file, and then import them all into iTunes and burn a CD from that.
There must be a quick way!
Maybe I'm asking in a slightly odd place, so recommendations of somewhere else to ask (shame there's no iCD !) also appreciated.

There's no direct path from FCE to an Audio CD that I'm aware of. If the audio consists of individual clips in the Finder, you could just use them in iTunes or Toast to create the Audio CD. Either app will convert the 48khz audio to 44.1khz for the CD.
Otherwise you'll have to cut the audio into the individual tracks as needed.
-DH

What happened to the audio switch on Apple Aps?

Now I am indefinitely switched to Bluetooth when wanting to listen on the ITunes Ap and Podcast Ap. The YouTube Ap still has the a symbol you can use to switch the audio preference on connected to your device. Am I missing the new way to shake the phone to get the audio to switch or what?

Using the button on the lock screen to switch audio sources works fine. The button is a rectangle which is a different shape than other buttons so I don't recognize it easily. OldGnome here is an idea for you. A gnome game. A yard gnome gets swept away in a hurricane, tornado, bald eagle. (Depending on where you live.) The yard gnome lands in an abondanded home's yard. The yard is a mess so the yard gnome starts taking care of the garden. The game would be a way to educate people on invasive plant species, native plants, and the gardening techniques.

Using blade cuts the audio why??

Similar Messages

Maybe you are looking for