Using both CS6 and CC version ?

Hi,
Can I use both CS6 and CC version or need to uninstall CS6 first ?
Any trouble ahead with new CC versions ?
Thanx,
Seb

Can I use both CS6 and CC version
Yes.
Any trouble ahead with new CC versions ?
That's like asking whether there will be snow on next Christmas. nobody can answer that until the new versions are actualyl available.
Mylenium

Similar Messages

  • Loaded both CS6 and CS6 (64-bit) extended version...

    I just loaded both CS6 and CS6 (64-bit) from disk (no download) onto my Windows 8 HP Envy computer.   I noticed both boxes were automatically checked by Adobe during the set-up.  I left as-is to not cause problems thinking just one would load.   Both programs take 3.3 GB but that's not a problem for me.   I was surprised to see that I had a choice of TWO PS programs now on my computer.   I searched all over Adobe and can't find a similar problem.
    Also, two versions of Bridge loaded; the regular and the 64-bit. 
    My question is this (applies to both CS6 and Bridge):   Do I need to remove one?   Why did both load?   If I should leave both, which one should I use?   Why does this happen?
    My computer specs:
    Windows 8
    Memory:     10GB  DDR3
    System:     64 bit
    Hard Drive:     1.5TB
    Processor:     AMD Six-Core FX-6200
    Thanks so much...Kathy

    you should probably leave the 32 bit program. 
    there are certain plugins, printers, scanners and i-don't-know-what-else that won't work with the 64 bit program and will work with the 32bit program.  unless you're certain you won't care about that, leave the 32 bit alone.

  • I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and jus

    I am using PS cs6 and lightroom and I am having a hard time know what color space to choose.  The lab that I am using told me that their color space is sRGB.  Do I need to have both PS and Lightroom set at sRGB or should I have PS set at adobe RGB and just set my export from lightroom as sRGB?

    Please post in the Photoshop forum.
    http://forums.adobe.com/community/photoshop
    Bob

  • I have just purchased the new Canon 7D II.  I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered.  I have updated both CS6 and LR so that is not the problem.

    I have just purchased the new Canon 7D II.  I am using CS6 and Lightroom 5.0, neither of which can open the RAW files although I see from the list of supported cameras that the 7D II is covered.  I have updated both CS6 and LR so that is not the problem.  Not sure what to do next.

    It has been indicated that both of those cameras will be supported in the final release of Camera Raw 8.7. But there is no announced release date. There never is. I assume it will be before December 31. But that is only my guess based on the fact that the release candidate expires then.

  • I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?

    I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!

    jedimaster Master wrote:
    how do I do both?
    By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier

  • Photoshop CS6 and CC versions - which is better ?

    I use Photoshop CS6 for all my work but some of the features of the CC version are missing (such as the new Perspective warp).  If I install CC can I still use my CS6 files and do these products run parallel or integrated ?  i.e. will I have 2 photoshop programs stored on my hard-drive or one with all of the features of both ?  Thanks for helping  DA

    Think of CC as CS7. It isthe next full upgrade. They just decided to rename it CC as it intragrates into the cloud features like syncing presets for example.
    Therefore all CS6 files will work in CC. You can keep both on your system if you like, why not I do. In fact I have CS5, CS6 and CC at the moment.
    If you choose to, you can uninstall CS6 and keep just CC. Just keep in mind what you save will be for CC and can be loaded into CS6 if you have maximum compatability turned on, otherwise it may not work. (Never tried it)
    If you purchased any plugins or filters, you may need to reinstall them for CC to use them. People have run into issues copy/pasting the files between versions.
    To use any of the new features of photoshop, you need to install CC. CS6 will only get bug corrections. The exception to this is camera raw, the latest version is designed for both CS6 and CC.

  • Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened an

    Using Photoshop CS6 and after printing approx. 10 cards on an Epson R3000 printer the program gives me a dialog box saying "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  Even after closing and reopening the program, the print command is greyed out so I cannot select any printer. This also happens with a Brother laser printer. Both printers will produce a test page out side of the Adobe product. Help!

    I cannot get any help either.  I get the message "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."  I have reinstalled all drivers, powered off/on all printers (2 of them - a Brother HL - 4040cn and an Epson Stylus Pro 7890 - which all worked fine until this morning).  There appears to be no path to a solution.  I have read all the forums and tried about 20 different suggestions all to no avail.  Reboots, changing cables, reinstalling printers and drivers and Photoshop CS6 - ALL TO NO AVAIL.  On a macbook pro retina with 10.10.3.  This issue is out there and some get solutions - but not all - that's my crowd...the not all crowd.  I have yet to be able to print from CS6 any more.  This is a show stopper and my patience is wearing thin.  And I'm tired of stupid questions like "is your printer powered on?" give me a break.  This appears to be an adobe photoshop cs6 problem - as I can print from every other application.  Anyone have any ideas?  Adobe should have something?... Adobe system  info below:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Mac OS 10.10.3
    System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2300 MHz
    Built-in memory: 8192 MB
    Free memory: 4665 MB
    Memory available to Photoshop: 7059 MB
    Memory used by Photoshop: 70 %
    Image tile size: 1024K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version:
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 2
    Display Depth:= 32
    Display Bounds:=  top: 1072, left: 140, bottom: 1950, right: 1580
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    OpenGL Version: 2.1 NVIDIA-10.2.7 310.41.25f01
    OpenCL Version: 1.2 (Feb 27 2015 01:29:10)
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: NVIDIA GeForce GT 650M OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1050, right: 1680
    Video Renderer ID: 16918311
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 16384
    Serial number: 92629107631240972642
    Application folder: KerrysHD:Applications:Adobe Photoshop CS6:
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      KerrysHD, 232.6G, 19.7G free
    Required Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
    Primary Plug-ins folder: KerrysHD:Applications:Adobe Photoshop CS6:Plug-ins:
    Additional Plug-ins folder: not set
    Installed components:
       adbeape.framework   adbeape   3.3.8.19346   66.1025012
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.2.29.18602   66.490082
       adobe_caps.framework   adobe_caps   6.0.29.0   1.276181
       AdobeACE.framework   AdobeACE   2.19.18.19243   66.492997
       AdobeAGM.framework   AdobeAGM   4.26.17.19243   66.492997
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.02.19243   66.492997
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   66.492997
       AdobeCoolType.framework   AdobeCoolType   5.10.31.19243   66.492997
       AdobeCrashReporter.framework.framework   AdobeCrashReporter   6.0.20120201  
       AdobeExtendScript.framework   AdobeExtendScript   4.2.12.18602   66.490082
       AdobeJP2K.framework   AdobeJP2K   2.0.0.18562   66.236923
       AdobeLinguistic.framework      17206  
       AdobeMPS.framework   AdobeMPS   5.8.0.19463   66.495174
       AdobeOwl.framework   AdobeOwl   4.0.93   66.496052
       AdobePDFL.framework   AdobePDFL   10.0.1.18562   66.419471
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   6.0.0.1654  
       AdobeScCore.framework   AdobeScCore   4.2.12.18602   66.490082
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   66.145661   66.145661
       AdobeXMPFiles.framework   AdobeXMPFiles   66.145661   66.145661
       AdobeXMPScript.framework   AdobeXMPScript   66.145661   66.145661
       ahclient.framework   ahclient   1.7.0.56  
       aif_core.framework   AdobeAIF   3.0.00   62.490293
       aif_ocl.framework   AdobeAIF   3.0.00   62.490293
       aif_ogl.framework   AdobeAIF   3.0.00   62.490293
       AlignmentLib.framework   xcode   1.0.0.1  
       amtlib.framework   amtlib   6.0.0.75  
       boost_date_time.framework   boost_date_time   6.0.0.0  
       boost_signals.framework   boost_signals   6.0.0.0  
       boost_system.framework   boost_system   6.0.0.0  
       boost_threads.framework   boost_threads   6.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.0.5.19287   145486
       data_flow.framework   AdobeAIF   3.0.00   62.490293
       dvaaudiodevice.framework   dvaaudiodevice   6.0.0.0  
       dvacore.framework   dvacore   6.0.0.0  
       dvamarshal.framework   dvamarshal   6.0.0.0  
       dvamediatypes.framework   dvamediatypes   6.0.0.0  
       dvaplayer.framework   dvaplayer   6.0.0.0  
       dvatransport.framework   dvatransport   6.0.0.0  
       dvaunittesting.framework   dvaunittesting   6.0.0.0  
       dynamiclink.framework   dynamiclink   6.0.0.0  
       FileInfo.framework   FileInfo   66.145433   66.145433
       filter_graph.framework   AdobeAIF   3.0.00   62.490293
       hydra_filters.framework   AdobeAIF   3.0.00   62.490293
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       image_compiler.framework   AdobeAIF   3.0.00   62.490293
       image_flow.framework   AdobeAIF   3.0.00   62.490293
       image_runtime.framework   AdobeAIF   3.0.00   62.490293
       LogSession.framework   LogSession   2.1.2.1652  
       mediacoreif.framework   mediacoreif   6.0.0.0  
       PlugPlug.framework   PlugPlug   3.0.0.383  
       UpdaterNotifications.framework   UpdaterNotifications   6.0.0.24   "6.0.0.24"
       wrservices.framework        
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

  • My PC crashed with both CS6 and Lightroom 4. .

    My PC crashed with both CS6 and Lightroom 4. . .I purchased a Mac Pro.  Can I download the Mac versions of both programs and use my currenct serial numbers?

    You can with Lightroom, but not (as far as I know) with Photoshop. You ought to get in touch with Adobe's customer service people and see if you can "sidegrade" to Mac for a relatively small fee.
    Hal

  • I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

    I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

    Which version of iTunes are you using?
    What is your iPod firmware number as shown in the iTunes summary page?
    Is there any error message when you try to sync the vidoes?
    Have a nice day!

  • HP Laserjet Pro 400 Printer unable to print docs using both letter and legal paper

    HELP!!  Have been using an HP Laserjet Pro 400 M425dn dual tray printer for 2 years, along with a Dell laptop.  Always had ability to send documents to print using both letter and legal size paper.  Under print set-up on laptop, the option checked was always set to "Choose Paper Source by PDF Paper Size".  Now I've just purchased an HP Envy All-in-One Desktop, which does not offer that option under Print Set-Up.  While it allows for 'Auto Selection' of paper size, you are required to choose either letter or legal size paper.  I've called tech support 3 times, the latest call earlier this am, only to be disconnected.  Yesterday I was told that I should go on hp/support and update drivers.  My husband downloaded drivers, but still no fix.  Unless this issue is resolved asap, I will have no option but to return this Envy Desktop, as I cannot run my business without this option.
    Anyone have a similar problem?  How was it resolved?

    The available options will (probably) be determined by the printer driver in use.
    This , in turn, will be determined partly by which Operating System and version you are using.
    Once a printer model has been out in the field for some time (generally when the next generation (or two?) of devices has been announced to supersede it) that model becomes a 'legacy' device, and 'full-specification' printer drivers may no longer be supplied by the printer manufacturer, but basic (i.e. without too many options) drivers will (probably) instead be supplied with the operating system.

  • Linking Access tables, creating a query with using both Access and Oracle

    Hello,
    I am using 3.0.04.34 version Oracle Developer. I am supposed to create a script/procedure to use both Access tables and oracle tables together. There is an option in developer to copy the access tables into oracle. But it doesn't help me. Because when we updated the access tables
    the copied ones are not be updated. How can I created a linked access tables to oracle and create a query with using both access and oracle table together.
    I will appreciate if you guys help me. I look forward to hearing from you guys.
    Thanks,
    Pinar

    Pinar,
    to be able to query MS Access tables in Oracle you need an additional product, the Oracle Database Gateway for ODBC. It allows you to link any foreign database into an Oracle database using a suitable ODBC driver. You can then access the MS Access tables through a database link based on the Database Gateway for ODBC. This will also allow you to join local Oracle and remote MS Access tables from your Oracle database.
    There's a note on My Oracle Support which gives you more details:Document 233876.1 Options for Connecting to Foreign Data Stores and Non-Oracle Databases - For example - DB2, SQL*Server, Sybase, Informix, Teradata, MySQL
    And there's also a dedicated Forum: Heterogeneous Connectivity

  • Have BOTH .m4a and .m4p versions of same purchased songs after re-import

    Hello,
    I recently had to reconstruct my iTunes library (new machine, new installation) and so I did an "Add to Library" of my library folder into an empty iTunes library. After import, I've discovered that for about 215 songs which I've purchased from the iTunes Store, I have both .m4a and .m4p versions of each of these songs. If I view the "Kind" of each song within iTunes, the .m4a shows a "Kind" of "Purchased AAC Audio File", and the .m4p version shows a "Kind" of "Protected AAC Audio File". If I show the Bitrate, each copy of each song is the same, 256 Kbps. If I view each song file in the Finder, the .m4a is about double the size of the .m4p. I have a few questions surrounding this:
    1. Why are the sizes of the song files so drastically different?
    2. Some time ago I took advantage of that DRM-free promotion, so I am suspecting that this may have had something to do with me having both protected and non-protected copies of these files. However, I am curious why both files now show in my library, whereas before, they did not -- only one copy showed. Does anyone know why both song copies are now showing?
    3. Should I keep both of these files?
    4. Is there a way to manage these files in iTunes so that only one copy shows? They both show when duplicates are hidden, because they are different, or iTunes doesn't know of the association I suppose. But of course that messes up trying to play an album -- every song plays twice.
    Thanks in advance for your answers.
    Brad

    No--nothing gets deleted when you convert. You get two copies of the song in your library. (On Edit: I haven't done this with the latest version of iTunes. I assume nothing gets deleted just like before. To check--maybe you should convert ONE song and see if you get a duplicate in a smaller version, or just a smaller version! I've always gotten duplicates!)
    I did leave out a few steps on how I do this--but if you're interested here's how I do it. Make the playlist. Then go to Edit>Select All. Then I go back to the top line: Advanced>Convert Selection to AAC. (To be able to do this you have to have your import option set to AAC 128 kps under the advanced tab in your Preferences settings. After you do the conversion make sure you set this tab back to your preferred lossless import option!)
    You will get two copies of the songs in your library. Your original playlist will contain the lossless songs, so you'll have to pull the AAC songs back out into a play list. You can find them easily by sorting your library by "Kind" and then pulling the AAC files into a playlist. You can label this iPhone--or whatever.
    After you load the playlist onto your iPhone, uncheck it so the songs are not duplicated in your library. If you ever want to delete them, you have to do this inside your library or the file will remain on your computer. (It does take a while to run the conversion--so I rarely delete things afterwards if I think I'm going to use the file again.)
    Post back if you still have other questions.

  • Does anyone use both iPhoto and Aperture

    I just got an mac book pro and I am trying to decide what to do with my iPhoto library that is on my old G4 eMac. I'm wondering if the best (and safest) plan would be to transfer that library to the new machine, bring it into iPhoto and then import the entire library into Aperture.
    On second thought I wondered if it would be a good idea to leave everything in iPhoto and just open images in Aperture only when I want the extra editing tools... using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
    And... is it even possible to import the library from another machine directly into Aperture?
    Thanks in advance,
    bd

    Pick one and stick with it. They don't actually integrate very much.
    Aperture and iPhoto are entirely different applications that work in very different ways.
    The only communication between the two is as follows:
    Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
    Aperture can share its Previews with the iLife apps, including iPhoto.
    That's it.
    So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
    iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
    So if you decide to try this:
    using Aperture for keeping all the "prime" photos and iPhoto for snap shots and iPhone pictures.
    You'll end up using two apps to manage two different sets of photos, with twice the complications. Aperture is not an "external editor" and can't be used as such.
    Think: Writing your novel in Word and TextEdit at the same time. "I'll write this chapter in Word, this paragraph in TE and then back to word..."
    What of you wanted to sync your Photos back to your Phone? Which library will you use? You can't use both.
    And... is it even possible to import the library from another machine directly into Aperture?
    The routine would be to move the Library to the new machine and them process it into Aperture. Then trash the unwanted iPhoto Library.
    Regards
    TD

  • Using both iPhoto and Aperture workflow help

    I am using both aperture 3 and iPhoto 9 to edit and keep track of images
    I imported images to iPhoto the have Aperture import the iPhoto library this way I have i library..I know if something happens to it I am screwed
    1) I know that Aperture is non destructive, is iPhoto?
    2) will changes ( like GPS location) in aperture be applied to iPhoto images
    3) looking to see if I can make changes made in one program appear in the other
    4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program

    Here's the best advice for using both iPhoto and Aperture:
    Pick one horse and ride it. They both do the same job. If you're shooting Raw or high volumes of Jpeg, then definitely go with Aperture. If you're doing family snaps with a point and shoot stick with iPhoto. Using both adds unnecessary complexity to everything, and with complexity comes the risk of error and data loss.
    1) I know that Aperture is non destructive, is iPhoto?
    Yes. In a wholly different way, mind you, but yes. WHen you edit an image in iPhoto it creates a new file called the Modified Version. You can always revert to the Original photo. If you edit only with iPhoto then you can also avoid generational loss.
    2) will changes ( like GPS location) in aperture be applied to iPhoto images
    No.
    3) looking to see if I can make changes made in one program appear in the other
    You can't.
    4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program
    It makes no sense to use both programs.
    Aperture and iPhoto are entirely different applications that work in very different ways.
    The only communication between the two is as follows:
    Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
    Aperture can share its Previews with the iLife apps, including iPhoto.
    That's it.
    So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
    iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
    What are you hoping to achieve by running both?
    Regards
    TD

  • Use both iPhoto and Aperture with one library-best practice?

    I'd like to use both iPhoto and Aperture, but have both programs use/update just one photo library.  I have the latest versions of both programs, but was wondering if the optimum approach would be to:
    a)point Aperture to the existing iPhoto library and use that as the library for both programs
    or
    b)import the entire iPhoto library into a new Aperture library, delete the iPhoto library, and point iPhoto to use the Aperture library.
    I should point out that up to now I've been using iPhoto exclusively, and have close to 20K photos in the iPhoto library, tagged with Faces, organized into various albums, etc; if that makes a difference...
    Appreciate any advice!
    Thanks,
    Dave

    Thanks Frank!  I'll try it that way.
    Appreciate the help!

Maybe you are looking for