Using both phone ports on linksys rt31p2

i have configured both my phone ports to two different service providers on my linksys rt31p2 box.individually both the ports work fine if i get call on either one line at one time,but if i get call on both the lines at the same time,one line becomes totally dead- meaning no voice on either side and one line functions fine.
if i get call on line 1 and while i am talking i get a ring on line 2, the line 2 will have no voice but i can continue talking on line1 without any problem
pls help what to do?
the QOS for voice upstream is enabled and set to 512 kbps
Message Edited by cheetahzee on 04-16-2009 04:21 PM

My 2 phoneline LED's are not on. When inputtting the following VOIP settings:
Proxyserver: sip.voibuster.com
stun server: stun.voibuster.com
Display and userid: the same as registration
They use port: 5060
I have put also port 5060 in the application and gaming settings.
I have tried actually multiple settings and read through all the setup guides and after 5+ hours I thought to ask on this forum for some advise. Hope you have some?! look forward to hear from you.
Message Edited by jackmin on 05-25-2009 11:11 AM

Similar Messages

I am currently using IPhone 4, but recently bought an IPhone 4s. Is it possible for me to keep using both phones? The IPhone 4 will just be an Ipod Touch and Iphone 4S will be my new phone. Thanks..

I am currently using IPhone 4, but recently bought an IPhone 4s. Is it possible for me to keep using both phones? The IPhone 4 will just be an Ipod Touch and Iphone 4S will be my new phone. Thanks..

Using an iPhone without a wireless service plan

Issue Using both Firewire Ports on 24" iMac

I just got a new 24" iMac with the 3.06 processor. I intend to use it with Pro Tools and other music making software. I have an audio interface that is firewire only and an external hard drive (where I store my audio files) that is both firewire and USB. The problem is that I when I use both firewire ports (800 and 400) at the same time, my Pro Tools starts acting up. And I found one post stating that this was a known issue with the 24". But that was back in May and I thought it would have been resolved by now. Anyway, when I use the USB port on my hard drive instead of the firewire, everything works. Also, on my 17" iMac PPC G5 everything works just fine on there, including using both firewire ports a the same time. Finally, I've got the latest updates on all devices involved. Has anyone experienced this problem or have any knowledge of it? Thanks in advance.

I've got a similar problem. I've got a WD external drive connected via FW800 and an Mbox pro 2 audio interface connected via FW400 to my 24" mid 2007 iMac. They both power on (the mbox gets it's power from the iMac) and are recognised by the iMac. However, the WD drive seems to take dominance at some point during start up. The reason I know this is because I was watching the LED on the Mbox light up as I sent it signal from the guitar and then it suddenly stopped lighting up. I tried daisy chaining the mbox to the WD but outcome was the same. Then tried chaining the WD drive to the Mbox (this meant the WD drive was now down to FW400 speed). It worked!!!.............until the next time I started up the computer. The WD drive wasn't recognised by the iMac.
I'm not impressed with the iMac's inability to deal with devices from both it's ports. Why put them on the machine if they can't handle it?
I bought the WD drive to work at FW800 speed and don't want to have to submit to USB 2.0 if I can help it.
Any suggestions welcome.
Thanks

I have a phone in Canada and one in the us. Can I use both phones on the us account and or the canadian account??

I have a phone in Canada and one in the us. Can I use both phones on the us account and or the canadian account??

You have to be in a country to use its store (that is part of the store's terms), so whilst you are in the US you can use the phone(s) that you have with you to buy/download from the store, and similarly when you are in Canada and the Canadian store - you can use the same account on both phones.

Need to use both the ports of PRIME-NCS-APL-K9

Hi all,
I am having NCS prime appliance. In that i have two Ethernet ports. I want to use both the ports for connectivity .
Can anyone please confirm that is it possible to bond these to ports and assign a single ip to these ports.
I wants to have redundancy in case of failure of links.
Thanks in advance ,
Selva

Hi Selva:
This isn't possible today. Whether a physical or virtual NCS/Prime Infrastructure appliance, the two NICs are separate and cannot be etherchanneled, NIC Teamed or combined in any other way with one IP address covering both of them. When both NICs are used, one will be for reaching the GUI for access and the other for sending SNMP traffic over to the managed devices, but most folks use just one.
If you need this functionality, please contact your Cisco SE, Cisco account team or Cisco authorized wireless reseller, and discuss it with them. The sales side of Cisco has procedures in place to accumulate customer inputs like this across all the customers they serve, and to get that input forwarded to the various business units within Cisco for possible inclusion in future releases of Cisco's products.

Aggregate Bandwith of Stacking two Sg500 using both stacking ports?

Is the bandwidth 2Gbps when using both stacking ports to connect just two switches together?

No. If you're using both ports in a two-switch stack, you're using a ring topology and Fast Stack Link Failover will cause the inactive link to be used if the active one fails. Only 1Gb of bandwidth will be available on a single link.
If you want to maximize the bandwidth between the stack members and the switches have close physical proximity, you can use dedicated copper stacking cables (SFP-H10GB-CU1M) to get 5Gb out of each link.

MBA will not allow me to use both usb ports at the same time.

My MBA will not allow me to use both usb ports at the same time. as soon as i plug the second in the first is disabled. trying to use a modem and printer.

What kind of peripherals are you connecting? Sometimes if an external device is drawing too much power, then it will shut down one of the USB ports. Make a test connecting two usb flash drives, it should work ok.

Using both 8800GT ports

So I got a beautiful acer lcd monitor, and I wanted to set up my old Dell crt as a 2nd monitor for palettes & whatnot. The problem is, there's not enough room for both the acer plug and the vga - dvi adaptor I had been using on the crt on the 8800 card - or so it seems to me. I wasn't about to force anything for fear of breakage, but I'm wondering what the issue is. Do I need to go online and find a slimmer connector? And how would I know? Others don't seem to have this problem.... Or am I looking at the whole thing wrong, and I shouldn't do this for fear of overworking the video card?
Any help would be greatly appreciated.

If your Mac Pro came with a nVidia card it should have included a short DVI extension cable with a narrow plug, which will allow the use of both DVI ports. Look in the shipping box that the Mac Pro came in. If you can't find the cable, you can buy a non-Apple narrow DVI to VGA adapter for a lot less than a new DVI extension cable. Here's one for $7.95, including shipping.
<http://www.svideo.com/dvi.html>

Using both usb ports the macbook doesn't charge, is that normal?

Hi, as headline says I'm using both the usb ports of my macbook pro 13", with an external HD and an externat audio interface. The macbook is attached to the charger, but it's not charging (i guess it's using the power without charging). The Macbook it's not fully charged.
thank you
Federico

And what happens if you disconnect everything from the USB ports? BTW, your charger will kick in when the battery charge falls below 94%.

If I sync and install my information in another iphone can I still use both phones

I am syncing my iphone and want to transferr my information to another iphone can I use both iphones?

Yes

27" iMac and two external displays -- using both TB ports best?

Greetings to all.
Currently I have a 2011 Mac Mini to which is connected a 30" Dell display via a Dual Link DVI adapter, and another Dell 21" display via HDMI. I'm planning on getting the 27" iMac and want to check the best way to connect these two displays. While the 30" will still use the Dual Link DVI adapter, should I connect the 21" display via the iMac's second TB port, or via HDMI?

Welcome to the Apple Support Communities
The iMac hasn't got a HDMI port, so you will have to connect your second monitor to your Thunderbolt port, using a Mini DisplayPort to HDMI adapter in order to be able to connect it to the computer

I have two iphones a 3g and 4 and I get problems when I attach the phones ot the computer as the date seem to be transferred form one phone tothe other how could I continue to use both phones on the same computer without getting confused

how do I set up a seperate apple id for my phones I ahvea 3gs and a 4

When people complain about an echo, that's what they are talking about. The echo problem is mostly heard with the caller on the other end.
I have had the situation happen to me and when I unplug the headset the echo goes away and when I plug it back in the echo returns.
I think this problem is much larger than it seems because unless the person on the other end complains about the echo you can't always tell it is happening.

Various problems when trying to use both my iPhone 4 and iPhone 5 at the same time? HELP!

I am experiencing a wide range of problems with both of my iPhones. They are both a 4 and a 5. I will list the problems I am having.
Using both phones:
A few weeks ago I recieved a new phone, the iPhone 5 as my contract was renewed. I backed-up my old phone, the iPhone 4 to my computer and restored it onto my 5. But when using my 5, I discovered it has 'no service' (but will use wifi), it won't send IMs OR texts and Apple constantly keeps asking me for my Apple ID which i recently changed but still uses the old email, and won't accept any passwords.
The 5 used to send IMs and texts but they would be sent to my friends through my email address, so I googled this and went to messages>send and recieve, and the only thing i can select is my email, not my number. I am using the 4 as well, purely so I can send texts and IMs through my name, not my email. The 4 also has signal and wifi, whereas the 5 only has wifi. I am wondering if the 5 has no signal and won't send IMs & texts because I am still using another phone? Surely they both cannot work together, so I was thinking I could reset my iPhone 4, and then see if the iPhone 5 will work, once the second phone isn't used anymore. If that doesn't work, I thought I could reset my 4, back-up my 5 and then restore again. I think that will work, but I have no idea.
I have absolutely had it with trying to figure it out, I have used google but nothing seems to work. I am really hoping someone can tell me what to do with all my phone problems, because they are absolutely driving me mad!!!!!!!!!!!!!!!!!!!
I need to use the 5, it is costing me an extra £60 a month to use and I feel as though that money is being wasted as I can't text, IM or call people. Should i just get rid of the 4 and see what happens? I read online that to stop iMessages coming through as your email, you should turn it off and use regular texts. BUT I DO NOT WANT TO DO THIS. I send way too many texts, and it would cost a fortune. I also can't send photo messages on texts, because they cost a bomb to send through. I want to be able to use both texts and iMessages - using my name, not my email.
To add on to that huge essay I have written, on both phones Apple CONSTANTLY asks me for my Apple ID which I recently changed. I changed the email and the password, and it is coming up with the wrong email, and whatever password I put in, it still says it is wrong. It doesn't make sense, because yesterday I purchased some music from iTunes and when asked for my Apple ID, it used the right email and accepted the correct password. ...??? yet it still keeps getting it wrong, even though it worked in iTunes. ??!?
Okay so I just reset my iPhone 4, and nothing seems to have changed...I thought if I reset it, it would be completely wiped, like a brand new iPhone 4, but it's not....THIS IS SO IRRITATING! Can someone please help me! I GREATLY appreciate any answers, hopefully someone on the internet can fix my problem! thank you for taking the time to read this essay, I am very thankful. PS. Both phones are up to date.

You said, "the 4 also has signal and wifi whereas the 5 has only wifi". By "signal", I'm assuing that you mean cellular signal. If so, that means your iPhone 4 is still active on your cellular number and your iPhone 5 is not. Contact your carrier to sort out which phone is active on your account.

Using both MDP and Mini DVI on 2009 Mini

Can anyone confirm that you can use both video ports to mirror on the 2009 mini? Or is it an either/or situation?

No-one can confirm it until there is an actual 2009 model mini to test. However, all the evidence so far indicates the new mini will support two displays.
The page at http://www.apple.com/macmini/features.html includes:
There’s nothing quite like seeing your photos and movies on a big, beautiful display. Unless, of course, you add a second. Mac mini comes with both mini-DVI and Mini DisplayPort output ports, so you can connect up to two displays....

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Using both phone ports on linksys rt31p2

Similar Messages

Maybe you are looking for