Using built-in iSight with Boot Camp and Yahoo Messenger

Has anyone had a problem using Yahoo Messenger video conferencing by using the iSight?? It shows up as a USB device in the windows hardware but Yahoo says it isn't available. I can use the camera with other programs though. The camera works perfectly on the MAC side (of course). I can't figure out why I can use it for other programs but not Yahoo messenger. Any ideas.
Thanks

Welcome to Apple discussions, DualOSuser
I no longer use YM in any OS, so I have no problems with it.
If your only problem is with Yahoo video, have you checked a Yahoo Help search like this one? Yahoo should be able to give you the best help either to tell you how to make their software work with your system or to tell you the limitations of their software.
You could also check Windows Help in case the problem might be with Windows.
If you think the problem might be with Boot Camp, try searching Boot Camp Discussions.
If you get no help via any of those alternatives, when you post back here for other ideas, tell us which Windows and YM versions you are using. Some Windows user may be able to offer suggestions based on your additional details.
Cheers,
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Similar Messages

Can I use Windows XP Home with Boot Camp and/or Parallels or VMFusion?

I am planning on purchasing a new Mac Mini with Snow Leopard. I have a copy of Windows XP Home Edition that came with a 7 year old Compac computer, can it be used with either Boot Camp and/or Parallels or VMFusion? I REALLY don't want to purchase Windows if I can help it. Thanks!

Read the boot camp requirements. I believe you will need a Windows disc that is stand alone. By that I mean a Windows disc that is not designed for a specific computer like your Compac. I believe that applies for Parallels and Fusion as well. Some of the newer disc that come with new computers may work since some of them are stand alone. I think your compac disc maybe married to your computer. You can try it when you get your Mac but it may not work.

Need help with Boot Camp and Win 7

I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
Mike

Mike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger

Installing Windows 7 RC1 with Boot Camp AND Parallels?

I have a 24" iMac (2009 model) and have successfully installing Windows 7 RC1 using Boot Camp. No problems at all and everything is working fine. But now I'm contemplating purchasing Parallels and using Windows 7 in a window.
I just need to know the steps involved and how this works. First I purchase and install Parallels. Then I run it and somehow tell it to use my Boot Camp partition for the VM, right? In this way, I'm assuming I don't actually have to install Windows 7 again or make another partition, right? Once I get the VM installed, then I can either boot to Windows 7 from startup OR boot from within Mac OS using Parallels and it would be the same?
If I can do it this way, can anyone point me to step-by-step instructions on how to choose the right settings in Parallels? I have found instructions for installing Windows 7 using Boot Camp and Parallels separately, but not how to use the Boot Camp install for the VM in Parallels.

Wow, it was much easier than I thought it would be! Downloaded the trial of Parallels. Installed it and pointed it to my Boot Camp partition with Windows 7 installed on it. And minutes later, I'm up and running with Windows 7 in Parallels. Sound didn't work at first, but after I did a Windows Update, it installed the correct driver and now everything is working great. I can't believe how smooth this thing runs within Leopard. I allocated 1GB of RAM for WIndows 7 and it's seems fine so far, but I really haven't run any resource-intensive apps yet.

Problems with Boot Camp and Drive Partition

First of all, let me preface this by saying I have in the past successfully partitioned my drive and installed Windows, but it was a while back and I can remember it was frustrating, but I don't remember the exact details. Also, I apologize for the rambling nature of this problem, but I'm trying to give as much relevant information as possible and walk through the steps I took to get where I am now.
Feel free to skip ahead to the end, the main problem seems to be I tried to create a 300 GB partition, but it didn't take or something. Now my storage is reflecting I've lost 300 GB, but it won't recognize the existence of the new partition.
Let me just walk through what I did. I deleted my previous partition because I was having some difficulties with a few programs and the partition ended up being too small and I wanted to make a bigger one anyway. I only use it for gaming and didn't care about any of the saved games so I just deleted the partition and figured I'd start over from scratch.
Before I begin, some technical details about the computer I'm working with. I don't know how much of this is necessary, but here it is:
It's a 27-inch late 2012 iMac with a 3.4 GHz Intel Core i7 processor with 24GB RAM running OSX 10.9.4
The storage space is a little more difficult as that is part of the problem I'm running into, which I'll get to in a minute.
Anyway, I have a Windows 7 Professional install DVD and a burned CD called Boot Camp, which I think is the drivers from last time I installed Windows (a year and half ago?), but since I needed Superdrive for the install DVD I just used an XHD I had to put the drivers on (like I said, I don't remember how I did it last time). I go through Boot Camp and look at how much space I have and how big I want to make my partition.
Side note: Last time I made my partition, I'm fairly certain I set it to 200 GB, but the partition size actually came out to something like 112 GB or something significantly less. I didn't know what happened, but figured it would still be enough space and it had been such a hassle I didn't bother doing it again.
Supposedly I have a 1 TB HD, and I can't remember exactly what it said when I partitioned the drive this time, but it definitely said I was using less than half of my capacity and I had plenty of room, so I opted to go for a 301 GB partition (the slider wouldn't let me do exactly 300) which still left me with around 300 GB of space left over on my Mac partition I want to say. I went ahead with it and it started partitioning the drive with the blue line moving very slowly and after an hour or so it was like 80% across but no longer making progress. I looked online and people said that shouldn't happen. I cancelled the partition and the Disk Utility showed the partition, but said it was unmounted or something.
I restarted my computer thinking maybe I'd try and see what would happen if I tried to boot it up as if I had Windows installed. I also at that moment remembered that I'd had a similar problem last time because I had my XHD plugged into my USB port so I unplugged that and held down OPT. It then showed me my Mac HD drive and a CD icon that said Windows, so I clicked on that figuring maybe I could install it after all.
It led me through a Install manager and it got to the point where it asked what drive/partition do you want to install Windows in, I recognized the screen and remembered I was supposed to choose a certain one, but couldn't remember which one and none of the sizes seemed to match the storage I had allocated to the partition. One was about 200 GB and since the last time I did it my partition came out 100 GB smaller than I had set it for I thought maybe that was it.
However, it said I couldn't install on that drive for some reason (I can't remember exactly what it said). So I restarted again and figured I'd go back and see what I did wrong and start over. When I check Disk Utility it no longer sees any partition (mounted or unmounted or anything) and that the entirety of my HD is dedicated to Mac HD.
The problem is, now I'm getting weird reports about the size of my drive, the amount used, and the space available. Disk Utility tells me I have 1.12 TB capacity, 301 GB available, and 819 GB used. That doesn't even add up. Furthermore, when I click get info on Macintosh HD, it tells me I have 810 GB capacity, 364 GB available, and 446 GB used. When I click on About this Mac and go to System Report and storage I get this:
Macintosh HD
Available: 364 GB
Capacity: 810 GB
Logical Volume Group:
     Name: Macintosh HD
     Size: 1.12 TB
     Freespace: 301 GB
Physical Volumes:
     disk0s2:
   size: 121 GB
     disk1s2:
     size: 999 GB
Now I really don't know what to make of it. That 301 GB free space makes sense as the partition I tried to create and if I add that to the 446 GB used on my Mac partition, plus the 364 GB available, that adds up to 1.12 TB (roughly, I've rounded off these numbers).
But how come Disk Utility doesn't recognize the partition then? What should I do from here?
I couldn't find anyone asking this exact type of question or running into this same problem before, so I hope I'm not asking about something that's already been answered. If that's the case, if you could direct me to where I can find the answer I'd be appreciative.
Otherwise, any help or light that can be shed would be most appreciated.
Thanks!

The problem seems to have gone away. I did click on repair disk in Disk Utility, I'm not sure if that did anything, but now when I run Boot Camp Assistant it is showing me the correct free space, so I don't know what happened. Oh well.
Still having trouble getting the **** thing to partition, but that topic is covered extensively elsewhere.

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

I have a problem with boot camp and maybe macbook pro?

I am having issues with boot camp here is what I did.
I attempted to partition for windows then this message popped up after 2 minutes:
Verification failed. this disk could not be partitioned.
Use Disk Utility to repair this disk.
so I used the disk utility to repair the problem then this message came:
First Aid failed
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file Temp File
(It should be 13 instead of 0)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume bitmap.
pair",0)
Checking volume information.
Invalid volume free block count
(It should be 23087569 instead of 23087570)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

Problems with Boot camp and External HDD's

Hi, I recently installed windows XP using Boot Camp, and everything worked fine, until yesterday when I tried to reboot into MAC from WINDOWS. It restarts back into windows everytime, and now I can't get back to mac! (using leopard, not snow leopard) Whats wrong?
Another thing, I have a 500gb Lacie ext HDD, and I can use it fine with mac, but when I tried to access it with windows, it won't work. It will appear in My Computer but when I log in it won't access the data. What can I do?
Im using the HDD for backups with time machine, is this why windows cant access it?
Thanks in advance

FAT32 will accessible from both Windows and OS X
If you don't want to reformat your ext drive you need something like http://www.paragon-software.com/home/hfs-windows/ or http://www.mediafour.com/products/macdrive/

Problem with boot camp and windows 8

I have a Macbook late 2009 with Mountain Lion. I want to install windows 8 with boot camp but when I am asked to enter drivers, windows 8 don't find them. I have downloaded drivers from boot camp assistant but they don't work. When Apple will provide ???

Obviously Boot Camp does not support Win 8 at this time. When and IF Apple decides to do that no one here knows. This is a user to user forum. Perhaps you should call Apple support and ask them.

HT5639 Can I use usb internet sticks and/ or printers which don't speak apple with boot camp and win 7/ 8?

Hello all,
As a reference point for my technological skills, I work in international development and in timber framed building construction and repair. Beyond Ford full- size pick-ups pre 1993, I mostly employ 19th century systems.
This MacBook Pro is marvelous, but won't read or accept some older printers and usb internet sticks. There is also a problem with windows 8 on many of these international and older/ cheaper US devices. Will a MacBook Pro be able to communicate with them in windows 7 running on Boot Camp, or on any of the other Windows on Mac platforms? Does one work better with old stuff than another? Are any of them simpler/ more intuitive to use than others? Any informtion or suggestions, no matter how basic would be appreciated.
Thanks,
Rob

I have tried it with all 3 options. I tried the first two options with the printer plugged into port 1 on the adapter and the third option with the printer plugged into port 2. This means that I may have effectively installed all 3 options/scripts. Do I need to throw them away and start again?
Running the Choose Serial Port script writes a file that is used in processing print jobs. If you run the script a second time, it will replace the existing file with a new file.
Do I also need to configure these ports in the network settings under System Preferences?
No.
I notice too that no 'location' is given for the Stylewriter II, whereas a location is given for my other (Lexmark) printer, which is connected to the G5 iMac directly via a USB cable.
That is of no consequence. Use of the Location field is optional.
I would suggest you proceed as follows:
1. Go to the /Library/Receipts folder at the root of your hard drive. Delete the item Foomatic for StyleWriter.pkg.
2. Start the installation over from the beginning. Install the Foomatic for StyleWriter software.
3. Run the Choose Serial Port for StyleWriter script. Upon further reflection of your possible use of two Keyspan adapters, I would suggest you choose the serial port with the format USA28X...P1.1 rather than KeySerial1.
4. Run the Add StyleWriter to Printer List.
Try printing a document. If it still does not work, download a troubleshooting script from my website http://webpages.charter.net/mbroughtn/downloads/Test7Stylewriter.command.zip Run the script. Copy and paste the contents of the Terminal window in a reply. That should point to what is going wrong.
Matt

How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

Yes, you’ll be able to do that.
(116841)

How can I get MagicTrackpad to work with Boot Camp and Windows Vista?

Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
TIA,
Picman

UPDATE
Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
Thanks,
picman

Com port failed with boot camp and snow leopard - Please help!

Hi. I have been a very happy leopard and macbook user for the last couple of years. This week I upgraded to a macbook pro with OS X 10.6 snow leopard. I set up boot camp with Windows XP SP3as I have a couple of windows only applications that I need to use and they both need serial port. I had a Keyspan USA 19-QW serial adaptor that worked fine with Leopard and my old macbook. I installed the driver that came with the Keyspan adaptor. Now when I plug the adaptor into the USB slot it finds new hardware and says it is ready to use and the adaptor is listed in my ports as being on COM3 in device manager in windows but when I try to run the programs I get the message 'the selected port could not be opened. Either the port is in use by another application, or the port doesn't exist'. I'd be very grateful for any advice you can give me to solve this problem. Do I need to buy a new adaptor? Is this a settings or driver issue? I'm a user and not a techie person so please can you leave me easy step by step help. Many thanks. Karen

And was wodering if snow Leopard is pré installed
Yes.
And also which disc that came with thé machine has boot camp on it
None. Windows is a separate purchase.
i havé read that to install windows7 you need to pût thé snow leopard disc in to complete thé installation
That refers to the Boot Camp drivers for Windows, not Windows itself.
(53272)

A Question about Windows games with boot camp and system requirements

I don't plan to play many games on my Mac, but after seeing what can be done with it, I've been entertaining the idea of picking up a Windows game or 2 to play in Boot Camp (considering picking up a XP PRO with SP2 for this).
My question is about the listed systed system requirements and how they might apply to my Mac Pro. I have a dual 2.26.
As a specific example, I was looking at the game Fallout 3. The box lists a 2.4ghz processor required but I've read on this forum about people running it great with less on their Mac.
So I was wondering what I would need to consider when looking at those requirements or if games in that range do indeed run well...

Thanks Kap, you're always helpful.
That's exactly what I was wondering. How the requirement on the box applied to having an 8 core at a lower clock speed.
I was looking at XP home at amazon and newegg, but haven't been able to tell if they are 64 or 32 (unless that means just install that version from the disc).
It's nothing pressing, just something I was entertaining for now.

Using built in isight with quicktime pro to record video

Ho do I get quicktime pro to recognize my built in isight as the video recording device?
thanks

i rebooted

Using built-in iSight with Boot Camp and Yahoo Messenger

Similar Messages

Maybe you are looking for