Using C# with Oracle Internet Directory
My apologies if this is the wrong forum for this but I'm hoping someone here can at least point me in the right direction.
I am trying to connect to OID with C# 3.5 and have been completely unsuccessful. The .Net DirectoryServices namespace seems to be Active Directory specific. If anyone has any suggestions I would greatly appreciate it.
Thanks,
Kevin
Hi,
ODP is oblivious to what naming resolution you use, it simply passes that information on to the client and the resolution is done there.
Is this behavior ODP specific? Do you have sqlplus installed as well? Does that connect succesfully using OID? If so, do you have more than one home? One thing I see happen is folks have multiple homes installed and they test "home1" and it works, install ODP into "home2" and have TNS issues. The two homes are seperate and both sqlnet.ora and tnsnames need to be configured in both, or set a TNS_ADMIN environment variable to point to the directory you want to use for tnsnames/sqlnet.
If this behavior is truly ODP specific, the correct forum fyi is [over here|http://forums.oracle.com/forums/forum.jspa?forumID=146]
If the behavior is not ODP specific, but rather a generic OID issue, I'm not sure but I think maybe [Identity Management|http://forums.oracle.com/forums/category.jspa?categoryID=195] might be the right forum; at least I see there are some other OID posts there.
Hope it helps,
Greg
Similar Messages
-
Integrating Oracle Virtual Directory with Oracle Internet Directory
Hi Experts,
Just wanted to know suggestions from you.... what are the advantages we have by integrating Oracle Virtual Directory with Oracle Internet Directory.
Thanks
parker.Hi Ken/Experts ,
Thanks for your response.
Still we need some more clarification on My Requirement that is, we are using ‘Oracle Single Sign On’ for my product and OID (Oracle Internet Directory) is enabled for this Single Sign On. Now we are planning to use OViD (Oracle Virtual Directory) for our Product so we integrated OID with OViD and now we are able to view the OID users in OViD. But Still My Product is using Single Sign On, which is enabled with OID only. Do we need to enable OViD (Oracle Virtual Directory) for Single Sign On? If yes please help us how to integrate (enable) OViD with Single Sign On.
Thanks in advance.
Thanks,
Parker -
Register with Oracle Internet Directory
During installation of Oracle Application server window appear for Register with Oracle Internet Directory
Host :
Port:
what should enter here.Hi Xaver,
Seems ur installing OAS10g r2,
Host:is ur server's ip addess where ur installing Application Server
Port:389(its a default port for Oracle Internet Directory)
Regards
Fabian -
OCS 10.1.2 using Oracle Internet Directory R3 (10.1.4)
Hello people...
Somebody knows if it is possible that OCS 10.1.2 can use an existing Oracle Internet Directory 10.1.4?
Documentation specify compatibility with OID 9.x versions and obviously OID 10.1.2 and Certify list of Collaboration Suite for Identity Management specify only version 10.1.2 and no for the new latest version 10.1.4.
I think that both documents were written before the release of Identity Management 10.1.4. Are you test in your environments this configuration? works?
Thanks in advance for your comments...A para in a metalink note states that ocs 10.1.2.3 portlets can be deployed on a portal 10.1.4 using IAS 10.1.2 infra structure(but i donot think that oid version is 10.1.4 ).
According to Note:389677.1
Check the list of possible scenarios for OCS portlets - Portal coexistence to see, what is possible and what is not possible: ·
OCS 10.1.2.x is shipped with Portal 10.1.2.0.2 and the OCS 10.1.2 portlets can be used with a 10.1.2.0.2 Portal ·
OCS 10.1.2.x portlets can be deployed to a 10.1.2.0.2 Portal ·
OCS 10.1.2.0.0 portlets cannot be used with a Portal 10.1.4 · OCS 10.1.2.1.0 portlets cannot be used with a Portal 10.1.4 ·
OCS 10.1.2.2.0 portlets can be used with a Portal 10.1.4 and they can be deployed to a 10.1.4 Portal.This scenario is supportet, but not certified yet.Mandatory prerequisite is the OCS cumulative patch 10.1.2.2 (see Note 352989.1) or better OCS cumulative patch 10.1.2.3 (see Note 361082.1)
Following scenarios were tested by Oracle Support - but these are not certified yet:·
OCS 10.1.2.3 and 10.1.4 Portal using the OCS infrastructureNote 392913.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using OCS Infrastructure Note 392913.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using OCS Infrastructure ·
OCS 10.1.2.3 and 10.1.4 Portal using an 10.1.2.0.2 iAS infrastructureNote 393590.1
How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using IAS Infrastructure Note 393590.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Using IAS Infrastructure · OCS 10.1.2.3 (using OCS infrastructure) and Portal 10.1.4 using another iAS 10.1.2.0.2 infrastructureNote 390467.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal Note 390467.1 How To Register OCS 10.1.2.3 Portlets To External 10.1.4 Portal -
Does Oracle Internet Directory come with Application Server 10g Release 3
I noticed Appserver 10g 10.1.3 does not have as many components as Appserver 10.1.2. It does not even come with Oracle Internet Directory. Do I need to install Appserver 10.1.2 first and then upgrade to Appserver 10.1.3?
Nope. Doesn't work that way. AS 10.1.3 is a different release...
Perhaps one way of seeing AS is as a family name for sets of application platform products or technology. The "core" of AS is OHS and OC4J + management, for many of the releases or product sets (i.e. not all of the AS family are or were based on OC4J). On top of that core, Oracle adds products depending on the release.
If you go from the Downloads menu -
You would see that (currently) 10.1.3.x or 10.1.3.1 ("for deployment" - See All) is e.g a SOA Suite release. It also has Service Registry, Data Integrator and WebCenter Suite.
AS 10.1.3.0.0 is a OC4J release, if I'm not mistaken, to include support for Java/JDK 5.
AS 10.1.4.0.1 is a Identity Management release.
If you are looking for other app server products such as Discoverer or Reports Services, the latest release that I know of is 10.1.2.0.2. If you have AS 10.1.2.0.x, you may upgrade the including products via a patch set to 10.1.2.2 or later. Portal and IM components in this release may be upgraded to 10.1.4.x.
Also note that AS patch sets might introduce some additional version number confusion.
Combining different releases into mid-tier and infrastructure services is possible, if you need to stay with the latest features (such as a setup with 10.1.2.x mid-tiers using 10.1.4 Identity management). See Upgrade and Installation guides for information and configuration rules.
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Message was edited by:
orafad -
Workflow - Oracle Internet Directory synchronization
In order to sychronize Oracle Workflow with OID, do i have to create custom object classes into the LDAP schema? When i'm using the classes 'person' or 'employee', in the WF_LOCAL_USERS table some columns have the string '*UNKNOWN*'. Moreover, i can't login to the workflow using these usernames.
Does anyone have a clue?
ThanksSee following notes on Metalink:
207225.1 Setting Up Oracle Workflow 2.6.2 with Oracle Internet Directory and Single Sign-On and
210796.1 Integrating Oracle Internet Directory Groups into Oracle Workflow Release 2.6.2 users with Workflow.
Regards,
Mark -
Configure WebSphere Portal Server to use LDAP (Oracle Internet Directory)
I did configuration for WebSphere Portal to use security with LDAP Oracle Internet Directory (OID). The script for configuring works well (WPSConfig.bat action-secure-portal-ldap)
But when i start Portal Server it cannot start successfully. I did check in log file and found a error on SystemOut.log as attachment log below. I don't know what happen with WebSphere Portal Server.
If you guys know how to fix it please let me know or point me some documents to configure this again.
Thanks in advanced.
Servlet E com.ibm.wps.engine.Servlet init EJPFD0016E: Initialization of service failed.
com.ibm.wps.ac.DomainAdministratorNotFoundException: EJPSB0107E: Exception occurred while retrieving the identity of the domain adminuser/admingroup uid=wpsadmin,cn=Users,dc=localhost,dc=com.There is no clear documentation available to enable custom security but IBM info center has decent documentation for LDAP based security. I would say follow the steps mentioned for IBM directory and then modify the necessary configuration parameters for OID. This should solve your issues. For better help open a PMR with IBM to get necessary quick help.
-
How to add users/entry in the oracle internet directory using XML file
hi friends,
i need to know how to add entries, attributes in the oracle internet directory using the XML file.I could able to execute the ldapadd command with out error as
ldapadd -h islch-532.i-flex.com -p 389 -D "cn=orcladmin" -w password -X mypath/filename.xml
but the data entry is not added in OID. can any one help me out. -
How to populate custom USER table with data from Oracle Internet Directory?
Hi all,
We have a Users table in our internal forms application.
I want to populate this USERS table each time users are added in Oracle Internet Directory.
Likewise for modification and deletion.
How to go about doing this ?
I know that it involves Oracle Directory Provisioning Integration Service and we might have to use LDAP_NTFY plsql proc to implement this.
Am I on the right track ? Can anyone point me to the exact steps to go about synching up the USERS table from Oracle Internet Directory ?
Thanks,
SamTo handle using DIP, refer to the Oracle Identity Manager, Application Developers Guide. That gives recommendations on the ldap-ntfy package.
Handling the operation using OID plug-in will have performance impact on the ldap operations performed on OID. -
Oracle Single Sign on and Oracle Internet Directory
Hello Gurus,
What is the relationship between Oracle Single Sign on and Oracle Internet Directory.
To my understanding, OID is required to install SSO.
If OID already exist, can we just install SSO and go on integrating it to existing OID.
Great Thanks,
vimal jain.
[email protected]Hi Tim,
I've been working on this and could reproduce the issue with anonymous binds. A fix will be ready in 4.2.1.
So what I really need is the password used for login to pass to the is_member call.The P101_PASSWORD item does not save state. However, you can access the value during submit processing of the login page, for example in the post authentication function of your authentication scheme. People sometimes put code in there to query the user's groups (e.g. with apex_ldap.member_of2) and save them in an application. This item value can then be used in the authorization schemes.
Regards,
Christian -
Oracle Internet Directory - query.
Hello ,
I have query.. as below.. plz provide inputs..
While installing OID, is it mandatory to install Oracle DB... ?
If not, then any idea what is the DB used for OID in the backend ?
Thank you,
GopsHi Gops,
Follow the below sequence to make your Oracle Database/RAC usage for OID at the backend
1) Oracle Database 10g (Version 10.2.0.1). Install the database software only
2) Upgrade the Oracle Database 10g from 10.2.0.1 to 10.2.0.4 (OID requires a Metadata Repository Database which is certified)
3) Install Oracle Database 10g Companion for Ultra Search Option
4) Create a database instance using dbca utility tool, with following DB initialization parameters to be updated while creation (aq_tm_process --> 3 , db_cache_size --> 157286400 , shared_pool_size --> 209715200 , java_pool_size --> 136314880, sesssion --> 500)
5) Install MRCA on top of Oracle Database.
6) Install Oracle Internet Directory using Identity Management Option.
Hope this will help you out.
Thanks,
Ajay Babu Pentela -
OIM 11g installation : Create Oracle Internet Directory Failed
Hi, everyone,
I have try to install OIM 11g for many times , but also error happened....
I did like follow:
1, install OS, window 2008 R2 64bit.(I have install oracle database 11g on another machine.)
2, install weblogic 10.3.3 (without config domain)
3, install OIM 10.1.1.2 64bit (without config, only software)
4, install OIM patch set2 10.1.1.3 64bit
5, use config.bat to config...
select the new domain ...
but , when start the Oracle Internet Directory , error happened and message like followed..
AdminServer port is 7001
trying to connect to TPC3013 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to TPC3013 7001
Successfully connected to the Domain Runtime ...
trying to connect to TPC3013 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@5e83450d
TPC3013 7001
Instance asinst_1 already exists, continuing with component creation
C:\Oracle\Middleware\Oracle_IDM1 C:\Oracle\Middleware\asinst_1 asinst_1
oracle.as.config.ProvisionException: OID-23663
at oracle.iam.management.oid.install.wls.OIDComponentHelper.setSuperUserCredentials(OIDComponentHelper.java:2267)
at oracle.iam.management.oid.install.wls.OIDComponent.postCreateConfig(OIDComponent.java:343)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:145)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:522)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:438)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:865)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.ldap.util.UtilException: NamingException encountered in ldapModify [LDAP: error code 32 - No Such Object]
at oracle.ldap.util.Util.ldapModify(Util.java:2555)
at oracle.iam.management.oid.install.wls.OIDComponentHelper.setSuperUserCredentials(OIDComponentHelper.java:2254)
... 19 more
help, thanks.I think this
+Caused by: oracle.ldap.util.UtilException: NamingException encountered in ldapModify [LDAP: error code 32 - No Such Object]+
shows the cause of error.
I entered dc=com for OVD and realm: dn=myrealm for OID. Is it correct?
Edited by: mfedo on Apr 15, 2011 12:43 AM -
Migrating Oracle Internet Directory Data
We are trying to migrate oracle internet directory data from one of our test environments to the production environments. Both the environments are running on windows 2000 Operating Systems.
We are followiing the procedures mentioned in the Oracle Application Server 10g Administrator's Guide for the migration. But in one of the sections there is a command that uses unix shell script files - catalog.sh
This doesnt work in the windows environment, and only after completing this task I can proceed with the migration. Can anyone let us know if there is any windows equivalent file for this catalog.sh. How to proceed from here..Arnal,
Is this really a Portal thread?
Anyway... Maybe you have two options here (for example):-
1. Either use the CYGWIN.
2. Use the LDAPSEARC & LDAPADD to bring everything from Source to Target. In the middle change/substitue the necessary strings, ie, like for example domain.
I hope it helps...
Cheers,
Pedro. -
Customizing Resource Adapter for Oracle Internet Directory
Hi,
I want to integrate an application which has Oracle Internet Directory as resource. I need to develop a resource adapter for integrating. As Oracle Internet Directory is LDAP v3, can I use LDAP resource Adapter for interaction, if so what customization is required?
can any one give suggestion reagrding this?Hi Bahaugab,<br>
I am working Oracle OID. I can able to add/modify/delete users from my resource configuration. But I am getting active sync problem with OID. It throws exception like :<br>
From the admin console please verify that the change log is enabled under Configuration: Replication: Supplier Settings and that the Retro Changelog Plugin is enabled under Configuration: Plug-ins: Retro Changelog Plugin
<br><br>
But change log is enabled.
<br><br>
I want to know whether your active sync worked?
<br><br>
thanks<br>
Neopal<br><br> -
Error while configuring Oracle Internet Directory
Hi All,
I have installed OID according to instructions in
http://download.oracle.com/docs/cd/E21764_01/install.1111/b32474/start.htm#BEHHHCBB
I was trying to configure OID using instructions given in section 6.5 Only OID Without a WebLogic Domain at below url
http://download.oracle.com/docs/cd/E21764_01/install.1111/e12002/oid.htm#CIHHFIGC
The configurations is failing in creation of directory giving an error below:
[2011-11-15T12:14:40.321+05:30] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] Ports: nonssl= 3060 ssl= 3131
[2011-11-15T12:14:40.321+05:30] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] Creating OID specific directories
[2011-11-15T12:14:40.321+05:30] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] JPS Files already exist: oracle.as.config.ProvisionException: Dest file (C:\Oracle\Middleware\asinst_2\config\JPS\jps-config-jse.xml) already exists.
[2011-11-15T12:14:40.321+05:30] [as] [NOTIFICATION] [] [oracle.as.config] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] Files already exist: oracle.as.config.ProvisionException: Dest file (C:\Oracle\Middleware\asinst_2\config\JPS\system-jazn-data.xml) already exists.
[2011-11-15T12:14:41.774+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [[
java.lang.NoClassDefFoundError: oracle/security/xmlsec/util/Base64
at oracle.security.jps.internal.common.util.JpsCommonUtil.<clinit>(JpsCommonUtil.java:204)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:154)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:165)
at oracle.iam.management.oid.install.wls.OIDComponentHelper$1.run(OIDComponentHelper.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.iam.management.oid.install.wls.OIDComponentHelper.setCredInCSF(OIDComponentHelper.java:389)
at oracle.iam.management.oid.install.wls.OIDComponentHelper.setPasswdsInCSF(OIDComponentHelper.java:361)
at oracle.iam.management.oid.install.wls.OIDComponent.onCreate(OIDComponent.java:177)
at oracle.as.config.impl.OracleASComponentBaseImpl.createComponent(OracleASComponentBaseImpl.java:596)
at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:105)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:144)
at oracle.as.provisioning.fmwadmin.ASComponentProv.createComponent(ASComponentProv.java:73)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createComponent(ASInstanceProv.java:401)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createComponent(ASInstanceProv.java:358)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:136)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:537)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:820)
at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:855)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: oracle.security.xmlsec.util.Base64
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
... 29 more
[2011-11-15T12:14:41.774+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY bb084f6d-09f4-4737-b462-a0a877a439db
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID bb084f6d-09f4-4737-b462-a0a877a439db
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35076
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error creating ASComponent oid1.
Cause:
An internal operation has failed: oracle/security/xmlsec/util/Base64
Action:
See logs for more details.
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@1cc678a
[2011-11-15T12:14:41.774+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2011-11-15T12:14:41.774+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2011-11-15T12:14:41.774+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:OID
[2011-11-15T12:14:41.774+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 12] [ecid: 0000JE_xudK9d_QwI^e9Sv1EkWaj000003,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
===================================================================
It is not able to find the class oracle.security.xmlsec.util.Base64.
I was able to find a related thread on this issue at Oracle Internet Directory Config Error Linux x64 java.lang.NoClassDefFoundE
but didn't find much helpful.
The setup details are as follows:
Weblogic Version: 10.3.5
RCU Version: 11.1.1.3.3
IDM version: 11.1.1.2.0 (release version) Upgraded to 11.1.1.5.0 (Patchset version)
Also Oracle IDM installation has the jar file odst_xmlsec.jar having the Base64 class.
Please let me know if you see any issues.
Thanks in advance,
Vikrant
Edited by: 894449 on Nov 16, 2011 1:01 AMHi,
Please try
"Error Creating ASComponent Oid1" Error During OID Configuration When Installing OID11g (Doc ID 1427253.1) that should resolve the issue.
Maybe you are looking for
-
Follow sprite when the mouse is down, but randomly move when mouse is up?
I have a sprite that has a Random Movement behavior. While the mouse is down, I want it to stop this behavior and initialize a Follow Sprite behavior instead. When the mouse is lifted, I want to stop the Follow Sprite behavior and reset/restart the R
-
How to Access a BPM container variable in XI graphical message mapping
Hello XI BPM and Mapping experts, is it possible to access a BPM container variable from an graphical mapping? If yes, how ? We need this for the following scenario: IDOC to BPM. BPM transforms and sends transformed IDOC to fileadapter If both steps
-
How can I fill in a form, save the form such that it cannot be further altered, and email it as it was saved? I created a form with 5 fields. It is a form letter that is intended as a receipt for funds received. I want to fill in the date, name, a
-
Problem in AIAB - Distribute (Capitalize Asset u. Const.)
In table ANEP, I can see the all register of my asset Capitalize Asset but in transaction AIAB I can´t see the class movement 891 and 892 (revaluation) Please help....
-
my ipod touch was stolen, now it won't let me download i cloud, and everything that was on it was erased, not sure what to do? the ipod is only 6 weeks old!