Using Calibration Executive for PXI-5610 using PXI-5124

Hi guys,
We've been trying to calibrate PXI-5610 but the Calibration Executive software pop up an error of PXI-5122 requirement but we don't have the module, we have the PXI-5124 instead. We have tried to use the unsupport but it's not working too.
We have found that their resolutions are different
PXI 5124 http://sine.ni.com/nips/cds/view/p/lang/en/nid/14231
PXI 5122 http://sine.ni.com/nips/cds/view/p/lang/en/nid/12615
Is this the cause of error? Is it possible to use PXI-5124 instead of PXI-5122?
FYI about our system
Chassis PXI-1010
Software: Calibration Executive 3.3
For any further recommendations, please let us know, thanks in advance.

Hi, somebody here?
I'm not sure if we have specified forum for this issue, please help let me know.
Thanks...

Similar Messages

We would like to use Calibration Executive to calibrate NI 5673, but do not have an R&S FSU.

We would like to use Calibration Executive to calibrate NI 5673, but do not have an R&S FSU. The "note" in the required equipment table mentions: National Instruments strongly recommends using the instruments specified above when calibrating the NI 5673/5673E module. Substitution of instruments is permitted by Calibration Executive software, but National Instruments cannot guarantee. . . Does that mean there is still a way to automate measurements using a different Spec An, or does it mean we'll simply be able to designate a different Spec An, but have to make the measurements manually at each point? We're interested in using the Agilent E4440A we have.

Greetings,
You will be able to designate a different Spectrum Analyzer, but because the Agilent Spectrum Analyzer is not on the list of supported hardware you'll have to take the measurements manually.
Thanks,
James Duvall
Product Support Engineer
National Instruments

In using MS Word for mac, and using track changes, and I send a copy, the recipient cannot see the track changes, nor do they show up on the printed copies, even though I highlight show changes in print

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

In using MS Word for Mac, and in using Track Changes, when I send an email with the changes, the recipient cannot see the highlighted changes, nor do the printed pages show the highlighted changes, even though I have checked "show highlighted changes"

Using FileIOInteractionSpec Class For Moving File using File Adapter

Hi All,
I am tring to use FileIOInteractionSpec class to move a file from one location to another. The problem is that I am not able to override its properties from BPEL, here is how the FileAdapter.jca file looks like which moves the file from one location to another:
<adapter-config name="MoveFileService" adapter="File Adapter" wsdlLocation="MoveFileService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter"/>
<endpoint-interaction portType="MoveFile_ptt" operation="MoveFile">
<interaction-spec className="oracle.tip.adapter.file.outbound.FileReadInteractionSpec">
<property name="DeleteFile" value="true"/>
<property name="PhysicalDirectory" value="C:\FileRead"/>
<property name="FileName" value="dummy.txt"/>
</interaction-spec>
</endpoint-interaction>
*<endpoint-interaction portType="MoveFile_ptt" operation="Move">*
*<interaction-spec className="oracle.tip.adapter.file.outbound.FileIoInteractionSpec">*
*<property name="Type" value="MOVE"/>*
*<property name="SourcePhysicalDirectory" value="C:\FileRead"/>*
*<property name="SourceFileName" value="dummy.txt"/>*
*<property name="TargetPhysicalDirectory" value="C:\FileRead2"/>*
*<property name="TargetFileName" value="dummyCopy.txt"/>*
*</interaction-spec>*
*</endpoint-interaction>*
</adapter-config>
In the above code, I have hard-coded the values, and it works fine like that.
However, when I try to override these values by defining properies in BPEL invoke's tag, the values are getting passed as null.
Here is the invoke tag code, tried the following 2 combinations:
<invoke name="InvokeFileMove"
inputVariable="InvokeFileMove_MoveFile_InputVariable"
partnerLink="MoveFileService" portType="ns1:MoveFile_ptt"
operation="Move" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="jca.file.SourcePhysicalDirectory" value="C:\FileRead"/>
<bpelx:inputProperty name="jca.file.SourceFileName" value="dummy.txt"/>
<bpelx:inputProperty name="jca.file.TargetPhysicalDirectory" value="C:\FileRead2"/>
<bpelx:inputProperty name="jca.file.TargetFileName" value="dummyCopy.txt"/>
</invoke>
And
<invoke name="InvokeFileMove"
inputVariable="InvokeFileMove_MoveFile_InputVariable"
partnerLink="MoveFileService" portType="ns1:MoveFile_ptt"
operation="Move" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="SourcePhysicalDirectory" value="C:\FileRead"/>
<bpelx:inputProperty name="SourceFileName" value="dummy.txt"/>
<bpelx:inputProperty name="TargetPhysicalDirectory" value="C:\FileRead2"/>
<bpelx:inputProperty name="TargetFileName" value="dummyCopy.txt"/>
</invoke>
These four properties are not visible in Invoke -> Properties tab as well.
Could you please suggest how can I override the jca's values for FileIOInteractionSpec class?

I have successfully used this API and it works fine.
Try to use variables which contains values like "dummyCopy.txt" etc.
Here is what I used :
<bpelx:inputProperty name="jca.file.SourceDirectory"
variable="inputDirectory"/>
<bpelx:inputProperty name="jca.file.SourceFileName"
variable="inputFileName"/>
<bpelx:inputProperty name="jca.file.TargetDirectory"
variable="destinationDirectory"/>
<bpelx:inputProperty name="jca.file.TargetFileName"
variable="inputFileName"/>
Pass approppriate values into the above given variables and try.
Hopefully it should work.
Let us know, how it goes !
<Puneet/>

Using Mac Word for Windows software using Parallels

Hello,
I'm using Parallels. I'm running a Windows program. The program has an export to Word function. I do not have Word on Windows, I just have MS Office on the Mac side. When I Export to Word in Windows, it says I need to have Word installed. Is there a way to have my Windows software utilize Word using Office for Mac?
Thanks!

Sorry, but no. Save the file on your Mac OS X volume if you have third-party software on Windows that enables you to write to a Mac drive. Or find out if you really need to have Word installed in order to export a file from your program to a Word compatible file.

How to use search help for UI parameters using 'as search pattren'?

i want to link a search help created by me to the UI parameters in a report using 'as a serarch pattern,but i am unable to proceed with it.how to proceed with it?

hi,
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm

How to use a photogate for frequency measurement using a NI USB-6211

Hello, I am extremely new to LabView and am having trouble using the counter feature (or if this is even what I should be doing). I am trying to use a photogate as a frequency counter when a voltage spike is created by blocking the sensor. This will then be put into RPM and used to evaluate a small motor dyno I am creating. If anyone has any help or previous vi's they dont mind sharing it would be greatly appreciated. The photogate specifications are for an optek opb930l55. Thanks

Configuring a counter input task will be a little different depending on the type of DAQ card that you are using to read the digital pulses. You just need to wire the voltage from the photogate to one of the counter pins on the card. Then follow one of the many examples for measuring the frequency of pulses. If your card allows it, I would suggest choosing the Counter Input >> Frequency measurement from the DAQmx Create Channel VI. If you have questions about how to do this with your specific DAQ device, please provide more information
Zach C.
Field Engineer
Greater Los Angeles

How to implement OData based BASIC Authentication using HTML, JavaScript for Mobile Apps using Apache Cordova/PhoneGap and datajs-1.1.1.js library

Hello,
I have an issue with OData based BASIC authentication for iOS App created using HTML, JavaScript, SAP UI5, OData and Apache Cordova/PhoneGap.
Please check the post here http://scn.sap.com/thread/3527245
Request you to kindly reply on the above given link.
Thanks and Regards,
Suraj Kumar

Hello Prathik,
The code which I am using for OData based BASIC Authentication, for my Mobile App is as below.
   var onSuccess = function(data) {
   alert("We are Through"); //Just to check that the OData request was sucessful
   var onError = function(err) {
   switch(err.response.statusCode) {
   case 403 : {
   window.alert("Error Code - 403, Service unreachable ");
   break;
   case 401 : {
   window.alert("The credentials are incorrect or missing!");
   break;
// dataUserName and dataPassword are the two variables, in which I am storing my Username and Password, respectively.
   var connectionRequest = {
   requestUri: "ODATA SERVICE URL GOES HERE/",
   headers: { Authorization : 'Basic ' + Base64.encode(dataUsername + ":" + dataPassword) },
   method: "POST"
   OData.request( connectionRequest, onSuccess, onError);

Can I use Interpreted Mode for OTA distribution using an Enterprise In-House certificate?

It seems due to an issue with duplicate SWFs, that I can only get my .ipa to package using Interpreted Mode (not AOT).
This, of course, has been working fine using development provisioning and has tested fine using an enterprise distribution provisioning and certificate.
The client will be distributing the .ipa to in-house staff using over-the-air (this will NOT be an Apple Store item). I haven't seen anything saying one way or another whether there are any requirements, such as that the .ipa be compiled AOT.
Could someone please confirm, or point me to the appropriate references? I don't want to discover this hiccup once the final .ipa has been released to the client and they attempt to distribute to their staff.

You can use anything that you want with Enterprise certificates and you can break the rules. But only for Enterprise in-house distributuion.

Can we relink the executables for a particular schema using adadmin utility

Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.
Thanks,
Vijay

Hi,
Is it possible to do the following tasks for a particular schema (say inv):
1. Relink the executables for INV schema using adadmin utility.
2. Regenerate the forms for INV schema using adadmin utility.Yes, it is possible for specific schema -- See (Note: 141118.1 - How To Relink Forms Library Files Using Adadmin) for details.
3. Check if there are any invalid objects in the database where the issue is replicated INV schema.Through adadmin, it is not possible for specific schema. To check the list of invalid objects under the INV schema, you need to run this query:
SQL> select object_name, object_type
from dba_objects
where status = 'INVALID' and owner = 'INV';Regards,
Hussein

Error while instaling the MEP server for Single tier, using Oracle 10g DB

createDatabaseTables:
getAppServer:
============================================================
Sun Java System Mobile Enterprise Platform
============================================================
checkAppServer:
defaultDomainExists:
checkDefaultDomain:
Found "domain1", do you want to delete it? [y/n]
y
shouldDeleteDefaultDomain:
deleteDefaultDomain:
The domain (domain1) isn't running.
Domain domain1 deleted.
setup:
getDomainProperties:
Enter the name for the new Application Server domain (default: mep)
mep
Enter the Admin Port for the new domain [mep] (default: 4848)
Enter the HTTP Port for the new domain [mep] (default: 8080)
Enter the HTTPS Port for the new domain [mep] (default: 8181)
Enter the admin password for the new domain (default: adminpass)
remoba123
installGateway:
init:
getDomainProperties:
createDomain:
Using port 4848 for Admin.
Using port 8080 for HTTP Instance.
Using default port 7676 for JMS.
Using default port 3700 for IIOP.
Using default port 8181 for HTTP_SSL.
Using default port 3820 for IIOP_SSL.
Using default port 3920 for IIOP_MUTUALAUTH.
Using default port 8686 for JMX_ADMIN.
Domain being created with profile:developer, as specified by variable AS_ADMIN_P
ROFILE in configuration file.
Security Store uses: JKS
Domain mep created.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
init:
configureDomain:
Copying files to installation directory ...
Copying 53 files to F:\Sun\AppServer\domains\mep\ds
Copying 101 files to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\classes\META-INF
init:
copyOracleJar:
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
Copying 1 file to F:\Sun\AppServer\domains\mep\lib\ext
server.java-config.classpath-suffix = F:\Sun\AppServer/domains/mep/ds/skin/user/
messages/i18n;F:\Sun\AppServer/domains/mep/ds/skin/admin/messages/i18n
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jvm-options executed successfully.
Command create-jms-resource executed successfully.
Command create-jmsdest executed successfully.
Command create-jms-resource executed successfully.
configure:
configureMySQL:
configureOracle:
Command create-jdbc-connection-pool executed successfully.
Command create-jdbc-connection-pool executed successfully.
server.resources.jdbc-connection-pool.musicdb_jdbc_pool_oracle.match-connections
= true
configureRealm:
Command create-jdbc-resource executed successfully.
Command create-jdbc-resource executed successfully.
Command create-auth-realm executed successfully.
deployEAR:
stopDomain:
Domain mep stopped.
startDomain:
Attempting to start domain...
Waiting for domain to finish initializing
Waiting for status to be: mep running
Still waiting for status to be: mep running
Command deploy executed successfully with following warning messages: WARNING:
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
installJCAconnectors:
stopDomain:
Domain mep stopped.
Aug 22, 2008 8:22:55 PM com.sun.jbi.installer.JBICoreInstaller main
INFO: OpenESB JBI Core Components successfully installed in F:\Sun\AppServer\jbi

The error suggests that the oracle gwdb database was incorrectly created with the wrong username and password for the database. The installation expects the gwdb database to be created with the username of "gwdbuser" and password of "gwdbpass". I would check the login credentials for this database. Also the installation expects the musicdb database to be created with the username of "musicdbuser" and password "musicdbpass". You may want to check this as well.
JDO76611: Cannot connect to database via JNDI name 'jdbc/gw': java.sql.SQLExcept
ion: Connection could not be allocated because: ORA-01017: invalid username/pass
word; logon denied.
Alan Frechette
Sun MEP SQA Engineer

I am considering using I Pad for a presentation and want to use it in a wireless environment and though a projector not a TV monitor. Can I use Apple TV and apple wireless base,

I am considering using I PAD for a presentation using a projector. How can this be done. will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV and to projector. So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.

Kenabsalom wrote:
I am considering using I PAD for a presentation using a projector. How can this be done. will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV and to projector. So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.
It can use Apple Tv, but will require a wireless network as well. The Apple TV has an HDMI output, and depending on the projector it may connect directly to it through HDMI.
There are adpaters out there that will convert from HDMI to several other types such as VGA or Composite oir RGB. It would not be directly an Apple product as it would work with the HDMI cable rather than the apple TV or iPad directly.
Basically your setup should be:
iPad -> Wifi Network -> Apple TV-- HDMI Cable-->Adapter---->Projector
If the iPad is iPad 2 or above you can mirror the entire display to the projector through the apple Tv.
The Adapter would be something like this for instance:
http://www.amazon.com/Sanoxy-HDMI-Composite-S-Video-Converter/dp/B0047PDBP0
Or this:
http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC
With that said there are projectors that can be used wirelessly from the ipad without the need for Apple Tv or any adapter.
Epson makes one and a proprietary App to use it.
https://itunes.apple.com/us/app/epson-iprojection/id488048021?mt=8

I am looking for educational posters from Apple or for Garageband, if they exist. I'll be teaching a new class for middle school using Garageband next year. Thanks!

I am looking for educational posters from Apple or for Garageband, if they exist. My school district will be teaching a new class for middle school using Garageband next year. I'd love to make the rooms look awesome! Can anyone hook me up? Thanks!

lucky14life wrote:
first i was wondering what everyone thinks about macbooks compared to let's say another pc like hp,dell,etc.... i have been told that i'd have to be dumb to get a machine with windows vista on it,so that is why i have turned my focus to a macbook because i have heard they are pretty good and worth it...
I personally like my MacBook better than any other computer I have ever owned. I like being able to use windows when I need to but not being tied to it. My wife bought an HP with Vista and it doesn't seem to bad. Lots of updates at least one a week. Mostly graphic card drivers update.
also is it true that if you upgrade let's say the memory,hard drive,etc it won't be covered in the warranty/apple care plan??
Only two things you can upgrade on a MacBook is the Hard drive and Memory. It will not void the warranty. This is apples word on it. DIY Warranty Info
I would just like to ask for people's opinions please on purchasing one of these i am currently a senior in college and will be using it next year for grad school,need to replace the one i currently have...
Be sure you can live with the graphics. If you do a lot of graphics work you might want to consider the MacBook Pro. I use my MacBook for video editing using Final Cut Express HD and it works well. The MB is also not very good for gaming if you are into that. The integrated chip set doesn't work well with 3D games.
also any other ideas on getting iwork or office, a hard plastic case or a skin,thanks alot for anyone's input it is greatly appreciated.... i am looking to get one once leopard comes out thanks!!
Depending on your school may be a factor in what you choose. I use iWork and it is pretty good. You could also try NeoOffice or Open Office. They are good also. Office is supposed to be coming out with a new Mac version but not sure yet how it will work.
Be sure to ask for the student discount when you purchase the computer and software. It adds up.

Using command tab for application switcher no long cycles through all apps

Using command tab for application switcher use to work as it always has before Lion, and did in Lion for a few days. Now it stops at the last app. It always use to keep cycling through through all the apps. I figure I did something, but cannot figure out what. I have tried old tricks like force quitting dock using Activity Monitor, but that didnt work. Tried restarting, repairing permissions, and a new user account. I will great appreciate anyones help with this.
Thanks,
Mark C.

I was going to post my experience about application switcher as well, but i have the opposite problem: in SL it never worked, but now in Lion it does. Since I upgraded by installing over Lion, I'm assuming there must be a setting somewhere for this behavior. There is a place for setting keyboard keystrokes, looking there may help.

Calibration Executive with Fluke 5502A Calibrator

I have the following software/instruments:
Windows XP
Calibration Executive 3.5
NI-DMM 3.1
Fluke 5502A Calibrator
A variety of NI DMMs
What I want to do:
Calibrate my NI DMMs using Calibration Executive and the Fluke 5502A Calibrator in automated mode (i.e. not manual mode where the user is prompted to configure each calibrator setpoint)
The problem I'm encountering:
Calibration Executive 3.5 is written such that the Fluke 5500A, 5700A, 5520A, and 5720A are the selectable calibrators (in addition to "Enter Unsupported Instrument" which sends you to manual mode). Within the normal LabVIEW environment, the Fluke 5502A is capable of operating via the same instrument drivers that are available for the Fluke 5500A, if one tells the init VIs to ignore the fact that the 5502A does not return "5500" for it's *IDN? query. However, the same is not true of the Calexec environment (yet). If I select the 5500A as my calibrator within Calexec (when I've actually got the 5502A), I get initialization errors. I need Calibration Executive to accept the 5502A as a "member of the family". Unfortunately the 5502A is not capable of doing a 5500A emulation mode, per feedback from Fluke.

Just a followup to provide Fluke's documentation about the 5502A: http://support.fluke.com/calibration-sales/Download/Asset/9010582_ENG_A_W.PDF
Within the FAQ section of this document:
Does the 5502A use same the commands of other Fluke 55XX calibrators? Yes the 5502A uses
the same remote control commands as the earlier 5500A, 5520A and 5522A series calibrators. The
only difference is that it answers the remote ID command with a response of being a 5502A.

Using Calibration Executive for PXI-5610 using PXI-5124

Similar Messages

Maybe you are looking for