Using canon 700d dslr, and after every 3 to 4 shots, it gives black images

using canon 700d dslr, and after every 3 to 4 shots, it gives black images 

ahsankhan95 wrote:
i am shooting it on single shooting mode 
There are hints of an image in what you posted. It just appears to be massively underexposed. So I'll stick with my previous guess. The fact that you're using single shooting mode is irrelevant. You can push the button fast enough to overheat the flash if it's firing at full power. And it probably is, since no other light source appears to be active.
Bob
Boston, Massachusetts USA

Similar Messages

  • I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize, delete, duplicate and move up/ down ability.

    I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
    For this reason I cannot build new pages by copying one page to create another.
    I have a third style sheet that I use for the navigation styles  and h1 -h6 ect. tags. and I am also using a css drop menu, can one of these be the problem?
    The css menu I am using has the following script - I goes at the bottom of the html page. Before the closing body tag,
    <script>
    $(function () {
      $("#nav").tinyNav();
    </script>
    I am also using the following for image control - I place it towards the top of the fluid
    grid style sheet.
        box-sizing: border-box; /* Opera/IE 8+ */
        -moz-box-sizing: border-box; /* Firefox, other Gecko */
        -webkit-box-sizing: border-box; /* Safari/Chrome, other WebKit */
    Can some one please help.

    I am using Dreamweaver cc 2014 and after applying css styles to my fluid grid layout I lose the resize,delete, duplicate an move up/ down ability.
    This implies there is something broken in your FluidGrid Layout CSS file.   It  could be something simple like a missing semi-colon or curly bracket.   Run your code through the W3C validation tools below to check for errors.  NOTE:  ignore reported errors in boilerplate.css
    CSS - http://jigsaw.w3.org/css-validator/
    HTML - http://validator.w3.org/
    Nancy O.

  • HT3275 Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD!

    Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?

    Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?

  • HT3964 my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually s

    my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually started and I have the dashboard appear but then the screen freezes 

    Since you have Lion v10.7.4 installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

  • When using the move tool and or crop tool my whole screen goes black

    When using the move tool and or crop tool my whole screen goes black  and reappears when I go to another tool??? 

    Hi 25Z4P,
    Could you please take a screenshot of the problem you're encountering. I'm sure it is a black screen like you're describing, but it would be helpful to assess what is happening.
    Thank you.

  • Just updated to 6.0 and I'm noticing random white pixels on black images.

    Just updated to 6.0 and I'm noticing random white pixels on black images. It's not my monitor since this doesn't happen to any other browsers. It might also be a plugin.

    Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    * https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Update All your Firefox Plugins
    * https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    * http://www.mozilla.com/en-US/plugincheck/
    Troubleshooting plugins
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
    Check and tell if its working.

  • How to Import .MOV files in Adobe After Effects, I am Using Canon 700d for FilmShooting

    Hello,
    I have Just brought a canon 700d and started Shooting HD Movies but now i want to add some effects in my video E.G. Twixtor effect for slow motion but I am facing a problem that i cannot import .MOV file in Adobe AE CS4. Please help me. Also If you can tell me any free converter for .MOV to AF file format.
    I am using Windows 8 OS.
    Thanks!

    CS4 is much older than Windows 8. CS4 is meant to work on XP or Vista. Getting it to run on Windows 7 was a bit of an issue, so I'm pleasantly surprised to hear that you have CS4 running on Windows 8 at all.
    It's also possible that a new camera records in a codec that such an old version of AE doesn't understand.
    Make sure you're running the latest update to your version of AE. You're on version 9, so make sure you've run the Adobe After Effects CS4 9.0.3 Update (I would not suggest updating in the middle of a project though, as any changes might break AE). I would like to reiterate: you're running a version that was released six years ago on an operating system that was released much more recently. So, be careful how you tread. However, if you're not running 9.0.3, you're missing some bug fix updates that might solve your problem.
    I would suggest upgrading to a newer version of AE.
    That being said, as Dave mentions, CS4 and earlier had lots of trouble with MPEG-4 and other codecs that used interframe compression. Can you open the files in your version of Premiere? If so, you can use Premiere or the Adobe Media Encoder to convert to a proper intermediate codec. MOV is just a container format. QuickTime with the PNG codec will work in After Effects CS4 with no problems as will the other codecs Dave mentions.

  • Problems with using Canon LiDE 210 and OSX 10.7.4

    I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

    Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
    Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
    http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
    http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
    I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
    Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
    At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
    So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
    I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
    Does anyone have any experience of this issue, does anyone know how I might resolve it?
    Many thanks,
    Jeff

  • How to use Time Machine before and after installing a new hard drive

    So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

    wjosten wrote:
    Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
    Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk.  However, whenever I swap out a disk I do exactly what you do.  CCC to get the ol drive onto a new one.  Test by starting up to the new (but still external drive).  Then replace the internal drive.
    I usually just sell the old drive on eBay.  My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me.  The price of large external drives is almost the same as smaller internal ones.

  • X-Windows fails after Every Major Upgrade: About to give up Archlinux

    I have resigned myself to this behavior.  I need to get Nvidia cuda toolkit working and after a major upgrade that effects X-windows I lose X.
    Usually my fix is to reinstall nvidia drivers and cuda, sometimes successfully from aur but usually not.  Well this time I'm stuck.
    The proprietary driver won't work either,  it wants kernel sources,  but after installing them it still can't find them.  Maybe they are there and I just need to supply some command line arguments,  but I grow weary of this.
    I just can no longer afford to waste hours and hours configuring low level BS to get my work done.
    I'm going to step away from my console now and get some needed real work done. Does anyone want to talk me out of this?  I'll probably blow away archlinux and replace it with ubuntu or maybe scientific linux if this persists.
    I really wish Arch spent a little bit more time making sure that they would support drivers for the major vendors,  e.g. AMD and Nvidia.  Nvidia's cuda drivers really have problems with some of the latest stuff.  Perhaps it's just a bad match and I should another distro. Not sure.  Thoughts?

    ewaller wrote:
    I don't use Nvidia, so I cannot share your pain.  I can say that all OSes require some level of maintenance.  Some require it continuously.  Others less so.  Some require little for long periods, followed by re-installs.   It seems the more control you have, the more effort is required.  Some are walled gardens, some are driven by marketing departments, some by ideology.
    For me, Arch is the compromise I need.  A great deal of control.  Never a need to start over from scratch.  It does what I want, and I don't have to compile it from scratch.  Were it not for Arch, I'd still be with Gentoo (the penultimate disto, IMHO)
    Regardless, it is your system.  YMMV.
    Yes I liked the control Arch gave me and I liked the fact they were the first to get the latest stuff.  I fully understand that this has consequences.  Nvidia has to maintain support for their windows and probably MAC drivers first.  So they are always a distro rev or two behind in their linux support.  I'm surprised there isn't more whining about Nvidia support.  Maybe my configuration is a little odd, and it's just working for most,  but my gpu, motherboard and cpu are fairly standard,  though possibly dated by a year or two.
    Well I'm going to give it one more try before punting.  I'll do some reading on how to install nvidia drivers first and see if I can make any progress.
    Thanks for the input.

  • Having trouble with using variables in functions and after functions..

    Morning,
    I have simplified this, as it represents the core of what’s I obviously don't know how to do. 
    Problem:
    Say I populate that variable by reading in a list if IP addresses from file, finding the line that matches the hostname and place that string into the $IPAddress variable for use later throughout the script.   I did not run into a significant problem
    until I decided to convert the routine of looking up the IP address and populating the variable into a function.   As soon as I made it a function, and called that function, the $IPAddress variable only had the data in it until the function completed. 
    Once the function had done its work, and had placed the data into the variable, I expected that “new” data to be available after the function had completed..in that variable.  But it’s like the $IPAddress variable in the main script is a totally
    different data then the variable with the same name that’s used within the function. 
    So I think this demonstrates some of what’s kicking my butt.. 
    $IPAddress = "This is the wrong data”
    Function TestFunction () 
    $IPAddress  #call to display the contents of the variable at the start of the function. 
    $IPAddress = Read-Host -Prompt "Please enter the text ‘Goober’" 
    $IPAddress   #call to display the contents of the variable at the end of the function. 
    TestFunction
    $IPAddress ​
    The output I get is: 
    This is the wrong data
    "Please enter ‘Goober’"  : where I enter Goober
    Goober
    This is the wrong data
    Huh? 
    I had expected:
    This is the wrong data
    "Please enter ‘Goober’"  : where I enter Goober
    Goober
    Goober
    What good is the repeatability of a function if it’s output is lost? 

    THis seems to work.. IS there any reason NOT to do this?
    $Global:IPAddress= "This is the wrong data” #"
    Function TestFunction{
        Write-Host $IPAddress-fore green
          $host.ui.RawUI.FlushInputBuffer()
         $Global:IPAddress =
    Read-Host -Prompt
    "Please enter the text ‘Goober’"
        return$Global:IPAddress
    TestFunction
    return$Global:IPAddress

  • HT4059 I use the bookmark option and after  I close the iPad it opens up on the first bookmark I used

    I read on my iBook, I mark a bookmark, when I close my iPad, after I come back, it opens up at my first bookmark I used.

    I'm not sure if I am having the same problem or just a similar problem.    Lately when I open a book in iBooks it automatically opens not to the page where the bookmark is, but so e earlier page.   Not certain if it is opening to a random page or a previously bookmarked page.
    It happens on my iPad 2, iOS 6.0.1. In Settings sync Bookmarks is set to "on" and I use iCloud to sync devices as well as plugging in to iTunes on my Mac almost  daily to make back ups.   I don't tend to open iBooks on my iPhone 4S, but it is set to sync anyway.

  • I just bought 2 mini ipads for daughers plus my ipad we use same apple id and now every time i download an app in one of the mini ipad it will download in my ipad 2 and in the other mini ipad what can i do to stop this?.

    Help me i just bouth 2 mini ipads and now everythig my daugher download in one mini is downloading in the other and in my ipad 2 we have the same apple id for the 3 ipads

    Do two things:
    1.  In Settings > iTunes & App Stores, turn off automatic downloads for Apps.
    2.  Assuming you sync using iTunes, turn off the automatic app syncing on the App tab when you have the iPads connected that should not receive the downloads.

  • HT1338 I reinstall myac pro and after every thing it's will be freeze in apple logo with processing bar and after 2-3 min my laptop shut down

    How to past the Singh of apple after install the. Mac pro cd

    We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
    #Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
    #Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
    Thank you for your cooperation!
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

  • Hi, I have a Canon Pixma ix6550 and it will not now print a proper black in the photo mode.

    It used to print ok but now the blacks take on a blue tint and do not look at all like the previous ones. I found that if I print in 'normal' mode, it will give me prints that look like the old ones.
    Can anybody help me get back to the good photo printing.
    Jo

    Further to this I have tried printing just a solid black box. It prints a nasty blue color. I have created one box in PS6 on a windows 8 machine and another on an XP with PS5 and they both produce the same nasty blue colour, I have changed printing heads, re-installed printer driver. If I do not use the photo print option but use standard printing, the black prints ok.
    Please does anybody have any ideas as this is driving me bonkers.

Maybe you are looking for