Using CASE statement in Procedure, SYS_REFCURSOR as OUT parameter
Hi all,
What is the mistake in this procedure
create or replace procedure ConditionalSelect( param1 number, refCur IN OUT SYS_REFCURSOR ) is
begin
case
when param1 = 1 then open refCur for select * from AA;
when param1 = 2 then open refCur for select * from EMPLOYEE;
end;
end;
The error i am getting is
Error
[row:1,col:1] ORA-24344: success with compilation error
[row:8,col:5] PLS-00103: Encountered the symbol ";" when expecting one of the following:
case
The symbol "case" was substituted for ";" to continue.
Thanks in advance
pal
a. you are missing an "end case;"
b. in select - use case only with end - in pl/sql you shulde use "end case"
like "end loop", "end if"
c. case is much more easy to read then a bunch of if's and else if's and else.
Amiel.
Similar Messages
-
Sql proposed to use case statement
Hi All
Can anyone help me here
This code works fine,here inthe inner sub queries(b,c,d,e,f),i am getting the weekly counts of usage data from the table mf_wer_OBI_USAGE_reqq.
As this is hitting same table with the similar set of queries so i was adviced to use case statement by taking the wk_1...5 in variable and making the query better
I am unable to figure out how to proceed.
Appreciate your help here.
Thanks
create table mf_wer_OBI_USAGE_reqq_WK
as select x.user_name id,x.mon MONTH_COUNT,x.wk_1 WEEK1_COUNT,x.wk_2 WEEK2_COUNT,x.wk_3 WEEK3_COUNT,x.wk_4 WEEK4_COUNT,x.wk_5 WEEK5_COUNT,x.subject_area_name,
y.EMP_FIRST_NAME FIRSTNAME,y.EMP_LAST_NAME SURNAME,y.E_MAIL_ADDRESS USER_MAILID,y.ouc OUC
from (select a.user_name,a.mon,a.subject_area_name,b.wk_1,c.wk_2,d.wk_3,e.wk_4,f.wk_5
from (select user_name,sum(count_us_st) mon,subject_area_name from mf_wer_OBI_USAGE_reqq group by user_name,subject_area_name) a,
(select user_name,sum(count_us_st) wk_1,subject_area_name from mf_wer_OBI_USAGE_reqq where extract(day from start_dt) between 1 and 7
group by user_name,subject_area_name) b,
(select user_name,sum(count_us_st) wk_2,subject_area_name from mf_wer_OBI_USAGE_reqq where extract(day from start_dt) between 8 and 14
group by user_name,subject_area_name) c,
(select user_name,sum(count_us_st) wk_3,subject_area_name from mf_wer_OBI_USAGE_reqq where extract(day from start_dt) between 15 and 21
group by user_name,subject_area_name) d,
(select user_name,sum(count_us_st) wk_4,subject_area_name from mf_wer_OBI_USAGE_reqq where extract(day from start_dt) between 22 and 28
group by user_name,subject_area_name) e,
(select user_name,sum(count_us_st) wk_5,subject_area_name from mf_wer_OBI_USAGE_reqq where extract(day from start_dt) between 29 and 31
group by user_name,subject_area_name) f
where a.user_name=b.user_name(+)
and a.subject_area_name=b.subject_area_name(+)
and a.user_name=c.user_name(+)
and a.subject_area_name=c.subject_area_name(+)
and a.user_name=d.user_name(+)
and a.subject_area_name=d.subject_area_name(+)
and a.user_name=e.user_name(+)
and a.subject_area_name=e.subject_area_name(+)
and a.user_name=f.user_name(+)
and a.subject_area_name=f.subject_area_name(+)) x,
dm_employee y
where x.user_name=y.id and
y.active_flg='Y';Swas_fly wrote:
This code works fineIf it's fine, why try to fix it?
Post your table (only the relevant columns as a CREATE TABLE statement) and some sample data (INSERT into) and your required output.
Post your code between these tags: -
Checking for the condition types using case statement
hi folks,
I have a lot of condition types that I have to check for and I am using case statement to do that. The code goes like this.
case wac-kschl.
when 'ZRAT' OR 'ZAGR' OR 'ZRCR' OR
'Y098' OR 'Y007' OR 'ZREW' OR 'Y106' OR 'ZTSR' OR 'Y127' OR 'Y125' OR 'Y126' OR 'Y124' OR 'Y157' OR 'Y092' OR 'Y085' OR 'Y090' OR 'ZMZD'
OR 'Y215' OR 'Y214' OR 'Y111' OR 'ZC$D' OR 'ZAUD'.
up till here it is working on errors and when I add few more condition types to the case statement it is throwing the error.
I have to check for all the condition types out here.
How can I correct it? Is there a better way to do it?
thanks
SanthoshHi Santhosh,
I think that your CASE statement has a flaw. The line length of one of the lines is too large. You need to insert a carriage-return to shorten it (or press the button 'Pretty Printer').
The code would look nicer like this:[code] CASE wac-kschl.
WHEN 'ZRAT' OR 'ZAGR' OR 'ZRCR' OR 'Y098' OR 'Y007' OR 'ZREW'
OR 'Y106' OR 'ZTSR' OR 'Y127' OR 'Y125' OR 'Y126' OR 'Y124'
OR 'Y157' OR 'Y092' OR 'Y085' OR 'Y090' OR 'ZMZD' OR 'Y215'
OR 'Y214' OR 'Y111' OR 'ZC$D' OR 'ZAUD' OR 'Z001' OR 'Z002'
OR 'Z003' OR 'Z004' OR 'Z005' OR 'Z006' OR 'Z007' OR 'Z008'
OR 'Z009' OR 'Z010' OR 'Z011' OR 'Z012' OR 'Z013' OR 'Z014'.
Do your thing here
WRITE: / 'OK'.
WHEN OTHERS.
WRITE: / 'NOT OK'.
ENDCASE.[/code]If this will not work for you, you could try a different approach:[code]* Local definition
DATA:
var_list(1024).
Build variable string for checking
CONCATENATE 'ZRAT ZAGR ZRCR Y098'
'Y007 ZREW Y106 ZTSR'
'Y127 Y125 Y126 Y124'
'Y157 Y092 Y085 Y090'
'ZMZD Y215 Y214 Y111'
'ZC$D ZAUD'
INTO var_list
SEPARATED BY space.
Check if the correct value is supplied
IF var_list CS wac-kschl.
Do your thing here
WRITE: / 'OK'.
ENDIF.[/code]Hope this helps you a bit.
Regards,
Rob. -
Can we use return statement in procedure?
Can we use return statement in procedure or we can use more than one return statement in procedure?
HamidHelal wrote:
NOReally? Did you at least test it? You can use RETURN in procedure or in anonymous PL/SQL block. The only restriction is you can't specify return value:
SQL> begin
2 dbms_output.put_line('Before return');
3 return;
4 dbms_output.put_line('After return');
5 end;
6 /
Before return
PL/SQL procedure successfully completed.
SQL> create or replace
2 procedure p1
3 is
4 begin
5 dbms_output.put_line('Before return');
6 return;
7 dbms_output.put_line('After return');
8 end;
9 /
Procedure created.
SQL> exec p1;
Before return
PL/SQL procedure successfully completed.
SQL> begin
2 dbms_output.put_line('Before return');
3 return 99;
4 dbms_output.put_line('After return');
5 end;
6 /
return 99;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00372: In a procedure, RETURN statement cannot contain an expression
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
SQL> create or replace
2 procedure p1
3 is
4 begin
5 dbms_output.put_line('Before return');
6 return 99;
7 dbms_output.put_line('After return');
8 end;
9 /
Warning: Procedure created with compilation errors.
SQL> show err
Errors for PROCEDURE P1:
LINE/COL ERROR
5/9 PL/SQL: Statement ignored
5/9 PLS-00372: In a procedure, RETURN statement cannot contain an
expression
SQL> SY. -
Need help in this sql query to use Case Statement
hi All,
I have the below query -
SELECT DISTINCT OFFC.PROV_ID
,OFFC.WK_DAY
,CASE
WHEN OFFC.WK_DAY ='MONDAY' THEN 1
WHEN OFFC.WK_DAY ='TUESDAY' THEN 2
WHEN OFFC.WK_DAY ='WEDNESDAY' THEN 3
WHEN OFFC.WK_DAY ='THURSDAY' THEN 4
WHEN OFFC.WK_DAY ='FRIDAY' THEN 5
WHEN OFFC.WK_DAY ='SATURDAY' THEN 6
WHEN OFFC.WK_DAY ='SUNDAY' THEN 7
END AS DOW
,OFFC.OFFC_OPENG_TIME
,OFFC.OFFC_CLSNG_TIME
FROM GGDD.PROV_OFFC_HR OFFC
WHERE OFFC.PROV_ID='0000600'
WITH UR;
this query is bringing results in 6 differnt rows with opening and closing time for each day separately. I want to generate the data in one row with each day having opening and closing time, so for 7 days, total 14 columns with opening and closing time. But i am not able to do that using case statement.
can somebody help me in achieving that.
thanks,
iamhereHi,
Welcome to the forum!
That's called a Pivot .
Instead of having 1CASE expression, have 14, one for the opening and one for the closing time each day, and do GROUP BY to combine them onto one row.
SELECT OFFC.PROV_ID
, MIN (CASE WHEN OFFC.WK_DAY ='MONDAY' THEN OFFC.OFFC_OPENG_TIME END) AS mon_opn
, MIN (CASE WHEN OFFC.WK_DAY ='MONDAY' THEN OFFC.OFFC_CLSNG_TIME END) AS mon_cls
, MIN (CASE WHEN OFFC.WK_DAY ='TUESDAY' THEN OFFC.OFFC_OPENG_TIME END) AS tue_opn
, MIN (CASE WHEN OFFC.WK_DAY ='TUESDAY' THEN OFFC.OFFC_CLSNG_TIME END) AS tue_cls
FROM GGDD.PROV_OFFC_HR OFFC
WHERE OFFC.PROV_ID = '0000600'
GROUP BY offc.prov_id
;This assumes there is (at most) only one row in the table for each distinct prov_id and weekday. If not, what do you want to do? Post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data.
The staement above works in Oracle 8.1 and up, but there's a better way (SELECT ... PIVOT) available in Oracle 11. What version are you using? (It's always a good idea to include this when you post a question.)
Edited by: Frank Kulash on Jan 6, 2011 8:22 PM -
Using case statement in merge when matched
Hi,
I want to use case statement in the when matched clause of merge statement to ensure that I update only those fields that are undated.
create table TEST1
NAME1 VARCHAR2(25),
NAME2 VARCHAR2(25),
ID NUMBER not null
create table TEST2
ID NUMBER not null,
ID2 NUMBER not null,
NAME1 VARCHAR2(25),
NAME2 VARCHAR2(25)
merge into test1 t1
using
test2 t2
ON (t1.id = t2.id)
when matched
then
case
when t1.name1 != t2.name1
then
update set t1.name1 != t2.name1
when t1.name2 != t2.name2
then
update set t1.name2 != t2.name2
else
null;
end
it does not work and raises invalid sql command. Any idea how can I do that?
Thanks.
Sajid
Edited by: 808255 on Nov 12, 2010 4:22 AMHi
In that case you would have to use multiple statements and you may as well just use UPDATE instead of MERGE. Also, are you sure that you aren't trying to to fix a problem that doesn't actually exist.
Think about where the execution time is going to come from...
I would be tempted to do 1 UPDATE like this...
UPDATE test1 t1
SET (t1.name1,
t1.name2) = (SELECT t2.name1,
t2.name2
FROM test2 t2
WHERE t1.id = t2.id
AND (t1.name1 != t2.name1
OR t1.name2 != t2.name2))If you get specific performance issue with this, then post an explain plan and trace and I'll have a look.
I don't this the cost of the update is going to be as great as you think.
Cheers
Ben -
How to use CASE statement in WDA
Hi All,
Can any one Please expain me ' How to use CASE statement in Web dynpro ABAP? '
Please give me an example also.
Thanks in Advance !Hi,
The usage of case statement in webdynpro is same as used in general ABAP.
Data: l_id type string.
l_id = wdevent->get_string( 'ID' ).
case l_id.
when 'BTN1'.
when 'BTN2'.
when 'OTHERS'.
endcase.
Regards,
Radhika. -
Query Tuning - using CASE statement in the WHERE clause - Duplicate Post
Duplicate Post by mistake.
Please check
Query Tuning - using CASE statement in the WHERE clause
Edited by: Chaitanya on Jun 9, 2011 2:45 AM
Edited by: Chaitanya on Jun 9, 2011 2:46 AMDuplicate Post by mistake.
Please check
Query Tuning - using CASE statement in the WHERE clause
Edited by: Chaitanya on Jun 9, 2011 2:45 AM
Edited by: Chaitanya on Jun 9, 2011 2:46 AM -
Hi
I have two tables
employee
empid empname empaddress valid
Employeedetails
empid empname manager
I would like to validate empname from both the tables using case statement and empid as join and update 'valid' column in employee table to y/n.
Please help me with the syntaxHi,
Depending on your requirements:
UPDATE employee e
SET valid = (
SELECT CASE
WHEN COUNT (*) = 0
THEN 'n'
ELSE 'y'
END
FROM employeedetails
WHERE empname = e.empname
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
If you're asking about a DML statement, such as UPDATE, the sample data will be the contents of the table(s) before the DML, and the results will be state of the changed table(s) when everything is finished.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002} -
Using Case statement instead of IF in formula fields
Hi,
Can I use Case statement instead of IF in formula fields?If yes,please specify the syntax.
regards,
sunithaHi Sunitha,
You can surely use case statement instead of the If statement. The syntax for the case statement is :
Select [1 To n]
Case "Condition a", "Condition b":
"c"
Case "Condition d","Condition e":
"f"
Default:
Hope this helps you!
Regards,
Anindita -
Can I use case statements in triggers?
I created this trigger, it works BUT I don't like those parentheses at the begining, I would like
to change those parentheses for case statements, well that is my question, can you use case statements in triggers, how you would translate the following in case statement?
FOR EACH ROW
WHEN ( (new.sgbstdn_levl_code = 'UG')
and
( (NEW. SGBSTDN_STST_CODE NOT IN ('GR','SA','AS','IS') )
OR
( (NEW. SGBSTDN_STST_CODE = 'IS' ) AND
(NEW. SGBSTDN_STYP_CODE IN ('N' , 'T' )) AND
(OLD. SGBSTDN_STST_CODE = 'AS' ) ) ) )
==================================================================================================
CREATE OR REPLACE TRIGGER CC_STUD_WITHDRAWAL
AFTER UPDATE OR INSERT ON SATURN . SGBSTDN
FOR EACH ROW
WHEN ( (new.sgbstdn_levl_code = 'UG')
and
( (NEW. SGBSTDN_STST_CODE NOT IN ('GR','SA','AS','IS') )
OR
( (NEW. SGBSTDN_STST_CODE = 'IS' ) AND
(NEW. SGBSTDN_STYP_CODE IN ('N' , 'T' )) AND
(OLD. SGBSTDN_STST_CODE = 'AS' ) ) ) )
DECLARE
v_params gokparm.t_parameterlist;
event_code gtveqnm.gtveqnm_code%TYPE;
firstname spriden.spriden_first_name%TYPE;
lastname spriden.spriden_last_name%TYPE;
middlename spriden.spriden_mi%TYPE;
id spriden.spriden_id%TYPE;
CURSOR get_stud_name IS
SELECT
spriden_id ,
spriden_last_name ,
spriden_first_name ,
spriden_mi
FROM
saturn.spriden
WHERE spriden_pidm = :NEW.SGBSTDN_PIDM
AND spriden_change_ind IS NULL;
BEGIN
IF goksyst . f_isSystemLinkEnabled ( 'WORKFLOW' ) THEN
event_code := SUBSTR ( gokevnt.F_CheckEvent ( 'WORKFLOW' ,'CC_STUDENT_WITHDRAW' ),1,20);
OPEN get_stud_name ;
FETCH get_stud_name INTO id , lastname , firstname , middlename ;
CLOSE get_stud_name ;
----pass parameters to the event
v_params ( 1 ).param_value := 'CC_STUDENT_WITHDRAW' ;
v_params ( 2 ).param_value := '' ;
v_params ( 3 ).param_value := 'Student Withdrawal:' || lastname || ',' || firstname || ' ' ||
middlename ;
v_params ( 4 ).param_value := :NEW.sgbstdn_pidm ;
v_params ( 5 ).param_value := id ;
v_params ( 6 ).param_value := lastname ;
v_params ( 7 ).param_value := firstname ;
v_params ( 8 ).param_value := middlename ;
v_params ( 9 ).param_value := :NEW.sgbstdn_term_code_eff ;
v_params ( 10 ).param_value := :NEW.SGBSTDN_STST_CODE ;
v_params ( 11 ).param_value := :NEW.SGBSTDN_STYP_CODE ;
gokparm.Send_Param_List ( event_code , v_Params );
END IF;
END;
/You could delete a fair number of extraneous parentheses.
CREATE OR REPLACE TRIGGER cc_stud_withdrawal
AFTER UPDATE OR INSERT
ON saturn.sgbstdn
FOR EACH ROW
WHEN NEW.sgbstdn_levl_code = 'UG'
AND ( NEW.sgbstdn_stst_code NOT IN ('GR', 'SA', 'AS', 'IS')
OR ( NEW.sgbstdn_stst_code = 'IS'
AND NEW.sgbstdn_styp_code IN ('N', 'T')
AND OLD.sgbstdn_stst_code = 'AS')) -
Conditional Filters using case statements
Hello,
I have a table view which displays Total Quota and Theatre Quota. Against the Total Quota, there are 2 values - Rollover Revenue and Theatre Revenue. Against the Theatre Quota, there is only Theatre Revenue.
What I want to accomplish is to display only the Rollover Revenue Aggregated Quarterly number whenever there is a Total Quota number and not display the Theatre Revenue number
In the table view,
Year Name Quarter Name Quarter Name Sort Person Region Quota Name Quarterly Quota Credit Amount QTD Attainment Credit Type Name
YEAR-2012 QTR-1-2012 QTR-1-2012 750 Total Quota 6,128,500 5,492,081 89.62% Rollover Revenue Aggregated Quarterly
750 6,128,500 5,344,000 87.20% Theatre Revenue
QTR-2-2012 QTR-2-2012 750 Total Quota 5,922,500 5,890,264 99.46% Rollover Revenue Aggregated Quarterly
750 5,922,500 6,120,000 103.33% Theatre Revenue
QTR-3-2012 QTR-3-2012 750 Total Quota 5,716,500 0 0.00%
QTR-4-2012 QTR-4-2012 750 Total Quota 5,510,500 0 0.00%
I used an example in the following link:
http://oraclebizint.wordpress.com/2008/02/06/oracle-bi-ee-101332-conditional-filters-using-case-statements-in-filters/
and applied the example in my scenario:
CASE WHEN Quota."Quota Name" = 'Total Quota' THEN "Credit Type"."Credit Type Name" ELSE 'Dummy' END != 'Theatre Revenue'
I still get duplicate rows.
Thanks.Could you suggest any solutions for this problem where I can conditionally hide the number only for a certain type of data and not for all type of data?
Thanks. -
Using case statement in OWB expression builder
Hi All,
We are using OWB version 10.2.0.1.0. While using the below case statement We are getting the validation message as 'The expression is not properly formed'.
Case statement used in expression builder:
case when (INGRP1.CHARGETYPE in ('O','F') or INGRP1.TARIFF_GROUP in ('SMSINT','MMSINT')or ( INGRP1.CALL_TYPE = '002' and INGRP1.TARIFF_GROUP = 'MTV'))
then
(select call_zone_reltn_key from call_zone_reltn where
call_zone_cd=substr(case
when substr( INGRP1.B_SUBNO,1,2)='00'
then
substr( INGRP1.B_SUBNO,3)
else substr( INGRP1.B_SUBNO,1)
end,1,length(call_zone_cd))and rownum=1)
else -1
end
Kindly help me out in fixing this error or suggest any alternate way to use the above query in OWB expression builder.
Thanks,
Kabilan946887 wrote:
Hi All,
We are using OWB version 10.2.0.1.0. While using the below case statement We are getting the validation message as 'The expression is not properly formed'.
Did you try to deploy the mapping ? Some time the expression validator gives wrong error messege.
Try to deploy the mapping and see if you are still getting this issue
Case statement used in expression builder:
case when (INGRP1.CHARGETYPE in ('O','F') or INGRP1.TARIFF_GROUP in ('SMSINT','MMSINT')or ( INGRP1.CALL_TYPE = '002' and INGRP1.TARIFF_GROUP = 'MTV'))
then
(select call_zone_reltn_key from call_zone_reltn where
call_zone_cd=substr(case
when substr( INGRP1.B_SUBNO,1,2)='00'
then
substr( INGRP1.B_SUBNO,3)
else substr( INGRP1.B_SUBNO,1)
end,1,length(call_zone_cd))and rownum=1)
else -1
end
Kindly help me out in fixing this error or suggest any alternate way to use the above query in OWB expression builder.
Thanks,
Kabilan -
Query Tuning - using CASE statement in the WHERE clause
Hi All,
My query has been modified to use a CASE statement in the WHERE clause to consider data from certain columns based on a parameter value. This modified query is doing a full table scan and running endlessly. Please suggest what may be done to improve its performance:
Query:
SELECT LAST_DAY(TRUNC(TO_TIMESTAMP(os.requestdatetime, 'yyyymmddhh24:mi:ss.ff4'))) AS summary_date,
os.acctnum,
os.avieworigin_refid,
COUNT(1) cnt_articleview,
SUM(NVL(autocompletedterm,0)) cnt_autocompletedterm
FROM TABLE1 os
WHERE os.acctnum IS NOT NULL
AND os.avieworigin_refid IS NOT NULL
AND os.requestdatetime IS NOT NULL
AND UPPER(os.success_ind) = 'S'
AND CASE WHEN
Param_ValueToCheck = 'FULL' AND get_date_timestamp(os.requestdatetime) BETWEEN
TO_DATE('01-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS') AND
TO_DATE('31-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
THEN 1
WHEN
Param_ValueToCheck = 'INCR' AND os.entry_createddate BETWEEN
TO_DATE('01-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS') AND
TO_DATE('31-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
THEN 1
END = 1
AND CASE WHEN
Param_ValueToCheck = 'FULL' AND os.entry_CreatedDate BETWEEN
TO_DATE('01-APR-2011 00:00:00','DD-MON-YYYY HH24:MI:SS') AND
TO_DATE('07-JUN-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
THEN 1
WHEN
Param_ValueToCheck = 'INCR' THEN 1
END = 1
GROUP BY LAST_DAY(TRUNC(TO_TIMESTAMP(os.requestdatetime, 'yyyymmddhh24:mi:ss.ff4'))), os.acctnum,os.avieworigin_refid;Table Description:
(Number of rows : approx > 600,000,000)
Name Null Type
ARTICLEID NOT NULL NUMBER(20)
USERKEY NUMBER(10)
AVIEWORIGIN_REFID VARCHAR2(10)
SUCCESS_IND VARCHAR2(2)
ENTRY_CREATEDDATE DATE
CREATED_BY VARCHAR2(10)
FILENUMBER NUMBER(10)
LINENUMBER NUMBER(10)
ACCTNUM VARCHAR2(10)
AUTOCOMPLETEDTERM NUMBER(2)
REQUESTDATETIME VARCHAR2(19)Explain Plan
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2224314832
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 590 | 33040 | 2501K (1)| 08:20:15 | | |
| 1 | HASH GROUP BY | | 590 | 33040 | 2501K (1)| 08:20:15 | | |
| 2 | PARTITION RANGE ALL| | 590 | 33040 | 2501K (1)| 08:20:15 | 1 |1048575|
|* 3 | TABLE ACCESS FULL | TABLE1 | 590 | 33040 | 2501K (1)| 08:20:15 | 1 |1048575|
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
3 - filter(UPPER("OS"."SUCCESS_IND")='S' AND CASE WHEN ('FULL'='FULL' AND
"OS"."ENTRY_CREATEDDATE">=TO_DATE(' 2011-04-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"OS"."ENTRY_CREATEDDATE"<=TO_DATE(' 2011-06-07 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) THEN 1 WHEN
'FULL'='INCR' THEN 1 END =1 AND "OS"."REQUESTDATETIME" IS NOT NULL AND CASE WHEN ('FULL'='FULL'
AND "ODS"."GET_DATE_TIMESTAMP"("REQUESTDATETIME")>=TO_DATE(' 2011-05-01 00:00:00', 'syyyy-mm-dd
hh24:mi:ss') AND "ODS"."GET_DATE_TIMESTAMP"("REQUESTDATETIME")<=TO_DATE(' 2011-05-31 00:00:00',
'syyyy-mm-dd hh24:mi:ss')) THEN 1 WHEN ('FULL'='INCR' AND "OS"."ENTRY_CREATEDDATE">=TO_DATE('
2011-05-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND "OS"."ENTRY_CREATEDDATE"<=TO_DATE('
PLAN_TABLE_OUTPUT
2011-05-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss')) THEN 1 END =1 AND "OS"."ACCTNUM" IS NOT NULL AND
"OS"."AVIEWORIGIN_REFID" IS NOT NULL)Edited by: Chaitanya on Jun 9, 2011 2:44 AM
Edited by: Chaitanya on Jun 9, 2011 2:47 AMHi Dom,
Modified Query:
SELECT LAST_DAY(TRUNC(TO_TIMESTAMP(os.requestdatetime, 'yyyymmddhh24:mi:ss.ff4'))) AS summary_date,
os.acctnum,
os.avieworigin_refid,
COUNT(1) cnt_articleview,
SUM(NVL(autocompletedterm,0)) cnt_autocompletedterm
FROM TABLE1 os
WHERE os.acctnum IS NOT NULL
AND os.avieworigin_refid IS NOT NULL
AND os.requestdatetime IS NOT NULL
AND UPPER(os.success_ind) = 'S'
AND (('FULL' = 'FULL'
AND (get_date_timestamp(os.requestdatetime) BETWEEN TO_DATE('01-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
AND TO_DATE('31-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
AND os.entry_CreatedDate BETWEEN TO_DATE('01-APR-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
AND TO_DATE('07-JUN-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
OR ('FULL' = 'INCR'
AND os.entry_createddate BETWEEN TO_DATE('01-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS')
AND TO_DATE('31-MAY-2011 00:00:00','DD-MON-YYYY HH24:MI:SS') ))
GROUP BY LAST_DAY(TRUNC(TO_TIMESTAMP(os.requestdatetime, 'yyyymmddhh24:mi:ss.ff4'))), os.acctnum,os.avieworigin_refid;Execute Plan:
PLAN_TABLE_OUTPUT
Plan hash value: 3615447714
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 25125 | 1374K| | 407K (1)| 01:21:36 | | |
| 1 | HASH GROUP BY | | 25125 | 1374K| 3768K| 407K (1)| 01:21:36 | | |
| 2 | PARTITION RANGE ITERATOR| | 25125 | 1374K| | 407K (1)| 01:21:32 | 29 | 31 |
|* 3 | TABLE ACCESS FULL | TABLE1 | 25125 | 1374K| | 407K (1)| 01:21:32 | 29 | 31 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
3 - filter("OS"."ENTRY_CREATEDDATE">=TO_DATE(' 2011-04-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
UPPER("OS"."SUCCESS_IND")='S' AND "OS"."REQUESTDATETIME" IS NOT NULL AND
"ODS"."GET_DATE_TIMESTAMP"("REQUESTDATETIME")>=TO_DATE(' 2011-05-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"ODS"."GET_DATE_TIMESTAMP"("REQUESTDATETIME")<=TO_DATE(' 2011-05-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss') AND
"OS"."ACCTNUM" IS NOT NULL AND "OS"."AVIEWORIGIN_REFID" IS NOT NULL AND "OS"."ENTRY_CREATEDDATE"<=TO_DATE('
2011-06-07 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))Edited by: Chaitanya on Jun 9, 2011 4:51 AM -
Need help in this query using Case Statement
I have the following query which is currently existing and I am adding few more conditions based on the new requirements which is based on a particular flag set as 1 or 0.
If it is set to 1 then I should use the old query as it is and if it is set to 0 then I should add the new conditions.
Basically when the flag is set to 0, I shouldnt be including some of the records that already exists and should include only new records. This is based on the plan_type_ids in (1,2,3,4).
Hence I am using the Case statement to check if the plan_type_id is in (1,2) then do a set of not exists and if the plan_type_id in (3,4) then do set of not exists.
But when I run this query it is giving me error. What am I doing wrong?
Is there any other simple way to combine all the not exists for all of those select statements as given after the line ------------------------- into a single one?
What am I doing wrong?
I tried putting the NOT EXists before the case too but that too didnt work.
Please help. Appreciate it.
Thank you in advance.
SELECT
ee.employee_id
,'WELCOMEMSG'
,DECODE( me.member_enrollment_id
,first_enr.enrollment_id
,20
,23
) status_id
,me.member_enrollment_id
,wk.welcome_msg_id
FROM wk
,employees ee
,MEMBER_ENROLLMENTS me
,plans pl
,( SELECT employee_id
,plan_type_id
,start_date
,plan_id
,MIN(MEMBER_ENROLLMENT_ID) member_enrollment_id
FROM ( SELECT me.employee_id
,DECODE(pl.plan_type_id,1,2,pl.plan_type_id) plan_type_id
,pl.start_date
,wk.plan_id
,me.member_enrollment_id
FROM wk
,PLANS pl
,MEMBER_ENROLLMENTS me
WHERE wk.done_by = nvl('TEST' ,wk.done_by)
AND wk.welcome_msg_name <> 'NONE'
AND pl.employer_id = wk.employer_id
AND wk.employer_id = 5
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id = NVL(wk.plan_id,pl.plan_id)
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date <> NVL(me.coverage_end_Date, me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date, me.coverage_effective_date + 1)
MINUS
SELECT me.employee_id
,DECODE(pl.plan_type_id,1,2,pl.plan_type_id) plan_type_id
,pl.start_date
,NULL plan_id
,me.member_enrollment_id
FROM wk
,PLANS pl
,MEMBER_ENROLLMENTS me
WHERE wk.done_by = nvl(NULL,wk.done_by)
AND wk.welcome_msg_name <> 'NONE'
AND pl.employer_id = wk.employer_id
AND wk.employer_id = 5
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id = wk.plan_id
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date <> NVL(me.coverage_end_Date, me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date, me.coverage_effective_date + 1)
WHERE employee_id = 100
GROUP BY employee_id ,plan_type_id,start_date ,plan_id
)first_enr
,MEMBER_EVENTS mv
WHERE wk.done_by = nvl(NULL,wk.done_by)
AND wk.employer_id = ee.employer_id
AND ee.employee_id = me.employee_id
AND ee.employee_id = 100
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date <> NVL(me.coverage_end_Date, me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date, me.coverage_effective_date + 1)
AND is_expired(me.employee_id,me.plan_id) = 'Y'
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id=nvl(wk.plan_id,pl.plan_id)
AND me.employee_id = first_enr.employee_id
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = first_enr.plan_type_id
AND pl.start_date = first_enr.start_date
AND me.member_enrollment_id = mv.member_enrollment_id (+)
AND 'WELCOMEMSG' = mv.event_name(+)
AND mv.member_enrollment_id IS NULL
AND wk.welcome_msg_name <> 'NONE'
AND NVL(first_enr.plan_id,0) = NVL( wk.plan_id,0)
AND (FN_get_all_participant(wk.employer_id) = 1
OR
(FN_get_all_participant(wk.employer_id) = 0
AND (CASE WHEN pl.plan_type_id IN (1,2)
THEN NOT EXISTS (SELECT 'X'
FROM member_accounts ma
member_enrollments men3
plans pl3
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = me.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date < pl.START_DATE
AND TRUNC(men3.coverage_effective_date) <> TRUNC(NVL(men3.coverage_end_date, men3.coverage_effective_date + 1 ))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id in (1, 2)
UNION
(SELECT 'X'
FROM member_accounts ma
member_enrollments men3
plans pl3
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = me.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date = (pl.start_date - 365)
\ AND TRUNC(men3.coverage_effective_date) <> TRUNC(NVL(men3.coverage_end_date, men3.coverage_effective_date + 1 ))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id = wk.plan_type_id
UNION
(SELECT 'X'
FROM member_accounts ma
member_enrollments men3
plans pl3
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = men2.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date < pl2.START_DATE -- '01-Jan-2011'
AND TRUNC(men3.coverage_effective_date) <> TRUNC(NVL(men3.coverage_end_date, men3.coverage_effective_date + 1 ))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id = 2
UNION
(SELECT 'X'
FROM member_accounts ma
member_enrollments men3
plans pl3
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = men2.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date < pl2.START_DATE -- '01-Jan-2011'
AND TRUNC(men3.coverage_effective_date) <> TRUNC(NVL(men3.coverage_end_date, men3.coverage_effective_date + 1 ))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id = 1
WHEN pl.plan_type_id IN (3, 4)
THEN NOT EXISTS (SELECT 'X'
FROM member_accounts ma
member_enrollments men3
plans pl3
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = men2.employee_id
AND nvl(ma.account_end_date, sysdate) <= trunc(sysdate)
AND ma.plan_id = pl3.plan_id
AND pl3.start_date <= pl2.START_DATE
AND TRUNC(men3.coverage_effective_date) <> TRUNC(NVL(men3.coverage_end_date, men3.coverage_effective_date + 1 ))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id in (3, 4)
END
AND (CASE WHEN pl.plan_type_id IN (1,2)
ERROR at line 89:
ORA-00936: missing expressionMaybe
SELECT ee.employee_id,
'WELCOMEMSG',
DECODE(me.member_enrollment_id,first_enr.enrollment_id,20,23) status_id,
me.member_enrollment_id,
wk.welcome_msg_id
FROM wk,
employees ee,
MEMBER_ENROLLMENTS me,
plans pl,
(SELECT employee_id,
plan_type_id,
start_date,
plan_id,
MIN(MEMBER_ENROLLMENT_ID) member_enrollment_id
FROM (SELECT me.employee_id,
DECODE(pl.plan_type_id,1,2,pl.plan_type_id) plan_type_id,
pl.start_date,
wk.plan_id,
me.member_enrollment_id
FROM wk,
PLANS pl,
MEMBER_ENROLLMENTS me
WHERE wk.done_by = nvl('TEST',wk.done_by) /* same as wk.done_by = 'TEST' */
AND wk.welcome_msg_name 'NONE'
AND pl.employer_id = wk.employer_id
AND wk.employer_id = 5
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id = NVL(wk.plan_id,pl.plan_id)
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date != NVL(me.coverage_end_Date,me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date,me.coverage_effective_date + 1)
MINUS
SELECT me.employee_id,
DECODE(pl.plan_type_id,1,2,pl.plan_type_id) plan_type_id,
pl.start_date,
NULL plan_id,
me.member_enrollment_id
FROM wk,
PLANS pl,
MEMBER_ENROLLMENTS me
WHERE wk.done_by = nvl(NULL,wk.done_by) /* same as 1 = 1 */
AND wk.welcome_msg_name 'NONE'
AND pl.employer_id = wk.employer_id
AND wk.employer_id = 5
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id = wk.plan_id
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date NVL(me.coverage_end_Date,me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date, me.coverage_effective_date + 1)
WHERE employee_id = 100
GROUP BY employee_id,
plan_type_id,
start_date,
plan_id
) first_enr,
MEMBER_EVENTS mv
WHERE wk.done_by = nvl(NULL,wk.done_by)
AND wk.employer_id = ee.employer_id
AND ee.employee_id = me.employee_id
AND ee.employee_id = 100
AND me.plan_id = pl.plan_id
AND me.coverage_effective_date != NVL(me.coverage_end_Date,me.coverage_effective_date + 1)
AND me.coverage_effective_Date BETWEEN wk.start_date AND NVL(wk.end_date, me.coverage_effective_date + 1)
AND is_expired(me.employee_id,me.plan_id) = 'Y'
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = wk.plan_type_id
AND pl.plan_id = nvl(wk.plan_id,pl.plan_id)
AND me.employee_id = first_enr.employee_id
AND DECODE(pl.plan_type_id,1,2,pl.plan_type_id) = first_enr.plan_type_id
AND pl.start_date = first_enr.start_date
AND me.member_enrollment_id = mv.member_enrollment_id(+)
AND 'WELCOMEMSG' = mv.event_name(+)
AND mv.member_enrollment_id IS NULL
AND wk.welcome_msg_name != 'NONE'
AND NVL(first_enr.plan_id,0) = NVL(wk.plan_id,0)
AND (
FN_get_all_participant(wk.employer_id) = 1
OR
(FN_get_all_participant(wk.employer_id) = 0
AND NOT EXISTS(SELECT 'X'
FROM member_accounts ma,
member_enrollments men3,
plans pl3,
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = me.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date < pl.START_DATE
AND TRUNC(men3.coverage_effective_date) != TRUNC(NVL(men3.coverage_end_date,men3.coverage_effective_date + 1))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id in (1,2)
and pl.plan_type_id IN (1,2)
UNION
SELECT 'X'
FROM member_accounts ma,
member_enrollments men3,
plans pl3,
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = me.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date = (pl.start_date - 365)
AND TRUNC(men3.coverage_effective_date) != TRUNC(NVL(men3.coverage_end_date,men3.coverage_effective_date + 1))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id = wk.plan_type_id
and pl.plan_type_id IN (1,2)
UNION
SELECT 'X'
FROM member_accounts ma,
member_enrollments men3,
plans pl3,
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = men2.employee_id
AND ma.plan_id = pl3.plan_id
AND pl3.start_date < pl2.START_DATE -- '01-Jan-2011'
AND TRUNC(men3.coverage_effective_date) != TRUNC(NVL(men3.coverage_end_date,men3.coverage_effective_date + 1))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id = (1,2)
and pl.plan_type_id IN (1,2)
UNION
SELECT 'X'
FROM member_accounts ma,
member_enrollments men3,
plans pl3,
plan_types pt3
WHERE ma.member_account_id = men3.member_account_id
AND ma.employee_id = men2.employee_id
AND trunc(nvl(ma.account_end_date,sysdate)) <= trunc(sysdate)
AND ma.plan_id = pl3.plan_id
AND pl3.start_date <= pl2.START_DATE
AND TRUNC(men3.coverage_effective_date) != TRUNC(NVL(men3.coverage_end_date,men3.coverage_effective_date + 1))
AND pl3.plan_type_id = pt3.plan_type_id
AND pt3.plan_type_id in (3,4)
and pl.plan_type_id IN (3,4)
)Regards
Etbin
Maybe you are looking for
-
[ASO Calculation] Weird behavior of calculation in ASO
Hi, I have a strange scenario in one of ASO cube (in 11.1.2.3 ) where calculation script (highlighted in orange below) written and run with POV set for all time periods results in expected values only for one period and for the rest results are not
-
CDI in Embedded EJBContainer not working
Hello, I am having really annoying problems with running the Embedded EJBContainer and CDI! Scenario: Using WLS 12.1.2 and trying to use Embedded EJBContainer for Unit-Tests. Running the embedded container fails with following exception: Caused by: j
-
Hi I am using a Window scrollTo() Method to go to the specified area in the ipad safari browser, but the top link is not working. When i click on the link nothing happens. Please help!! -Sandip
-
Pidgin Internet Messenger connection problem
hello, can someone help me configure my Pidgin Internet Messenger on my solaris 10 box. When I tried configure it , i have an error like could not establish connection with the server, HTTP proxy connection error 502 I am yahoo and msn account . Than
-
HT1498 Apple TV movie rental with iTunes credit, doesn't work
I have topped up my iTunes account, but when I tried to rent a movie directly through Apple TV, it asked me about credit card details and would not accept payment with credit from iTunes. Why? Can I rent a movie directly on Apple TV using my iTunes c