Using CCM Directory between two clusters

Hi all,
In our company we have two callmanager Clusters ( Site A 4.1.3 ; Site B 6.1 )
Before we did an Upgrade on the one site we could use the directory from the other side as well as our own, but since we did the update the users can only access their own Site directory an when they try to access the other directory the phone shows a 404.
I looked at the enterprise parameters but did not find a fault, did cisco change the method of accessing the directory between the two version?
Do I have to change settings in the URL or in the XML/ASP file?
kind regards
Christian

yes,
windows versions
http://hostname/CCMCIP/xmldirectory.asp
linux versions
http://hostname:8080/ccmcip/authenticate.jsp
HTH
java
if this helps, please rate

Similar Messages

TS2972 is it possible to use home sharing between two users on the same computer?

My wife and I have itunes accounts and want to be able to share music we have each bought on our accounts. We have tried setting up the home sharing on our PC but it doesn't show up on the screen. Can anyone please help?

"Is it possible to use home sharing between two users on the same computer?"
No. Home sharing is used to connect two running instances of iTunes across a network. When you switch users on the computer all applications running on the other profile are suspended.
You can however share your respective media folders so that they are visible in either profile and then copy over any content that you want, or you could create a single joint library which you use when either user is logged in.
tt2

How to use a context between two components at the runtime

Hi Experts,
My Web dynpro component is over the Generation limit (size of generated load is > 2 MB) so it always gets Warning when I active it. That why I have separated my application into two components and use the ViewContainerUIElement in order to show views of each other.
In the application, I use also the TimeTrigger to refresh pages, all views have a TimeTrigger and the DELAY property of TimeTriggers is bounden into the same context attribute. I use a component to set up (change) the value of context attribute that is mapped with the Delay property. I want to change the Delay value on a component and other component will understand the changing.
My problem is how I can use the same context attribute between components at the runtime?
Let give me your advice on this.
Many thanks,
Ken

Hi Ken,
You can use [external context mapping|https://cw.sdn.sap.com/cw/docs/DOC-27901] to share data between two or more components using context.
Thanks,
Duy

Using the difference between two shots to create an alpha channel

If I were to lock my camera down and first film a shot of a non-moving background (say, my living room), then take another shot of someone walking into the room and sitting on a sofa, could I use the difference between the two shots (the person walking and sitting) to create an alpha channel?
What settings in Motion would I use to get this?

If you really want to do it within Motion, try stacking the clean frame and the the frame with the moving person over each other. Then set the blend mode to Difference for the top clip. You can clean this up a bit with a blur and a threshold filter, but Difference mattes are often a bit iffy.
If anything the person is wearing matches the background, for instance, that will be transparent.
After you've created a black/white representation of the "difference", you can add your person clip again to a new group, ⌘-shift-m to add a mask, then drag your difference group into it and set the source to luminance...
make sense?
Patrick

How share directory between two Linux nodes?

Dears,,
I am trying to install Oracle RAC on two Linux nodes . . .
But i need to make directory shared between the both nodes
directory is /ocfs/clusterware
I need to make this directory shared between them
I mean , if create file in this directory in the first node , I must see it from the second node.
As example:
On first node:
[root@rac1 clusterware]# touch test
On second node:
[root@rac2 clusterware]# ll
Should find test file
How can i make this please?
Edited by: M o h a m m e d on Apr 29, 2010 3:44 AM
Edited by: M o h a m m e d on Apr 29, 2010 3:44 AM

Dear,,
I already followed steps located in the following link . . .
[http://www.docstoc.com/docs/4603014/Install-Oracle-RAC-10g-on-Oracle-Enterprise-Linux-Using-VMware-Server/]
and i created the following in my lap top drive J:\
J:\RAC Virtual Machine\RAC\RAC 1
J:\RAC Virtual Machine\RAC\RAC 2
and J:\RAC Virtual Machine\RAC\Shared Storage
that contain the following:
asmdisk1.vmdk , asmdisk1-flat.vmdk , asmdisk2.vmdk , asmdisk2-flat.vmdk ,
asmdisk3.vmdk , asmdisk3-flat.vmdk , ocfs2disk.vmdk , ocfs2disk-flat.vmdk
I executed the following command in RAC 1
*[root@rac1 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs*
Succeded
But in RAC 2
*[root@rac2 ~]#mount -t ocfs2 -o datavolume,nointr /dev/sdb1 /ocfs*
ocfs2_hb_ctl: OCFS2 directory corrupted while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not per mitted"
How solve this please ?

Cannot use File Sharing Between Two Macs Running tiger

I have a G3 Desktop and a Platinum powerbook connected wirelessly using an Airport Extreme. I used to be able to easily share files between the two Macs but since upgrading to Tiger on both machines and loading the latest software upgrades and Airport firmware, running Disk Utility, setting preferences to turn on AppleTalk and file sharing, file sharing does not work. It worked one time after downloading the new Airport firmware but now I cannot find the other computer on the Airport network. There are only two computers on the Airport network. Does anybody have any ideas?

Problem solved by reading the reply to dkolenda's post earlier today. I turned off UDP traffic blocking inthe firewall settings and now both computers can see each other and share files.
Thanks!

I want to use I face between two ipads with the same email address

I have two ipads and special circumstances dictate using the same email address for both is this possible somehow?

Also, See here for,
Using FaceTime
http://support.apple.com/kb/ht4319

Use query string between two custom New Form

Hi guys,
i have a New Form . In this form i have a button that open(onClick) another list form (it is a different list). I have to pass a field value from the first form to the other . How can i do this using query string?Help please!
Thank you!

To pass some value with query string, you just need to open the form url with the querystring parameters (jquery needed):
var url = '<yourlist>/newform.aspx?parameter1=' + $('input[Title="Title"]').val()
SP.UI.ModalDialog.ShowPopupDialog(url)
on the second newform.aspx, you can grab the querystring parameters with the Sharepoint native function "_spGetQueryParam('<lower case query key>')"
var x = _spGetQueryParam("parameter1")
Note: make sure you use the key as lowercase, even you if pass it with chars in uppercase.

Shared Corporate directory between clusters

Hello All,
Is it possible to share a single corporate directory between two clusters, without using a 3rd party software or external server ?
Cluster A is 8.0(3) and Cluster B is 8.6(2). I have a working intercluster trunk at this time, all 1xxx DN are on cluster B and all the 2-9xxx are on cluster A.

Hello!
There is no way to configure shared directory without using 3rd party software (AD as example).
You can try to configure to use corporate directory from one cluster from another.
Regards,
Kirill

How can I get an ampersand to show up when between two other letters, in a text variable?

Using Indesign CC 2014, on Windows 7.
Creating a catalog.
The company name is used throughout.
Since this catalog will be re-branded for distributors at random, the company name will change all the time.
So, here's a text variable I'm defining:
The issue is that when I attempt to use an ampersand (&) between two letter with no spaces, the ampersand disappears.

Yes!! You got it!
Works. Thank you!
Wish I'd thought of that . . .

Access Restriction - Internet Connection Policy (between two times)

I want to say something about the Access Restriction.
I set the policy for allow internet connection for one of my LAN PC's. For example, I set the policy to ALLOW internet connection EVERY DAY from 8:00PM to 10:00PM. Starting with 10M internet connection stops. BUT, after a few minutes I do a power circle (turn OFF and turn ON the router) and I have internet connection again. For me, allowing internet connection from 8:00 PM to 10:00 PM means to have internet connection ONLY BETWEEN THIS HOURS, not before and not after.
In my opinion, this is the same situation with two DENY policies for internet connection, one from 12:00 AM to 8:00 PM and other from 10:00 PM to 11:55 PM (for the same PC, of course).
Why POWER CIRCLE broken this policies ?
ps - sorry for my English.

@sunwatcher,
If I set a policy for my little boy PCs ... for allowing internet connection from 4:00PM to 6:00PM (for example) ... after 6:00 PM internet connection stops and he turn OFF and turn ON the router (power circle) and after that he have internet connection, from then for a long time ...
I am from Romania, and I set time zone on GMT +2 (Bucharest time zone)
I insist with this problem because I want for him to use internet only between two times. Outside this time frame I want him to do their homework.

Campaign between two Times

Hi,
i created a campaign (WLP 8.1 sp4) with two different scenarios. i am using the events
"between two different times"
to display each scenario in different timings.
eg: scenario1 : from 09:00:00AM to 11:00:00AM
scenario2 : from 12:00:00PM to 04:00:00PM
but when i see the results in the browser its showing only the Scenario1. scenario2 is not triggering within the timeline i mentioned.
how to solve this.
pls let me know.
Thanks,
Natesh.
Edited by natesh at 06/25/2007 8:17 PM

I got the solution hope it help others
first u read as a String from database then
String processStartTime ="2007-04-25 09:57:46.0";
String processEndTime= "2007-05-25 09:57:46.0";
//converting string to date datatype
String start = processStartTime;
SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.sss");
Date dt = sdf.parse(start);
sdf.applyPattern("yyyy-MM-dd HH:mm:ss.SSS");
Date dt2 = sdf.parse(start);
//and converting for end time
String end= processEndTime;
SimpleDateFormat sdfe = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss.sss");
Date dte= sdfe.parse(end);
sdfe.applyPattern("yyyy-MM-dd HH:mm:ss.SSS");
Date dt2e = sdfe.parse(end);
long difference=dt2e.getTime()-dt2.getTime();
//we get difference in milliseconds so
System.out.println("The difference is "+difference/(1000*60*60));
//divde by 1000 to get in seconds,60-minutes,60-hours,24-for days
// or for difference
long hours, minutes, seconds,timeInSeconds;
long dif=dt2e.getTime()-dt2.getTime();
dif=dif/1000;
timeInSeconds=dif;
hours = timeInSeconds / 3600;
timeInSeconds = timeInSeconds - (hours * 3600);
minutes = timeInSeconds / 60;
timeInSeconds = timeInSeconds - (minutes * 60);
seconds = timeInSeconds;
out.println(hours + " hour(s) " + minutes + " minute(s) " + seconds + " second(s)");suggest if any errors.
-uk0102
Message was edited by:
uk0102

How can I communicate between two simulated software

Hallo,
I have confusion regarding this topic "How can I communicate between two simulated software".
1: PC with CAN simulation
2: PC with AFDX Simulation
Now i have to communicated these two pc with each other.
How can i communicated? which module from ni is best for it.
thanks in advance
BR

I recommend looking at the Simple Messaging Reference Library that NI has released. Use the TCP/IP version of it.
FYI, TCP/IP is a communication protocol that is used to communicate between two computers. It is what the internet uses. So you just need a network switch or router between your computers and you can talk to each other with their IP address.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Using the same photos and music between two user accounts in the same Mac

Hi,
I think this question might have already been asked in the forum.
1. I have one MacBook Pro and two user accounts (One for me and one for my wife)
2. We are having two seperate iPhones with seperate AppleIDs
3. We want to maintain the apps / calendar / mail / reminders / contacts as seperate - Through iCloud (Seperate Apple ID approach) - All this is fine
4. All we want to have it shared is the Music files and the Photo library without duplicating
I have tried the shared folder approach for the music and having the iTunes point to that directory for the libary location in the preferences but unfortunately if she adds a folder to the library mine does not get updated unless I do a add folder to library and vice versa.
Whats the best way to deal with the Photos / Music sharing between two user accounts on the same mac
Thanks
Shas

To give other users read-only access to your iTunes library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
To give others selective access to your iPhoto library, you have the option of using iCloud Photo Sharing, if the privacy implications don't bother you. The images will be stored temporarily on Apple servers.
If you want to give full read/write access to more than one user, see the support articles linked below.
iTunes: How to share music between different accounts on a single computer
iPhoto: Sharing libraries among multiple users
There is a way to share the library without moving it to a secondary volume. If you really need to do that, ask for instructions.

Coherence clustering between two separate wka clusters

Hi,
I am running Coherence 3.6 in my environment.Off lately I am seeing a weird issue with respect to two separate wka clusters. when I mean separate wka cluster, these are two clusters configured with a distinct wka list.
I try to connect with Coherence cmd line tool to a cluster named "cluster-ABC" which has a wka IP- 10.30.xx.xxx on "host x". Then I come out of this cluster, and connect from the same command prompt window to another host -"host y" which has a same named cluster-"cluster-ABC" but a different wka IP-10.30.yy.yyy. Between the two clusters, the only common factor is the cluster name. Other things such as wka list etc are different.
After some time, I see that nodes from "host y" start joining "host x". this seems to happen only when i connect to two different clusters, from my command line utility. The clusters here are formed using wka in each case. there is no multicast enabled on our setups. This used to never happen with coherence 3.5, where i did similar kind of operations on the cluster.
Is there some kind of reference being held by the utility even after it is disconnected from the second cluster?
Thanks,
Chandini

We tried out your suggestion on using unique cluster names. I had 2 hosts each running a cluster with a unique cluster name; cluster-A and cluster-B. I had another node on a third host connect to cluster-A using port 8092 and then tried connecting to the cluster-B after changing the cluster name appropriately. But, this time the node was rejected by cluster-A saying that the configurations are different.
On changing the port from 8092 to 8090 and connecting to cluster-B worked just fine. I guess, just having unique cluster names isn't helping. Would this be fixed by the ticket that's been raised?
Is there anything else we could do in the interim to get around the issue? Using different ports might not be a very helpful solution as we've noticed that 3.6 onwards, we need to open up the ports in the firewall of the host where the nodes are running. This wouldn't be too feasible for us.
-Roshan

Using CCM Directory between two clusters

Similar Messages

Maybe you are looking for