Using ChaRM in specific projects

Hi all,
We are configurating ChaRM 7.1, SP8.
In begining we would like to turn on ChaRM controls in some projects, like pilot.
We want to work with some Project without ChaRM´s controls, with manually transport.
After this we will use ChaRM controls for all projects.
Is it possible?
Thank you very much for your support.
Adriana

Hi Adriana,
To use Projects without chaRM control even after ChaRM is activated please make the following project swithces need to me activated. as shown in the below screen,when you choose Activate Change Request Management for a project, an IMG project is generated in the development system of the assigned logical component. This IMG project generates a CTS project in each assigned client
Project status switches for these CTS projects are automatically deactivated when a task list is generated. This means that the transport requests for the corresponding CTS projects cannot be created, exported, or imported. The figure shows the generated IMG project in the assigned development system and the CTS status switches belonging to the related CTS project.
Click on the Pen icon pointed in the screen and change the CTS Project Status Switch so that you can use for manual transports and again change to "X" to se ChaRM control transports.
Regards,
Vinod Palli

Similar Messages

Hi Friends, Please help me to understand Why we are using CHARM instead of

Hi friends,
I am working as SAP security consultant.
I am fresher and worked in implemetaion project.
My question is when i was in implementation project i used CHARM in sol man to create transport request.
Now i am working in support and here we are not using CHARM simply creating transport in PFCG.
So is there any specific difference between both.
Please tell me

Hi
CHARM is a specific functionality in Solution Manager
so it doesn't mean in all your project or customer are using solution manager charms functionality
therefore you will creating TR from Se09 etc not from UC/NC scenario
Hope clarified your doubt
regards
Prakhar

Automatic Transport Requests and Support Pack Stacks using CHaRM

Hi Experts,
Could you please give your valueable inputs on below Requriements :
1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
would be helpful if any one could send the documentation on above requirements.
Regards,
Vijaysateesh

Hi,
>
> 1. All Transports Requests needs to be Automatically moved from Solution Manager using CHaRM.
Yes. You can schedule a periodic job (say for example daily 6M) to import all released transport requests from QAS to PRD of a maintenance cycle/project. This is the task "Import Transport Request(Backround)" given in task list (tcode-SCMA) of a maintenance cycle.
>
> 2. Automatic Support Package Stacks needs to be updated using Solman - CHaRM
I haven't done this. But this is the task "Import Support Package" given in task list (tcode-SCMA) of a maintenance cycle.
I hope there is no specific documents for these. It's the same documents related to ChaRM.
Regards
Sanjai

How to view area-specific projects in merged Help?

Hi-
While I have been successful in getting RH Server to merge the projects shown below:
...and access the merged projects in this landing page...
http://localhost:8080/robohelp/server
... I can't seem to access one of the individual projects, such as Minerva API HTML Documentation.
The HR Server docs say:
You can access area-specific projects using the following URL:
http://<server-name>/robohelp/server?prj=<project-name>&area=<area-name>
What I think this means is that I should be able to browse to Minerva API HTML Documentation like this:
http://localhost:8080/robohelp/server?prj="Minerva API HTML Documentation"&area=general
However, when I try this, the merged project opens up (as though I were browsing to the first red URL above).
Please advise as to what I might be doing wrong.
Thanks in advance!
-Kurt

Thank you very much !
Just one more question please.
Let's say l want to view and see the oboe, trumpet and clarinet score parts together in the score excluding all the other instruments? How would l go about doing that?
So l can see selected instuments together on the score part under one another.
Thanks for any help you can give !

Using ChaRM Retrofit?

Greetings, Solution Manager experts.
My company is considering implementing an N + 1 ERP environment: 1 stream for maintenance, and 1 for project work.
At this time, I am trying to assess if ChaRM Retrofit is being widely used in the industry, and what benefits and problems companies have seen with it. From what I can tell, there is not much documentation available on this topic.
Are you using ChaRM Retrofit in an N + 1 SAP landscape?
If so, has your company see a benefit to using this product?
Can you offer any tips or watchouts to implementation?
Thanks in advance for your help.

Hi,
Here are the information i collected about his topic. (hard to find information about that) :
Prerequisites :
A retrofit system must exist in the Maintenance Project (role type : Post Processing system). It should be a development system of an other project, for exemple an implementation project.
The task list of the maintenance project will now have two new tasks :
--> general tasks --> Assign Post Processing system to development system
--> Track section --> Post Processing --> retrofit systems --> start retrofit
I wish i could give clues for further research
Regards

Transfer of O/H accounted for In GL to a specific project

Would like help on how O/H example electricity accounted for in a natural account in GL be allocated (absorbed) on a predefined criteria to a specific project as an over head componet to determine the project actual profitability
thanks, would appriciate you help
Roger

The items that are in the GL do not have a path back to Projects.
However we always handled the O/H by applying an O/H rate to each project based on labor. If you used an indirect profit center you could allocate based on each direct profit centers labor costs.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Roger Perera([email protected]):
Would like help on how O/H example electricity accounted for in a natural account in GL be allocated (absorbed) on a predefined criteria to a specific project as an over head componet to determine the project actual profitability
thanks, would appriciate you help
Roger<HR></BLOCKQUOTE>
null

Crashes while opening specific project in Professional 2010

Hi,
I am keep on crashing my MS Project Professional while opening specific project, able to edit other projects without any issues .
event viewer gives following error message, not able to find pdb files to debug
Faulting application name: WINPROJ.EXE, version: 14.0.4751.1000, time stamp: 0x4b8e2648
Faulting module name: WINPROJ.EXE, version: 14.0.4751.1000, time stamp: 0x4b8e2648
Exception code: 0xc0000005
Fault offset: 0x0018e4a4
Faulting process id: 0xe44
Faulting application start time: 0x01d019598e0af28c
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINPROJ.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\WINPROJ.EXE
Report Id: 03f5cf9b-854d-11e4-b02f-1c659dacae4b
any pointers to trace the issue
S.Venkata Appaji

Appaji,
My guess is the file is corrupt. But first, let's make sure you have SP2 installed. It appears from the version number above that you do not. You can download SP2 at: http://support.microsoft.com/kb/2687457. I also recommend you install the June 2013 cumulative
update. You can get that at: http://support2.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2817385&kbln=en-us.
If after installing the updates you still cannot open the file, go to the MVP website at, http://project.mvps.org/faqs.htm and take a look at FAQ 43. Use method 4.
Hope this helps.
John

Has anyone been able to export to flash using a Blu-ray Project in CS3?

Has anyone been able to export to flash using a Blu-ray Project in CS3?
If so what files, settings and OS were you using?
Whenever I try to export to flash from a Blu-ray project the program always crashes.

S&G wrote:
Eric Root's posting answered my question. He said to downlaod DiskmakerX. It worked like a charm to create a bootable Mavericks Installer Flash Drive.
tips on use: https://discussions.apple.com/message/18705466

CHARM Normal Change Project Cycle empty

Hi Gurus,
We are facing an issue in Normal Change in CHARM. The Project cycle and current phase is empty (not auto populated) when we select Normal Change in Scope assignment block. It is working fine for Urgent changes. We have only one project active for both urgent and normal changes. Normal change works fine in CHARM development system. Can anyone please help me getting this fixed ?
Current "phase is Development with Release". We are using Normal Change for the first time in production.

Hi,
Please see the screenshots of task list and project cycle (in web ui). We never closed our project cycle till now. We use Urgent changes regularly but our plan is to roll out normal changes now. Also, I noticed we have different number range mapped for normal change in production but not in development. Does that causes this issue ?

Imovie '11 won't let me share a specific project it says "quit imovie and reopen" how do i fix this and share the project?

imovie '11 won't let me share a specific project that is no different from all the other projects. Every time I try to share or export the project it says "quit imovie and reopen" this can't be a memory problem because I have a lot of memory left and it allows me to export other projects but just not this one. How do i fix this and share the project ASAP?

Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

ChaRM: switch back project implementation phase

Dear All,
is it possible for an implementation project to switch back the phase (for example from test to development or from golive to Emergency Correction)? Which are the contraindications?
Regards,
Bob

Hi Bob,
- technically nothing is blocking you from that
- functionally: you should just pay attention to what have been done in last phase before switching. As long as transport requests sequence is respected during import (meaning you use ChaRM for imports) there should nt be any contraindication
be aware that by checking table /tmwflow/tpphmac for phase model 'devrl' (that corresponds to implementation project) you ll know what is exactely allowed in each phase of your project type.
SAP Would not recommend changing values in this table though
Regards
Khalil
Edited by: Khalil SERRHINI on Sep 7, 2010 11:01 AM

ChaRM on implementation Projects

Hello
I have a conceptual question regarding the use of ChaRM on Implementation projects.
We are using ChaRM and have ensured that CTS is driven from Solution Manager i.e transport requests can only be created from corrections (SDMI). To date all SDMI's have been created as follow on documents to Change Transactions (SDCR). Going forward we would like to differentiate genuine changes (Changes to scope after blueprint sign off) from implementation activities driven from blueprinted requirements.
Whilst we see benefit from approval workflows for genuine changes, it is quite a chore to create SDCR's for all regular implementation work which is implicitly approved by signed off blueprint.
It is also difficult for us to then differentiate Changes from Implementation SDCR's.
Can anyone see a problem with all implementation tasks being generated directly as SDMI's with no preceding SDCR whilst leaving genuine changes as SDCR generated corrections?
The only one I can think of so far is that there is workflow that sets the status on an SDCR when the SDMI has been through it's lifecycle although I'm not sure how the system would behave if there is no SDCR.
Thanks
Mark

Hello,
for the first please use SDMJ. SDMI is old.
You can create SDMJ directly without SDCR and his approval workflow. There is no problem.
It is not really clear how to work with Implementation projects and "changes".
There are two known scenarios:
Implementation project (phase of the application management life cycle is "Implementation"):
If you have an really Implementation project for an Implementation of for example an new SAP product you should use an "Implementation project". It is not a change request!
Here you work with the known IMG-projects, blueprint, project phases.....
The transport process is realized via bc-sets. It means you create all you "changes" in bc-sets.
Implementation project (phase of the application management life cycle is "Optimization"):
Here you can use also the "Implementation project"
You can create SDMJ directly without SDCR and his approval workflow. There is no problem.
The transport process is realized via transport requests.
I guess the different between this two scenarios is the transport process.
Hope this is helpful.
Best regards
Thomas

Use of Access Specifies

i am new to java plz explain the use of Access Specifies
in java. & how we can make a project on them
plz do this favour to me.
if any one can guide me plz u can also send me mail on this submiy i.d is:- [email protected]

public -- accessible to all classes
protected -- accessible to classes in the same package and subclasses
package -- accessible to classes in the same package
private -- accessible only within the class

Unable To Load Specific Project

Dear all,
I seriously need help here. I've been working on a project for a few weeks and just a day ago while i was halfway working on it, iMovie'09 exited unexpectedly. When i relaunch, i've been having problem loading this specific project. It kept having the spinning icon on the preview window and stays that way forever.
I have no problem loading other projects. What could've happened?? I can't afford to redo the entire project as it is a real pain to do so! I could remember the last thing i did before iMovie'09 exited was copying & pasting some text from the web to that project i was working on. And suddenly this happened.
I've tried reinstalling iMovie, deleting project folder, disabling fonts, etc but to no success.
Any help would be much appreciated!
Thank you.

Has anyone had any luck repairing, rebuilding or recovering a damaged project? I think I'm suffering the same thing. In my case, the project loads into the project window so I can see the clips, transitions and such, but it will not play. So close, and yet so far.
I've been searching this forum for answers. There are a lot of reports of projects that suddenly "die" but it seems that every thread ends with a question mark and no solution.
If there's no way to fix a broken project, this is a very serious flaw that everyone should consider before devoting days of effort to an iMovie project. Of course backups will save some effort but let's face it, most programs don't routinely produce damaged files. This needs to be fixed or users need to warned up front of the possibility of losing hours of work.

Using ChaRM to register objects in Marketplace

Hello,
We want to control what changes are done to SAP standard workbench objects, using ChaRM, so that for example every time a program needs to be registered to make customer modifications in the marketplace we can do it using a ticket from ChaRM. Then we can have an approval process and a total traceability.
Is that possible? Is there any alternative way to have that controlled in Solution Manager?
I appreciate your comments.
Regards
Esteban

Hi Prakhar,
Thanks for your answer. However the issue is a bit different. Customer found that they want to make a modification in a standard code because of business needs. So, they need to access to the marketplace to register that object. No incident was created in Service Desk, no notes from SAP. We want to have a Change Request and a Change Document to control the modifications and registration of this object. However I did not found any action in ChaRM Change Document that allows me to access marketplace and keep track of this registration in the change document.
Do you have any idea?
Many thanks
Esteban

Using ChaRM in specific projects

Similar Messages

Maybe you are looking for