Using Cisco WCS with Microsoft IAS

Hi.
I have two 5508 and WCS 7.0.172. I want to user Active Directory users credintals to login on ther WCS. Have a configurated NPS role on server with windows 2008 r2.
I have read this http://zmq503o1.wordpress.com/2008/01/06/using-cisco-wcs-with-microsoft-ias/ and done the same.
I dont't agree with "on the "Encryption" tab and clear all the checkboxes except "No encryption" - wants an encryption connection but this didn't work till in user's properites in AD permit "Reversible encryption". This is not what that I want.  Would I need to generate ssl-cert for the wcs as wroted this?http://www.cisco.com/en/US/docs/wireless/wcs/7.0MR1/configuration/guide/hard.html#wp1042471
or doing smth else? thx

Camera is only supported for use with CUVA. Any other application attempting to utilize the camera is not tested and is not supported.

Similar Messages

  • 802.1x Authentication using Cisco Phone LSC and IAS 2003

    I'm trying to authenticate Cisco 7975 phones using the LSC and Microsoft IAS 2003.
    The CA was generated from the IAS server (Domain Controller) and was imported and used to generate the LSC that have now been deployed to the phones.
    Does anyone know how to configure the IAS server to authenticate the phones?                  

    HI Saad,
    Check this link to get info about EAP Types:
    http://www.networkworld.com/article/2223672/access-control/which-eap-types-do-you-need-for-which-identity-projects.html
    I will prefer to use EAP-TLS because of the security.in This type you need certificate on both side(Client and Server), also you can add AD to authenticate user.
    Regards
    Dont forget to rate helpful posts

  • How to Use Web Printing with Microsoft Excel

    Hello,
    In the recent How to paper on Use Web Printing with Microsoft Excel, describes few ABAP classes and methods. Can those classes be modified  to access much more Microsoft excel objects , such as Macro ? Does any body has tried in those lines ? Any suggestions is eagerly awaited.
    regs
    D Bret

    Hi BW people,
    Since we want to modify our reports for printing (and the How-To about enhancement of web printing does not really answer to our requirements) it seems that the Excel alternative is just what we were looking for.
    Unfortunately I have been working with these classes for 6 hours now to get a very simple Excel file, but without success. I did fix the bug like Thomas Kauffman told on the forum, changed the dataprovider and prefixes and I followed every single step of the How-To document(also the check of folder options to open/save the .xls file),... The only thing that happens: the URL has changed (bookmark) and the page is reloaded again.
    So no Excel file, neither a dialogue box. I also walked -a very long time- through the code (in debugging mode) starting from ZCL_RSR_XLS_HELP_WINDOW_PRINT->PROCESS_CMD but I can't find anything!
    Is there anybody with the same problem and -better- with a possible solution to it?
    Thank you very much in advance!

  • I've just purchased an iPad 3, 4th edition. I have been using a PC with Microsoft office xp and would like to sync. My emails, contacts, word docs, photos, music now and in the future. What are my best options? Also, can icloud be used with my PC.

    I've just purchased an iPad 3, 4th edition. I have been using a PC with Microsoft office xp and would like to sync. My emails, contacts, word docs, photos, music now and in the future. What are my best options? Also, can icloud be used with my PC.

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • Can I use Web Services with Microsoft Access?

    I'm somewhat handy with Microsoft Access (2003 in particular), but not an expert. Macros? No problem. VBA? I'd be hard pressed to code anything from scratch, but I'm not too bad with modifying code/examples to fit my particular scenario. So, if anything about this doesn't ring quite right, now you'll know why. Some years ago I worked with another guy to develop a module that used REST(?) to query some web services at Yahoo!. If that worked, I was hoping that I could do similar things with CRMOD I was thinking, for example, I might want to get the Opportunity Sales Stage for a number of records. And since there are tools for Excel and Word, I thought Access might work, too. As a starting point, I imagine I need to use the Web Services Toolkit for Office 2003. But frankly, I don't even know where to go beyond that.
    Am I wasting my time? Any suggestions for an intro to web services?

    Probably not through USB.
    But likely if its anytihng like the Microsoft Sync in my Ford Explorer you can play audio from it through Bluetooth.
    You can read here for compatibilites, and features.
    http://www.ford.com/technology/sync/
    I connect My iPad to the Sync media center with no issues and can play my musci from the iPad thorugh the car stereo speakers.

  • Cisco Unity with Microsoft Exchange over WAN Question

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    A customer has several offices. Each office has a separate Exchange Server. The partner was considering a single Unity deployment connected to all of the exchange servers over the WAN, but has decided against that because the latency of the WAN is too high to do this. They are looking for a best practice way of deploying Unity for these multiple Exchange servers at multiple sites. This might mean a separate Unity server for each exchange server at each site .
                    However, we’re wondering if there is a better way to do this. With multiple unity servers we’ll likely have different prefixes for each unity server at each location . This is something that the customer would like to avoid. We’re wondering if there any best practices for a deployment like this that we can offer as options for the customer.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin:0in;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-fareast-font-family:"Times New Roman";
    mso-fareast-theme-font:minor-fareast;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;}
    I have found some related information but really customer is altogether looking for an option away from Exchange networking over WAN.
    I found:
    “Multi-Site WAN with Distributed Messaging”
    http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/design/guide/5xcudg040.html#wp1077309
    “Networking Options Requirements for Cisco Unity”
    http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_installation_guides_list.html
    Design Guide for Cisco Unity also talk as much is there in the first URL.
    Please Help!

    This may be counter to your customer's desire or requirements but I must ask the question.  Has the customer considered Unity Connection vs. Unity?  Granted, Unity Connection provides integrated messaging whereas Unity is the unified messaging application; however, CUC has become Cisco's flagship messaging product over the last couple of years and I only see this expanding to be honest.  So, for new installs - I push hard on Unity Connection.  Sometimes, it's a sell but sometimes the customer has a hard requirement for UM and thus you have to go with UM.  In your scenario, your customer could potentially save a LARGE amount of money as CUC is not dependent upon Exchange at all; however, you still have the option to tie into Exchange 2003/2007 as an external service where users can access messages in a 3rd-party message store and also access calendar data and so forth.  The platform is very feature rich.  Many of my current Unity customers are migrating off of the platform to the more "agnostic" CUC platform to avoid issues caused by such dependence on AD/Exchange.  In addition, as Microsoft continues to develop and push it's own UM solution - integration for Unity is being forced to change (ex: changes to MAPI in 2010 caused problems for Cisco and required them to rework a bit of the underpinning integration points between Unity and Exchange).  With CUC, you also have the flexibility to implment a dial plan within voicemail system itself...not to mention it is extremely scalable.
    Hailey
    Please rate helpful posts!

  • Use Machine Translation with Microsoft.Office.TranslationServices

    I have implemented custom translation for translate Text to another language and it works properly. Here I used "Microsoft.Office.TranslationServices.dll" and used its classes.
    I have a scenario like this. Lets say I do not want to translate a selected words such as "Work Order". So there I've got a dictionary with the language and word. (Multidimensional Dictionary). So I want to pass that dictionary to the service and
    need to map the words I've mapped there. Is it possible to do so using this "Microsoft.Office.TranslationServices"?

    I am wondering if this has anything to do with having the user log into Excel.
    In point #5 above: Under DCOM config, Microsoft Excel Application, if I modify the Identity tab to check on "This User" and enter the username/password to let Excel always run under that user. Then the application runs perfectly. However, other
    users can't run the excel application on their own with the following error: "Cannot use object linking and embedding". If I check "Use the launching user", then Excel can't be launched. No errors in the logs or events anywhere to check.
    Because running with the launching user proposes an user to run the Excel application. However, I do not think there is any where that we can pass in the password for this user to Excel. However, this Excel has all the permissions to Excel application as
    well as the folders that have the Excel files.
    Please help!
    Thank you!

  • Wirelss AP1140 Radius authentication with Microsoft IAS

    Hi,
    I have a Cisco C1140 Ap. I have cnfigured the device. Initially for testing i used WPA and authenticated locally. I have now setup a radius server and added my AP in as a client etc. I have changed my SSID's to authenticate with the radius server and i am having issues authenticating.
    I can connect via a PC and an iphone. They say that i am connected but i get no ip address and the debugs state that the authentication fails:
    000466: Sep 5 14:33:07.074 AEST: %DOT11-7-AUTH_FAILED: Station 40a6.d967.8b13 Authentication failed
    000467: Sep 5 14:33:28.368 AEST: %DOT11-7-AUTH_FAILED: Station bc77.3771.b15f Authentication failed
    000468: Sep 5 14:33:39.837 AEST: %DOT11-7-AUTH_FAILED: Station 40a6.d967.8b13 Authentication failed
    I can see the Radius server as connected
    imc-syd-ap1#show aaa servers
    RADIUS: id 4, priority 1, host 10.10.0.2, auth-port 1645, acct-port 1646
    State: current UP, duration 4337s, previous duration 0s
    Dead: total time 0s, count 0
    Authen: request 0, timeouts 0
    Response: unexpected 0, server error 0, incorrect 0, time 0ms
    Transaction: success 0, failure 0
    Author: request 0, timeouts 0
    Response: unexpected 0, server error 0, incorrect 0, time 0ms
    Transaction: success 0, failure 0
    Account: request 0, timeouts 0
    Response: unexpected 0, server error 0, incorrect 0, time 0ms
    Transaction: success 0, failure 0
    Elapsed time since counters last cleared: 1h12m
    The debugs show:
    000474: Sep 5 14:36:00.969 AEST: %DOT11-7-AUTH_FAILED: Station bc77.3771.b15f Authentication failed
    000475: Sep 5 14:36:01.485 AEST: AAA/BIND(00000109
    show dot11 associations:
    imc-syd-ap1#show dot11 associations
    802.11 Client Stations on Dot11Radio0:
    SSID [IMC-Wireless-Data] :
    MAC Address IP address Device Name Parent State
    bc77.3771.b15f 0.0.0.0 ccx-client DAVID self AAA_Auth
    Any ideas or recomendations would be greatly appreciated
    Thanks
    Below is a copy of my wireless config:
    version 12.4
    no service pad
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    hostname xxxxxxxxxxxxxx
    logging buffered 40960 debugging
    enable secret 5 xxxxxxxxxxxxx
    aaa new-model
    aaa group server tacacs+ IMC
    server 172.16.100.3
    aaa group server radius AUTHVPN
    server 10.10.0.2 auth-port 1645 acct-port 1646
    server 10.11.0.24 auth-port 1645 acct-port 1646
    aaa authentication login default group IMC local enable
    aaa authorization exec default group IMC local if-authenticated
    aaa session-id common
    clock timezone AEST 10
    clock summer-time AEDT recurring 1 Sun Oct 2:00 1 Sun Apr 3:00
    no ip domain lookup
    ip domain name imc.net.au
    dot11 syslog
    dot11 ssid IMC-Wireless-Data
    vlan 10
    authentication open eap AUTHVPN
    authentication network-eap AUTHVPN
    guest-mode
    mbssid guest-mode
    infrastructure-ssid optional
    information-element ssidl
    dot11 ssid IMC-Wireless-Voice
    vlan 14
    authentication open eap AUTHVPN
    authentication network-eap AUTHVPN
    mbssid guest-mode
    information-element ssidl
    dot11 aaa authentication attributes service login-only
    bridge irb
    interface Dot11Radio0
    no ip address
    no ip route-cache
    encryption mode wep mandatory
    ssid IMC-Wireless-Data
    ssid IMC-Wireless-Voice
    antenna gain 0
    mbssid
    station-role root
    interface Dot11Radio0.10
    encapsulation dot1Q 10 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio0.14
    encapsulation dot1Q 14
    no ip route-cache
    bridge-group 14
    bridge-group 14 subscriber-loop-control
    bridge-group 14 block-unknown-source
    no bridge-group 14 source-learning
    no bridge-group 14 unicast-flooding
    bridge-group 14 spanning-disabled
    interface Dot11Radio1
    no ip address
    no ip route-cache
    encryption mode wep mandatory
    ssid IMC-Wireless-Data
    ssid IMC-Wireless-Voice
    antenna gain 0
    no dfs band block
    mbssid
    channel dfs
    station-role root
    interface Dot11Radio1.10
    encapsulation dot1Q 10 native
    no ip route-cache
    bridge-group 1
    bridge-group 1 subscriber-loop-control
    bridge-group 1 block-unknown-source
    no bridge-group 1 source-learning
    no bridge-group 1 unicast-flooding
    bridge-group 1 spanning-disabled
    interface Dot11Radio1.14
    encapsulation dot1Q 14
    no ip route-cache
    bridge-group 14
    bridge-group 14 subscriber-loop-control
    bridge-group 14 block-unknown-source
    no bridge-group 14 source-learning
    no bridge-group 14 unicast-flooding
    bridge-group 14 spanning-disabled
    interface GigabitEthernet0
    description IMC-Wireless-Data
    no ip address
    no ip route-cache
    duplex auto
    speed auto
    no keepalive
    interface GigabitEthernet0.10
    description IMC-Wireless-Data
    encapsulation dot1Q 10 native
    no ip route-cache
    bridge-group 1
    no bridge-group 1 source-learning
    bridge-group 1 spanning-disabled
    interface GigabitEthernet0.14
    description IMC-Wireless-Voice
    encapsulation dot1Q 14
    no ip route-cache
    bridge-group 14
    no bridge-group 14 source-learning
    bridge-group 14 spanning-disabled
    interface BVI1
    description IMC-Wireless-Data
    ip address 10.10.0.245 255.255.255.0
    no ip route-cache
    ip default-gateway 10.10.0.254
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
    ip radius source-interface BVI1
    access-list 111 permit tcp any any eq telnet
    access-list 111 permit tcp any any eq www
    access-list 111 permit tcp any any eq 22
    snmp-server community public RO
    snmp-server enable traps tty
    tacacs-server host 172.16.100.3 key 7 xxxxxxxxxxxxxxxxxxx
    tacacs-server directed-request
    radius-server host 10.10.0.2 auth-port 1645 acct-port 1646 key 7 xxxxxxxxxxxxxxxxxxx
    bridge 1 route ip
    wlccp wds aaa authentication attributes service login-only
    line con 0
    line vty 0 4
    access-class 111 in
    exec-timeout 5 0
    line vty 5 15
    access-class 111 in
    exec-timeout 5 0
    sntp server 10.10.0.254
    end

    Inside the ssid, when you put "authentication open" it's an eap_method that follows. You put your AUTHVPN aaa server group name. that's wrong.
    aaa authentication login  group AUTHVPN
    and adjust your "authentication open eap " to match with that method name.
    Also your group authvpn contains a 2nd server that is undefined in yoru global config ...
    Nicolas

  • Using Cisco Connect with 2 different Routers

    I have the linkys n300 E1200 at my office and the Linksys E1000 at my home.  How do i configure Cisco Connect to work with both of these routers so i don't have any connectivity issues?

    You can only have one Cisco Connect software installed on your computer. What are your challenges with the Linksys routers? Are you experiencing slow connection? Or intermittent connection? Does it occur on both routers? Since the two routers are on two different locations, we need to properly isolate this matter to know what is really causing it. 
    Updating the router's firmware will help in resolving connectivity difficulties. If the wireless connection drops, you can also try adjusting the wireless channels of the router. I am using channel 9 for my EA4500 router. Make sure as well that the router is being placed on a higher location or less interference area. 
    Share more details about this matter. Community users are here to help.
    Help, learn and share

  • Using Cisco Connect with several E1000 routeres

    I have two E1000 routeres, one at home and one at the office, and I have installed the Cisco Connect (CC) software on my laptop, and used it to congifure both devices with.
    The first time I tried to connect CC to the router at the office, it removed the settings from my home router, and accessed the E1000 ok and I could configure it without any problems via CC.
    But when I now tries to use CC to configure my home router via CC, it keeps complaining about me not beeing connected to the right router, and CC won't allow me to connect to my home router eventhough I type in the correct password etc.
    Does anybody know of a trick to use the same CC for configuring multiple E1000's ? Or how to get CC to "forget" its settings and connect to a new E1000 router?
    Thanks.

    So the concern that you said is the configuration of the Router ( E1000 ) at home.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
    If you want to configure the router with the help of the CD so for that you need to uninstall the existing Cisco Connect Software from the computer...
    Reset the Router and power cycle the network...
    Make the following connectivity Modem ----> Router -----> Computer... Then install the Cisco Connect Software... It will help you in configuring the Router...

  • 802.1x Wired using EAP-TLS with Microsoft SCCM 2007

    Hi,
    I'm currently in the process of deploying 802.1x across 10,000 devices - Avaya IP phone, Hp t510 Thin Clients and a mixture of WinXP SP3 and Windows 7
    The bombshell has been dropped that our desktop guys are going to use SCCM 2007 to manage/re-image PC's
    Can anyone point me to any useful info as to how SCCM works on a Wired 802.1x network with User and Computer certificate authentication??
    The most basic query I have is this, if we re-image a PC, both User and Computer certs will disappear therefore 802.1x authentication will fail and the device subsequently drops off the network :-(
    Any ideas or suggestions?
    Many thanks,
    Matt

    Hello Matt-
    The only other thing that I can think about is the device enrolment via SCEP. However, that process will not be fully automated and it will require users intervention. In addition, you can create a "White List" authorization rule where you can temporary and manually add/remote MACs. You can add the MAC(s) for the machine(s) that have to be re-imaged and then remove it when all set and done. Other than that I am not aware of any other methods that you can do this.
    Thank you for rating!

  • Cisco WCS integration with SNMP based monitoring

    I am looking for a solution to integrate Cisco WCS with any SNMP based monitoring solution.  My requirement is below,
    - Alerts for Access points up/down should be picked up by an alerting system in its console through SNMP.
    - I dont want all access points to be monitored, but only a critical group.
    Currently all access points are configured on LWAP mode under a wireless controller.  Can i configure APs individually for SNMP and get it monitored through the 3rd party monitoring tool.
    Can anyone please guide me to find a solution for this.

    http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch2_CAS.html

  • Using Cisco  LocalDirector 400 with WebLogic

              Does anyone have any feedback on using Cisco LocalDirector with WebLogic 8.1 cluster
              - especially wityh SSL persistence
              Thanks
              Henry
              

    Is there any specific issue you are trying to resolve?
              "Henry Nghiem" <[email protected]> wrote in message
              news:40f548d5$1@mktnews1...
              >
              > Does anyone have any feedback on using Cisco LocalDirector with WebLogic
              8.1 cluster
              > - especially wityh SSL persistence
              >
              > Thanks
              > Henry
              

  • Disabling the unlimited Lifetime option in Cisco WCS Guest User Creation

    Is there  a way to disable the unlimited Lifetime option in Cisco WCS Guest User Add/Schedule tab.If i make those fields uneditable, it just takes out the option to schedule any meetings in future.Using Cisco WCS version 7.0.220.0.

    i'm also searching for an solution to disable the unlimited lifetime button for the Lobby Ambassador.
    could it that Cisco introduces this maybe a future release?
    couldn't be that there are only few people who are disappointed with this solution.
    My Customer is thinking now that cisco isn't the right solution for him.

  • Does iWork come with a form of powerpoint presentation compatible with Microsoft Office Powerpoint?

    I recently bought a MacBook Pro and need to purchase iWork or Microsoft Office. Does iWork come with a form of powerpoint presentation? If so, is it easy to use and compatible with Microsoft Office presentation software? The latter question is extremely important as we use Microsoft Office primarily at the college.

    Yes, Keynote is iWork's PowerPoint equivalent. You can save as a PowerPoint file as well. Very easy to use IMO.

Maybe you are looking for