"Using common Division"

Hi Gurus!
I have two sales areas. In sales area a) 1000/10/00 i 've maintained customer master, material master and condition master records.
_Using common division_
I thought to extended the cust & mat masters to the other sales area as well, and hence did so. i.e, to sales area b) 1000/10/10 it was fine till here. But, when i am trying to extend the condition master to this sales area. the system could not determine the pricing procedure for this sales area.
according to my understanding if we refer a div/con to the other division. the system has to automatically extend the cond records to the other sales area. The flow has to be like...
after entering the cust no' in sales doc. the system identifies the customers extended sales area. and once we enter the material the system determines the condition record with refrence to the pricing procedure determination which has already been maintained for the sales area 1000/10/00.
i need not maintain any pricing procedure determination for other sales areas.
Now my Q is the system is asking to maintain a pricing procedure determination for the new sales area
if i do, the div/con will not serve the purpose. "please illuminate me".
Regards
KV
Edited by: krishna vamshi on Jun 22, 2008 9:25 AM
Edited by: krishna vamshi on Jun 22, 2008 9:50 AM

Dear Sadhu,
I may not want to have a different pricing procedure for the new sales areas. my intent to chose con/div is to avoide the pricing determination for the other 90 sales areas which is tedious.
to check out, i took your suggestion and maintained the determination using another pricing procedure. the system now picked the condition record. but, when i checked pricing analysis at item level. to my suprise it has picked the cond record form PR00 of the new pricing procedure.
Regards
KV

Similar Messages

Common Distribution Channels and Common Division

Hi experts,
We are encoutering an error and i think its because of common distribution channels and common divisions.
1:IN Development client we can see the common distribution channels and common divisions setup. But no one says he/she has set them up. Is it possible that the enterprise structure settings filter to this?? May be weird doubt but i wanna make sure.
2: If they are setup in Development , there should be a transport request and am unable to see any??
3: If we need the same settings in Test, We will have to set them up in Test client or we can move the transports from DEV to TEST for these settings??
4:And also if these are not setup , do we get an error while creating customers and materials for sales areas?
Please Advice.
Thanks & Regards
Sai

1. Defining Common Distribution Channels for Master Data
Use
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Distribution Channels
Transaction Code: VOR1
2. Defining Common Divisions for Master DataUse
The purpose of this activity is to define distribution channels which have common master data..
Procedure
Access the activity using one of the following navigation options:
IMG Menu -> Sales and Distribution -> Master Data -> Define Common Division
Transaction Code: VOR2
1:IN Development client we can see the common distribution channels and common divisions setup. But no one says he/she has set them up. Is it possible that the enterprise structure settings filter to this?? May be weird doubt but i wanna make sure.
2: If they are setup in Development , there should be a transport request and am unable to see any??
3: If we need the same settings in Test, We will have to set them up in Test client or we can move the transports from DEV to TEST for these settings??
4:And also if these are not setup , do we get an error while creating customers and materials for sales areas?
Configuration of common distribution channels and common divisions is a required setting, else it will give an error for Customer & Material Master. This setting has to be done in Development Server & transported to Test & Production Server. If you do not find Transport request, then try to do change in configuration & redo the correct configuration & save the Transport Request.
Hope the above is helpful to you.
Regards, Rajesh Banka

Common distribution channel and common division

Hi experts,
Wt is the use of common distribution channel and common division in sale prcocess?
let me know wt are the configuration i have to do for common dist chanl and common division activation.
Regards
Ishikesh

Hi
SAP has the concept of common distribution channel for sharing master data( for customer/material and conditions) across multiple distribution channels under a sales orgsnization
That means say if you have the sales org say 1000 and three distribution channels under them say 10,20 and 30
Now you create a common distribution channel say 40 and assign them in VOR1 like this
sales org--DC-common distribution channel for customer/material ---common DC for conditions
1000--1040--
40
1000--2040--
40
1000--3040--
40
Now you can or need to create master data for customer/material and conditions only for DC 40
There is no need to create separate master records for 10 and 20 and 30 distribution channel's
That one master record created for DC 40 will solve the purpose for 10 and 20 and 30 distribution channel's
*When you create a sales order for the distribution channel say 10 system will check whether that customer is created for DC 40 and material is created for DC 40 and condition record is valid in DC 40*
Similarly for distribution channels 20 and 30 also system will check whether that customer is created for DC 40 and material is created for DC 40 and condition record is valid in DC 40
That means whenever you say DC as 10/20/30 in sales order system will take that as DC 40 and whatever is valid for DC 40 will be applicable for 10/20/30
Instead of three master records one record in the name of DC 40 is sufficient
Similarly for common division but with a difference
The common divisions is for customer and conditions only not for materials
You can see this in VOR2 go to VOR2 t code and observe the difference of that with VOR1
This is a key assignment in SAP and without this being defined you cannot create CMR, or MMR or condition record and one in t codes VOR1 common distribution channel and VOR2 common division
This is a fundamental basic concept any SD consultant should be very clear in his mind
Regards
Raja

Common division

My client has 4 divisions. He wants all the products in 4 divisions to be in a single sales order. I suggested common division. But he is adamant on keeping all the divisions seperate but at the same time wants them in a single sales order. Plz suggest solution.
Can i use user exits here.
Regards,
Pankaj

Hi Pankaj
The common division factor will not work for you
The assignment in commom division is for conditions and customers only not for materials
Suppose if you have three divisions like 01,02,03
Suppose sales raeas like this 1000,10,01 and 1000,10,,02 and 1000,10,03
In common division if you have assigned 01 against 01 and 02 against 02 and 03 against 03 in VOR2
These 01,02,03 are the divisions for three different products in material master
I beleive this is what you are doing
You will not be able to succeed
If you keep common division as 00 against 01,02,03 in VOR2
Basically the material master then should have 00 against all products then only it will work
But this is what client is against as per your statement
In VOV8 there are 2 fields called check division and item division
These are troubling you
Suppse for a customer who is in sales area 1000,10,01 if you enter a sales order for the product which belongs to 01 no problem the moment if you enter products of 02,03 the trouble starts
Because header division is 01 item division is 02 or 03
When the header div and item div is different these 2 fields check division and item division in VOV8 and their importance comes into picture
The check division is the reaction you want the system to give
Keep this as blank
If item division is ticked then the sales order with header div and item div different is not possible or permitted and i beleive this is what is happening to you
Pls untick the this item div field
Now in this case if the header div and item is diffrent then there should be a SH in the tem div sales area who is assigned to this SP
Means 1000,10,01sales area of SP, order entered for material of div 02
then there should be SH in sales area 1000,10,02 who is assigned to this SP
then only it is possible
Alternatively you have to extend this SP to sales area 1000,10,02 in XD01
For you the best soln is SP has to be extended to all the possible sales areas or the sales areas where material div will fall in XD01
Without this being done it is not possible in SAP
Sol in a nutt shell is
Keep check division blank in VOV8
Untick itemdivision in VOV8
Extend the CMR to all possible sales areas in XD01 for that customer
I know it is slighly difficult area to understand
But if you do some R & D on this you will understand it better
I will be really happy if you reply to this post
Regards
raja
Edited by: ramanathan raja on Dec 13, 2008 1:40 PM

Common division doubt

Dear SAP guru's
     Can you tell me if i create a common division and assign it. When we create a sales order we give the sales org, dist channel, common div.
      Now customer is created in one of the divisions - so how do we take the reports for same customer - division wise, dist channel wise, and sale org.
     And whether the customer has to be created with common division or how to go about.
points will be rewarded
regards,
Reshmi

Hi reshmi
You can define that customer master records, which have been created for each sales organization for a distribution channel (or division), are also valid in other distribution channels (or divisions). As a result, you create and change customer master records that are required in different distribution channels or in different divisions only once. This makes it easier to create and change master records.
You can also use the same function to process article master data and prices.
Activities
In the standard R/3 System, you can define common master data for the following:
Distribution channels
In Customizing, you can specify other distribution channels in which the customer master data (and article master data and prices) from the reference distribution channel are also valid.
Divisions
In Customizing, you can specify other divisions in which customer master data (and article master data and prices) from the reference division are also valid.
Prerequisites
You do this in Customizing for Master Data (Sales and Distribution) in the following activities:
Define Common Distribution Channels
Define Common Divisions
Example
Customer master record has been created
Sales organization
Distribution channel
Customizing: Data is also valid for these distribution channels
Yes         0001          01            02
No          0001             02
You create a customer master record for the sales organization 0001 and distribution channel 01. In Customizing, you specify that this customer master data is valid for the distribution channel 02. When you process a sales order for a customer in the sales organization 0001 and distribution channel 02, the system uses the customer master data entered for distribution channel 01.
Reward if useful to u

Common division & distribution channel

Hello all,
             Kindly provide a solution to my query . Incase of same division & sales organisation but different distribution channel we can maintain common distribution channel so that no separate customer master data needs to be maintained for different distribution channels if customer details are same.
             But incase where either division or distribution channel & division is/are different we can maintain common distribution channel & division so as to use the same customer for different sales area. But here do we need to maintain separate material master record for each division along with customer -material info record as well as condition record (customer/material)...???
As in here although common division is maintained but the materials ( Pharma & Paint ) are different along with their industry sectors....so how can the same material master be maintained for both the divisions..?
Sales org : LSE
Dist chl : LR & LS
Div : PH & P1
               Please provide any input .                                                                                Thanks.

Hi
As of my understanding,
Sales org : LSE
Dist chl : LR & LS - Choose either of LR / LS as a common distribution channel.   SAY LR is a common division
Div : PH & P1 in this case SAY PH is a common division.
Now
1. Your commond distribution channel and Division will be used only in case of creating of Customer Master. So your Customer master will be created in the following sales area.
Sales org :   LSE
Dist chl :       LR
Div :              PH
2. To create Material Master Data we need only Sales org and Distribution channel. Division is not Required.
Sales org :   LSE
Dist chl :       LR
For the reporting or LIS / SIS purpose you can keep seperate divisions for the Every Material.
Say Material A with Division PH
Material B with Division P1.
Try Maintaing the data like this it will work for you.
Now here make sure when you create sales order , before that go to VOV8 and remove the entry for CHECK DIVISION (keep it blank) other wise system will give the error, Header division and item division will mismatch.
Finally for Condition again you can keep the respectively seperate division for each kind of material
Thanks
Rishi

Bus-Master DMA using Common Buffer for Win XP driver

Explain the basic steps required for Bus-Master DMA using Common Buffer for Win XP driver.Explain the device description struture "MaximumLength" field usage also.Explain the usage of addresses returned by
AllocateCommonBuffer. Provide sample code if any.

amar wrote:
> Explain the basic steps required for Bus-Master DMA using Common
> Buffer for Win XP driver.Explain the device description struture
> "MaximumLength" field usage also.Explain the usage of addresses
> returned by
> AllocateCommonBuffer. Provide sample code if any.
Sounds like a task assignment in high school to me.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

What is purpose of common division?

what is purpose of common division? give
some examples

Dear Mr Raj,
Regarding common division let me try to offer an example:-
A petrol pump offers both petrol and diesel, of different grades and brand names.
There are certain pumps that are located inside cities, that do not have much diesel sales, and so confine themselves to selling petrol.
There are other pumps, located on highways that cater solely to large commercial vehicles, that are run exclusively on diesel.
Both products are supplied from the same depot of a petroleum product refiner.
Vehicles from depots to the pumps, may carry either one or both of the products, concurrently, for delivery at the same or at different pumps, from the point of view of optimally utilising the capacity and similar services of the vehicle.
Both the products are defined as different divisions, within the respective material master.
To cater to such a scenario, the provision of common division is used, where one of the products is used as common division, say petrol for both petrol and diesel.
It practically works as follows:-
A common sales order may be entered for both the products indented together by the same pump.
A common billing document would be generated.
This is as far as convenience of order entry and billing go.
Further, in case of pricing, terms for local levies like octroi can be set up together bringing down the maintenance of pricing conditions.
Trust this serves to illustrate the use of common division for order entry and pricing.
Regards,
K Gopidas

Want to assign common division to 10 divisins

Hi Gurus,
For STO purpose i create a common division ,now i want to assing ten divisions to this common division.
But in transaction code VOR2 , only two division assingment can be possible and here no NEW ENTRY is possible .
please help me , because in tab"Define Shipping Data for Plants " only one division can be assing for one plant.
Please reply ASAP
Devdatta Joshi

Hi,
Go to SPRO -> SD -> Master Data -> Common Divisions
Now if have created ur BP in one common division, and would like to use the same BP in other divisions (say the 10 that you have now created).
Put ur sales org - each one of those 10 divisions - common division for all the these 10 combinations
For eg
S001 - Div 1 - Common Div (CC)
S001 - Div 2 - Common Div (CC)
If useful please reward
Regards
Ravi

Working on ETL tools interoperability using Common Warehouse Model (CWM)

Hi All,
Its just a piece of information and not a question.
I have been working on proving the ETL tools interoperability using Common Warehouse Metamodel(CWM), an OMG standard. The whole concept is to take out the metadata from an ETL tool say OWB and put it into CWM Metadata Repository and this metadata can be used for building the same project in any other tool say Informatica or may be in the same ETL tool.
The main thing in this process is to map each ETL tool with the CWM concepts and then using Model to Model Tranformations(Technologies like Xtend) one can set up a communication between different ETL tools.
Till now I have worked with OWB only. I, with my team, have extracted all information from an OWB project (which has medium level of complexity like two oracle modules(schemas) and few tables, views and mappings with various operators) and put it in CWM repository and extracted it back from CWM MDR to OWB itself. We haven't worked with any other ETL tool because of the unavailablity of any other ETL tool with us. We will be working with Pentaho kettle in near future and try to prove the whole process as two way communication.
The whole process can be described in steps as below :
1. Creation of a manual OWB Ecore model(model representaion in Eclipse Modelling Framework) which gives all dependencies and reletionships in OWB objects like Project,OracleModule etc.
2. Creation of CWM ecore model from Rational Rose mdl which has been provided by OMG on their site.
3. Generation of Java code(Gen Model) from the above mentioned ecore model(It is needed to create an object from OWB).
4. Extraction of project from OWB using public views which has been exposed by OWB itself. You can refer to [http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/toc.htm|http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28225/toc.htm] link for OWB public views and other APIs.
5. (Actually Step 4 is a part of this step only )Writing a Java code which has JDBC connection for accessing OWB public views and Ecore model as imported java files(Step 3 has been done for this part only). This java code will return an OWB project object(instance of the Ecore model) which will be used in further steps.
6. Writing an Xtend code to do a model to model tranformation from OWB to CWM.
7. Writing an Open Architecture Workflow to combine all the steps in one step which will take the output of java code(step 5) and put it into Xtend Code(step 6) and then will take the output of Xtend code and give it to the XMIWriter(an OAW component) to write an XMI which is actually a CWM Ecore Model instance.
8. Saving above XMI(CWM model instance) to the CWM MDR using Hibernate and Teneo.
In the same way we can extract metadata from CWM MDR and put it into OWB. But the only problem with OWB is that we cannot persist OWB object in OWB repositories as OWB tables are very cryptic and tough to understand. So for that we have used TCL scripts(OMB Plus scripts) to create a project in OWB using OWB ecore instance. You can refer to the above oracle documentation link for TCL scripts.
Let me know if I can assist you if you are working on the same.
You can mail me for any queries. My email id is [email protected].
Thanks,
Deepak

Hi
1. Why do we need to install another standalone HTTP server in a separate home? Where do we use that server?
DA: The separate HTTP server is for the Workflow Monitor, which is not necessary (it has some use cases mind you).
2. To make the OWB work correctly while using ETL features, do we always need to run Workflow Configuration Assistant, because I wasn't able to generate code from OWB editor after building a mapping while Workflow Configuration Assistant wasn't running.
DA: Not necessary, what error did you get? Mappings can be designed, deployed and executed without Workflow. Workflow can be used for orchestrating the the mappings (ie .running a bunch of them in a specific order with others tasks).
3. Whenever I try to save my work in OWB, I get an error , message : Preference.properties (Access is denied). Though it saves my work but I don't understand why I am getting this error. It looks like OWB is trying to access some Property from the Preferences (Tools menu) but can't access.
DA: It sounds like the directory where you have installed OWB does not have permissions for the OS user you are executing it. Is the install user different from the execution user? Either run using the installed user, or change the permissions of the directories (grant the executing user write permissions under all directories under owb).
4. I also get error while closing the Mapping Editor :-
DA. same issue as 3.
Cheers
David

How to use commons.logging in weblogic (8.1)?

Greetings,
I'm trying to use commons.logging framework to manage the logs of my
application. With Weblogic I will use an implementation that works with
weblogic.logging package but with other J2EE products I'll use another
native log implementations or frameworks (for instance, for jboss I will
use log4j).
1) I created a class WeblogicLogger which implements the Log interface::
public final class WeblogicLogger implements Log {
I packaged this class in a jar file with a properties file,
commons-logging.properties, which has the property setting my class
below has the default logger:
org.apache.commons.logging.Log=pt.ptinovacao.weblogic.logging.WeblogicLogger
2) My sample code has the following code:
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
private static final Log log = LogFactory.getLog(
LogTimeStartHandler.class.getName());
something(){
log.info(this.getClass()+" test log");
3) I added the commons-logging jars and my jar with my custom wrapper
weblogic logger in ${WL_HOME}/common/bin/commEnv.sh:
WEBLOGIC_CLASSPATH=
(...)${CLASSPATHSEP}${WL_HOME}/server/lib/weblogiclogger.jar${CLASSPATHSEP}${WL_HOME}/server/lib/commons-logging-api.jar${CLASSPATHSEP}${WL_HOME}/server/lib/commons-logging.jar
However, my loggings still not appear in my weblogic server. Did I miss
something?
thanks,
Pedro Salazar

Did you manage to get this working?
If yes ... what did you do?
I am having the same problem implementing commons-logging with log4j

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

FI implication of common division

Dear ALL
Request for your help
Company has numerous divisions
For billing invoice company wants only a single invoice for materials from all divisions , for common customers
All divisions have been assigned credit control areas
If we create common division what will be the effect on FI / credit control areas
pls suggest ,
Thanks
Anil

if you common div-and cross div in sales doc type settings , i think you can do without in fi/credit control area

Using Common Table Expressions in BO Universe

Hi All,
How to use Using Common Table Expressions(CTE) in BO Universe ?
i created the stored procedure and tried to use it in universe but i'm not able to.
Request you to help me out with this.
Regards,
Ravichandra K

Did you get a chance to look at this guide chapter 7?
[http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_designer_en.pdf]
Bashir Awan

How to use common resource bundle across all the development components ?

Hi,
I am working on SAP NetWeaver Developer Studio - JAVA
How to use common resource bundle across all the development components ?
Description :
I have a requirement of creating a resource bundle (resource.properties) and use that common resource bundle in all the development components.
Can we create a development component (war and ear both) and create only resource.properties in this development component( DC ) and create the dependency of the same DC in all the other DCs ?
Thanks,
Neha

Hello Neha
This question is more NWDS related.
You may have a better chance of someone answering the thread under
SAP Netweaver -> SAP NetWeaver Development Infrastructure (NWDI, formerly known as JDI) forum
Thanks
Kenny

"Using common Division"

Similar Messages

Maybe you are looking for