Using Compressor 4, How do you create a droplet to transcode from final cut files to mp4, mp3 and m4v formatting?

Take a look at this section; it's pretty clear.
Compressor offers settings for each of the output formats you want. (For example, the m4v sttings for Apple Devices.)
Good luck.
Russ

Similar Messages

How can you create a writable PDF document from a PPT presentation ?

How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
Thanks.
B

You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
Open your PowerPoint Document then go to “File” “Print”
Select ‘Adobe PDF” Printer
Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
Default: PDF/A 1-b
Adobe Security: none (change as needed)
Adobe Output folder: Prompt for Adobe file name
Adobe Page size: Letter (change as needed)
Check the following check boxes
View Adobe PDf Results,
Add Document Information,
Rely on system fonts only,
Delete Log files for successful jobs.
Select OK
A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
Hope this will help.
Tiger26

How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

Hi
As my topic says
How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly. In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location.
But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line. No one is looking at the page. A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice. It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
So I would say, fine if you need them or want them there, it's just one word.
I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want. I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have.
I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
You may not experience the same results with your plug-in, but I think it will probably work the same way.
Give it a try and best of luck.

How do you create aligned interactive text boxs in a PDF with the same width and height?

how do you create aligned interactive text boxs in a PDF with the same width and height?
Without free hand creating the sizing?

Assuming by "interactive text boxes" you mean form fields; in Acrobat, make a form field, then copy it and paste. (GIve the pasted copy a different name so they don't genetate the same field feedback.) Now you have two fields of the exact same size. Shift-click or marquee-drag to select both, then right-click and choose a command from the Align, Distribute or Center menu.

Creating a Simple Excel Report from Final Cut Server

1. Modify the following Metadata Group (ASSETLISTVIEW) to contain the field you want to output in your report
2. Create Ruby file. In this example I named mine searchallassets.rb
Be sure to make the file executable, using the following command at the terminal sudo chmod 755 [file]
Copy and Paste this block of code into the searchallassets.rb
--Code Starts Here
#!/usr/bin/env ruby
# Created by Nicholas Stokes
# Copyright (c) 2009 XPlatform Consulting LLC
# All rights reserved
time_file = Time.now.strftime "%Y%m%d%I:%M%P"
FCSVRCLIENTCMD = "/Library/Application\\ Support/Final\\ Cut\\ Server/Final\\ Cut\\ Server.bundle/Contents/MacOS/fcsvr_client"
# What this will do:
# This will create a .csv file that contains all asset records from Final Cut Server database
# If you wish to modify the report further below is the command line syntax for searching the Final Cut Server database
# fcsvr_client search [ --verbose --noheader --mdonly --tabdelim --xml --limit <n> --depth <n> --xmlcrit --crit <str> --ctxaddr <addr> --dirs --linkparentaddr <address> --linkparentrecursive ] <address>
# Note, I am using the --tabdelim option to output the file as a tab delimited file. This will allow for easy importing into Excel or another database management system.
searchfor_allassets = "#{FCSVRCLIENTCMD} search --tabdelim /asset >"
output_file = "/Users/nicholasstokes/Desktop/DickClarkFCSvr_AllAssetsReport_#{timefile}.csv"
runsearch_for_all_export_ascsv = `#{searchfor_allassets} #{output_file}`
--Code Ends Here
Finally. Edit the searchallassets.rb to include the path that you wish to save the output file.
In FCSvr, setup a Script Response to call this.
Then either trigger the Script Response via a Subscription or Schedule.
Hope this helps.
Nicholas Stokes
XPlatform Consulting

http://www.roxio.com/enu/products/toast/default.html?gclid=CIyG7Zqclp4CFdpb2godL HXnkw

TS1233 How do I get chapter markers for iDVD from Final Cut Pro X?

It seems like a tremendous short-coming that Final Cut Pro X doesn't allow for chapter markers that can be used in iDVD or DVD Pro. Surely there is some way to get used-defined markers from Final Cut Pro X or at least re-define the Final Cut Pro X markers in the DVD authoring applications. Does anyone know how to do this?

I have decided to say that my problem is solved by the work-a-rounds that have been submitted. I STILL don't like the fact tha Apple has decided that DVD's are a thing of the past and therefore (chapter) markers are of no use. That may be true is the publishing world of YouTube, Vimeo, etc. but it certainly NOT true for many of us advanced hobbyists that still like distribution on DVD's to our friends or a more localized (private) community -- especially to those who are not computer literate. If Apple wants to exclude us from their customer base, I suggest that base will become even smaller than their competitors who still have chapter markers in their products. I'll get off my soapbox now. . .

Why won't compressor let me submitt the job after sending the job from Final Cut?

Having problems with compressor. Does not let me submitt my job. I sent the job from Final Cut to Compressor. I set up destination, settings. When I hit th submitt button it's grayed out. Can anybody help. I'm running compressor 3.5.3. And Final Cut Pro 7.0.3.

HI do you have Fcp-x, Compressor 4 and motion 5 on your system as well
just need to ask to get that out of the way first
thanks
g

How to up the DPI on exported images from Final Cut

Is there a way to export stills from Final Cut that are 300 DPI, I think they are exporting at 72 DPI?
Catherine

DPI is a measure of density of pixels. It tells us nothing about the printed size of the image (width in inches x height in inches)
A 1200 x 900 image @ 300 dpi yields a 4" x 3" image when printed.
That same size (in pixels) image printed at 100 dpi will yield a 12" x 9" print.
The number of picture elements (pixels) is exactly the same between the two prints but the one in 100dpi image are 3x larger - which will yield a softer image when viewed from the same distance as the 4"x3" 300dpi image.
However, if you view the 300dpi 4"x3" print from 2' away and view the 100dpi 12"x9" print from 6' away - they will appear the same.
Discussions of finding meaning in DPI is difficult without knowing how the final will be viewed.
fwiw - I've made poster size prints at 75 dpi that looked just fine when viewed from 10-12'.
x

How do you convert Flip Video Mino HD for Final Cut?

What is the best way to convert a Flip Mino HD file for use with Final Cut Studio?
Am working in DV/NTSC 16:9

Or use Compressor.
Create a preset for the output settings you'd like, drop in the file(s) and let Compressor via Quickcluster chew away at the material while you do something else.
x

How do you type on a text transition on Final Cut Pro X?

I am having trouble figuring out how to type on the ink splats title. Please give instructions that include where the buttons are, as I am just starting to use Final Cut Pro X.

Move the playhead to where the text appears. Double click on each word to edit the Title and Subtitle separately. You can also click on the words and drag them on the screen to reposition them if necessary. When you double click on the words, you can also alter their respective text properties by going into the Text inspector and changing the available aspects for each text element (like font, size, etc...)
HTH

How do you add old movie count downs to Final Cut Pro X ?

I am trying to make a video from the films that i recorded while skiing, and i was wondering how i would add an old movie count down into Final Cut Pro X, becasue i cant seem to find anywhere that does it.
Thanks for the help guys.

No possible.... You'll need to jot them down manually. Very painful especially if your dealing with a 2hr long DVD

How do you import raw motion video projects into Final Cut Pro X

How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.

share, Export Movie, short cut ⌘-E
in FinalCut: Import File

How do I burn a high resolution dvd from Final Cut

Compressors quality doesn't seem as good as the file that plays on my computer. Please tell me there is a way to get the high resolution I see on my computer onto a DVD. And how do I do it? Step bye step...

Hi
But if You want to do as good as is possibly with iDVD then read my notes.
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

How to Free up Disk Space to export from Final Cut Pro to QuickTime?

I am using Final Cut Pro on a Mac OX10. When I try to export a Final Cut Pro project to QuickTime I get a message saying that I do not have enough disk space available. How do I free up additional disk space? (I am a little confused because I have already deleted more disk space than I am current trying to use)
Powerbook G4 Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)

Might try restarting the computer, just to refresh the system's memory... be sure you empty the trash too... the new space won't show up until you do.
Jerry

How do I save a frame of video from Final Cut X to my computer?

I am trying to save a single frame from my storyline to my computer. I used to know how to do this until they updated Final Cut X and now I can't find the option in the menues anymore. Can anybody please help me?? I am working on a project and I really need to do this!! Your help is greatly appreciated!!!!

Share>Add Destinations. In Destinations prefs there is an option to save a frame. Drag it to the sidebar to make it available as a share option.

Using Compressor 4, How do you create a droplet to transcode from final cut files to mp4, mp3 and m4v formatting?

Similar Messages

Maybe you are looking for