Using Configurator in Win 7 64 bit

The title says it. Will it work with 64 bit PS and Win 7?

I will try it. The download filename had x86 in it, so I was concerned.

Similar Messages

Can i use CC on Win XP 32-bit?

Can i use CC on Win XP 32-bit?
Sacza

Well, Photoshop CS6 will work, and is available as part of your CC membership:
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html
Some other apps will too – see the CC system requirements and CS6 system requirements.

Webutil configuration for win-7 64-bit

i am working with 10g.
i configured webutil for xp , 32 bit
it is working fine...
but my company replacing all the comp in the department and providing win-7, 64-bit.
but my application user will still be using xp, 32-bit.
do i need to configure webutil differently ..?
will same configuration not work here with win-7, 64-bit...?
Edited by: Amoeba on Mar 10, 2012 11:40 AM

Amoeba wrote:
i am working with 10g.
i configured webutil for xp , 32 bit
it is working fine...
but my company replacing all the comp in the department and providing win-7, 64-bit.
but my application user will still be using xp, 32-bit.
do i need to configure webutil differently ..?
will same configuration not work here with win-7, 64-bit...?
Edited by: Amoeba on Mar 10, 2012 11:40 AMDo your application server OS changed ?
It should not be a problem for client OS change.
Hope this will help you..

How to install Oracle RAC using 11gR2 on Win 7 32 bit from scratch?

Hiii,
I am a fresher and I have a win 7 system 32 bit with oracle 11gR2.
I want to install RAC using two or more servers but I dont know too much about it.
I tried to search on google but all they are giving information in pieces(for win 7) or about Linux(Please tell me why its all Linux everywhere not windows).
Please let me know if there any site where I can find step by step installation from scratch.
What are basic requirements(/software if needed).
Thank you.

Hi,
First of all forget about Windows!! Oracle is mainly designed for Linux systems. Oracle runs as real multi-process on Linux machines whereas on Windows it runs as a single process with multi-thread.
Memory usage - huge pages,single CPU run queue, dnfs, storage systems... etc. lots of concepts exists.
Besides Windows is one of the most poorly designed operating systems, you should use it only to watch cute kitten movies on youtube... Believe me, you wouldn't want to learn Oracle on Windows...
So, install virtualbox and then setup Oracle Enterprise Linux on it as a first step... By the way you have to deal with DNS server for release 11.X, RAC, you may start with 10g for now.
ORACLE-BASE has all the installation steps explained detailly, search for "oracle base rac install" on google.
I also explained on my blog, but it is a little bit advanced installation using ZFS storage simulator. DNS server installation is also explained: http://ilkertaysi.com/2013/11/11/oracle-rac-installation-with-zfs-storage/

Re: How to install Oracle RAC using 11gR2 on Win 7 32 bit from scratch?

Hi,
I'd suggest to use the Virtual box(Free download from Oracle) and use the steps mentioned in the link.. for RAC Setup for your practice
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php
HTH

Thank you DK2010,
Your answer was very helpful to me but please tell me why everybody suggest about virtual box? Is is very important? and what is the benefit?
And I was checking that testing that branch option thats why this post become branch of my discussion.

"Connection failed" using smb to Win 7 64-bit shared folder

Hi,
I am a new Mac user and was unable to find any suggestion for a solution to the problem I am experiencing.
I use a folder on my PC to store video files. It is shared and the Mac connects to the address smb://biblioteket. This usually works fine, but sometimes I get a "Connection failed" error message. I connect through a gigbit wired ethernet connection.
Some other characteristics:
- If I restart my PC and reconnect, it works again - every time.
- I can connect to the PC using Teamviewer even if I get the error message, meaning there is a connection between the computers.
- The error will always show up if I try to copy large files from my Mac to the shared folder on the PC. I get a error message during file copying, after that the mounted drive is inaccessible and the "Connection failed" error message appears.
Any suggestions?

Hi,
So I did what I always do to get the error message. I moved about 25 files from the Mac to the PC. Total size was about 5 gb. About half way through, I get the following error message:
The Finder can’t complete the operation because some data in “(filename(.avi” can’t be read or written.
(Error code -36).
So I retry, but this time the mounted drive has disconnected and get the following error msg:
The operation can’t be completed because an unexpected error occurred (error code -41).
This happened with a new user (administrator). Any ideas? Thanks in advance.

11g R2(11.2.0.2)-Not able to connect using SID - Win 7 32 bit

Hi Experts,
I have installed 11gR2(11.2.0.2) on Win 7 32 bit OS.
I am able to start database and listener services without any problem. ORACLE_BASE and ORACLE_HOME variables are set.
I am even able to connect to database using "sqlplus user/pass". (With ORACLE_SID variable set)
However, sqlplus command hangs when I try to connect using SID "sqlplus user/pass@o11gr2".
(No error, after waiting for >20 minutes I have to kill the command.)
=================
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\RDBMS\trace\o11gr2_ora_6352.trc"
- "2012-04-05 09:50:55.846: [ default]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\ocr cannot be opened. error 2"
Following in "C:\Oracle\product\11.2.0.2\dbhome_3\log\machinename\client"
- 2012-04-26 14:35:18.781: [ default][1216]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][1216]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. The system cannot find the file specified.
"tnsping" returns OK for "tnsping o11gr2", "tnsping localhost", "tnsping 127.0.0.1", "tnsping 192.168.0.1"
Output of LSNRCTL:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 26-APR-2012 14:35:17
Uptime 0 days 0 hr. 4 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
Listener Log File C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
Services Summary...
Service "O11GR2" has 2 instance(s).
Instance "O11GR2", status UNKNOWN, has 1 handler(s) for this service...
Instance "O11GR2", status READY, has 1 handler(s) for this service...
The command completed successfully
=================
This was working earlier. One day it stopped working all of a suddent and I am not able to connect using SID till now.
I tried re-installing in different home multiple times. But no luck even after disabling firewall completely.
Any suggest/help is greatly appreciated on this.

------------------------------tnsping-------------------------
C:\>tnsping o11gr2
TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 26-APR-2012 14:54:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = J1009615W7LT.jda.corp.local)(PORT = 1521
))) (CONNECT_DATA = (SERVICE_NAME = O11GR2)))
OK (30 msec)
C:\>
-----------------------------ping-------------------------------
C:\>ping J1009615W7LT.jda.corp.local
Pinging J1009615W7LT.jda.corp.local [fe80::20c9:b748:311a:95e4%14] with 32 bytes of data:
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Reply from fe80::20c9:b748:311a:95e4%14: time<1ms
Ping statistics for fe80::20c9:b748:311a:95e4%14:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>ping 10.60.200.221
Pinging 10.60.200.221 with 32 bytes of data:
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Reply from 10.60.200.221: bytes=32 time<1ms TTL=64
Ping statistics for 10.60.200.221:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\>
-----------------------------C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml---------------------------------
</msg>
<msg time='2012-04-26T14:35:18.855-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:35:26.200-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:26 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:43.204-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:43 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:35:55.952-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:35:55.953-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:35:55 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:37:08.732-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:37:08 * ping * 0
</txt>
</msg>
<msg time='2012-04-26T14:38:34.943-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:38:34 * (CONNECT_DATA=(SERVICE_NAME=O11GR2)(CID=(PROGRAM=C:\oracle\product\11.2.0.2\dbhome_3\bin\sqlplus.exe)(HOST=J1009615W7LT)(USER=j1009615))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::20c9:b748:311a:95e4%14)(PORT=51907)) * establish * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:39:23.627-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>WARNING: Subscription for node down event still pending
</txt>
</msg>
<msg time='2012-04-26T14:39:23.628-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:39:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=j1009615))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=186647040)) * status * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.550-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>System parameter file is C:\Oracle\product\11.2.0.2\dbhome_3\network\admin\listener.ora
</txt>
</msg>
<msg time='2012-04-26T14:54:25.551-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Log messages written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\alert\log.xml
</txt>
</msg>
<msg time='2012-04-26T14:54:25.552-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace information written to C:\Oracle\diag\tnslsnr\J1009615W7LT\listener\trace\ora_11640_3776.trc
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2012-04-26T14:54:25.553-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
</txt>
</msg>
<msg time='2012-04-26T14:54:25.555-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Started with pid=11640
</txt>
</msg>
<msg time='2012-04-26T14:54:25.560-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:26.695-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2012-04-26T14:54:26.712-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2012-04-26T14:54:29.880-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>Dynamic address is already listened on (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=J1009615W7LT.jda.corp.local)(PORT=1521)))
</txt>
</msg>
<msg time='2012-04-26T14:54:29.881-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:29 * service_register * O11GR2 * 0
</txt>
</msg>
<msg time='2012-04-26T14:54:32.090-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='J1009615W7LT'
host_addr='fe80::20c9:b748:311a:95e4%14'>
<txt>26-APR-2012 14:54:32 * ping * 0
</txt>
</msg>
Edited by: 850920 on Apr 26, 2012 11:59 AM

Lightroom uses PC resources inadequately (Win 7 64 bit, core i7 CPU)

Generating standard and full sized previews for a sizeable catalogue can take hours. However, I have noticed that during the procedure the CPU utilization rarely goes above 25% (Win 7 64 bit, Core i7 960 CPU, 3.2 Ghz, 8 virtual cores), and Disk Utilization sits around 15-20% highest active time (in Win 7 Resource Monitor). So what prevents LR from speeding up? Apparently nothing but the intrinsic inefficient coding. If my observations are correct, this is a bug and needs to be addressed. Can anybody confirm?

We have about the same rig:
Win 7/64 Pro, Service Pack 1.
Intel Core i7 980X at 3.33 GHz.
ASUS Rampage 3 Extreme Board.
Corsair Dominator 12GB, PC12800, DDR3, 1600MHz memory.
OCZ 240GB RevoDrive X2 PCI-Express x4 SSD Raid 0, boot drive.
WD VelociRaptor 300GB SATA-3 data drive.
OCZ 120GB Agility 2 SSD Win cache and Lr raw cache drive.
EVGA 768-P3-1362-TR GeForce GTX 460 Dual DVI graphics cards.
HP LP3065, TFT, wide gamut, 2560 x 1600, 30”, main and second monitors.
This has been used since January and Lr is fast, full size previews take less the 1/2 second each to complete, and exporting 4200 JPEG images is completed in 14 minutes. Library to Develop switch time is a bit slow, about 2 seconds, the first time, instant thereafter for the entire session. The spot removal tool does on occasion slow for a few seconds, but recovers completely, again for the session. Everything else has no lag time.
The 2560 x 1600 monitors were initially a problem, slowing everything down, when they were configered properly, everything performed at full speed, all 12 virtual cores are now often over 80%.
Our Win7/64 performance rating is as follows:
Processor               7.8
Memory                   7.8
Graphics                 7.6
Primary Hard Disk 7.9
The above excellent scores were not affected by the initial problem of monitor configeration.
If I were you, a check for the latest graphics card drivers and a check their proper configuration would be the first step. A minimum of 8GB of RAM is recommended. A utility check of all memory and disk I/Os is also a good idea.
Since you did not mention any details of your setup, the above are just general suggestions.
If Adobe's code was your culprit, this community would be the first to know, and few of us would be satisified. Obvioulsy that is not the case.
Good luck

Trying to configure a Win 2003 Server to use TLS server authentication . . .

I am trying to
configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
Method 2: By using the Certificate Request Wizard
The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
You want to request a certificate from an Enterprise Certification Authority.
You want to request a certificate that is based on a template where the subject name is generated by Windows.
You want to obtain a certificate that does not require administrator approval before the certificate is issued.
To obtain a certificate, follow these steps:
Click Start, click Run, type mmc, and then click OK.
On the File menu, click Add/Remove Snap-in.
Click Add, click Certificates, and then click Add.
Click Computer account, and then click Next.
If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
computer, and then type the name of that remote computer in the Another computer box.
Click Finish.
In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
Snap-in dialog box.
Under Console Root, click Certificates (Local Computer).
Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
On the View menu, click Options.
In the View Options dialog box, click Certificate purpose, and then click OK.
In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
In the Certificate Request Wizard that starts, click Next.
In the Certificate types list, click Server Authentication, click to select the Advanced check box,
and then click Next.
In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
I get as far as step 11 and I get the error message:-
The wizard cannot be started because of one or more of the following conditions:
- There are no trusted certification authorities (CAs) available.
- You do not have the permissions to request certificates from the available CAs.
- The available CAs issue certificates for which you do not have permissions.
This is covered in KB 927066 – see below:-
To resolve the problem, follow these steps:
Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
To do this, follow these steps:
Click Start, click Run,
type Dsa.msc, and then click OK.
In the left pane, click the Users container.
Verify that the CERTSVC_DCOM_ACCESS group is in the right
pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
Domain Users
Domain Computers
If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4.
Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
do not have sufficient DCOM permissions.
Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
authority.
Click Start, point to Program,
point to Administrative Tools, and then click Component Services.
Expand the Component Services node.
Expand the Computers node.
Right-click the My Computer node, and
then click Properties.
Click the COM Security tab.
Under Access Permission, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
Remote Access permissions, and then click Cancel.
Under Launch and Activation Permissions, click Edit
Limits.
Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
Remote Activationpermissions, and then click Cancel.
Click Cancel, and then close the Component
Services console.
Settings may be incorrect if any one of the following conditions is true:
The CERTSVC_DCOM_ACCESS group does not exist.
The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
net stop certsvc
net start certsvc
Repeat steps 1 through 3 to verify that all the settings are correct.
Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
The only part of the above instructions which I have not been able to complete is:-
“you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

Hi Nick,
Have you successfully set up an enterprise CA?
If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
Best Regards,
Amy

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

Cannot install drivers in win 7 32 bits using bootcamp 4 or 5

I posted this question yesterday.
anyway, I have a imac midi 2011, 21,5 inches using OS x mountain lion 10.8.2. Manuals say I have to install bootcamp 4, because I install windows 7 profesional 32 bits.
Al follow all this instalation requirements, but when I try to install system say This software is not compatible.
I Downloaded from appel suppor site to PC intel and after I copy the .zip file in a root of USB formatted in FAT 32.
Finally is not possible download any driver. I I want to install an specific driver, is same problem.
I did all this steps but downloading bootcamp 5, and got same results. I understood Bootcamp 5 is only to install win 8 o win 7 64 bit, am I right?
Thanks for your help
Gilberto

To teh best of my knowledge, Boot Camp 5 only supports 64 Bit Windows installations (as it is designed for 64 bit hardware). I dont recall positively, but I believe that Boot Camp 4 supports both 64 bit and 32 bit windows installations, but the installer may default to 64 bit mode. You may have to extrace the drivers and install them manually in 32 bit mode.

Using Win 7 64 bit. Problems w/ Firefox 3.6.6: (1) When I close it, it sometimes closes the window but does not stop operating. Yet, I cannot restart it. Only solution is to use Task Manager to shut it down, then restart it. (2) Will not open certain

Using Win 7, 64 bit. (1) Firefox fails to stop when I close window; only solution is closing it thru Task Manager. (2) Firefox does not allow me to access certain corollary items such as opening emails I receive in online Groupwise and certain videos at websites, such as demonstrations.
== I purchased new computer w/ Win 7 64 bit

'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
This is not a cure but will make it easier if Firefox locks up.

HPOfficejet Pro 8600 does not print the page as shown in WORD. I am using win 7, 32-bit OS.

HPOfficejet Pro 8600 does not print the page as shown in WORD. I am using win 7, 32-bit OS. How do I fix this?

Sounds like the table is to large to fit on a single page. Have you tried using the "Shrink to Page" option in the Print Preview? Depending on your version of Word, my attached picture may not be 100% similar but it should be enough to give you an idea. Here is the option inside the print preview menu:
Let me know if this resolves your issue
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Using Configurator in Win 7 64 bit

Similar Messages

Maybe you are looking for