Using Connect:Direct with SAP

Folks,
Client is using Connect:Direct to transfer the files from one location to another location.There are two table maintained namely T9AOA and T9AOB with Interface id and Unix scripting w.r.t Processing types respectively.
1.I don't think these are SAP standard tables then why they are not named starting with Z or Y
2.How to use Connect:Direct with SAP.
Searched in SDN and google but didn't get any clear information on the above.From google I came to know this is a Product of Sterling Commerce(AT&T).
Hope someone here who used Connect:Direct with SAP can share the info.
Thanks,
Kiran.

Paky,
The existing Design,had some tables which were maintained with required Unix Scripts.In the program we are just fetching that script from the table and building a Unix Command to move the files.There is also a URL using which we can check the status of the files.As I was just using the already existing design,don't have much info on how C:D connectivity can be designed from scratch.
By Googling,I was able to get some info.May be it will give you some lead.
https://www.google.co.in/?gws_rd=cr&ei=F5apUsrYCYWNrQf1y4GoDQ#q=connect+direct+in+unix
K.Kiran.

Similar Messages

I have an HP LaserJet 8150N that I am trying to get connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer.

I have an HP LaserJet 8150N that I use for my work and I have had this printer for ever and it is one heck of a work horse! I am trying to get it connected via ethernet cable directly to my iMac. I always had this printer connected via a network so I don't know if I am able to connect directly with a cable since it is a network printer. I have tried to reconfigure the printer using the JetDirect menu giving it a new IP address but still no luck. If anyone could help me through this issue I would appreciate it.

moonlightcaravan wrote:
Second, seeing "connecting" and connection failed is normal. You must click on "Connect As" in the Finder window and then enter the username and password for the admin account on the other computer. That should fix things.
Thanks for responding.
When does clicking on "Connect As" happen in the process above?
After step six? Seven?
After the connection has failed?
Is this the FInder window that shows the icon of the computer you want to copy the file from?
You should see "Connect As" in the Finder near the top right of the window as shown below:
!http://blog.brothersoft.com/wp-content/uploads/2008/11/howto_copy_files_to_or_from_your_iphone02.jpg!

Can Flex 4.6 connect directly with a MS WCF

Can Flex 4.6 connect directly with a MS WCF without having to use a 3rd party tool like WebOrb. I have several basic httpprotocal wcf services that I want to move to a mobile app with Flex. Any feed back or insight will be appriceated.

The correct answer to this question appears to be that Apple's terms of service *do not* prohibit the loading of swf's on IOS from remote servers dynamically at runtime. They prohibit the loading of swf's that *contain executable ActionScript code*.
I loaded a PPT into Adobe Connect and then retrieved the resultant slide swf's from the Connect server. I took these swf's and loaded them into my iPad app, dynamically at runtime, from a remote server. The swf's loaded and animations played. I made no changes to my code. I'm just using a plain old SWFLoader object.
Loading swf's dynamically at runtime from remote servers into IOS works - if you make the swf's right. How to do that I'm not sure.

Can NI myDAQ ai0 and ai1 be connected directly with thermocouples to measure temperature???

Hi,
I am trying to use myDAQ to realize both temperature measurement and digital output.
By reading this page I have learned that how I can create a task for temperature measurement using thermocouple with a certain NI device.
http://www.ni.com/white-paper/14338/en/
What I found to be really interesting is that when I create a task for myDAQ temperature measurement using a thermocouple when my NI myDAQ is connected with my PC, two AI ports ai0 and ai1 both appears in the create task window!!
I never found any information from NI myDAQ manual that "AI0 and AI1" can be connected directly with a thermocouple to measure temperature without using additional conditioning system. But this window suggests that myDAQ can be used in this way, is it?
I am still trying to do it this way, and I'll post some results here again.
I would be really appreciate if anyone could confirm or disprove my guess. Thank you.
PS:
Attached is the

Attached is the screenshots for "create new task" in NI MAX
Attachments:
1.JPG ‏60 KB
2.JPG ‏64 KB

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Strange behaviour when using connection pooling with proxy authentication

All
I have developed an ASP.NET 1.1 Web application that uses ODP.NET 9.2.0.4 accessing Oracle Database 8i (which is to be upgraded to 10g in the coming months). I have enabled connection pooling and implemented proxy authentication.
I am observing a strange behaviour in the live environment. If two users (User 1 and User 2) are executing SQL statements at the same time (concurrent threads in IIS), the following is occurring:
* User 1 opens a new connection, executes a SELECT statement, and closes this connection. The audit log, which uses the USER function, shows User 1 executed this statement.
* User 2 opens the same connection (before it is released to the connection pool?), excutes an INSERT statement, and closes this connection. The audit log shows User 1, not User 2, executed this statement.
Is this a known issue when using connection pooling with proxy authentication? I appreciate your help.
Regards,
Chris

Hi Chris,
I tried to reproduce your complaint, but was unable to. I didnt use auditting however, just a series of "select user from dual" with proxy authentication. You might want to see if you can put together a small complete testcase for this and open a sr with support.
Cheers
Greg

Have you used Captivate 4 with SAP?

I have tried using older versions of Captivate to create SAP demonstrations and simulations, and wasn't particularly pleased with the output. My employer is happy for me to upgrade to Captivate 4. Before I do, can anyone share their experience of using Captivate 4 with SAP?
Thanks, KristinaWasa

Hi there
I have no clue what SAP actually is. So I'm going to ask that you clarify your request a smidge.
I'm wondering if you are asking if Captivate coexists with SAP so you may record what goes on with SAP?
Or is SAP a delivery mechanism similar to or possibly even a Learning Management System (LMS) and you are asking if Captivate content is easily delivered by and communicates nicely with this system.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

What's the best way to connect Cognos with SAP 4.6c on iseries V5R4

We have SAP 4.6c on iseries V5r4.
What's the best way to connect Cognos with SAP so that data could be extracted from SAP and create reports with Cognos.
Thanks
Joe

DB2 Connect version 8.2 is no longer supported by IBM (support ended April 30, 2009, see http://www.ibm.com/software/data/support/lifecycle/). As far as I know, DB2 Connect is communicating through DRDA, which is a platform-independent protocol supported by all DB2 platforms, so any DB2 Connect client should be able to talk to any DB2 database. However, there may be limitations on the supported release combinations.
Kind regards,
Christian Bartels.
Edited by: Christian Bartels on Sep 6, 2010 4:17 AM

Table relations lost in Crystal Reports when connecting directly to SAP R/3

Currently, we are trying to create reports in CR2008 directly on SAP R/3 tables. We encounter the following problems:
- 1 it is quite difficult to find out which tables you need
- 2 if you import the tables into CR you have to define the relations between the tables again
This takes too much time and is way too complex.
So the question is: should I define infosets and load these into CR? what is the general "working method"/procedure to deal with these issues?

Hi,
in case you not familiar with the tables from your ERP system I would recommend using an InfoSet or ABAP Functions as a source.
ingo

Using fragment library with SAP MIME repository?

Hi,
I am new here so I hope I'm posting this in the right place.
We use Adobe LiveCycle Designer as part of the SAP Interactive Forms product. We want to use the fragment library but I am unclear how that will work unless we can connect to the SAP MIME Repository.
Does anyone here have any experience with making this work?
Also ... is there any online resource (other than SAP's SDN) with specific help documentation for using LiveCycle Designer ES with SAP?
We are on SAP Netweaver 7.01 and LiveCycle Designer 8.1.
Thanks!
MAH

Hi Chintan,
Thank you for the prompt. I was going to get to it ...
Actually I did not find a way to use the fragment library with referenced objects. By 'referenced" we would mean to be able to change the object in the library and all referencing items would be updated. We did NOT find how to do that.
What we did find, that is still useful to us, and probably anyone working in a development team, is that we could create the library in a shared location and store common fragments there. To use the fragments, go to the library, drag the fragment from the library to your form layout, then 'convert to embedded object' (I think this is on the right click menu, Fragments> convert to embedded object).
This way you still get the benefit of consistency amongst forms using the same element, and only having to develop each element once.
I hope you find this helpful!
Margaret

How to use CMS Users with SAP BOPC NW 7.5

Hello,
I have problems importing and using CMS Users with BO PC 7.5 NW.
I am trying two types of CMS-users
1. CMS Enterprise Users created in CMS and using "Enterprise" authentication
2. SAP BW Users imported into CMS using their SAP authentication "secSAPR3")
but both don't work:
In the BOPC Admin Client, I can succesfully select Security->Users->"Add new Users". Both CMS "Enterprise Users" and CMS Users that use SAP authentication are displayed in the "Everyone" Group.
The CMS Enterprise Users are displayed as <username>, e.g. "Miller".
The CMS users with sap authentication are displayed as <SAPSystem><Client>/<SAPusername>, e.g. "KBE100/Smith".
Now If I try to import a user...
1. CMS Enterprise Users
If can successfully import CMS Enterprise Users and add them to the ADMIN Team, e.g. "Miller".
The problem is they can't be used to log in to the Admin Client and Excel Client:
E.g. I enterUser-ID "Miller" and his CMS-Enterprise-password under password after starting Excel Client, an error message shows up: "The UserID, Password or Domain cannot be authenticated. Go back and make sure you entered valid credentials" ... (same error message as if the user wouldn't exist/wrong pw.).
Seems the user wasn't added as BO PC user. Or do I need to use any prefix before the "user ID" for CMS Enterprise users in the User_ID field instead of just "Miller"?!
2. CMS Users which use SAP-authentication (users imported into CMS from BW and use SAP-authentication)
In the BO PC Admin Client, I can't import them: I go through "1. User Setup" select "KBE~100/Smith", "2. User Detail", "3. Assignments", but if I am in "4. Finish" and click on "Apply", the following error shows up:
"Failed to create directory \root\Webfolders\<AppSetName>\<Appname>" for "KBE~100/Smith".
My guess is that the operating system doesn't like the "/" in the Username - but I guess this can't be changed bc. these Users from CMS and are already displayed with the "/" between SAPSystemID~ClientNummer and username in the User-list in BOPC Admin Client!
side remark: if I create a SAP CMS Enterprise user which contains a "/" in the username (on pupose ), I am getting the same error message.
Any help, explanations and workarounds are greatly appreciated - Any solution will be awarded with maximum points!
Best Regards and thanks a lot for your help!

Hi Florian,
The problem seems indeed the file system on the bw not being able to handle "/". The automatic user import from the bw role into the CMC does not give you an option to replace the "/" character with anything else.
This should solve it:
- Go to the CMC double click the user. Delete the server part "KBE100/" and click save. Make sure the default system is set to "KBE100". The user should now be able to login from BPC with the user Smith.
Good luck,
Martin

Using Data Integrator with SAP BI 7.0

Hi,
We're currently using Data Integrator Version 11.7.2.0(using SAP ABAP adapter, BW adapter). Our primary data source is SAP R3 version 4.7 and SAP BW 3.5.
We're planning to upgrade to ECC 6.0(from SAP R3 4.7) and BI 7.0(from BW3.5).
I'm trying to determine if it will be necessary to upgrade Data Integrator also.
Can anyone tell me if Data Integrator Version 11.7.2.0 is compatible with SAP BI 7.0?
any document and advice will help us.
Thanks in advance,
Kyung Woo, Nam

Compatible? Likely.
Supported? No.
We have optimized the BW handling is DI 12.2 a lot, so do yourself a favor and upgrade to this version.

How To Use Connection pooling with j2sdkee1.3?

hi!
How to use javax.sql.ConnectionPoolDataSource and
javax.sql.PooledConnection with j2sdkee1.3.?
In j2ee1.3's deployment tool,
to specify the resource factories,
javax.sql.ConnectionPoolDataSource is not available.
Please Help me to use Connection pooling.
Dhaya.

Vendor implementations usually have a fair amount of optimization. For J2EE apps, my concern would be using your pool in transactional calls. When you make a transactional call across several beans/methods, the vendor's pool makes sure that you get the same connection each time you get a connection from the pool so that if you want to rollback the work (in case an error occurs), you can. Does your current connection pool support this?

Using Data Integrator with SAP ECC 6.0

Hi,
We're currently using Data Integrator Version 11.7.2.3. Our primary data source is SAP R3 version 4.7 We're planning to upgrade to ECC 6.0.
I'm trying to determine if it will be necessary to upgrade Data Integrator also. Can anyone tell me if Data Integrator Version 11.7.2.3 is compatible with SAP ECC 6.0?
I'm sure there is a document somewhere but I have been unable to find it.
Thanks,
Mark Duff

Data Integrator 11.7.2.x is compatible with ECC6. Depending on which platform you're using, here are the documents that give this information:
[Linux|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00aad14-ac3e-2b10-3b85-8208305073b1&overridelayout=true]
[HP-UX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/0075f72d-ab3e-2b10-28bb-9708525a9f42&overridelayout=true]
[Solaris|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d03ba272-ac3e-2b10-9cb0-84156ef467ec&overridelayout=true]
[AIX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2057d8d9-a83e-2b10-a997-e4f31f730524&overridelayout=true]
[Windows|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d069a060-b03e-2b10-3c8c-a59f5f4d8ce3&overridelayout=true]
You should keep in mind, however, that Data Integration 11.7.x mainstream maintenence end date is June 2010. Because of that, you may want to consider upgrading to Data Services XI 3.0 or 3.1.

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

Using Connect:Direct with SAP

Similar Messages

Maybe you are looking for