Using Consumer Digital Camera for the Vision System

I am evaluating, if I can use a consumer digital camera for the vision system. I wanted to see if anybody out there have done that in past? The other question is, do the consumer camera manufacturers provide the driver software in order to retrive the images directly from the camera to the computer ?

I think your suggestion is right, using a firewire camera is much
straightforward. But some consumer cameras have advantages too because
of the very high resolution, especially the newer models of digital
still camera. If the cameras support PTP protocol, then I have a
LabVIEW driver for them. Check out more details at:
http://www.hytekautomation.com/Products/PTPCam.html
Irene He
Bruce Ammons wrote in message news:<[email protected]>...
> You would need a really, really good reason to use a consumer camera
> instead of a machine vision camera. The hassle you would go through
> to get drivers working and get everything else to work the way you
> want is not worth it. You may pay more for a machine vision cam
era,
> but it will work with a minimum amount of effort. Nowadays, the
> firewire cameras are cost effective and you can put together a system
> that doesn't cost much more than your consumer camera would.
>
> Bruce

Similar Messages

Using adobe digital editions for the computer to download books to kobo touch ereader?

from Marcia.
I have a kobo touch ereader. Try to install adobe digital editions. i only access to a library computer window 7. Try to download ADE 3. 0. Installater.exe. No administrative password.
Can you help me. My kobo touch software is 1.9.17. (r37581 3/16/12) model no. N905B27210158.

Hi Jeff and Gibert.. I had the same issue but knew that my system prefs were fine... I found the workaround... just below is a link that will take you to a page to do a manual download... both for Mac and Windows. I did it last night and was able to open my files properly in Adobe Digital Edition. Hope that helps!
Main menu: http://kb2.adobe.com/cps/403/kb403051.html
Mac OS Solution: http://kb2.adobe.com/cps/403/kb403051.html#main_Mac OS solutions
Cheers,
Stephanie

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Pro

I have Video camera movies that are HD format.. I am doing editing work on them using Final Cut Pro, but using DV PAL format for the projects I am editing. When I then tried to copy my work done in FCP Project that's originally DV PAL , into a new FCP Project that is HD, and tried reconnect media with original HD movies (video), the sequence project got distorted for all the text, shapes used and all.. everything changed its orientation and scale.. Is there a way by which I can preserve my work done on DV PAL and switch it preserving its proportions, scale and orientation, but on a HD project sequence?? Appreciate your help and advice..

Yes. A couple of ways that might work.
First Way
What you need to do is load one of your hd clips in the viewer and edit into a new HD sequence. Does it display correctionly?
OK, select the clip in the hd timeline and copy (command-c). Now go to the HD sequence with the material that's distorted. Select all (command-a) and paste attributes (option-v) and choose basic motion and distort. That should maek things work. What won't work is anything that you've adjusted as far as basic motion or distort in your PAL sequence. That I'm pretty sure you'll have to redo.
Second Way.
Choose your original PAL sequence and do a Media Manage changing the sequence preset to the appropriate HD paramenters with the media offline. You then should be able to reconnect these clips with your original HD media.

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

I try to save or delete photos from some SD cards that I use in trail cameras. The cards are unlocked, but only allow me to read files. Also, is it unusual for ad tabs to pop up in Safari every time I click on the tab I am using?

HT4718 What USB Flashdrive can I use for the Recovery System a 4G or a 8G?

What size of drive do I need for the Recovery System? Can I use a USB flashdrive?

If you're talking about just the Recovery HD, you only need 1GB so use a 4GB USB thumb drive and the OS X Recovery Disk Assistant to create it.
If you're talking about the ML installer (installESD.dmg) use an 8GB USB thumb drive.

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

Is it possible to upload photos directly from a digital camera to the Zen Sle

Hello
My girlfriend and I are going to South America. Therefore, I am not only looking for a MP3-player, but also a place to store photos. The Zen Sleek court my attention.
Though, I would like to know whether it is possible to upload photos directly from a digital camera to the Zen Sleek? Does it require any extra cables or software? Or is it only possible to store photos through a ordinary computer and then transfer photos to the harddisc on the Zen Sleek?
Regards
Mads Lyngby Petersen

Short answer, I've never seen anyone try it.
Long answer, it might be possible using one of these USB bridge devices. Some of these devices are supposed to be able to bridge between a camera and a USB mass storage device, and then deal with hosting the connection and moving/copying the files.
I would be intruiged to know if someone's managed it, but as mentioned so far I've not seen anyone mention it.

All of my iTunes music/apps have been deleted, and my iPod is being recognized as a digital camera by the computer. Help?

Hi!
I went on my iTunes today, and it kept saying "
The itunes library file cannot be saved. You do not have enough access privileges for this operation" I restarted my computer and opened iTunes, only to find that all of my apps and songs have been deleted. When I plug in my iPod, it says that this iPod is registered with another computer. My computer, however, is recognizing my iPod as a digital camera, with the name of my father's iPod. I have no idea how to fix this and get all of my songs/apps back. Someone please help!

Check your iTunes version - although your 5th gen works with older iTunes versions, at least 7.4 is required for the IPT - older versions will not even recognize it.
As for the Apple site not working, there have been sporadic reports of that, no known reason, usually resolved in a few hours.
You could also try updating using Apple Software Update (usually found in Start > All Programs), or from within iTunes (Help menu > Check for Updates).
Hope this helps...

Need a Suggestion For implementing the Digital Signature For the Documents

Hi,
Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
Thanks in Advance
Sabarish V

Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
Good luck.
John Dickey

AAT Apple Advanced Typography for the writing systems of world scripts

Thomas Gewecke writes:
If I had to choose one problem which does exist and causes considerable practical difficulties for a lot of people, it would be that lack of full OpenType support in OS X (and the resulting requirement for rare AAT fonts) makes it impossible for Mac users to do everything they might want in a number of important scripts, or to do anything at all in quite a few others.
This is a frequently asked question, so perhaps the simplest solution is to try to support this in a separate thread. It is probably preferable to repeat what Apple has published on the Unicode mailing list on the subject of writing systems in world scripts. A link to a supplier of AAT fonts for lesser languages is included in the references (Bassa, Brahmi, Burmese, Cambodian, Georgian, Inuktitut, Kannada, Laotian, Lepcha, Limbu, Malayalam, N'ko, Osmanya, Sinhala, Tai Le, Tamil, Telugu, Tibetan ...). The most advanced Arabic implementation is Mishafi from Diwan in London - this has earned praise on Typophile. There are several independent software publishers (aside from Apple iWork) that support authoring with AAT Apple Advanced Typography.
According to the Apple Unicode Liason, Deborah Goldsmith, as of OS X 10.2 it is possible for the small type maker to support a writing system in a world script through the optional Apple MORX Metamorphosis Extended tables in the SFNT Spline Font file format. Dropping an SFNT and an input method into the operating system adds the shaping for the writing system. And according to the Apple Unicode Liason, as of OS X 10.4 the optional Apple MORX tables for complex composition and the optional Microsoft GSUB tables for complex composition may peacefully cohabit in the selfsame SFNT Spline Font file (leaving aside the issue of whether this is sound advice, or whether sound advice should say that an SFNT should contain either TrueType or Type 1, either MORX or GSUB - not both in either case).
Hope this helps,
Henrik
References :
http://www.mail-archive.com/[email protected]/msg13047.html
http://lists.apple.com/archives/carbon-dev/2006/Nov/msg00579.html
http://www.xenotypetech.com/
http://www.diwan.com/mishafi/main.htm
http://www.typophile.com/node/16858
http://www.typophile.com/node/18098

Please pardon any speedwriting in the following - it's off the cuff :
From the little I understand about the technical details of the differences between AAT and OpenType, I'd guess AAT to be the superior system, from the user's (or font designer's) point of view.
The issue is the business model. Apple TrueType 2 and Apple ColorSync 2 were developed to provide very, very, very highend character:glyph transforms and colour:colourant transforms in an application-independent manner.
The application model was Java and OpenDoc and while OpenDoc is defunct, as is Taligent, Java within which AAT is embedded is alive and kicking. In the application model the idea was that the small developer did not have to independently do elements outside the scope of the application.
Similarly, a graphics library was available to avoid the problem that PostScript is inherently unreliable as it is a programming model that can be used to extend the PostScript graphics model, causing PostScript programs to crash at critical times.
Software publishers in the nineteen-nineties published software for the standalone personal computer with its suite of standalone software. And the standalone software had its own Application Programming Interface that locked XTensions, Plug-ins and more into one and only one suite.
Adobe did NOT want QuickDraw GX and Adobe still has a 'white' paper in which the company states that the idea of the SFNT Spline Font file format as an application-independent product that takes over large parts of line layout is objectionable.
The pendulum does not stand still, however. In the 1970s there were terminals for time-shared centralised computing. In the 1980s and 1990s there were decentralised 'personal' computers in local area networks with their own storage and with graphic displays and printers.
The growth of instructure, both in terms of distributed networking and in terms of an international character set, permits a blend of time-shared computing and 'personal' graphics computing which was intended e.g. with the Apple MessagePad and with Java (Amelio married the ideas).
Apple bled external and internal developers with the late lamented GX and the application model was ten years ahead of its time. Modern imaging models are founded on the ideas implemented in GX and absolutely NOT on the ideas implemented in PostScript and PDF.
Jonathan Seybold told Apple to do an application for pagination, since an application for pagination is the sine qua non for a composition model, a separation model, and a document model (the Apple Portable Digital Document model).
Apple did not do that as it would have caused increased commercial conflict with Adobe, Quark and Macromedia at a time when hardcopy production was still the high end of the Apple product portfolio, and so while ColorSync survived TrueType as prosumer and pro solution suffered.
Ironically, XTT's developer did manage at one time to make his primary Tibetan font usable in both Mac and Windows environments -- by somehow combining AAT and OpenType elements within it -- but his considerable effort was then torpedoed, I gather, by some (unannounced, as usual) changes Apple made in font implementation in 10.4.
Deborah Goldsmith gave bad advice on the Unicode mailing list, I'm sorry but it was not sound technically. Dov Isaacs, Adobe's technical quality manager, gave sound advice in saying that Type 1 splines and TrueType splines should not be housed in the selfsame SFNT Spline Font file. I read what the Xenotype developer posted, and Apple bungled as Apple has bungled other important things like supporting a decent international default separation for ColorSync. There is no excuse whatsoever - if Apple cannot use Apple software with Apple defaults to do a decent job then Apple needs to find out whether it is working for Apple customers or is working for itself.
I don't know what might be necessary to make it possible for Mac users to employ OpenType fonts for complex scripts, but I can't believe that this goal is simply beyond the capabilities of Apple's engineers. Nor do I understand why Apple seems to keep, well, stalling on this issue.
The answer lies in the document model, not in the internationalisation model or in the SFNT imaging model. I am not an expert on Indic scripts (I don't speak or write any of them), but as I understand the matter Indic calligraphic scripts are simulated typographically using a feature called insertion that splits one character code into two glyph codes for vowels.
This type of typographic simulation does not pose problems if you are authoring with the aim of archiving and accessing hardcopy, since your audience is not interacting with the character string, but if you are authoring, archiving, and accessing softcopy then simulation methods such as insertion and bidirectionality may pose problems.
Specifically, if in the process of producing your softcopy pagination you loose the source character stream and the mapping of said character stream to the reshaped and reordered glyph stream, then you have to try to synthesise the character stream. And the more complex the reshaping and reordering, the less likely you are to get a successful simulation.
This is the issue between Adobe PDF produced from PostScript and Microsoft XPS which retains as well the source character stream as the mapping of the character stream to the glyph stream. Adobe PDF, by contrast, is basically a viewable graphic of the glyph stream - Adobe PDF does not even retain semantics for reshaping of formal Danish typography.
Hope this helps,
Henrik
References:
http://www.freepatentsonline.com/y2007/0136660.html

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

How does one get to use their apple id for the first time?

I registered for an Apple ID, which was successsful, but i can't seem to use it, because everytime i try to use it on iTunes it says I have never used this account before, and directs me to the review option which i select but it does the same thing all over again and I can't upgrade to the latest version, because System Preference is failing to open when I try to open the **** thing

Hi RegoAntony,
I apologize, I'm a bit unclear on the exact nature of what you are describing. If you are trying to use your Apple ID for the first time in the iTunes Store, you may find the following article helpful:
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
Regards,
- Brenden

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Using my digital camera as a webcam

Hi! I have a Fuji S5000 digital camera. Straight outta the box it is capable of being used as a webcam...but only on a PC. It uses a program called PictureHello. I've heard rumors of third party developers creating programs that let MAC users use their digital cameras as webcams as well. Anyone know if there may be such a program or where I may find it? Any guidance is appreciated.
Thanx!
466 Mhz Digital Audio G4 Mac OS X (10.3.5) 30 GB, 640 MB RAM

Dave,Welcome to Apple Discussions.
iChat in Panther allows the use of any camera with a Firewire connection. This little piece of software says it allows you to do the same with any USB camera (which I assume yours is).
HTH
mrtotes
P.S. MAC = Media Access Control, you are using a Mac.

No maintenance cycle is open for the current system

Hello!
I have problems to use CharM functionality due to following error:
<b>No maintenance cycle is open for the current system</b>
The error arises when I try to set a urgent correction in status "In Development" I get the following error, menwhile I have an valid maintenance cycle active.
I use CharM functionality for the solution consisting of an single system with two clients:
SRM:000 (as DEV-system) (system role: source system)
SRM:100 (as PRD-system) (system role: target system)
- No maintenance cycle is open for the current system (meanwhile I have a valid maintenance cycle created and activated).
Futhermore I get the additional warning:
IBase component is not a productive system in system lanscape
Can some help me with this issue?
Thank you very much!
regards
Thom

Hello Kriti,
thank you very much for your response.
Unfortunately I also thought about it.
Basically my CharM procedure looks as follows.
I send the message from productive client (I have only one system with client 000 and 100) to Service Desk in SOLMAN.
There I can see the IBase of the productive client.
Then I create a urgent correction by assigning IBase to this IBase of productive client. It is also possible to change the IBase in change mode, so I have tried all the possible values of IBase and get the same error.
My problem also is that I have multiple values of IBase assigmenets, it means one system has multiple assigments to IBase components.
I do not know how to delete/cut these settings....
Thank you for your further help!
regards
Thom

Using Consumer Digital Camera for the Vision System

Similar Messages

Maybe you are looking for