Using Content / Structure Copy Breadcrumbs not displaying properly

Hi:
MOSS 2007 SP2. Have some users who created some content on a test site and wanted to move it to a prodution site (same collection) and it appeared that everything is fine, only the breadcrumbs on the content pages copied over do not show properly or not at all.
Is there a way to refresh the breadcrumbs on content pages that have been copied to reflect the new URL?
Thank you
Chuck

Hi Chuk,
I am facing the same issue.. :(
Are you able to fix this issue.
Please post the solution if able to fix it!!
Thanks in advance!!!
Naresh

Similar Messages

We want display image by using plsql but image is not display properly

DECLARE
p_dir varchar2(100):='/prd/rcms/test/bala_test/';
p_file varchar2(100):= 'sam.png';
dest_dir varchar2(100):='/prd/rcms/test/bala_test/';
dest_file varchar2(100):='test_image.html';
dest_handle UTL_FILE.file_type;
p_clob CLOB;
l_bfile BFILE;
l_step PLS_INTEGER := 2074;
v_string varchar2(4000):='';
BEGIN
dbms_output.put_line('Encoding starts');
l_bfile := BFILENAME('BFILE_DIR', p_file);
dbms_output.put_line('File is going to open');
DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
FOR i IN 0 .. TRUNC((DBMS_LOB.getlength(l_bfile) - 1 )/l_step) LOOP
dbms_output.put_line('Inside encodeing');
p_clob := UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(DBMS_LOB.substr(l_bfile, l_step, i * l_step + 1)));
p_clob := p_clob||v_string;
dbms_output.put_line(p_clob||'<------------- '||i);
END LOOP;
dbms_output.put_line('Base64 encoded');
p_clob:= '<img src="data:image.png;base64,'||p_clob||'" width="32" height="32">;
dest_handle := UTL_FILE.fopen(p_dir, dest_file, 'w', 32767);
UTL_FILE.put(dest_handle, p_clob);
dbms_output.put_line(p_clob);
DBMS_LOB.fileclose(l_bfile);
dbms_output.put_line('Encoding ends successfully');
exception
when others then
dbms_output.put_line('Error : '||SQLERRM);
end;
/

972021 wrote:
DECLARE
p_dir varchar2(100):='/prd/rcms/test/bala_test/';
p_file varchar2(100):= 'sam.png';
dest_dir varchar2(100):='/prd/rcms/test/bala_test/';
dest_file varchar2(100):='test_image.html';
dest_handle UTL_FILE.file_type;
p_clob CLOB;
l_bfile BFILE;
l_step PLS_INTEGER := 2074;
v_string varchar2(4000):='';
BEGIN
dbms_output.put_line('Encoding starts');
l_bfile := BFILENAME('BFILE_DIR', p_file);
dbms_output.put_line('File is going to open');
DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
FOR i IN 0 .. TRUNC((DBMS_LOB.getlength(l_bfile) - 1 )/l_step) LOOP
dbms_output.put_line('Inside encodeing');
p_clob := UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(DBMS_LOB.substr(l_bfile, l_step, i * l_step + 1)));
p_clob := p_clob||v_string;
dbms_output.put_line(p_clob||'<------------- '||i);
END LOOP;
dbms_output.put_line('Base64 encoded');
p_clob:= '<img src="data:image.png;base64,'||p_clob||'" width="32" height="32">;
dest_handle := UTL_FILE.fopen(p_dir, dest_file, 'w', 32767);
UTL_FILE.put(dest_handle, p_clob);
dbms_output.put_line(p_clob);
DBMS_LOB.fileclose(l_bfile);
dbms_output.put_line('Encoding ends successfully');
exception
when others then
dbms_output.put_line('Error : '||SQLERRM);
end;
/You are trying to output a clob using UTL_FILE.PUT which takes a varchar2 parameter, and thus has a limit of 32767 bytes. That could be problematic unless you know you are outputting less than 32K, in which case you should just store your data in a varchar2 in the first place.
You could use multiple UTL_FILE.PUT statements in a loop outputting up to 32767 bytes at a time, though you have to flush the UTL_FILE buffer to ensure you don't exceed 32K before flushing.
Alternatively, you can output CLOB data using some other techniques such as...
DBMS_XSLPROCESSOR.clob2file(
cl => p_clob
, flocation => p_dir
, fname => dest_file
);However, it's not even clear if that is causing you a problem, as we don't have your data
And for gawds sake, get rid of the stupid exception handler:
exception
when others then
dbms_output.put_line('Error : '||SQLERRM);

Web page not displaying properly - content in wrong place

It's been years since I've done html and this is the first time using Dreamweaver. All my pages have the same header then a horizontal row of link buttons. I have used Divs to create 3 sections of content underneath this. Each div has the following defined for it: #Div { position:absolute; width:913px; height:440px; z-index:1; left: 10px; top: 302px; My main page is not displaying properly. There is a section on the left with text/photo. To the right of this section, there is a second div containing an image map. In Dreamweaver, I preview the page (using Chrome) and it looks fine. However, when I upload it to the web site and then view that page in the web site, the second div is thrown to the upper top right of the page. I do not know what is causing this and how to fix it. Can anyone answer this and perhaps give me some tips?

Start by fixing your HTML errors. You have a significant number of them.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fgivethegaveltotavel.com%2F
Also, you have some CSS errors.
W3C CSS Validator results for http://givethegaveltotavel.com/ (CSS level 2.1)
Position:absolute is never a good way to layout your web pages. For 98% of what you do, positioning is not required and should be avoided. Learn to use CSS margins, padding and floats to align elements where desired.
CSS margin property.
CSS padding property
CSS Float
Nancy O.

Lately pdf files from the Web do not display properly; what is wrong and how can I fix it so I don't have to use IE?

I am a professor and frequently need to open pdfs of academic journal articles from electronic databases. Within the last two or three weeks, when I try to do this using Firefox, only the first page of the pdf displays and the rest are blank. In addition, a bar appears across the top with the message "This pdf file may not display properly." So I have had to switch to Internet Explorer to open the files and do my research. What is going on and how can I fix it so I can open pdf files from the Web in Firefox and have them display properly?

My question is simple - why would you put an application in production that has a lot of bugs? To replace a good and steady Adobe product? My customers will believe that I put a pathetic fallible form online. They are not sophisticated on computers so I just tell them to use IE. Ugh
I must agree with pgwebgirl!

Why is my youtube webpage not displaying properly?

My youtube webpage is not displaying properly. its like tthere is only text and thumbnails and the whle webpage is too damn long. The videos don't play when clicked. Problem on both firefox and chrome. I disabled kaspersky av but it didnt make any difference cuz i thought the firewall mustve been blocking something. check screenshot attached.

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

PDF not displaying properly in Acrotbat

Hi all,
I'm having an issue with a document I have created in Photoshop not displaying properly when opened in Acrobat. It is a brochure for my work, that I have worked on and printed many times. When I open it in Acrobat after creating the PDF, gaps appear and other elements are shifted out of place. When viewing it in Photoshop, those gaps are not there, even when I zoom in very close. When we open the file on other computers with Acrobat, the gaps are still there. To test the PDF further, I downloaded some free PDF viewers off the net and the document looks the way it was created, the way it should be. I don't know how to fix it and certainly don't want the gaps appearing when it goes to print. Any ideas on how to fix this? I've never previously had this problem. Thank you in advance for your help.
Leah

Without access to the files it's impossible for us to help. Acrobat will be displaying the PDF "correctly", but why the page contents are shifted is anyone's guess.
When you save as "Photoshop PDF" and choose the "Preserve Photoshop Editing Capabilities" option, it embeds a copy of the PSD file into the PDF and will open that whenever you try to open the PDF in Photoshop, which is why you don't get the import dialog. Photoshop never even reads the PDF page contents. Turn off that option, save to PDF again, and then open it in Photoshop - you'll see the true PDF page being imported as a graphic, and it'll match what Acrobat is displaying.

Page will not display properly with inline Frames

I have a html page that will not display properly in Dreamweaver. I have a basic understanding of html and want to be able to edit a website in Dreamweaver that was given to me. It looks fine in a browser, but in Dreamweaver some of the content is missing and displays the following message, "Your browser does not support inline frames or is currently configured not to display inline Frames". I was able to open it without any problems using Microsoft Front Page, so is it possible to view and edit it in Dreamweaver?

Without seeing your page, I'm guessing that your page contains server-side includes, iframes and scripts to other files on the server that populate page with content on the server's end. You can't see it in DW because you don't have all the files in your DW local site folder. You said this views fine in FP. Was your page created in FP with FP proprietary tools?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Pages not displaying properly in Publisher instances as we activated the page from Author

HI All,
Pages not displaying properly in Publisher instances as we activated the page from Author. In author it is working well but in Pulisher it is showing first 2 lines of the page and then showing error as
Apache sling/2.2 Hot Spot ****** Sun OS error
Please help me on this.IS this issue with the templates or components are we using?

Ok, then let's go the long way and try to reduce the number of possible root causes:
1) Is your problem reproducible on this publish? (I suppose it is)
2) Is it reproducible on other publishs as well, which have received the same page with the same application?
3) Can you reproduce it on other replicated pages as well?
4) When you upload a page to such an affected publish via a content package, does this page render correctly?
5) Does this problem appear on other environments as well?
6) Do you use dispatcher when you get this result? Or do you get it when you request the page directly of CQ5?
7) What's the HTTP statuscode when you render this page? You can see it in the request.log of CQ5.
If you change logging via Felix Console, you don't need to restart the instance.
kind regards,
Jörg

Metadata not displaying properly in movie list view 12.1.0.50

Has anyone had issues with metadata not displaying properly in iTunes iTunes 12.1.0.50?
Seems since the last update or maybe even before that the metadata is not displaying properly in the movies/list view window. All seems fine in the movies window with the display, nice art work along with all the metadata which I've been adding with the Subler app. Been using this app a long time and it has always been fine.
As can be seen in the attached screen shot, the titles of the lower entries are missing and the director information shows where the artists should be.
When I got to get info everything is as it should be. Any solutions out there?

I had been experiencing this very same problem, and it drove me crazy. Luckily, after searching for the answer on multiple forums, I found a solution. MetaX is a program designed specifically for tagging iTunes movies. Not only can you manually input all the required information, but you can also automatically input all the information from outside sources from within the program. It worked beautifully for me with my copy of Donnie Darko, which I ripped using HandBrake.

ProRes footage not displaying properly in AE CS5 at 8bpc

Just installed AE CS5 and am frustrated to find that Apple ProRes 422 footage (all flavors: HQ, SQ, LT, 4x) does not display properly when the project is in 8bpc mode.
In 8bpc mode:
Same frame, in 16bpc mode:
This behavior does not occur with Uncompressed 10-bit Quicktimes. Only ProRes.
Obviously now that CS5 is 64-bit aware, switching to 16bpc mode isnt as much of a problem as it was in previous versions, but I often like to work in 8bpc mode for speed/performance reasons, so its a bummer that I cant do this with ProRes sources.
Is there a workaround for this (other than working in 16bpc all the time, of course)?

Hi. This is Dan R. from the After Effects team. I'm out of the office for the few weeks, so please excuse me if I don't respond as quickly as I should.
I'm not discounting what you're experiencing, but the behavior isn't typcial. On my machines, ProRes is working properly at all bit depths. Off the top of my head, I suspect a 3rd party Quicktime codec conflict. Regardless of what is causing your problem, we're committed to making sure this works correctly.
Do you have Final Cut Pro installed? Do you have any other 3rd party QT components installed? e.g., AJA, Blackmagic, Sheer, etc.
Please try the following:
Navigate to your Quicktime codec folder. It's found at harddisk/library/Quicktime and harddisk/username/library/Quicktime. Try dragging the entire contents from these two locations into a temporary location. I use a subfolder on my desktop. e.g. username/desktop/QuicktimeTemp
Restart After Effects and try using ProRes footage in all bit depths again. Does your problem go away? If so, it's likely an issue with one of the codecs that you have removed. You now should have enough information to isolate the codec that's causing your problems.
Dan Ramirez
After Effects
QA Engineer

My.yahoo homepage is not displaying properly all of a sudden in windows 8

I don't think there was a change to my system unless it was a windows 8 update recently but my homepage, my.yahoo.com which I have been using for years is not displaying properly in Firefox oth 17.0 or beta release.
It works fine in chrome and IE on the same system.
Is this a issue with yahoo or Firefox? Any ideas on how to fix?

When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove your yahoo.com cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

My vertical Spry is not displaying properly in IE 8

I am working on my first website using Dreamweaver CS4 and my spry is not displaying properly over my flash photo gallery. It looks ok in Firefox (although the borders are missing on my submenu for "sheds tool list") but in IE 8 the submenus can't be seen. How can I correct this?
My website is www.toolshedstudio.com
Here's my css:
@charset "UTF-8";
/* SpryMenuBarVertical.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, a fixed width box with no margin or padding */
ul.MenuBarVertical
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    cursor: default;
    width: 10em;
    border-top-style: none;
    border-right-style: none;
    border-bottom-style: none;
    border-left-style: none;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are same fixed width as parent */
ul.MenuBarVertical li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 170px;
    border-top-style: outset;
    border-right-style: outset;
    border-bottom-style: outset;
    border-left-style: outset;
    border-top-width: thin;
    border-right-width: thin;
    border-bottom-width: thin;
    border-left-width: thin;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarVertical ul
    margin: -5% 0 0 95%;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    position: absolute;
    z-index: 1020;
    cursor: default;
    width: 8.2em;
    left: -1000em;
    top: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarVertical ul.MenuBarSubmenuVisible
    left: 0;
/* Menu item containers are same fixed width as parent */
ul.MenuBarVertical ul li
    width: 8.2em;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Outermost menu container has borders on all sides */
ul.MenuBarVertical
    border: 1px none #CCC;
/* Submenu containers have borders on all sides */
ul.MenuBarVertical ul
    border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarVertical a
    display: block;
    cursor: pointer;
    background-color: #000;
    padding: 0.5em 0.75em;
    color: #CCC;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarVertical a:hover, ul.MenuBarVertical a:focus
    background-color: #33C;
    color: #000;
    font-size: 100%;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarVertical a.MenuBarItemHover, ul.MenuBarVertical a.MenuBarItemSubmenuHover, ul.MenuBarVertical a.MenuBarSubmenuVisible
    background-color: #33C;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarVertical a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarVertical iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarVertical li.MenuBarItemIE
        display: inline;
        f\loat: left;
        background: #FFF;

Hi
You flash movie doesn't have the parameter wmode=transparent. If you set that, the menu bar will be on top.
<param name="wmode" value="transparent">
I hope this helps.
Ben

Images not displayed properly

[Migrated from the Syclo Resource Center]
prashanthi_vangala   01/03/2012 06:44,
Hi,I am working on Agentry 5.4.0I have a list screen where for one of the columns I have a rule to display images ( I use checked and unchecked images ). Earlier the images were getting displayed properly on the ATE but it is not working now and I did not make any changes to the image properties then.But after this, I tried couple of things with the image properties to make it work, like when I do not use any mask colour the image does not get displayed but when i use any maks colour the image gets displayed but its completely blacked out ( and thus for checked image, cannot see the check mark and its completely blacked out ).I face same issue with the login image as well. I added a new Image ( Logo ) to my App for the login Screen, but even this image does not appear on the login screen.
I also tried deleting the Dev folder and re-publishing, but even this does not work.
-Prashanthi
Jason Latko   01/03/2012 11:42
Try deleting the Application directory under your development server where the images reside and publish again.
Completely clear your ATE and transmit again from scratch.
Also, what mask color are you using?
Try using a green hugh and not black or white for the mask.
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/03/2012 12:38
Hi Jason,Thank you for the reply.I already tried all the things you have mentioned, but the same issue exits still.
Prashanthi
Jason Latko   01/03/2012 12:40
Is it just the ATE, or do you have the same problems using the WIn32 or PPC clients?
Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/04/2012 06:21
Hi Jason,Behaviour in ATE:I have changed the image now and tested with the new image . Now, its behaving strangely:When I do a sync after publishing or a reset of ATE; I see the new image properly displayed on the screen but when I leave the screen and come back to the same screen again, the new image is getting replaced by the old image ( atleast the old image is not displayed properly, it appears like a black square box..and because of the same issue I had with this image I switched to the new image ). Behaviour in Win32 Client:When I tested with the client, I see the new image properly for the first time and when i leave the screen and come back the image disappears..This is the behaviour in client.
Please suggest.
-Prashanthi
Jason Latko   01/09/2012 11:35
Prashanthi,What did you use to create these images?
They are simple bitmaps I assume?
Try creating some very simple images using Microsoft Paint, then set a mask of green in Agentry.
Your problem sounds familiar, but I can't find a matching bug in our database.
Maybe someone else has experienced this?
You could also try upgrading to a newer version of Agentry to see if the problem goes away.
We are currently on version 6.0.4.Jason Latko - Senior Product Developer at Syclo
prashanthi_vangala   01/11/2012 10:02
Hi Jason,
Thank you for the reply.
But strangely, from past few days I see that the image is working fine again.
But kept this topic open because it was wierd, that the image is working correctly again without making any major change. What I did was to just write the rule again which calls the image ( though i did this before and did not work then but worked now ) and to observe the image behaviour for few days.But it seems like it is fine now.
Thanks and Regards,Prashanthi

We am using "jv:imageButton" tag for displaying the image and below is the tag code,
<jv:imageButton styleClass="buttonStyle"
selected="true"
onclick="networkCanvas.setInteractor(clientSelect)"
image="../oracle/communications/inventory/ui/images/arrow.png" buttonGroupId="interactors"
rolloverImage="../oracle/communications/inventory/ui/images/arrowh.png"
selectedImage="../oracle/communications/inventory/ui/images/arrowd.png"
title="#{inventoryUIBundle.SELECT}"
message="#{inventoryUIBundle.SELECT}" />
The able code is present in the below path,
..\public_html\oracle\communications\inventory\ui\network\page\NetworkView.jsff
The images are present in the following path,
..\public_html\oracle\communications\inventory\ui\images\zoomrecth.png
I am not thinking this is a Platform Beta 3 uptake issue. And I am suspecting an issue with integration of ilog with ADF. Any help in this regard would be helpful.
regards,
Chandra
Edited by: user638992 on Feb 25, 2010 3:40 AM

Ads are not displaying properly in Safari, v 4.0.5

I am having an odd problem with display ads from our local newspaper not displaying properly on my Mac Pro in Safari. I suspect that the issue might be related to having had some AdBlock app on my system a few months ago. I removed the app and some ads display, but others are just a white block with nothing inside. Is there any way to figure out why the content doesn't load?
The website is http://www.echopress.com
The ads I'm having issues with are the 300x250 ads in the right 3rd column, located directly below the weather info and above the "marketplace" ads.
Any ideas or troubleshooting tips?
Thanks,
Grady
Oh, why do I wanna see em in the first place? I'm an advertiser on the site and would like to see my own ads load occasionally.

Hey ho, Grady!
I can see all the ads on the right,
with the exception of the very top (first) box
which has the header of "Weather Alerts).
It's blank, and I'm assuming you have no alerts at the present.
All the rest of the paid for ads show.
So, what I would do is clear my Safari cache, history, and
in Preferences>Security, clear all the cookies from that site.
Hope this helps.
If you need more info just holler.
Let us know how you're doing, OK?

Elements Organizer 8 - some WMV are not displayed properly in the Play Video but are in Play Vide

Hello:
Elements Organizer - some WMV are not displayed properly in the Play Video but are in Play Vide on Full screen. What's the problem? Wrong codec?

Because WMV's can contain a lot of flags, like DRM, they can exhibit odd behavior, indeed.
Usually, AV files will display in their native resolution, i.e. in their set Frame Size/Aspect Ratio and with their set PAR (Pixel Aspect Ratio), but sometimes those flags are missed, or are altered by other programs.
Remember, WMV's are designed to be streaming delivery-only, and are not intended, or designed to be edited. Most NLE's (Non Linear Editors) will allow them to be edited, but will require extra processing to do so. As is mentioned, WMM is designed around editing that delivery-only format, but most others are not.
There are many other formats/CODEC's, that ARE designed to be edited by the vast majority of NLE's, such as DV-AVI Type II's.
The best workflow is to NOT bring WMV's into the mix, unless one is using WMM exclusively. Converting those to an easily editable format/CODEC will always be the best course of action.
Good luck,
Hunt

Using Content / Structure Copy Breadcrumbs not displaying properly

Similar Messages

Maybe you are looking for