Using Continuos Printing stationary with smart forms is that possible ?

Hi All,
there is an instance where we have to use continuo's stationary for printing Payment Advices for the vendors with bankers cheque attached to the payment advise is that possible in smartforms also i have know that is possible in scripts but the requirement is in smartforms and can we do that in Smartforms.
If any one have seen the same instance earlier, take your time to guide me the process.
Thanx all in advance..
Raj

With smart forms i have dropped the idea as it is not that flexible as script..
if am not wrong~
I have resolved it and have done the needful for printing the cheques and Payment Advices... in scripts with any kind of printer.. using Scripts.
Any one dealing with FI ABAP having any kind of issues with the Payments advices and cheques can always ping me for any doubts...
payment advices ,
cheque printing,
vendor aging,
customer aging,
brs upload program,
Service tax reports,
TDS reports,
vendor master upload,
customer master upload,
gl balance upload,
NCR Report,
and some co Reports..
these are some of the things where i have masterd for now..
any one i need of these can always get in touch...
cheers and all the best.. to be a brilliant ABAPER...
Raj ([email protected])

Similar Messages

Use of NACE after creating print program n smart form

Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
Please help me out.Its urgent.
Thanks & Regards,
Santhosh.

Hi Santhosh,
Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
Goto NACE
Select application V1 and then click Output Type.
create a new Output type or copy the existing one abd save it with new name
then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
In Smartform mention your SMartform name and also the layout if u have ceated.
Again go to NACE and Select application V1 and press Procedures.
here out of the many procedures u have to select the right one and attach your Output Type to it.
You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
Hope this helps.
Reward Points if useful.
Thanks.

Replacing Adobe forms with Smart Forms for printing FPM based forms

Hello All,
This pertains to HCM Process and Forms with Floor Plan Manager (FPM) based forms.
SAP has provided Adobe Forms as the standard print option for FPM based forms, as can be seen in the attached screenshot.
We want to use the FPM based forms without using Adobe Document Services (ADS). I am checking the feasibility of replacing the PDF forms with Smart Forms, either through configuration or customization.
System Landscape: ECC 6.0 EhP6
Any inputs or suggestions would be greatly appreciated.
Regards,
Arun.

Hi Ketul,
Irrespective of the process or scenario, we would like to use Smart Forms instead of Adobe Forms. As seen in the screenshot, SAP has provided the default option of generating a PDF form. This requires installing and using Adobe Document Services. We would like to remove this dependency on Adobe Document Services.
Instead, we would like to use Smart Forms for printing purposes.
This requirement is not tied to any specific process or scenario, but to any business process implemented using HCM Process and Forms framework.
Let me know if you need any further clarifications.
Regards,
Arun.

How to print bullet in smart form

Hi Experts,
I have a requirement in smart form where different points of texts should come under a bullet.
Can you please tell me how to print bullet in smart form.
Note : I have to use Standard text
Thanks in advance
Bikas

hi
good
We can create bullets in smartforms.
For this change the editor to text editor and then
goto insert->characters->SAP Symbols and select the
symbol you want.
This may help your requirement.
You cannot see the bullets in print preview, it'll
appear only on a hard copy.
reward point if helpful.
thanks
mrutyun^

Print portrait orientation smart forms zebra printer

Hello,
I have designed a label with smart forms. The dimensions are the following: width = 11 cm. Height: 15 cm. The label has been designed in portrait form but the zebra 105 SL printer print it in landscape format. Does Anybody knows how to fix this problem ?
Thank you.

Hi,
You didn't check your printer settings in Printers and Faxes in control panel. It cannot happen the way you say.
Feel free to revert back.
--Ragu

How to Printe Graphics in Smart-Forms

Guys,
Need your help
Is it possible to print graph in smart form???
If yes, if you have any document, please pass it to me
Dhiraj

Hi Ram,
Go through this hope u can understand.
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
/:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
Reward points if help ful.
http://www.sap-img.com/ts001.htm
Sorry i think for Scripts ..
better to go for above post . it definetly works
Thanks
Naveen khan
Message was edited by:
        Pattan Naveen

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Passing printer name to smart form

Hi,
How to pass more than four characters printer name to smart form function module name. Please help me. I will give points.
Thanks.

Hi,
Thanks for your reply but there I can pass maximum four character printer name but my case printer name contains 12 characters. If I pass 12 characters printer name it is considering first four characters and it is displaying printer name is not found. So please tell me how to pass more than four characters printer name.
Thanks.

My iPad 2 used to printer flawlessly with airprint printer.

My Ipad 2 used to printer flawlessly with my Canon airprinter printer. It no longer recognizes the printer. I've shut down both the printer and iPad 2 and it still does not work. Any suggestions? BTW, printer works fine with computer wirelessly.

For troubleshooting:
Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
Turn on WiFi router
Wait 30 seconds
Turn on printer
Wait 30 seconds
Turn on iPad
Try to print.

Why can I not use a secon screen with PSE12, as it was possible up to PSE10?

Why can I not use a secon screen with PSE12, as it was possible up to PSE10?

Go to the editor preferences>general and turn on Allow Floating Documents in Expert Mode and see if that helps.

How to use Multiple Logos in One Smart Form?

All,
I have a client where they will have 2 logos for, e.g. "Invoicing" and want the form to decide which logo to print (based on plant code).
We are using Smartforms.
They want to use one form and based on the plant code - the form should determine which logo to print in the upper left corner of the invoice - how do you do this?
This is not like having text to print on the form in the same place - my understanding is the logo is NOT some variable you can "clear" in the program and then use the logo you wish to show up on the printout.
Does this have something to do with using multiple layouts within the same form? You define a layout for each logo and then within the Smartform logic determine which layout to print? And if that is true - does someone have sample code of how they determined which layout to use?
Thanks - and as always - points rewarded where helpfull!
Scott

Hi Scott,
Create two Graphics in Smartform window & place them wherver you want in the smart form.
Now in Graphics node, you can find 'Conditions' tab, under this you can give the conditions.
Hope this clue wil help you
Regards,
Sujatha

How to use loop inside table in smart form

Hi All
i have to use page break at the end of each pernr. i got table in smart form and print cells on event on sort begin. it is working ok . i have an other itab in as well .which i want to the same page with respect to the pernr no.
but the problem is as i loop the 2nd itab. it prints all the record what it has.
e.g i have two pernr 54 and 55.
the records of itab1 prints on page1 and page 2 properly. now i loop at itab2 it also have relevent records of above said pernrs. but i m unable to control those pernrs and loop print all the records on both pages.
if u get some thing out of it kindly help me
Regards
ammad

hi,
Place the second loop ie. itab2 inside the first loop of itab1. And in the conditions tab of looping itab2 give the condition for checking the pernr.
try to implement this logic.
loop itab
at new pernr
    new-page
endat.
    loop at itab2 where pernr eq itab-pernr.
   endloop.
endloop.
revert back for further queries.
regards
Rajitha.

Problem with Smart Form ('RLE_DELNOTE')--Please Help

Hello,
I am facing a problem in the smart form.
So far I am printing certificates (QM module) for the finished goods. i.e. first level batches. Now I should incorporate down level batches info also. i.e. semi finished goods info (second, third... level batches). I am not aware of how to find out the semi finished goods info of a finished good. Each finished good may have one or two levels of semi finished goods....The print program i am using is 'RLE_DELNOTE'.
Can any body suggest me what i have to do?
I have tried with FM 'CHVW_BATCH_WHERE_USED_LIST'. But is of no use.....please tell me...
Best Regards,
Shekhar

To check to see if you have an OpenGL problem:
In Photoshop choose Edit - Preferences - Performance.
Is [ ] Use OpenGL Drawing checked?
If so, uncheck it.
Close and restart Photoshop.
Does the problem persist?
If so, you probably can correct it with a video driver update.
Don't forget to go back and re-enable Use OpenGL Drawing.
To update your video driver:
Right-click on your desktop and choose Screen Resolution.
In the dialog that comes up, choose Advanced settings.
Click the Adapter tab, if it isn't already current.
What Adapter Type is listed? Note the brand and model.
If it is an ATI model, visit this web site:
http://support.amd.com/us/Pages/AMDSupportHub.aspx
If it is a nVidia model, visit this web site:
http://www.nvidia.com/Download/index.aspx?lang=en-us
Follow the instructions to choose the proper card and operating system.
Download and install the latest drivers for your hardware.
-Noel

How to use check box & dropdownlist in smart forms

can anybdy explain(any examples) how i can use check box or drop down list in smart forms.is ther any provision like that

Hi Ranjith,
To use Check box in smartform do the following:
Change the editor to 'PC Editor' and take the menu.
in text editor of TEXT ELEMENTS..
Insert -> Characters -> SAP Symbols
in print preview u can't see these changes..
for more details check this link..
How to create checkbox in smartforms??
Ashven

How to Print Vertically in Smart Forms

I need to print data in vertical format into columns in smart forms. Can any one give me the solution.

Hi Sreedhar,
In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
Best Regards,
Ram.

Using Continuos Printing stationary with smart forms is that possible ?

Similar Messages

Maybe you are looking for