Using cpInfoElapsedTimeMS variable with Submit All quiz

I've created a branching scenario with the cpInfoElapsedTimeMS variable to have my quiz time out after a set time and it works great if I don't have the Quiz Preferences set to Submit All. Because I must allow my learners to go back and review their answers before submitting to the LMS, I need to use the Submit All setting, which stops the variable from working properly. Any suggestions? Thanks!

I put a query in a WAD or when I Execute a Query from the Query designer. When I run the query the variable on the filter kicks in and it requests I select something e.g. cost centre. When I do the drop down in the variable to select a cost centre I dont get a list of cost centres. Only ?? where a cost centre should be. However when I select a ?? it does know what the cost cejtre is as it populates the variable with a cost centre. All the cost centre data is loaded etc.

Similar Messages

Time Format using text variable with replacement path

Hi Friends,
I've used "Text variable with replacement path" to make the column heading dynamic by replacing the values referring from "0calday"...
everything is working fine, but here it is displaying the time format like
YYYYMMDD (20030101), i want it to be displayed DDMMYYYY (01012003) in the column heading... how to make it possible?
pls waiting for ur inputs, it's an urgent...
Regards,
Pattnaik

Hi Satyakam,
In the text variable properties make sure that in the replacment path you have chosen "Text" to appear date as per user setting . Other wise as in your case it must be set to "Key" which always shows in the format YYYYMMDD.
Hope that helps.
Regards
Mr Kapadia

Using bind variable with IN clause

My application runs a limited number of straight up queries (no stored procs) using ODP.NET. For the most part, I'm able to use bind variables to help with query caching, etc... but I'm at a loss as to how to use bind variables with IN clauses. Basically, I'm looking for something like this:
int objectId = 123;
string[] listOfValues = { "a", "b", "c"};
OracleCommand command = new OracleCommand();
command.Connection = conn;
command.BindByName = true;
command.CommandText = @"select blah from mytable where objectId = :objectId and somevalue in (:listOfValues)";
command.Parameters.Add("objectId", objectId);
command.Parameters.Add("listOfValues", listOfValues);
I haven't had much luck yet using an array as a bind variable. Do I need to pass it in as a PL/SQL associative array? Cast the values to a TABLE?
Thanks,
Nick

Nevermind, found this
How to use OracleParameter whith the IN Operator of select statement
which contained this, which is a brilliant solution
http://oradim.blogspot.com/2007/12/dynamically-creating-variable-in-list.html

How to use shared variables with native c programs

Hello
What is the way to use shared variables with native c programs?
I have a c/c++ program that uses the NIDAQmx C-API to perform measurements. Now I want to communicate to a LabVIEW program via shared variables.
Is there a C-API for shared variables as there is for the NIDAQmx functionality? Where can I find further documentation? The document "Using the LabVIEW Shared Variable" mentions that one "can read and write to shared variables in ANSI C", but there are no hints about how and where to look.
Thanks in Advance

Hi user42,
with CVI 8.0, you cannot create or configure shared variables. However, you can read or write to an already configured LabVIEW 8.x shared variable from CVI using the DataSocket API.
In order to do this you need to have and DataSocket 4.3 or higher installed.
Here's a forum post about using the DataSocket functions a LabVIEW Shared Variables:
http://forums.ni.com/ni/board/message?board.id=180&message.id=24569&requireLogin=False
With CVI 8.1 and Measurement Studio 8.1 it's possible to use Shared Variables via the Network Varaiable Library (check out the end of the "Network-Published Shared Variable" section within the "Using the LabVIEW Shared Variable" documentation and the following link).
Datasocket with LabWindows/CVI and LabVIEW Real-Time:
http://digital.ni.com/public.nsf/allkb/CC4343488413A2F586256E6200099638?OpenDocument
Daniel
NIG

How to use bind variables with XMLTABLE?

I tried to use bind variables with xmltable statment. Here, my testcase:
create or replace function wsdltest return xmltype as
l_dummy xmltype;
l_stt clob;
l_name varchar2(500);
l_xml clob;
BEGIN
l_xml :=
'<definitions name="F1" targetNamespace="http://xmlns.oracle.com/orawsv/XFILES/F1" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/orawsv/XFILES/F1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://xmlns.oracle.com/orawsv/XFILES/F1" elementFormDefault="qualified">
<xsd:element name="SVARCHAR2-F1Input">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="A-VARCHAR2-IN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="F1Output">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</types>
<message name="F1InputMessage">
<part name="parameters" element="tns:SVARCHAR2-F1Input"/>
</message>
<message name="F1OutputMessage">
<part name="parameters" element="tns:F1Output"/>
</message>
<portType name="F1PortType">
<operation name="F1">
<input message="tns:F1InputMessage"/>
<output message="tns:F1OutputMessage"/>
</operation>
</portType>
<binding name="F1Binding" type="tns:F1PortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="F1">
<soap:operation soapAction="F1"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
</binding>
<service name="F1Service">
<documentation>Oracle Web Service</documentation>
<port name="F1Port" binding="tns:F1Binding">
<soap:address location="http://localhost:8080/orawsv/XFILES/F1"/>
</port>
</service>
</definitions>';
-- OK
l_stt := 'select * from xmltable(XMLNAMESPACES(''http://www.w3.org/2001/XMLSchema'' AS "XSD", default ''http://schemas.xmlsoap.org/wsdl/''),
''//definitions/types/XSD:schema/XSD:element[@name="SVARCHAR2-F1Input"]''
passing xmltype(:1)
columns
ab xmltype path ''.'' ) t';
EXECUTE IMMEDIATE l_stt INTO l_dummy using l_xml;
-- ERROR ORA-01006
l_name := '"SVARCHAR2-F1Input"';
l_stt := 'select * from xmltable(XMLNAMESPACES(''http://www.w3.org/2001/XMLSchema'' AS "XSD", default ''http://schemas.xmlsoap.org/wsdl/''),
''//definitions/types/XSD:schema/XSD:element[@name=:2]''
passing xmltype(:1)
columns
ab xmltype path ''.'' ) t';
EXECUTE IMMEDIATE l_stt INTO l_dummy using l_xml, l_name;
return l_dummy;
END;
Any idea ?
Thanks in advance
Cyryl

Why are you using dynamic SQL statements? Why not just use something like this instead in your PL/SQL. I also replaced the leading // in your Xpath with just / since you start from the root node.
select *
INTO l_dummy
from xmltable(XMLNAMESPACES('http://www.w3.org/2001/XMLSchema' AS "XSD", default 'http://schemas.xmlsoap.org/wsdl/'),
                '/definitions/types/XSD:schema/XSD:element'
                passing xmltype(l_xml)
                columns
                ab xmltype path '.' ) t;Also, the above returns two rows, which I suspect is not what you want. Here is the pure SQL version for you to debug.
select *
from xmltable(XMLNAMESPACES('http://www.w3.org/2001/XMLSchema' AS "XSD", default 'http://schemas.xmlsoap.org/wsdl/'),
               '/definitions/types/XSD:schema/XSD:element'
               passing xmltype('<definitions name="F1" targetNamespace="http://xmlns.oracle.com/orawsv/XFILES/F1" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://xmlns.oracle.com/orawsv/XFILES/F1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://xmlns.oracle.com/orawsv/XFILES/F1" elementFormDefault="qualified">
<xsd:element name="SVARCHAR2-F1Input">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="A-VARCHAR2-IN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="F1Output">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="RETURN" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</types>
<message name="F1InputMessage">
<part name="parameters" element="tns:SVARCHAR2-F1Input"/>
</message>
<message name="F1OutputMessage">
<part name="parameters" element="tns:F1Output"/>
</message>
<portType name="F1PortType">
<operation name="F1">
<input message="tns:F1InputMessage"/>
<output message="tns:F1OutputMessage"/>
</operation>
</portType>
<binding name="F1Binding" type="tns:F1PortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="F1">
<soap:operation soapAction="F1"/>
<input>
<soap:body parts="parameters" use="literal"/>
</input>
<output>
<soap:body parts="parameters" use="literal"/>
</output>
</operation>
</binding>
<service name="F1Service">
<documentation>Oracle Web Service</documentation>
<port name="F1Port" binding="tns:F1Binding">
<soap:address location="http://localhost:8080/orawsv/XFILES/F1"/>
</port>
</service>
</definitions>'
               columns
               ab xmltype path '.' ) t

SWF Compilation Failed with "Submit All" Option

Hi,
I am using Captivate 6.1 and created a quiz with single choice questions. When I turn on the "Submit All" option, I can not preview/publish the file anymore. It says "SWF Compilation Failed." and I am advised to check if any user variables contain AS keywords. I am not using any user variables in this project. Whenever I turn the "Submit All" option off, preview/publish are possible again.
When publishing to HTML5, the error does not occur.
Can you please help me with this issue, since I would appreciate using the "Submit All" option.

Hi
Check this forum : http://forums.adobe.com/thread/1111120?tstart=0
SWF compilation can come for following reasons:
1) If you use action script keywords in Captibvate project variables.
Resolution: Make sure you don't use action script keywords.
2) If you have invisible characters present in text fields.
Resolution: Don't Copy/Paste text from some other application to Captivate text fields like Project information etc. Type with key board. Create a blank project and publish, if you still get SWF compilation issue then your 64 bit JVM might be corrupted.
3) if your installation is 64 bit Captivate, 64 bit JVM might be corrupted.
Add Use32BitJVMForPublish = 1 in AdobeCaptivate.ini file
Close and Re-launch Captivate.
Re-publish the project
Captivate ini file is present at “C:\Program Files\Adobe\Adobe Captivate 6 x64” location
Thanks,
Vj

Quiz Timer Not Jumping to Score Slide for Submit All Quiz

I've followed the instructions for the TimeCheck advanced action posted by Lilybiri (http://lilybiri.posterous.com/timer-widget-to-stress-your-learners), but it doesn't work for me. Am wondering if it is because I am doing something wrong or because I have the Submit All option selected in the Quiz Preferences. Any ideas?
My goal is to have a countdown timer for a quiz that automatically jumps to the score slide when the time expires.

Hi,
It will not be functional anymore, because I checked and the variable associated with the Timer widget is not updated anymore. Moreover, one is limited in characters used for the variable., underscores are not possible anymore, variable always starts with a capital etc. I do not know what has changed in this widget, have been asking for an explanation but got no answer yet. For the moment the Timer widget is pretty useless if you want to do an action based on the value of the variable. I'm very sorry and should even check all posts about widgets (there are quite a lot there) to see if other similar problems occur.
My blog proves with the example and the screenshots that this work flow has been possible in the past. No tricks there.
Lilybiri

Using a variable with "tell application"

I'd like to use a variable (app_name) with "tell application" in the following function:
on getAdobeDoc(app_name)
tell application app_name
tell current document
return (name as Unicode text)
end tell
end tell
end getAdobeDoc
but I'm getting the following error in Script Editor
"Expected end of line but found class name." with the word "document" highlighted.
Are you allowed to use variables in "tell application"? All Adobe CS apps seem to use the same format to get the document name so I'd like to use one function to get them.

If the application might have a different name on the target machine (for example, if it has a version number added), you can use an application's bundle identifier (or creator code) to set the variable, in which case the using terms from statement tells AppleScript the application (on your machine) to get the dictionary terms from. If the application you are using terms from has a dictionary identical to your variable, everything should work the same. The following example uses a variable (called, appropriately enough, TexttEdit) for the TextEdit application:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;"
title="this text can be pasted into the Script Editor">
tell application "Finder" to set TextEdit to the name of application file id "com.apple.TextEdit"
tell application TextEdit
using terms from application "TextEdit"
launch
make new document with properties {text:"This is a test"}
end using terms from
end tell
</pre>

Using a Variable with BEX Java Applications

If I put a variable into a query and try to run the query using anything Java based (e.g. Web analyzer) when I do a drop down on the variable in the query to make a selection I dont get a proper selection choice. For example if I have a variable on Cost Centre I do the drop down on cost centre and I dont get a list of cost centres to chose from I just get ?? where the cost centres should be. If I select a ?? it does select a cost centre. It's just pot luck which you selec as they are all ??! This happens on any variable I use SAP Standard or any I have created. Any ideas - sounds like a Java patch should fix it but I cant see anything in SAP notes etc.

I put a query in a WAD or when I Execute a Query from the Query designer. When I run the query the variable on the filter kicks in and it requests I select something e.g. cost centre. When I do the drop down in the variable to select a cost centre I dont get a list of cost centres. Only ?? where a cost centre should be. However when I select a ?? it does know what the cost cejtre is as it populates the variable with a cost centre. All the cost centre data is loaded etc.

Report script - using substitution variable with multiple values

Hi All,
Substitution variable with multiple values is not working correctly with Report scripts. Can you please let me know what is the syntax to assign multiple values to a sub variable using maxl:
alter database samp.samp set variable 'ExtractQuarter' 'Q1,Q2,Q3,Q4';
alter database Samp.Samp set variable 'ExtractQuarter' 'Q1:Q4';
I tried both of the above but they are errored out with the below error:
Error: 1001005 - Unknown Member [Q1:Q4] in Report.
my requirement is different for both Actual and forecast data extract so i would like to make use of this variable to extract whole year data for Forecast and current quarter data for Actual with out duplicating the report scripts for both processes.
Thanks,
PRaveen

Hi,
Please refer following thread,
range of months in report script?
Hope it helps.
Regards

Use shared variables with FPGA device on Host PC

Hi all I am having a frustrating problem. I am trying to use shared
variables linked to a cRIO 9012. The shared variables were created and
then written to in a RT vi. is there any way I can assign locations to
these not within a RT vi. I altimately need to run the Host vi on a
TPC-2512 touch panel computer and I can't run a RT application on that. I
just need the variables to update without the RT vi running and I can't
figure out how to do that, if its even possible. Here is what I have so
far. Thank you in advance for your help.
Attachments:
PumpMonitoringDevice.zip ‏2083 KB

Adam:
You may be able to use arrays to speed up your program, but bear in mind that the TPC is pretty much guaranteed to be slower than your computer (as it's likely to have lower system specs).
You'll want to use the array manipulation functions to combine and retrieve your data (most useful will likely be "Build Array" and "Index Array," see context/LabVIEW help for more details). Once you have the data in an array, you can likely pass it through a shared variable configured for an array datatype.
I'm not sure if/how much of a speed boost it will give you, but I think it's definitely worth trying. If you're not sure about the speed, try simply cutting your variable count in half and see what kind of speed increase you get with the same amount of code but fewer variable values being transmitted through your network connection.
Good luck!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Using a Variable with AJAX

Hello,
Below I have posted code that I have on two different PHP files, tsearch12.php and votes12.php. The code works great. The file "tsearch12.php" uses AJAX to go to votes12.php to perform some functions. However, the first page has a variable called "find." These two pages only work together when the variable "find" equals "santafe." I would like them to work together regardless of what "find" equals. In other words, I would like to replace the table name "santafe" in votes12.php with the variable "find," but I want the variable "find" to equal the same value in both tsearch12.php and votes12.php. The variable "find" is going to tsearch12.php from another file, which has a simple HTML form with "<form action="tsearch12.php" method="post">" and "<input type="text" name="find" size="55"/>". Anyway, how do I use the variable "find" in votes12.php?
Thanks in advance,
John
On tsearch12.php, I have:
# <head>
# <script type='text/javascript' src='jquery.pack.js'></script>
# <script type='text/javascript'>
# $(function(){
#     $("a.cell1").click(function(){
#     //get the id
#     the_id = $(this).attr('id');
#     // show the spinner
#     $(this).parent().html("<img src='images/spinner.gif'/>");
#     //fadeout the vote-count
#     $("span#votes_count"+the_id).fadeOut("fast");
#     //the main ajax request
#         $.ajax({
#             type: "POST",
#             data: "action=vote_up&id="+$(this).attr("id"),
#             url: "votes12.php",
#             success: function(msg)
#                 $("span#votes_count"+the_id).html(msg);
#                 //fadein the vote count
#                 $("span#votes_count"+the_id).fadeIn();
#                 //remove the spinner
#                 $("span#button"+the_id).remove();
#     $("a.vote_down").click(function(){
#     //get the id
#     the_id = $(this).attr('id');
#     // show the spinner
#     $(this).parent().html("<img src='images/spinner.gif'/>");
#     //the main ajax request
#         $.ajax({
#             type: "POST",
#             data: "action=vote_down&id="+$(this).attr("id"),
#             url: "votes12.php",
#             success: function(msg)
#                 $("span#votes_count"+the_id).fadeOut();
#                 $("span#votes_count"+the_id).html(msg);
#                 $("span#votes_count"+the_id).fadeIn();
#                 $("span#button"+the_id).remove();
# </script>
# </head>
# <body>
# <?
# //This is only displayed if they have submitted the form
# if ($searching =="yes")
# //If they did not enter a search term we give them an error
# if ($find == "")
# echo "<p>You forgot to enter a search term";
# exit;
# // Otherwise we connect to our Database
# mysql_connect("mysqlv3", "username", "password") or die(mysql_error());
# mysql_select_db("sand2") or die(mysql_error());
# $find = strip_tags($find);
# $find = trim ($find);
# $result=mysql_query("SHOW TABLES FROM sand2 LIKE '%$find%'")
# or die(mysql_error());
# if(mysql_num_rows($result)>0){
# while($table=mysql_fetch_row($result)){
# print "<p class=\"topic\">$table[0]</p>\n";
# $r=mysql_query("SELECT * FROM `$table[0]`");
# print "<table class=\"navbar\">\n";
# while($row=mysql_fetch_array($r)){
# $effective_vote = $row['votes_up'] - $row['votes_down'];
# print "<tr>";
# print "<td>".'<a href="http://'.$row['site'].'" class="links2">'.$row['site'].'</a>'."</td>";
# print "<td class='votes'>".'<span class="votes_count" id="votes_count'.$row['id'].'">'.number_format($effective_vote).'</span>'."</td>";
# print "<td class='ballot'>".'<span class="button" id="button'.$row['id'].'">'.'<a href="javascript:;" class="cell1" id="'.$row['id'].'">'.Vote.'</a>'.'</span>'."</td>";
# print "</tr>\n";
# print "</table>\n";
# else{
# print "None found";
# $anymatches=mysql_num_rows($result);
# if ($anymatches == 0)
# echo "Sorry, but we can not find an entry to match your query<br><br>";
# ?>    On votes12.php, I have:
# <?php
# mysql_connect("mysqlv3", "username", "password") or die(mysql_error());
# mysql_select_db("sand2") or die(mysql_error());
# function getAllVotes($id)
#     Returns an array whose first element is votes_up and the second one is votes_down
#     $votes = array();
#     $q = "SELECT * FROM santafe WHERE id = $id";
#     $r = mysql_query($q);
#     if(mysql_num_rows($r)==1)//id found in the table
#         $row = mysql_fetch_assoc($r);
#         $votes[0] = $row['votes_up'];
#         $votes[1] = $row['votes_down'];
#     return $votes;
# function getEffectiveVotes($id)
#     Returns an integer
#     $votes = getAllVotes($id);
#     $effectiveVote = $votes[0] - $votes[1];
#     return $effectiveVote;
# $id = $_POST['id'];
# $action = $_POST['action'];
# //get the current votes
# $cur_votes = getAllVotes($id);
# //ok, now update the votes
# if($action=='vote_up') //voting up
#     $votes_up = $cur_votes[0]+1;
#     $q = "UPDATE santafe SET votes_up = $votes_up WHERE id = $id";
# elseif($action=='vote_down') //voting down
#     $votes_down = $cur_votes[1]+1;
#     $q = "UPDATE santafe SET votes_down = $votes_down WHERE id = $id";
# $r = mysql_query($q);
# if($r) //voting done
#     $effectiveVote = getEffectiveVotes($id);
#     echo $effectiveVote;
# elseif(!$r) //voting failed
#     echo "Failed!";
# ?>

These forums are for development with Java. Not JavaScript, which is an entirely different language. And AJAX is JavaScript. You need to use Google and find a JavaScript forum for your question (or a PHP forum if your question is really about PHP).

Using bind variables with sql statements

We connect from a VB 6.0 program via OO4O to an Oracle 8.1.7 database, using bind variables in connection with select statements. Running ok, but performance again by using bind vars not as good as expected!
When looking into the table v$sqlarea, we were able to detect the reason. We expected that our program submits the sql statement with bind vars, Oracle parses this once, and with each select statement again, we do not have a reparse. But: It seems that with each new session Oracle reparses the sql statement, that is, Oracle is not able to memorize or cache bind vars and statements. Even more worrying, this kind of behaviour was visible with each new dynaset, but the same database/session.
Is there anybody our there with an idea of what is happening here?
Code snippet:
Dim OraSession As OracleInProcServer.OraSessionClass
Dim OraDatabase As OracleInProcServer.OraDatabase
Set OraSession = CreateObject("OracleInProcServer.XOraSession")
Set OraDatabase = OraSession.OpenDatabase(my database", "my connect", 0&)
OraDatabase.Parameters.Add "my_bind", 0, ORAPARM_INPUT
OraDatabase.Parameters("my_bind").DynasetOption = ORADYN_NOCACHE
OraDatabase.Parameters("my_bind").serverType = ORATYPE_NUMBER ' Bind Var Type
Dim RS As OracleInProcServer.OraDynaset
strSQLstatement= "Select * from my_table where igz= [my_bind] "
Set RS = OraDatabase.CreateDynaset(strSQLstatement, &H4)
OraDatabase.Parameters("my_bind").Value = myValue
RS.Refresh
Cheers and thanks a lot :)
Michael Sonntag

We connect from a VB 6.0 program via OO4O to an Oracle 8.1.7 database, using bind variables in connection with select statements. Running ok, but performance again by using bind vars not as good as expected!
When looking into the table v$sqlarea, we were able to detect the reason. We expected that our program submits the sql statement with bind vars, Oracle parses this once, and with each select statement again, we do not have a reparse. But: It seems that with each new session Oracle reparses the sql statement, that is, Oracle is not able to memorize or cache bind vars and statements. Even more worrying, this kind of behaviour was visible with each new dynaset, but the same database/session.
Is there anybody our there with an idea of what is happening here?
Code snippet:
Dim OraSession As OracleInProcServer.OraSessionClass
Dim OraDatabase As OracleInProcServer.OraDatabase
Set OraSession = CreateObject("OracleInProcServer.XOraSession")
Set OraDatabase = OraSession.OpenDatabase(my database", "my connect", 0&)
OraDatabase.Parameters.Add "my_bind", 0, ORAPARM_INPUT
OraDatabase.Parameters("my_bind").DynasetOption = ORADYN_NOCACHE
OraDatabase.Parameters("my_bind").serverType = ORATYPE_NUMBER ' Bind Var Type
Dim RS As OracleInProcServer.OraDynaset
strSQLstatement= "Select * from my_table where igz= [my_bind] "
Set RS = OraDatabase.CreateDynaset(strSQLstatement, &H4)
OraDatabase.Parameters("my_bind").Value = myValue
RS.Refresh
Cheers and thanks a lot :)
Michael Sonntag

Can we use inner joins with for all entries?

Hi,
    Can we use innerjoin on two tables MARA and MAKT against the materials in
    the internal table.
    If so ,please let me know whether there is performance issue.Because if there is
    bad performance issue or something else like thise means,my project manager
    wont allow to include.
    So can one let me know about this.
Thanks,
Balaji

Hi Arunkumar,
                           I think you are not clear.My question is can I use innerjoin with
for all entries.For example below is my code.
SELECT A~MATNR
         B~MAKTX
         A~MTART
         A~MATKL
         FROM MARA AS A INNER JOIN MAKT AS B
         ON AMATNR = BMATNR
         INTO TABLE IT_MARA_MAKT
         FOR ALL ENTRIES IN IT_MATNR
         WHERE A~MATNR = IT_MATNR-MATNR
         AND   A~EXTWG = P_EXTWG
         AND   A~SPART = P_SPART.
Can we use like this for all entries along with innerjoins.
Thanks,
Balaji

Use Session Variable with row-wise initialization

Hello,
I use an initialization block in order to load some translations in my repository (version is 11.1.1.6.BP1) :
SQL :
SELECT CODE_KEY, STRING_VALUE FROM "TABLES" WHERE LANGUAGE_KEY= 'VALUEOF(NQ_SESSION.USERLOCALE)'
Values :
CN_INCOMING, Incoming, en
CN_OUTGOING, Outgoing, en
CN_INCOMING, Réception, fr
CN_OUTGOING, Emission, fr
etc ...
I checked the row-wise intialization.
The query is correct and returns the right values (I check in the log file ..).
So far, So good.
But when I want to use session variables in a column expression (in repository) like :
CASE WHEN "column"="xx" THEN VALUEOF(NQ_SESSION."CN_INCOMING") ELSE VALUEOF(NQ_SESSION."CN_OUTGOING") END
I got the error: [nQSError: 23006] The session variable, NQ_SESSION.CN_OUTGOING, has no value definition.
If I used the same formula directly in Answers it's working correctly.
Do I have to necessarily do this in answers or is there a way to do this in the repository.
Thanks in advance
Regards
Benjamin

Yes I already tested this point, when I don't use a row wise initialization it's working, but I don't want to create one variable for each translations that I need to use in column formula if you know what I mean.
I don't understand why we can't use this kind of variable in this context ..but if I have to create the column in my analysis, I will do that, but it's not really user friendly
Anyway thanks for your time.

Using cpInfoElapsedTimeMS variable with Submit All quiz

Similar Messages

Maybe you are looking for