Using CREATE_TEXT function module in LSMW for Tcode: FD32

Hi Friends,
I have to upload texts to the transaction FD32 via LSMW by using
CREATE_TEXT function module. If anyone has worked on this before
then please clarify the following doutb.
In which event (Begin of record, End of transaction etc)   I have to write the code?
Any sample code snippet for this requiremen would be helpful to me.
Thanks in Advance
Murthy

Hi,
Thanks for your responses.
I had found the solution on my own.
Thanks
Murthy

Similar Messages

  • How to keep long text in bdc using create_text  function module

    hi,
    ihave bdc in that i having field like long text i have to upload the long text using create_text function module how to use and where to use in bdc. wat parameters i have to pass exactly.
    i need some other information like how can i pass this to BDC i got like this .
    can u plz check it.
    its a length of 255 chaters
    perform bdc_field using 'RSTXT-TXLINE(02)'
    'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'
    & 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'.
    perform bdc_field using 'RSTXT-TXLINE(03)'
    'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
    & 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'.
    perform bdc_field using 'RSTXT-TXLINE(04)'
    'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'
    & 'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'.
    perform bdc_field using 'RSTXT-TXLINE(05)'
    'hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh'
    & 'hhhhhhhhhhhhhhhhhhhhhh'.

    Hi,
    Use this coding where do u want,
    data: begin of textline occurs 10.
            include structure tline.
    data: end of textline.
    start-of-selection.
    textline-tdformat = '*'.
    textline-tdline = 'TESTING FOR CREATION OF TEXT'.
    append textline.
    clear textline.
        call function 'CREATE_TEXT'
             exporting
                  fid       = '0013'
                  flanguage = sy-langu
                  fname     = '0095000501'
                  fobject   = 'VBBK'
             tables
                  flines    = textline
             exceptions
                  no_init   = 01
                  no_save   = 02.
    end-of-selection.

  • U00BFCan I use a function module as a driver program for sapscript?

    Hi,
    I have to use a function module as driver program for sapscript and there is no any value in the form (the data are not transferred)...
    but if I call the sapcript from a report with the same code as in my function module all the data are transferred OK.
    please, can you tell me if there is any problem in use of a function module in this case? is it impossible at all or is there any tip to apply?
    thank you all in advance.

    Hi,
    first of all it is possible to use a function module to process a SapScript form.
    The mistake on your side is probably the definition of the variables that you want to pass to the form. Please make sure they are defined as global (via SE37 --> Goto --> Global Data) then it should be working.
    In addition you could take a look at e.g. function module "PRINT_DUNNING_NOTICE". This is SAP standard and they are using it to print a SapScript form.
    Best regards
    Arno Speitkamp

  • CUSTOMER PARTNER INTERCHANGE, BAPI, FUNCTION MODULE or LSMW ??

    Hi Guys,
    I have a requirement to replace a partner with a new partner for a customer.
    Input for the same requirement is, below mentioned data in the format of a file.
    1. Customer No.
    2. Sales Organisation.
    3. Division.
    4. Distribution Channel.
    5. Partner Function to be deleted.
    6. Partner Number to be deleted.
    7. Partner Function to be added.
    8. Partner Number to be added.
    If anyone can suggest anything, Please let me know which one will be best to do this. BAPI, Function Module or LSMW.
    Let me know ASAP.
    Regards,
    Mayank.

    use bdc to tcode vap2
    A.

  • Problem with Create_Text Function module

    Hi All,
    I am using the function module Create_Text to create the text for Condition types in ME31K. Its working fine and creating text when i go to debug mode. Its updating into transactions(ME31K). But if i run the program in back ground or foregorund with out debuging modes its not creating text. Please do let me know any reasons

    Hi,
    Have you used FM COMMIT_TEXT  after CREATE_TEXT ? :
            CALL FUNCTION 'COMMIT_TEXT'
              EXPORTING
                OBJECT   = 'PMS'
                NAME     = W_TDNAME
                ID       = 'LTXT'
                LANGUAGE = 'E'.
    Try adding the 'COMMIT_TEXT' and check.
    Thanks & Regards,
    Faheem.

  • Use of function module BBP_PDH_WFL_APPROVAL_SIMULATE

    Dear SAP Gurus,
    We have build a custom check in the BBP_DOC_CHECK_SC Badi to check if an approver is added to the Shopping cart.
    In case of creating a Shopping Cart we can use the function module BBP_PDH_WFL_APPROVER_CHECK to check if an approver is added.
    In case of a Shopping Cart with status held, in case of the Shopping Cart in approval or in case of the Shopping Cart is disapprvod we can't use the function module BBP_PDH_WFL_APPROVER_CHECK. Because it's not checking correctly if the approver exist.
    In those case we use the function module BBP_PDH_WFL_APPROVAL_SIMULATE to check if en approver exist in the workflow. But we encounter a problem when using this function module.
    When the requester wants to add an approver, the requester first searches for the approver and then click on add approver. Then nothing happens. The approver isn't added to the workflow and in case there was no approver anymore (after disapproving the SC) first an error message is displayed but after performing the add approver task the error message isn't displayed anymore and the approver isn't visible in the workflow.
    Add an approver is also not possible when there is already an approver of no approver and the SC is put on Held. Then the same happens. Search for approver and click on Add Approver no approver is added.
    We think this has something to do with function module BBP_PDH_WFL_APPROVAL_SIMULATE.
    Has anyone some ideas how we can solve this? Check if approver exist in the workflow and still be abble to add an approver.
    We are on SRM 4.0 with ECC 6.0 in Extended Classic Scenario.
    Thank you in advance for your replies.
    Best regards,
    Jean-Pierre

    Hi,
    In my current project, there is a requirement to forward approver to other approver.
    Something like tcode SWIA when forwarding a workitem.
    In order to list approver of particular document, I am using BBP_PDH_WFL_APPROVAL_SIMULATE to needed parameters to run following FM BBP_PDH_WFL_PARAM_APPLET_FILL2.
    From FM BBP_PDH_WFL_PARAM_APPLET_FILL2, I know whether the document has approver assigned or not.
    Hopefully can help you.

  • How can i use reuse_alv_fieldcatalog_merge function module

    I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
    FORM BUILD_FIELDCATALOG .
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'KUNNR'.
      FIELDCAT-SELTEXT_M = 'Customer Name'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VBELN'.
      FIELDCAT-SELTEXT_M = 'Invoice Reference'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VKBUR'.
      FIELDCAT-SELTEXT_M = 'Sales Office'.
      FIELDCAT-JUST      = 'L'.
    FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'VKGRP'.
      FIELDCAT-SELTEXT_M = 'Sales Person'.
      FIELDCAT-JUST      = 'L'.
    FIELDCAT-KEY       = 'X'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FINAL'.
      FIELDCAT-FIELDNAME = 'POSNR'.
      FIELDCAT-SELTEXT_M = 'Item No'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-KEY       = 'X'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.
      FIELDCAT-TABNAME   = 'IT_FIANL'.
      FIELDCAT-FIELDNAME = 'ARKTX'.
      FIELDCAT-SELTEXT_M = 'Item Description'.
      FIELDCAT-JUST      = 'L'.
      FIELDCAT-DATATYPE  = 'C'.
      APPEND FIELDCAT TO I_FIELDCAT.
      CLEAR FIELDCAT.

    Hello,
    It is very easy to use reuse_alv_fieldcatalog_merge.
    You try this it will work.
    example
    data:
    DATA : gv_repid        TYPE syrepid VALUE sy-repid .  " Report id
      PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
    FORM set_field_catalog  USING uv_tab TYPE slis_tabname
                         CHANGING  xt_fieldcatalog TYPE slis_t_fieldcat_alv.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
        EXPORTING
          i_program_name         = gv_repid
          i_internal_tabname     = uv_tab
          i_inclname             = gv_repid
        CHANGING
          ct_fieldcat            = xt_fieldcatalog
        EXCEPTIONS
          inconsistent_interface = 1
          program_error          = 2
          OTHERS                 = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " set_field_catalog_spec

  • Sending mails to UWL using SO_NEW_DOCUMENT_ATT_SEND_API1 function module

    Hi all,
    is it possible to view mails send using SO_NEW_DOCUMENT_ATT_SEND_API1 function module to UWL?
    I am receving emails in my SAP Inbox.
    Please guide.
    thanks.

    Hi,
    You can only get the SAP mails into UWL notification tab with the Sonic connector (well of course with some custom development everything is possible).
    One trick to get the workflow for sending "mails" to UWL is to NOT use email sending step, but instead use a decision step in the workflow and send this work item to the user. The decision step can include the same message as the email, and have onl one option "Confirm" (or whatever). These you can easily display in UWL since they are normal work items.
    Regards,
    Karri

  • How to EDIT a particular Row in ALV using normal function module Reuse_alv_grid_display

    Hi experts..
    i got one requirement like i need to edit some rows particularly in alv....
    Edit in alv output....is it possible to get  that .....using normal function module with out using oops concept...
    could any one pls help me...

    Hi Pendurti ,
    If you want a particular field to be editable , simply define the fieldcatalog as
    wa_fieldcatalog-edit          = 'X'.
    wa_fieldcatalog-input         = 'X'.
    for that field.
    and
    Now when you use FM ' Reuse alv grid display '
    define USER_COMMAND
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = v_repid
          i_callback_pf_status_set = 'SET_PF_STATUS'
          i_callback_user_command  = 'USER_COMMAND'
          it_fieldcat              = int_fieldcatalog
          is_layout                = wa_layout
        TABLES
          t_outtab                 = t_disp.
    and now in form USER_COMMAND ; code as per following
    FORM user_command  USING r_ucomm LIKE sy-ucomm
                                rs_selfield TYPE slis_selfield.
         DATA ref1 TYPE REF TO cl_gui_alv_grid.
         CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
           IMPORTING
             e_grid = ref1.
         CALL METHOD ref1->check_changed_data.
    endform.
    Regards,
    Yogendra Bhaskar

  • Error while using the function module..pack_handling_unit_dlvry

    Hi all...
    while using the function module pack_handling_unit_dlvry,
    we need to pass the handling unit number as per the functionality we require.
    but the mandatory field for the function module is the handling unit number in the form of bar code..
    so how to use this function module..
    All the useful answers will be regarded..
    Regards,
    Saroja.

    Have you tried using BAPI BAPI_HU_CREATE. Also view Function Module Documentation on its usage.

  • Issue with use of Function Module GUI_UPLOAD

    Hi Experts,
    I have an issue in using the Function Module GUI_UPLOAD for uploading the contents of an Excel file on the Presentation Server to an internal table in an ABAP Program.
    My file consists of around 300 records but the FM succeeds in uploading only the first 6 lines to the Internal Table specified while calling the FM.
    I dont have any idea why this happens. Any pointers in this direction will be helpful.
    Thanks in advance.
    Regards,
    Keerthi

    Hi,
    Kindly go through this link below:
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=60655105
    Hope it helps you
    Regards
    Mansi

  • Function module "UPLOAD" failed for Unicode

    Hi,
    I have a program that uses the Function module UPLOAD. This function again uses the function ws_upload, which is obsolete. ws_upload and ws_download have been replaced by the new ones in CL_GUI_FRONTEND_SERVICES. But what function / method is replacing the UPLOAD function ?

    Hi!
    I'm using the function module GUI_UPLOAD for unicode files also.
    Regards
    Tamá

  • How to use these function modules

    Hi all,
    can anyone help that how to use these Function modules to update the status of a task, what are all the inputs i required to proceed
    1. FC_USER_AUTHORITY_CHECK
    <b>2. FC_USER_STATUS_CHECK
    3. FC_USER_STATUS_UPDATE</b>
    4. FC_USER_GET_CACTI
    5. FC_USER_CHECK_FOR_OUTPUT
    Thanks in Advance
    Ganesh

    Hi Rob,
    thanks for ur reply,
    but they are not clear what they are meant to be, I understood there are some flags needed to run the Function Modules 2 & 3 which are in bold...
    but how do i populate them.. i am not getting that..
    thanks
    ganesh

  • How can i use this  function module

    Hai
    How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
    thanks
    neelima

    Hi
    For a particular sales order,you have to pass the order number and the item number in the sales order.
    It will display the rest of the values which u can capture them using internal tables.
    Regards,
    Vishwa.

  • How to use BAPI_MATERIAL_AVAILABILITY Function Module at batch level?

    How to use BAPI_MATERIAL_AVAILABILITY FM to check material available at batch level?
    And another question is what's the meaning of 'CHECK_RULE' in this FM. Thanks!

    Field name : PRREG
    fcheck more details on  f1 help...
    check_group defines the checking procedure to be used for  availability check in individual applications.
    along with the checkg group, checking rule  specifies the final procedure for chkg..
    eg:
    ST  for  stock transport order
    AQ for SD order project srock
    also chk this help doc.
    http://help.sap.com/saphelp_470/helpdata/en/cf/70124adf2d11d1b55e0000e82de178/content.htm
    search the forum for sample code..
    How to use BAPI_MATERIAL_AVAILABILITY Function Module....

Maybe you are looking for

  • Can no longer reply, reply all or forward email

    I have an iPad Air 2 and use the internet (outlook to access my email...sorry, just the way I learned). Just recently I can no longer reply to, reply to all or forward to my email, only read.  I have not changed any settings nor done a recent update.

  • Problem in Trail Balance

    Dear sir, I am facing the Problem in Trail Balance Business Area wise. In our company code 4 Business Areas are configured, BA trail balance was not matching, Co code level it is matching for that i run F.5D & F.5E. I got the error in F.5E 1.Post zer

  • How do I get thumbprint images to appear in the Organizer of Photoshop Elements 13?

    After installing 13, I get hourglass symbols for all the pictures in the catalog, and when I click on them, I can see the picture image, but obviously can't search the catalog visually. Any ideas?

  • Folder permissions for sharing between users on the same machine

    Hello, I have several accounts on my MacBook and I want to keep some files private and some files shared with full permissions for everyone. OS X standard behavior for the default Users/Shared folder is that everyone has read/write access to the fold

  • Setting userid parameter for srw.run_report

    Hi, I'm using the srw package to run a report from a pl/sql procedure. All the documentation I can find regarding the SRW package says to set the userid parameter to 'userid/password@database' e.g. srw.add_parameter(lv_srw_plist,'USERID','userid/pass