Using cRIO chassis slots for general-purpose

hi,
i have cRIO 9004 and cRIO 9103 chassis, labview 2011...
as i know, cRIO chassis controls its slots if there present any module or not.. if detect anyone, read EEPROM and so on..
but how can i control cRIO chassis slots for my own general-purpose without any module...
when i create projects, it just shows me as chassis I/O
* chassis Temperature
* FPGA LED
* Scan Clock
* Sleep
* system reset
i couldn't write anything from chassis slots and see on oscilloscope screen, (for example: using as analog or digital output) ...
Davut..
Solved!
Go to Solution.

thanks for your reply
in fact i have...
-module development kit 2.0
-compactRIO module support 4.0.1
-NIRIO 4.0
i know which pins i can use for DIO or etc..
the point is, i haven't thought that it is not possible without hardware.. i read the manuals but couldn't create all structure in my mind..
So, as i understand from your message, i have some programs but it s not possible to controlling chassis slots without hardware.. am i right?

Similar Messages

Having trouble figuring out how to use trigger inputs as a general purpose input.

I'm trying to use "Trigger 1" as a general purpose input to indicate the status of external circuitry. I can't seem to get the "Read High-Speed Capture Status" to indicate anything. I'm using the "Configure High-Speed Capture" VI with the capture mode set to Inverting Digital Input, and that VI feeds into a Do-While loop which contains the "Read High-Speed Capture Status" VI, which has the Ret Vect set to 0. I see from the online help that the High-Speed Capture function is available on Servo and Closed-Loop stepper systems, which I suppose is to enable the ability to read the position of the encoders. I'm using an open loop stepper system, so are these High-Speed Capture fun
ctions unavailable even though I'm looking only for status (Trigger 1), and not concerned with reading position? Thanks in advance, Rob.

Thanks for the answer Ken. I'm going to try a different workaround. The global was too slow, and I think I'll break my subVI into two parts. I'll create a sub that has all the setup stuff in it, then embed the actual "check trigger status" loop in the main VI. The loop contains only 2 or 3 nodes. Too bad LabView works this way. I can see one reason it should, but another larger reason it shouldn't. Wishlist.... Oh, speaking of wishlist, I like the improvements that 6.0 has brought, but one thing still bugs me. There's no way to have LabView remember the place to look for files when it's first started. It defaults to "My Documents", which should be, as all LabView programers know "LabVIEW6\user.lib" (or whatever). Of course, once th
ere, LabView remembers for that session. Next time it's started, back to "My Documents" again. How 'bout fixing the "Options", "Path" settings so that it will actually remember the path set? Am I missing something here, or does it have anything to do with the fact that we're using Windows 98? My buddy's using NT, and his works the same. Is there a way around this? TIA, Rob.

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help

The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate

Can I use Oracle Express Edition for Educational purposes?

Dears,
I have an Information Technology school and I'm wondering if I can use Oracle Express Edition for Educational purposes. Do I need any special licenses for this?
I noticed the following statement on Oracle 11g Express download (Oracle Database Express Edition 11g Release 2) but would like to confirm if I have any restrictions about that.
"Oracle Database XE is a great starter database for:
Educational institutions and students who need a free database for their curriculum
Thanks
Martins

Hi Darsh,
I can't say that this was a good answer, but I addressed a similar question in this forum posting: https://forums.oracle.com/thread/2600958
Joel

Can i use FMS developer version for commercial purpose

HI,
Can I use flash media server4 developer version for commercial, if some one have knowledge about scope of the developer version then, please help me.
Thanks
Ram

If you refer to EULA of FMS you will see below text corresponding to Developer License:
.1. Software License. Subject to the terms and conditions of this Agreement, Adobe grants to Licensee a perpetual (except as set forth in Section 15) non-exclusive license to install the Software on one (1) Computer or Virtual Server and use the Software delivered hereunder according to the terms and conditions of this Agreement and the Documentation. Unless indicated otherwise by the License Key (as defined below) provided to Licensee, Licensee shall be deemed to have licensed the Development Server. If Licensee has licensed a Trial Version, in which case Section 2.2 applies, or if Licensee has licensed Not For Resale Software, in which case Section 2.3 applies.
2.1.1. Development Server License. This Section 2.1.1 applies only if Licensee has obtained a valid Development Server license to the Software. In addition to the other terms contained herein, (a) Licensee’s license to the Development Server Software is limited to a maximum number of (i) ten (10) Concurrent Connections when using with the Real Time Media Protocol (RTMP), and (ii) fifty (50) Concurrent Connections when using the Real Time Media Flow Protocol (RTMFP); and (b) Licensee shall not use the Development Server for load balancing. No maintenance and support is available for the Development Server.
So as per EULA you can use Developer Edition for commercial purpose with restriction that it cannot be used for load balancing or creating cluster of Developer Edition Network.
You can refer to this old article when this part of EULA was introduced: http://www.flashcomguru.com/index.cfm/2006/10/9/fmsdevedition

Can I use adobe illustrator fonts for commercial purposes?

Hi,
I have purchased adobe illustrator CS4. Does this mean I can use any of the fonts installed in the program for commercial purposes?
I am currently doing a t-shirt design and want to use the font Verdana in the design. I plan to reprint and sell this t-shirt indefinitely.
Is this legal?
Kay.

you can use the fonts you can even send the fonts to the printer you can certainly use them on the web, when you send the font it is usually only for the convenience of not having the Print House load the fonts, but since most font hoses have illustrator it is not a problem they have the fonts as well.
They only keep the fonts with your job if you send it. For instance if you send them a project with a font that is part of their font library hen they will ask you to send them even if another client has or is using that font. if they get 10 or so instance were the same font shows up and they think it is a trend they buy the font as a convenience for their customers.You can not distribute the fonts to other user not even free fonts.
But sending it part of the job is fine, printers have no interest starting up with the large foundry houses and they understand the copyright laws and would put themselves in a bad light if they broke this ethic so it is not going to happen for $30.00 for a font.
You are fine you bought Illustrator and so you have a license for them.
One difference between the fonts you get from Illustrator and and the ones you purchase is that the ones you purchase are allowed to be installed on five machines usually and the fonts that are included with Illustrator can only be installed with the copy of Illustrator, technically that means two machines.
But the way it works since you can install the same Illustrator on as many machines as you want but can only activate it on two an use on one of those two at any one time it is possible that you would be in violation of your license since the fonts do not need Adobe activation to be available for other applications.
So it you're doing that then you're a felon buddy!

Using the Macbook Air for intensive purposes?

Hi all,
      I purchased my Macbook Air a year and half ago (2012 model). Purchased it because it was Macbook Air or the Macbook Pro and I saw it would be better to develop on an Air because it had an ssd and I haven't used an Optical Drive in ages. Ever since then I had 2 Failures in components. One was SSD, which I hardly used just because I was using Ubuntu at the time on an External Hard Drive. Second, was the Logic Board and I/O board which started to eject my externals randomly. I make sure my computer runs no more than 80C by turning off cores and disabling Turbo Boost while gaming (Everything on Lowest playable setting) or compiling and such.
    Anyways, I am asking if any one casually plays intensive games and/or any CPU/GPU intesive tasks and had no problems what so ever and never needed a repair from the Apple Store.
     Why am I asking this? I am asking this because I kind of see Apple Notebooks falling in the wrong direction in notebooks. Don't get me wrong, I like their products and their form factors, but it seems to me that they do no account for all scenarios of using a computer. For Instance, I held in my hand the Heatsink they used on my Air and its not bigger than my hand. I don't want to be judgy, but it seems way too insufficient to cool a cpu of 17TDP no matter how fast fan is pushing the air out of the computer. It is just absurd.
     The best thermal set up I have ever seen Apple produce was the Macbook Pro Retina 13". It had two seperate fans that cooled ONE CPU. Not sure what kind of direction they are going for, but I think most of all problems that keep me returning to the Apple store for repairs is the continous spread of intense heat around the computer. This also goes for the Currents Macbook Pros which Now only Have one fan cooling everything. I seriously could care less about weight, they could add half a pound to the computer to add an extra fan to computer if it means I dont have to return to the Apple Store every five minutes. At this point I think the best way to keep my Air returning to the Apple Store is to just check emails or watch youtube at this point, which I could do on a $300 netbook.
     I would like to see what your guy's opinion about this matter? Is doing anything intensive OK doing on a Mac Notebook?

My primary machine is still a late-2008 unibody 15" MBP (2.53Ghz Core 2 Duo) bought in early 2009. I cannot say I ever do much that is GPU intensive and usually do not use the discrete GPU most of the time. But, I have done work on it that is very CPU intensive - computations that have max'd out the CPU load for as long as 12-24hrs at a time (overnight analysis runs), and which have ramped up the fans to or near maximum rpm and cpu temperatures steady in the 90's degree centigrade for hours. This machine is now 5 years old and runs fine and has never required any service from Apple. I upgraded it to 8GB RAM a couple of years ago, and I replaced the original battery but that is all that has been done to it.
I use a desk-top stand (from a maker who's name escapes me now? its old, bought back before this particular MBP) that keeps it raised about 0.5" at the front and maybe 1.25-1.5" at the rear so it has good air flow all the time.
However, games that are both very taxing on the CPU and the GPU at the same time will certainly put a higher thermal load then I've experienced, and my MBP has dual fans.

Deskjet 6988dt, how to use photo/envelope slot for printing 4x6 photo paper?

Windows 7 Home Premium 64-bit OS. Printer has the extra250 sheet paper tray. Upper and lower tray work fine. I can of course load photo paper in upper tray and print photos from there, but I was trying to load just one sheet of photo paper in the little slot since I don't want to have photo paper loaded all the time. Since I have to use the generic Windows driver for this printer as HP doesn't have a driver update for this printer and Windows 7, the only selections I'm seeing in printer properties is "automatic, upper, lower". I've tried all three of those settings and none take the paper from the little slot where I'm manually feeding the 4x6 photo paper. What am I doing wrong? Could it be that this feature just isn't enabled with the generic Windows driver?
The reference/instruction documentation that came with this printer is very sparse. I can't find any instruction on how to use the photo/evelope slot. In fact I'd say overall the documentation is very poor.
I just checked the HP site, still no Windows 7 64-bit driver available.
Thanks for any help or ideas.

Found a .pdf document on line for the Desjet 6980 series printers. Much more comprehensive than what came with the printer.
http://h10032.www1.hp.com/ctg/Manual/c00591373.pdf
Follow these steps to use the photo/envelope feeder to print a single photo:
1. Insert the photo paper into the photo/envelope feeder with the side to be printed on
facing down.
2. Gently push the photo paper into the photo/envelope feeder as far as it will
comfortably go.
3. Slide the photo/envelope feeder forward as far as it will go.
4. Print the photo.
Problem was, although I was inserting the 4x6 photo paper into the feeder, I wasn't pushing the little plastic slide forward.

Use a remote iPad for development purposes?

I want to allow my partner's iPad to test my apps. No problem, of course if the iPad is within connecting distance to XCode. However, the iPad is at a remote location, and my partner doesn't use a Mac.
How can I authorise the device and transfer my apps to it for testing?

It's on
https://developer.apple.com/library/ios/documentation/IDEs/Conceptual/AppDistrib utionGuide/TestingYouriOSApp/TestingYouriOSApp.html

How to use one Bex Variable for two purposes in one query?

Hi,
I want to prompt for a UOM in a query. Then I want to use that one UOM variable to do 2 tasks in the query:
1. Perform a UOM conversion on one restricted key figure (no filtering)
2. Filter in a second restricted key figure (no conversion)
How would I use a variable (or two?) to do this? I do not want to have 2 UOM prompts.
Thanks!
Gregg

Oh, it all seems so easy now! Hindsight 20-20...
Solution was to create a new input ready variable for Unit.
1. Restrict the key figures which need restricting using new variable
2. For conversions, in BI backend us T-code RSUOM and create new conversion type associated with new variable. Then for each key figure needing conversion, set the conversion parameter to use the new conversion type.
Between both 1 & 2 above, the same variable is used & thus prompted only once.
Solution works perfectly.... as it should. Hope this helps someone else!

Can I use APEX Packaged applications for commercial purposes

Hi,
When you download and Install APEX, it comes with pre build packaged applications. Can I use it to make money?
I understand that I will not be able to get any support for Oracle and all that. But using Database XE with APEX, can I start shipping these applications and make money lawfully without violating Oracle's terms?
Please advise.
Darsh

Hi Darsh,
I can't say that this was a good answer, but I addressed a similar question in this forum posting: https://forums.oracle.com/thread/2600958
Joel

Can I use ISE demo license for wireless purposes???

Hi all.
We want to try an ISE deployment with one or two WLC and the license twe want to use initially is the demo embedded in the ISE appliance. We don't know whether we can do it because demo license covers base and advanced capabilities but not wireless (at least in administration/licensing this box shows "not installed" leyend) and we don't know whether a demo tape of wireless solution will work with this type of licensing; if not, is it possible to get a demo wireless license for ISE?
Thanks.
Best Regards.

The evaluation license does cover the wireless. Its actaully a full license.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Cool uses of Shell codes for self purposes

Hi, I posted the following message to the PL/SQL list. But since I am also interested in the UNIX part fo the topic. I am posting here as well:
Hello,
I am new and learning Oracle. I would like to make the learning more interesting and applicable by creating some small applications for myself. I have setup a linux computer and installed 9i.
I would like to know what cool things others have done using PL/SQL triggers, procedures, or even cron stuff and unix shell coding. Something like everytime I executed a sql, a copy of the sql is inserted into a special table. Or something like organization, planning, reminder, etc.
I am not looking for code. Instead if there are good uses of these, I will try to take challenges to write the code so that I can learn.
Best regards.
cder

if you are looking for some challenges try to answer some postings in this forum. you might find find some basic or more even challeging questions posted.

Using a passed parameter for distribution purposes

Good day all!
I am passing a parameter from forms to the DESNAME parameter in reports. The problem I am having is that when I go to distribute the report, it fails due to not having a distribution list. Do I have to hardcode the email address in the DESNAME parameter in the report in order to distribute it? If not, how do I set he DESNAME parameter in the distribution list to accept a value that has been passed in. I have tried doing :DESNAME := :PASSED_VALUE, but I'm not sure where to go from there. Any ideas would be great.
Thanks,
Adam

Hello,
Oracle® Application Server Reports Services Publishing Reports to the Web
10g Release 2 (10.1.2)
B14048-02
15 Creating Advanced Distributions
15.2.2 Using Variables Within Attributes
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_dist.htm#i1007338
Regards

Sliding window sanario in PTF vs Availability of recently loaded data in the staging table for reporting purpose

Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
this non-portioned staging table is by creating views, which we don’t want to change our codes.
Do you guys share us your thoughts, experiences???
We really appreciate your help.

Hi BG516,
According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
If this is not what you want, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Using cRIO chassis slots for general-purpose

Similar Messages

Maybe you are looking for