Using CRQ to close ASN for SA Release

We do create ASNs in SNC. However we do not use inbound deliveries to post GR in ECC. GR is posted with reference to the SA number. So the POD message is not sent to SNC to close the ASNs.
When transferring the new release to SNC we would like to use Cumulative Received Quantity to close the ASNs from the release.
However this does not seem to work. Has anyone implemented this? Please share the config if possible.
Thanks,
K

Hi Kedar
These two help links have some information on how to achieve the same
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8b/74f24087528431e10000000a1550b0/content.htm
http://help.sap.com/saphelp_scm70/helpdata/en/f0/ccdd9b1b7e4aa681dec9c40e1a2aef/content.htm
Didnt find any configuration guide.............will share the steps if i find any !!
Best Regards
Vinod

Similar Messages

IPad closes browser for no reason

When trying to use browser iPads closes browser for no reason

The iPad didn't close the browser rather the browser encountered som internal error and was forced to quit (i.e., a browser bug). Sometimes these errors can be caused by the browser running out of memory.
Sometimes a particular web site will expose a browser bug causing it to crash frequently (or always) when visiting that site.
Report these problems to Apple with site information when encountered:
http://www.apple.com/feedback/ipad.html

I used to have a close tab for exiting the current site I was on instead of closing all of firefox. How do I get it back?

I used to have a close tab for exiting the current site I was on instead of closing all of firefox. It was a red box with an x in it. How do I get it back?

Click in a blank space on a toolbar & open 'customize'. You'll find that there is a gray "x" (on my browser it's gray) that is for closing a tab. Drag it up to wherever you want on the toolbar & it should work fine.

Why can we only use 1 release class for overall Release of Purchase Req?

Hi,
After realizing that it would be beneficial to use more than one release class for overall release of Purchase Requisition with classification, in use with release groups for overall release, I now ask if someone knows why SAP has chosen to only allow 1 release class for overall release of Purchase Requisition?
In my scenario I would like Release group US, used for release strategies for US-plant to be able to use 1 release class with a specific set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_USD including a characteristic PR_TOTVAL_USD looking at CEBAN-GFWRT. The chosen currency for this characteristic would be USD.
I would then like to allow Release group FR, used for release strategies for FRANCE-plant to use another release class with another set of characteristics.
For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_EUR including a characteristic PR_TOTVAL_EUR looking at CEBAN-GFWRT. The chosen currency for this characteristic would be EUR.
In this way the release strategies for the respective release groups US and FR, could maintain their overall limit values in their respective release strategies in their own currencies.
1. Observe that I do not want to use the same Release class for both release groups for overall release, even though I know that this is currently the only allowed option, as far as I've understood.
2. Observe that I do not want to specify the two characteristics PR_TOTVAL_USD and PR_TOTVAL_EUR for overall value in the same release class, as this would lead to double maintenance for a large number of release strategies. Also consider the maintenance when new countries with new currencies want release strategies.
3. Observe that I only want to use overall release.
What I'm trying to avoid is having to continuously translate local business USD overall value limits to limits in the currency chosen for the overall value characteristic. If this for example is specified in DKK, this would lead to a need to adjust the overall value limits as soon as the exchange rate between USD and DKK changes in the system.
Please consider this simple example:
Local requirement is that USD purchase requisitions should be blocked when the USD value is above 1000 USD. However in my release strategy I would have to maintain a value of >5365 DDK, if DKK is chosen as the currency for overall characteristic.(e.g exchange rate 5,365).
Next month the currency exchange rate in the system between USD and DKK has changed, and therefore I would have to go into CL24N and maintain the value to reflect the new exchange rate between USD and DKK. Lets say it has gone up to 5,435. I would now have to maintain a value of > 5435 DKK in my release strategy to correctly reflect the local business requirement of 1000 USD.
So if anyone could please explain why SAP has taken the decision to make the Release class for overall release client specific that would be much appreciated and awarded accordingly. Also if you have any suggestion on how I could obtain the above scenario on maintaning overall value limits in different currencies than that would be awarded to.
BR Jakob F. Skott

You can give feed back to Apple from the iTunes drop-down menu in the iTunes menu bar..
You can also contact the iTS Customer Service from the links on this page - http://www.apple.com/support/itunes/store/
MJ

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

Anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, less cheaper

anybody can help me understand if the Ipads becomes ready to be used in all world regions with 3G and or 4G infrastructure? I mean, are all of them released or when I buy one in the US to be used in Argentina I need to ask for a released one, with add costs?

There are two versions of the current iPad, the WiFi only (which will work anywhere in the world, but only connect to WiFi networks) and the 3G/4G model. The latter will connect to 3G networks worldwide, as I understand it, but the only 4G networks it can connect to are in the US and Canada.

There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

There used to be a extension for Safari called "close all tabs". It is no longer on the extension list. Does anybody know why it was removed?

Mr. Davis answer is essentially what that extension did. I thank Mr. Davis for this answer as I was not aware of this method. I only brought this up becasue in Lion there is a nasty habit of Safari opening all previous tabs that where not closed when shuting down the computer. This can cause a long delay in opening Safari becasue of all the tabs opening up. The "close all tabs" exstension stopped all this opening process. I have to assume that Apple replaced the extension with the process that Mr. Davis describes, however, the extension was a lot faster. By the way, I have this extension still and I still use it. I just wanted to pass it on to some other users, but guess I will have to give up on that idea.

Report to find open items and close items for given vendor

Hi All,
What are the steps needed to write a REPORT to find out
open and close items for a given vendor.
Which are the fields i'll have to take and what are the comparisons i'll have to make.
I know,
BSIK is for open Vendor &
BSAK for closed Vendors..
what are the conditions i'll have to check.
Thanks in Advance..
Pradeep Alex

Hi Pradeep,
This report I developed is definitely useful to you.
*& Report ZFI_PROV_IT_VENDOR
REPORT ZFI_VENDOR.
TYPE-POOLS: slis.
tables: BKPF,
        BSEG,
        bsik,
        bsak,
        bsid,
        bsad,
        lfa1,
        t005u,           "Region Description
        J_1IMOVEND.
TYPES: BEGIN OF ty_bkpf,
        bukrs type bkpf-bukrs,
        belnr TYPE bkpf-belnr,
        gjahr type bkpf-gjahr,
        blart TYPE bkpf-blart,
        budat TYPE bkpf-budat,
       END   OF ty_bkpf.
types: begin of ty_J_1IMOVEND,
         lifnr     type lfa1-lifnr,
         J_1IPANNO type J_1IMOVEND-J_1IPANNO,
         J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
         J_1ISERN type J_1IMOVEND-J_1ISERN,
       end   of ty_J_1IMOVEND.
TYPES: BEGIN OF ty_bseg,
        belnr TYPE bseg-belnr,
        gjahr type bseg-gjahr,
        bschl TYPE bseg-bschl,
        umskz type bseg-umskz,
        shkzg type bseg-shkzg,
        wrbtr TYPE bseg-wrbtr,
        hkont type bseg-hkont,
        lifnr TYPE bseg-lifnr,
       END   OF ty_bseg.
types: begin of ty_t005u,
        bland type t005u-bland,
        bezei type t005u-bezei,
       end   of ty_t005u.
types: begin of ty_lfa1,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,   "35
        ort01 type lfa1-ort01,   "35
        ort02 type lfa1-ort02,   "35
        pfach type lfa1-pfach,   "10
        pstlz type lfa1-pstlz,   "10
        regio type lfa1-regio,   "3
        stras type lfa1-stras,   "35
        ktokk type lfa1-ktokk,
        telf1 type lfa1-telf1,   "16
        telf2 type lfa1-telf2,   "16
       end   of ty_lfa1.
types: begin of ty_bsik,
        bukrs type bsik-bukrs,
        lifnr type bsik-lifnr,
        augdt type bsik-augdt,
        augbl type bsik-augbl,
        belnr type bsik-belnr,
        budat type bsik-budat,
        blart type bsik-blart,
        shkzg type bsik-shkzg,
        wrbtr type bsik-wrbtr,
       end   of ty_bsik.
types: begin of ty_bsid,
        bukrs type bsid-bukrs,
        lifnr type bsid-kunnr,
        augdt type bsid-augdt,
        augbl type bsid-augbl,
        belnr type bsid-belnr,
        budat type bsid-budat,
        blart type bsid-blart,
        shkzg type bsid-shkzg,
        wrbtr type bsid-wrbtr,
       end   of ty_bsid.
types: begin of ty_out2,
        lifnr type bsik-lifnr,
        wrbtr type bsik-wrbtr,
        end of ty_out2.
types: begin of ty_out,
        lifnr type lfa1-lifnr,
        name1 type lfa1-name1,
        addr(162) type c,
        J_1IPANNO type J_1IMOVEND-J_1IPANNO,
        J_1ICSTNO type J_1IMOVEND-J_1ICSTNO,
        J_1ISERN type J_1IMOVEND-J_1ISERN,
        opbal type bseg-wrbtr,
        purch type bseg-wrbtr,
        PAYM type bseg-wrbtr,
        grdeb type bseg-wrbtr,
        othdeb type bseg-wrbtr,
        othcre type bseg-wrbtr,
        tds   type bseg-wrbtr,
        bal   type bseg-wrbtr,
        blart type bkpf-blart,
        bschl type bseg-bschl,
       end of ty_out.
types: begin of ty_bsegtemp,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegtemp.
types: begin of ty_bsegnew,
        wrbtr TYPE bseg-wrbtr,
        lifnr TYPE bseg-lifnr,
       end   of ty_bsegnew.
data: it_bsik type table of ty_bsik with header line,
      it_bsid type table of ty_bsid with header line,
      it_bsak type table of ty_bsik with header line,
      it_out2 type table of ty_out2 with header line,
      it_out3 type table of ty_out2 with header line.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
       it_listheader TYPE slis_t_listheader,
       it_alvevent TYPE slis_t_event,
       gt_events TYPE slis_t_event WITH HEADER LINE.
DATA: I_SORT TYPE SLIS_T_SORTINFO_ALV.
DATA : wa_fieldcat TYPE slis_fieldcat_alv,
       wa_listheader TYPE slis_listheader,
       wa_alvevent TYPE slis_alv_event.
DATA: WA_SORT TYPE SLIS_SORTINFO_ALV.
DATA: ls_line TYPE slis_listheader.
DATA : g_repid LIKE sy-repid,                  " Program ID
       g_layout TYPE slis_layout_alv.           " Layout Workarea
DEFINE m_fieldcat.
wa_fieldcat-col_pos       = &1.               " Fieldcat column postion
wa_fieldcat-fieldname     = &2.               " Field name
wa_fieldcat-DO_SUM        = &3.
wa_fieldcat-seltext_m     = &4.               " Column Text
wa_fieldcat-outputlen    = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DATA: wa_lfa1 TYPE ty_lfa1,
      wa_bkpf TYPE ty_bkpf,
      wa_bkpf1 type ty_bkpf,
      wa_bsegtemp type ty_bsegtemp,
      wa_bsegnew type ty_bsegnew,
      wa_bsegnew1 type ty_bsegnew,
      wa_J_1IMOVEND type ty_J_1IMOVEND,
      wa_t005u type ty_t005u,
      wa_bseg TYPE ty_bseg,
      wa_out    TYPE ty_out.
DATA: gt_out TYPE STANDARD TABLE OF ty_out,
      gt_out1 TYPE STANDARD TABLE OF ty_out,
      gt_lfa1 TYPE STANDARD TABLE OF ty_lfa1,
      gt_bsegtemp type standard table of ty_bsegtemp with header line,
      gt_bsegnew type standard table of ty_bsegnew with header line,
      gt_bsegnew1 type standard table of ty_bsegnew with header line,
      gt_J_1IMOVEND type standard table of ty_J_1IMOVEND,
      gt_bkpf1 TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE,
      gt_t005u type standard table of ty_t005u,
      gt_bseg TYPE STANDARD TABLE OF ty_bseg WITH HEADER LINE,
      gt_bkpf TYPE STANDARD TABLE OF ty_bkpf WITH HEADER LINE.
selection-screen begin of block b1 with frame title text-001.
select-options: s_budat for bkpf-budat obligatory,
                s_ktokk for lfa1-ktokk obligatory.
               s_wrbtr for bseg-wrbtr.
parameters: p_bukrs type bkpf-bukrs obligatory default '1000'.
           p_gjahr type bkpf-gjahr obligatory.
           p_lifnr type bseg-lifnr obligatory default '300040',
           p_ktokk type lfa1-ktokk obligatory default 'Z200'.
selection-screen end   of block b1.
START-OF-SELECTION.
PERFORM sub_fetch_data.
PERFORM sub_process_data.
END-OF-SELECTION.
PERFORM sub_build_fieldcat.
PERFORM sub_build_layout.
PERFORM eventtab_build USING gt_events[].
PERFORM comment_build USING it_listheader[].
PERFORM sub_disp_data.
*&      Form SUB_BUILD_FIELDCAT
      text
--> p1        text
<-- p2        text
FORM sub_build_fieldcat .
sort gt_out by name1.
*DEFINE M_SORT.
   ADD 1 TO WA_SORT-SPOS.
   WA_SORT-FIELDNAME = &1.
   WA_SORT-UP        = 'X'.
   WA_SORT-SUBTOT    = &2.
   APPEND WA_SORT TO I_SORT.
END-OF-DEFINITION.
*m_sort 'NAME1' 'X'.
*M_SORT 'ADDR' 'X'.
m_fieldcat 1 'LIFNR' ' ' text-026 10.
m_fieldcat 2 'NAME1' ' ' text-006 35.
m_fieldcat 3 'ADDR' ' ' text-007 162.
m_fieldcat 4 'J_1IPANNO' '' text-008 40.
m_fieldcat 5 'J_1ICSTNO' '' text-009 40.
m_fieldcat 6 'J_1ISERN' '' text-010 40.
m_fieldcat 7 'OPBAL' '' text-011 18.
m_fieldcat 8 'PURCH'    '' text-012 18.
m_fieldcat 9 'PAYM' '' text-013 18.
m_fieldcat 10 'GRDEB' '' text-014 18.
m_fieldcat 11 'OTHDEB' '' text-020 18.
m_fieldcat 12 'OTHCRE' '' text-021 18.
m_fieldcat 13 'BAL' '' text-023 18.
m_fieldcat 14 'TDS' '' text-022 18.
ENDFORM.                    " SUB_BUILD_FIELDCAT
*&      Form SUB_BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
FORM sub_build_layout .
g_layout-zebra             = 'X'.
g_layout-colwidth_optimize = 'X'.
ENDFORM.                    " SUB_BUILD_LAYOUT
*&      Form EVENTTAB_BUILD
      text
     -->P_GT_EVENTS[] text
FORM eventtab_build USING    gt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events WITH KEY name = slis_ev_top_of_page
                           INTO ls_event.
IF sy-subrc = 0.
    MOVE 'TOP_OF_PAGE' TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " EVENTTAB_BUILD
*&      Form COMMENT_BUILD
      text
     -->P_IT_LISTHEADER[] text
FORM comment_build USING    p_it_listheader TYPE
                                        slis_t_listheader.
data: v_text(30) type c,
      v_datelow(10) type c,
      v_datehigh(10) type c,
      v_month(2) type c,
      v_day(2) type c,
      v_year(4) type c.
v_day = s_budat-low+6(2).
v_month = s_budat-low+4(2).
v_year = s_budat-low+0(4).
concatenate v_day '.' v_month '.' v_year into v_datelow.
clear: v_day,v_month,v_year.
v_day = s_budat-high+6(2).
v_month = s_budat-high+4(2).
v_year = s_budat-high+0(4).
concatenate v_day '.' v_month '.' v_year into v_datehigh.
clear: v_day,v_month,v_year.
concatenate 'From' v_datelow 'To' v_datehigh into v_text
                                    separated by space.
clear: v_datelow, v_datehigh.
ls_line-typ = 'H'.
ls_line-info = text-116.
APPEND ls_line TO p_it_listheader.
ls_line-typ = 'S'.
ls_line-key = text-090.
ls_line-info = v_text.
APPEND ls_line TO p_it_listheader.
ENDFORM.                    " COMMENT_BUILD
*&      Form TOP_OF_PAGE
      text
--> p1        text
<-- p2        text
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_listheader.
ENDFORM.                    " TOP_OF_PAGE
*&      Form SUB_DISP_DATA
      text
--> p1        text
<-- p2        text
FORM sub_disp_data .
g_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_repid
      it_fieldcat        = it_fieldcat[]
      is_layout          = g_layout
      i_save             = 'U'
      it_events          = gt_events[]
    IT_SORT             = I_SORT[]
    TABLES
      t_outtab           = gt_out1[].
ENDFORM.                    " SUB_DISP_DATA
*&      Form sub_fetch_data
      text
--> p1        text
<-- p2        text
form sub_fetch_data .
select bukrs
       belnr
       gjahr
       blart
       budat
       from bkpf
       into table gt_bkpf
       where budat in s_budat
       and   bukrs = p_bukrs
      and   gjahr = p_gjahr
       and   blart in ('KR','KG','KZ','RE','DK','Z1','AB','SA','KA','DZ').
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       lifnr
       from bseg
       into table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19,35).
      and kunnr in gt_
      and lifnr = '0000300019'.
select belnr
       gjahr
       bschl
       umskz
       shkzg
       wrbtr
       hkont
       kunnr
       from bseg
       appending table gt_bseg
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and   gjahr = gt_bkpf-gjahr
      and gjahr = p_gjahr
       and   bschl in (21,25,29,31,50,39,38,19).
break manukapur.
sort gt_bseg by lifnr bschl.
delete adjacent duplicates from gt_bseg comparing all fields.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
move: wa_bseg-lifnr to wa_bsegtemp-lifnr.
      append wa_bsegtemp to gt_bsegtemp.
      endif.
endloop.
delete adjacent duplicates from gt_bsegtemp comparing lifnr.
select lifnr
        name1
        ort01
        ort02
        pfach
        pstlz
        regio
        stras
        ktokk
        telf1
        telf2
        from lfa1
        into table gt_lfa1
        for all entries in gt_bseg
        where lifnr = gt_bseg-lifnr
        and ktokk in s_ktokk.
       and lifnr = '0000300030'.
select bland
        bezei
        from t005u
        into table gt_t005u
        for all entries in gt_lfa1
        where bland = gt_lfa1-regio
        and land1 = 'IN'
        and spras = sy-langu.
select lifnr
       J_1IPANNO
       J_1ICSTNO
       J_1ISERN
       from J_1IMOVEND
       into table gt_J_1IMOVEND
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr.
*select bukrs
      belnr
      blart
      budat
      from bkpf
      into table gt_bkpf1
      where budat < s_budat-low.
      and zfdbt < s_budat-low.
select
       wrbtr
       lifnr
       from bseg
       into table gt_bsegnew
       for all entries in gt_bkpf
       where belnr = gt_bkpf-belnr
       and xopvw = 'X' .
      and zfbdt < s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsik
       into table it_bsik
       for all entries in gt_bseg
       where lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   bukrs = '1000'
       and   budat <= s_budat-low.
select bukrs
       lifnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsak
       appending table it_bsik
       for all entries in gt_bseg
       where bukrs = '1000'
       and   lifnr = gt_bseg-lifnr
      and   lifnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsid
       into table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low.
select bukrs
       kunnr
       augdt
       augbl
       belnr
       budat
       blart
       shkzg
       wrbtr
       from bsad
       appending table it_bsid
       for all entries in gt_bseg
       where bukrs = '1000'
       and   kunnr = gt_bseg-lifnr
      and   kunnr = '0000300000'
       and   budat <= s_budat-low
       and   augdt > s_budat-low.
if it_bsid[] is not initial.
append lines of it_bsid to it_bsik.
endif.
*delete gt_bsegnew where lifnr <> '0000300000'.
*break manukapur.
*sort gt_bsegnew by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*collect wa_bsegnew into gt_bsegnew1.
*endloop.
loop at it_bsik .
it_out2-lifnr = it_bsik-lifnr.
*it_out1-budat = it_bsik-budat.
*it_out1-blart = it_bsik-blart.
if it_bsik-SHKZG = 'H'.
it_out2-wrbtr = it_bsik-wrbtr.
else .
it_out2-wrbtr = it_bsik-wrbtr * -1.
endif.
append it_out2.
clear: it_out2, it_bsik.
*endif.
*clear it1.
endloop.
sort it_out2 by lifnr.
loop at it_out2.
it_out3-lifnr = it_out2-lifnr.
it_out3-wrbtr = it_out2-wrbtr.
collect it_out3.
clear: it_out3, it_out2.
endloop.
endform.
*&      Form sub_process_data
      text
--> p1        text
<-- p2        text
form sub_process_data .
*sort gt_bsegtemp by lifnr .
sort gt_bseg by lifnr bschl.
sort gt_bsegnew by lifnr.
sort it_out3 by lifnr.
*loop at gt_bsegnew into wa_bsegnew.
*at end of lifnr.
*sum.
*endat.
*endloop.
sort gt_bkpf by blart.
loop at gt_bseg into wa_bseg.
if wa_bseg-lifnr is not initial.
read table gt_lfa1 into wa_lfa1 with key lifnr = wa_bseg-lifnr.
move: wa_lfa1-name1 to wa_out-name1,
     wa_lfa1-lifnr to wa_out-lifnr.
read table gt_t005u into wa_t005u with key bland = wa_lfa1-regio.
concatenate wa_lfa1-stras ',' wa_lfa1-ort01 ','
            wa_lfa1-ort02 ',' wa_t005u-bezei ','
            wa_lfa1-pfach ','
            wa_lfa1-pstlz ',' 'Ph:'
            wa_lfa1-telf1 ','
            wa_lfa1-telf2
            into wa_out-addr separated by space.
read table gt_J_1IMOVEND into wa_J_1IMOVEND with key lifnr = wa_bseg-lifnr.
move: wa_J_1IMOVEND-J_1IPANNO to wa_out-J_1IPANNO,
      wa_J_1IMOVEND-J_1ICSTNO to wa_out-J_1ICSTNO,
      wa_J_1IMOVEND-J_1ISERN to wa_out-J_1ISERN.
      read table gt_bkpf into wa_bkpf with key belnr = wa_bseg-belnr.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 31 or
wa_bkpf-blart = 'KR' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-purch = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KR' and wa_bseg-bschl = 50.
*wa_out-tds = wa_out-tds + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-tds = wa_bseg-wrbtr * -1.
endif.
endif.
*wa_out-tds = wa_bseg-wrbtr.
endif.
if wa_bkpf-blart = 'KG' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'RE' and wa_bseg-bschl = 21.
*wa_out-grdeb = wa_out-grdeb + wa_bseg-wrbtr.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-grdeb = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 25
*or wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29
**and wa_bseg-umskz = 'A'
or wa_bkpf-blart = 'SA' and wa_bseg-bschl = 25.
if wa_bseg-shkzg = 'H'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
*wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
wa_out-paym = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DK' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'SA' and wa_bseg-bschl = 31.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 38.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'DZ' and wa_bseg-bschl = 19
and wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 39
and wa_bseg-umskz = 'G' or
       wa_bseg-umskz = 'H' or
       wa_bseg-umskz = 'J' or
       wa_bseg-umskz = 'L' OR
       wa_bseg-umskz = 'A'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'KA' and wa_bseg-bschl = 35.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if ( wa_bkpf-blart = 'KZ' and wa_bseg-bschl = 29 )
   and wa_bseg-umskz = 'A' or
       wa_bseg-umskz = 'B' or
       wa_bseg-umskz = 'I' or
       wa_bseg-umskz = 'M' or
       wa_bseg-umskz = 'O' or
       wa_bseg-umskz = 'V'.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21 .
if wa_bseg-shkzg = 'H'.
wa_out-othcre = wa_bseg-wrbtr.
else.
if wa_bseg-shkzg = 'S'.
wa_out-othcre = wa_bseg-wrbtr * -1.
endif.
endif.
endif.
**if wa_bseg-shkzg = 'H'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr.
**else.
**if wa_bseg-shkzg = 'S'.
***wa_out-purch = wa_out-purch + wa_bseg-wrbtr.
**wa_out-othdeb = wa_bseg-wrbtr * -1.
**endif.
**endif.
**endif.
***if wa_bkpf-blart = 'AB' and wa_bseg-bschl = 27.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
***if wa_bkpf-blart = 'Z1' and wa_bseg-bschl = 21.
      wa_out-othdeb = wa_bseg-wrbtr.
***endif.
read table it_out3 with key lifnr = wa_bseg-lifnr binary search.
on change of wa_bseg-lifnr.
*move: wa_lfa1-name1 to wa_out-name1,
    wa_lfa1-lifnr to wa_out-lifnr.
wa_out-opbal = it_out3-wrbtr.
endon.
*if wa_out-opbal is not initial.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
**else.
*wa_out-bal = wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
*endif.
wa_out-bal = wa_out-opbal + wa_out-purch + wa_out-paym + wa_out-grdeb + wa_out-othdeb + wa_out-othcre.
at end of lifnr.
*wa_out-bal = wa_out-opbal + wa_out-purch - wa_out-grdeb - wa_out-othdeb + wa_out-othcre.
append wa_out to gt_out.
*collect wa_out into gt_out.
clear wa_out.
clear it_out3.
clear wa_bsegnew1.
endat.
endif.
clear: wa_bseg, wa_bkpf, wa_J_1IMOVEND.
endloop.
loop at gt_out into wa_out.
collect wa_out into gt_out1.
endloop.
endform.                    " sub_process_data
Regards,
Santosh Kumar M.

Hi. After I have loaded a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cut, for instance I cannot use Ctrl T to enter free transform mode. Also the toolbar is so small I cannot see the icons without ge

Hi. After loading a picture into Photoshop some of the menu tools are greyed out and I cannot use the keyboard short cuts, for instance I cannot use Ctrl + T for free transform, how do I resolve this problem. In addition the tool Icons are so small I have to get close to the screen to see them, is there anyway the Icons can be made bigger without reducing the resolution of the screen.
Thanks
Derek

Are you working on a background layer? If so, Ctrl + T will not work. Press Alt and double-click your background layer to convert to a normal layer (or right-click BG layer and select Layer from Background) and try again.
If you're working in Photoshop CC 2014 you can go to Preferences > Experimental Features and tick "Scale UI 200% for high-density displays" to make your buttons and icons larger.

Getting core dump when using EXEC SQL CLOSE

In my pro*c program , i have used a cursor to fetch the set of accounts.Once cursor is opened , code will perform set
of operation using fetched data and then cursor is closed. Between open and closing of cursor , i have used 23 EXEC
SQL CLOSE. For example i am copying the value of a to b using strlcpy between fetch and close cursor statement.If
returned value from strlcpy is greater than size of destination variable, then flow should not proceed , in that case I will
close the cursor using EXEC SQL CLOSE and return the flow to calling program. Similarly i have closed the cursor at
another 22 locations.
When i compile the code and run binary the core dump occurs. On analyzing the core it shows
t@null (l@8) terminated by signal SEGV (no mapping at the fault address)
0xffffffffffffffff: <bad address 0xffffffffffffffff>
dbx: core file read error: address 0xfc4ffe48 not in data space
Current function is dbMtBaseClass::Pswd_Change
7860 sqlcxt(&_dbMtCtx, &sqlctx, &sqlstm, &sqlfpn);
if I remove any of the three EXEC SQL CLOSE commands , core dump does not occurs.
It looks strange.Please help me to resolve the issue.

In my pro*c program , i have used a cursor to fetch the set of accounts.Once cursor is opened , code will perform set
of operation using fetched data and then cursor is closed. Between open and closing of cursor , i have used 23 EXEC
SQL CLOSE. For example i am copying the value of a to b using strlcpy between fetch and close cursor statement.If
returned value from strlcpy is greater than size of destination variable, then flow should not proceed , in that case I will
close the cursor using EXEC SQL CLOSE and return the flow to calling program. Similarly i have closed the cursor at
another 22 locations.
When i compile the code and run binary the core dump occurs. On analyzing the core it shows
t@null (l@8) terminated by signal SEGV (no mapping at the fault address)
0xffffffffffffffff: <bad address 0xffffffffffffffff>
dbx: core file read error: address 0xfc4ffe48 not in data space
Current function is dbMtBaseClass::Pswd_Change
7860 sqlcxt(&_dbMtCtx, &sqlctx, &sqlstm, &sqlfpn);
if I remove any of the three EXEC SQL CLOSE commands , core dump does not occurs.
It looks strange.Please help me to resolve the issue.

ORA-01589: must use RESETLOGS or NORESETLOGS option for database open

Hello,
Yesterday i did a clean install of XE on my Windows 7 64bit laptop. The installation went well. Today when i tried to connect to the database i got ORA-01033 initialization or shutdown in progress.
So i started sqlplus as sysdba and executed
SQL> shutdown abort
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 1071333376 bytes
Fixed Size 1388352 bytes
Variable Size 620757184 bytes
Database Buffers 444596224 bytes
Redo Buffers 4591616 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
The alert log is showing the following output
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production.
Using parameter settings in server-side pfile C:\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DATABASE\INITXE.ORA
System parameters with non-default values:
sessions = 176
spfile = "C:\ORACLE\APP\ORACLE\PRODUCT\11.2.0\SERVER\DBS\SPFILEXE.ORA"
memory_target = 1G
control_files = "C:\ORACLE\APP\ORACLE\ORADATA\XE\CONTROL.DBF"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "C:\oracle\app\oracle\fast_recovery_area"
db_recovery_file_dest_size= 10G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "C:\ORACLE\APP\ORACLE\ADMIN\XE\ADUMP"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "C:\ORACLE\APP\ORACLE"
Wed Sep 07 09:26:50 2011
PMON started with pid=2, OS id=4936
Wed Sep 07 09:26:50 2011
PSP0 started with pid=3, OS id=4756
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !
Wed Sep 07 09:26:51 2011
VKTM started with pid=4, OS id=5772 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Wed Sep 07 09:26:51 2011
GEN0 started with pid=5, OS id=5424
Wed Sep 07 09:26:51 2011
DIAG started with pid=6, OS id=5928
Wed Sep 07 09:26:51 2011
DBRM started with pid=7, OS id=4000
Wed Sep 07 09:26:51 2011
DIA0 started with pid=8, OS id=3876
Wed Sep 07 09:26:51 2011
MMAN started with pid=9, OS id=6004
Wed Sep 07 09:26:51 2011
DBW0 started with pid=10, OS id=5252
Wed Sep 07 09:26:51 2011
LGWR started with pid=11, OS id=848
Wed Sep 07 09:26:51 2011
CKPT started with pid=12, OS id=2420
Wed Sep 07 09:26:51 2011
SMON started with pid=13, OS id=2424
Wed Sep 07 09:26:51 2011
RECO started with pid=14, OS id=2396
Wed Sep 07 09:26:51 2011
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Wed Sep 07 09:26:51 2011
MMON started with pid=15, OS id=2388
starting up 4 shared server(s) ...
ORACLE_BASE from environment = C:\oracle\app\oracle
Wed Sep 07 09:26:51 2011
ALTER DATABASE MOUNT
Wed Sep 07 09:26:51 2011
MMNL started with pid=16, OS id=1288
Successful mount of redo thread 1, with mount id 2642331547
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Wed Sep 07 09:26:56 2011
ALTER DATABASE OPEN
Errors in file C:\ORACLE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_2212.trc:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
ORA-1589 signalled during: ALTER DATABASE OPEN...
Wed Sep 07 09:41:54 2011
db_recovery_file_dest_size of 10240 MB is 0.98% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Can anybody tell me what to do to solve this problem?
Kind Regards,
D.

DennisV wrote:
Starting ORACLE instance (normal)What do you have in the alert.log above that line?
OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified !This is one of the symptoms reported earlier when running on unsupported platform (x64) and maybe there's some connection with your issue.
See {thread:id=2278170}.
Errors in file C:\ORACLE\APP\ORACLE\diag\rdbms\xe\xe\trace\xe_ora_2212.trc:What errors does trace file reveal?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

V4.0 won't start. crashes each time. Had to go back to previous version. Version 4 is just not ready for general release, it is massively messed up. The online fixes here had no effect whatsoever. VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

tried automatic upgrade from within 3.6.. did not work..crashed upon re-start. tried remove program completely for a fresh install..same thing crash upon V4.0 start up....
Reinstalled 3.6.15...
4.0 is NOT READY for general release. Tried the fixes as suggested here, but they were useless and no help what-so-ever.
Very dissapointing, as I've been using Firefox as my only browser since it was introduced years ago.. this may be the end of the line....VERY DISSAPOINTED

Download to application server using job open/close

Hello people,
Currently I am using open/close dataset to download to the application server automatically. What I do here is submit a program execute in background when the report is done the report is automatically downloaded to the application server.
My problem now is that I want to use job open/close. With this, unfortunatley, my current method of open/close dataset will be unsuable to download to application server once the background job is done.
My question is, is there a way for me to automatically download a file to the application server using the job open/close method?
Thank you so much and take care.

<b>Hi,
What you can do is to write a report program that downloads the data to the file on the app server.
Now, you can use the JOB_OPEN and JOB_CLOSE and submit this program in the background which will write the file.
Regards,
Ravi</b>
So what you are saying is that I create two programs, where the job open/close program is the one I will run?
Problem is that I plan to get the values of the selection-options from the original program using the program with the job open/close. How will that work.
Thanks

Is it possible to use the same OSSO/OID for multiple R11 and R12 instances?

Hello guru's,
We have multiple R11and R12 instances that should be configured for Oracle SSO 10.1.4.3. For OID, we are still trying to decide between OID 10.1.4.3, or OID 11g. OAM is not an option because we also also need OSSO integration with Siteminder. We will also need to SSO-enable Discoverer an Forms.
I have successfully configured SSO for a single-instance EBS R12, but not for multiple instances, let alone include R11 and other components into the mix.
Do you have any special tips, guidance or lessons learned when SSO-enabling multiple instances into the same SSO/OID?
Thanks!
Maria

Interestingly, the article talks about using the same SSO/OID for EBS, JD Edwards, Peoplesoft multiple R11 instances, but did not mention 'multiple EBS versions'. Am I just being picky or there was a reason for it not being mentioned?In Steven Chan blog (in the same link), see the following:
Comprehensive Single Sign-On Solution+
If you have one or more E-Business Suite Release 11i instances and are tired of maintaining users separately for each environment, you can create a central OracleAS 10g environment and manage all 11i users in one place.
If you have a combination of PeopleSoft, JD Edwards, and the E-Business Suite in your organization, you can use OracleAS 10g to manage users for all three environments centrally.
If you have a combination of the E-Business Suite and custom applications based on Oracle databases or OracleAS 10g technology, you can use OracleAS 10g to manage users for all applications in a single place.
Thanks,
Hussein

Using CRQ to close ASN for SA Release

Similar Messages

Maybe you are looking for