Using cumulative distribution graphs

Is there a cumulative distribution graph in version 2008?

You can do a HISTOGRAM in the Graph Expert. Or you can "roll your own" using a line or scatter graph mapped against a function you provide.
If all else fails (which it shouldn't), track down our CRChart add-in for CR2008, which has better support for statistical charting inside of CR.
-Dan
DISCLAIMER: I work for the company, threedgraphics.com, that makes CRChart. This product costs money.

Similar Messages

Newbie Question - Distribution Graphs in Discoverer

Hi there,
I don't seem to be able to produce simple population distribution graphs in Discoverer (10g) Desktop or Plus. I'm trying to graph something as simple as #Students over Age from a simple corresponding table.
Discoverer is not presenting me with options to select the source of Y axis and X axis values with (for example) a Fit to Curve graph type. All Discoverer does is assume that each of your columns are seperate series' which it will graph on the same page.
Any advice is most welcome - I'm sure there's something simple that I'm not doing right...
Thanks
Dennis

Hi. Did you ever resolve this issue? I have not used this version before and cannot fathom why you cannot amend x or Y axis sources. For example, we have added the percentages to a report between compliant and non compliant spend. We want to represent the trend of the percentages in a graph. However, we cannot because the data being picked up is the spend on the Y axis, not the percentages.
Any ideas?

Cumulative Distribution Functions

Like a fool, I sold my first year statistics textbook and have regretted it ever since. Help a guy out?
It goes like this: I have two random variables, X and Y, for which I know the cumulative distribution functions. I have a third random variable Z, which is just X + Y. Is there a formula calculating the CDF of Z from the CDFs of X and Y?

Your textbook wouldn't have helped you in this case
because there is no such formula... for the generalSorry to contradict you but there is a 'formula' but it is not simple. The text book should have helped.
The Distibution Function (DF) of the sum of two independent random variables is the convolution of the DF's of the two values. So if one differentiates the two CDFs to get the DFs, convolves the result to get the DF of the sum one can then integrate the convolution result to get the CDF of the sum (Wow).
This can be done numerically using several appraches. I have used the Fast Fourier Transform to perform convolution, differentiation and integration but not in this combination. This would be one approach I would consider but it may not be the best.
When I first saw this posted I looked at how one might create the CDF without differentiating the individual CDFs because this step is 'noisy' but I could not find a simple approach. I'm sure there is one but I have not found it.
Using the central limit theorem to obtain an approximation to the PDF is feasable if X and Y have a uni-modal distribution and the variances are similar is size. In the good old days of my using an IBM 360 I used IBM's normal distribution random number generator that just added together 6 samples of a uniform random number generator.

How to draw cumulative line graph over the stacked bar chart?(SSRS)

Hello,
I need your help to draw a cumulative line graph over this bar chart.
I need your help to draw a cumulative line graph over this bar chart in SSRS.
The dimension (Category Group) is "Hour" in this case. and expression is sum of two distinct values like 'Y' and 'N' in Activity column(Series Groups). The sum(Activity=Y) in green color and sum(Activity='N') in Red color.
I require to draw a cumulative line graph in this same chart, that should give the result of cumulative Sum(Activity) for each hour?? I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
I mean sum of (Y+N) for each hour and that should be cumulative over the hour.
SSRS Version details:
Microsoft SQL Server Reporting Services Designers
Version 10.50.1600.1
--Siva

Hi Siva,
It seems that you need to verify your email address to post images, etc
Besides, Microsoft® SQL Server™ 2008 Reporting Services: Step by Step is a good choice to you. With STEP BY STEP, you work at your own pace through hands-on, learn-by-doing exercises. A companion CD includes data sets and sample code. You can download
it from this link http://my.safaribooksonline.com/9780735626041 Click the Extras, you can get the samples and database from Supplemental Content.
And there are vast of valuable articles and SQL Server Reporting Services Books Online in MSDN ,you can click these link to begin your learning journey, SQL Server Reporting Services 2008 Books Online:
http://msdn.microsoft.com/en-us/library/ms159106(v=SQL.100).aspx
Besides these, there are still many valuable videos in Microsoft Webcast, click this link
https://msevents.microsoft.com/cui/SearchDisplay.aspx?culture=en-US#culture=en-US;eventType=0;sortKey=;sortOrder=;pageEvent=false;hdnInitialCount=;searchcontrol=yes;kwdAny=Reporting%20service to register with a windows live ID, then download the ones you
want.
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

Using cumulated values for further calculation in a bex report

Hi ya'll,
I have a problem with using cumulated values in a bex report.
the report has three lines:
Values 1:    100    200 300
Values 2:    10      5     40
Values 3:    1000 500 4000
The values of row 3 is a formula multiplying the values from row 1 and 2... My problem is that the values of row 3 are wrong - for example 200*5 isn't supposed to result in 500 !!
I figure the reason is that the values of row 1 is a cumulated result, meaning the <i>actual</i> value of the second column of the first row i 100 (and not 200).
How can I ensure that my formula for row 3 uses the <b>cumulated</b> result from row 1, instead of the underlying result ?.

Create a column structure with Actual Value columns as well as cumulated value columns. Hide Actual Value Columns from display.
Example :
Actual1 | Actual 2 | Actual 3 | *** 1 | *** 2 | *** 3 |
100 | 100 | 100 | 100 | 200 | 300 |
You can create a forumla to calculate Value 3 : (Actual 1 * Value 2 ).
I guess you are using Cell Referencing to achieve this.

Use of distribution model

Hi ,
Is distribution model necessary while sending Idocs to other system ?
Regards,
Pradeep

Hi Pradeep,
Well sumone has already correctly replied that Destribution model determines the inrested receipient for perticular message, if u see while creating DM you need to specify the logical system of partners exchangin data along with the messages that would be exchanged and then the partner profiles that you generate with those logical system names specify the detailed info as in which structure (basic type/extension) to be used , wht port/prcoess code to be used
So distribution model jst gives high level info as in wht type of data is exchanged between which pair of partners.. n partner profile gives details of various technical objects to be used..
I would also like to make note that maintaining a DM in sending system is a MUST as in the ALE layer 1st thing done is receiver determination for which DM is used so if u do not make a DM well ur communication IDoc will not be created.. that is no IDoc will be sent outside.. in this holds true even if u r using custom IDocs
Regards
Ashwinee Mali

Can I use Power BI graphs on non-desktop's Internet Explorer ?

Can I use Power BI graphs on non-desktop's Internet Explorer ?
I want to use Power BI graphs web page on non-desktop's Internet Explorer.
Now, I try it, get alerts Silverlight need.
and I still installed on my Windows 8.1.
and I can use Power BI graphs on desktop's Internet Explorer.
But, I cannot use Silverlight on non-desktop's Internet Explorer.
Regards,
Yoshihiro Kawabata

Dear Yoshihiro,
Got it, I see your point, will check with the team why we don't default here to HTML5
Did you look at using the Power BI App?
http://apps.microsoft.com/windows/en-us/app/microsoft-power-bi/b7e7c94d-2ea3-4fa6-a277-9d19a1f697ba
And I can think of other workarounds but it really depends on the scenario. If you wish to share some more info please send us a mail to
this address.
Guy
GALROY

Using new Distribution Channel for dealers.

Hi experts
Currently Domestic sales is operating only on one channel DD.
Proposal is to set DR channels for all Dealers sales and DD will be used only for Retail Sales .
DR Channel was previously configured but we were only using DD channel for both retailors & dealers sales.. all configuration is already done like sales area setup and pricing etc. for DR channel
so i would like to what are the pros and cons for using two Distribution channel and maintainence we require.
thank you

You need to extend all customers and materials for new distribution channel.
You also neeed to maintain prices for DD and DR channels separately.
ITs advantage is this that your reporting will be separately executed. You can check how much sales you have done in retail and how much you have done in Whole sale.
I dont know what kind of business your company is running. I suggest you to make a provision for 3rd distribution channel which is DC. B2B sales. corporate sales. May after some months or years your company feel need of it.
For extending customers and materials 2 uploads will do this. Ask you ABAPER to create uploads.
There must be separate distribution channels for corporate, retail, wholesale and Expots if your company is dealing with exports sale.
Hope its clear to you now

How to send email to external users using the distribution list from workflow

I have created distribution list in SO23 with external email addresses.
How I can use distribution list in "Send Mail component" or I should use another component?
It works fine for a single email address. And distribution list works fine when I use it via SBWP.

Hi,
Take activity step instead of Mail step. User fm SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
And use fm SO_DLI_READ_API1 to find list of user from distribution list. You can find how to use this fm in rule 30000012

ALE: how do I use dependent distribution for customer and vendor addresses?

Hello SDN'ers
Hopefully someone can help me with an ALE question.
We have two ERP systems connected with ERP - Retail and AFS.
Customers and Vendors may be created in Retail, and are distributed to AFS using DEBMAS, CREMAS and ADRMAS messages.
Not all customers and vendors are required in AFS, so we have various filters set up in the Retail distribution model (BD64).
However with the filters in place, addresses were still being distributed for customers and vendors that had been filtered out.
To try and avoid this for vendors, we created a filter group for AddressOrg.SaveReplica in receiver determination. In the filter group we selected Dependent Distribution for CREMAS (Address owner object).
This works perfectly for vendors - vendor addresses are now only distributed if the vendor itself is distributed.
However I've now discovered it is preventing any customer addresses from being sent! I was surprised about this: I expected CREMAS dependency to only affect vendor addresses. Can someone tell me:
- is this how dependent distribution is designed to work? In which case can anyone offer any suffestions to achieve the filtering some other way?
- or are we doing something wrong to be getting this result?
Thanks for any help!
regards, Roger

Hi all,
as Robert suggested, I've written an exit to get round this, although I'm surprised I should need to!
What I did was to code an enhancement in function group BDBF, at the start of subroutine COMPUTE_LOGIC_EXPRESSION.
* In the case of addresses, dependencies should only be applied for the appropriate type of address
data: lwa_tbd14 type tbd14.
if P_MODEL_DATA-FTYPE = C_FTYPE_DEPENDENCY_FROM_MESTYP.
*   Dependency from Message Type.
*   Read the Address Object type
    READ TABLE P_FILTER_VALUES
                     WITH KEY OBJTYPE = 'AD_OBJTYPE'
                     BINARY SEARCH.
    if sy-subrc = 0.
*     Check if the Message Type is linked to the Address Owner Object Type
*     (Table is buffered on DB)
      select single *
        from TBD14
        into lwa_tbd14
       where MESTYP = P_MODEL_DATA-FMESTYP
         and OBJTYP = P_FILTER_VALUES-OBJVALUE.
      if sy-subrc <> 0.
*       Wrong type of address for this dependency - stop here
        P_REPLICATE = c_true.
        exit.
      else.
*       Correct address type. Standard processing continues, checking any
*       filter values set up against the Address Owner Object Type.
      endif.
    else.
*     It isn't an address - continue with standard processing
    endif.
endif.
Let me know if this helps you, or if you know of a better way to achieve the same result.
Roger

Using a waveform graph, how to get all recorded data graphed?

I record data from 6 channels using DAQmx with simulated channels and write to measurement file. Then using read from measurement file, and waveform graph, I am trying to graph the data that has been recorded. I am only getting a small amount graphed. The same graph appears whether I have let the measure and record program run for 1 minute or for ten minutes. It also displays a time at the end of the graph that is in the future. What am I doing wrong? Please help.
Hillis Pratt, Jr.

I am attaching the two VIs I have been trying to use. I started with examples from NI and didn't go far from that. Any assistance would be appreciated.
Attachments:
Measure and Record Six Voltages with Express1.vi ‏119 KB
Graph Measurement Files1.vi ‏89 KB

Xslt graph in a rtf template. Can an external variable be used inside the graph definition?

I'm working with BI Publisher 10g, building an rtf template that would display a table and a graph by iterating on one of the xml tags from the input file.
I got the table working using am xslt variable set when the xml tag associated value changes (DATAGROUPID).
<?for-each:(/DATA/SITE/SITE_DATA)?> <?sort:DATAGROUPID;'ascending';data-type='number'?>
<?xdoxslt:set_variable($_XDOCTX,'SITE',DATAGROUPID)?>
<?for-each:(/DATA//DIMS/LOCALES[LOCALE = 'en']/TEXT)?><?sort:DIMNAME;'ascending';data-type='text'?>
<?xdoxslt:set_variable($_XDOCTX,'DIMID',DIMID)?>
<?round(/DATA/SITE/SITE_DATA[DATAGROUPID = xdoxslt:get_variable($_XDOCTX,'SITE')]/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = xdoxslt:get_variable($_XDOCTX,'DIMID')]/ITEM[ITEMID = 0]/PFAV)?>
<?end for-each?>
chart:
<Graph seriesEffect="SE_AUTO_GRADIENT" graphType="BAR_VERT_PERCENT" autoLayout="AL_AS_NEEDED">
<LegendArea visible="true" automaticPlacement="AP_NEVER" position="LAP_BOTTOM"/>
<SeriesItems>
<Series id="0" color="#FF0000"/>
<Series id="1" color="#FFFF00"/>
<Series id="2" color="#00FF00"/>
</SeriesItems>
<MarkerText visible="true" markerTextPlace="MTP_CENTER">
<GraphFont name="Arial" size="20" bold="true" italic="false" underline="false"/>
<Y1ViewFormat>
<ViewFormat decimalDigit="0" decimalSeparatorUsed="true" decimalDigitUsed="true"/>
</Y1ViewFormat>
</MarkerText>
<LegendText>
<GraphFont name="Arial" size="20" bold="false" italic="false" underline="false"/>
</LegendText>
<Y1TickLabel>
<GraphFont name="Arial" size="12" bold="false" italic="false" underline="false"/>
</Y1TickLabel>
<O1TickLabel wordWrapEnabled="false" tickLabelStaggered="false">
<GraphFont name="Arial" size="20" bold="true" italic="false" underline="false"/>
</O1TickLabel>
<LocalGridData colCount="{count(xdoxslt:group(/DATA/SITE/SITE_DATA/YEAR[SURVEYYEAR = 2012]/DIM, 'DIMID'))}" rowCount="3">
<RowLabels>
<Label>Unfavorable        </Label>
<Label>Neutral</Label>
<Label>Favorable</Label>
</RowLabels>
<ColLabels>
<xsl:for-each select="/DATA/DIMS/LOCALES[LOCALE = 'en']/TEXT">
<xsl:sort select="DIMNAME"/>
<Label>
<xsl:value-of select="DIMNAME"/>
</Label>
</xsl:for-each>
</ColLabels>
<DataValues>
<RowData>
<xsl:for-each select="/DATA/DIMS/LOCALES[LOCALE = 'en']/TEXT">
<xsl:sort select="DIMNAME"/>
<Cell>
<xsl:variable name="DIMID" select="DIMID"/>
<xsl:value-of select="/DATA/SITE/SITE_DATA/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = $DIMID]/ITEM[ITEMID = 0 and PUNFAV != 0]/PUNFAV"/>
</Cell>
</xsl:for-each>
</RowData>
<RowData>
<xsl:for-each select="/DATA/DIMS/LOCALES[LOCALE = 'en']/TEXT">
<xsl:sort select="DIMNAME"/>
<Cell>
<xsl:variable name="DIMID" select="DIMID"/>
<xsl:value-of select="/DATA/SITE/SITE_DATA/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = $DIMID]/ITEM[ITEMID = 0 and PNEU != 0]/PNEU"/>
</Cell>
</xsl:for-each>
</RowData>
<RowData>
<xsl:for-each select="/DATA/DIMS/LOCALES[LOCALE = 'en']/TEXT">
<xsl:sort select="DIMNAME"/>
<Cell>
<xsl:variable name="DIMID" select="DIMID"/>
<xsl:value-of select="/DATA/SITE/SITE_DATA/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = $DIMID]/ITEM[ITEMID = 0 and PFAV !=0]/PFAV"/>
</Cell>
</xsl:for-each>
</RowData>
</DataValues>
</LocalGridData>
</Graph>
<?end for-each?>
So, on the table this line gets the correct variable from the input file:
<?round(/DATA/SITE/SITE_DATA[DATAGROUPID = xdoxslt:get_variable($_XDOCTX,'SITE')]/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = xdoxslt:get_variable($_XDOCTX,'DIMID')]/ITEM[ITEMID = 0]/PFAV)?>
How can I replicate that logic inside the table definition?
<xsl:value-of select="/DATA/SITE/SITE_DATA/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = $DIMID]/ITEM[ITEMID = 0 and PFAV !=0]/PFAV"/>
Input data looks like this:
<DATA>
- <SITE>
- <SITE_DATA>
<DATAGROUPID>1032817</DATAGROUPID>
<DATAGROUPNAME>My Sales</DATAGROUPNAME>
- <YEAR>
<SURVEYYEAR>2012</SURVEYYEAR>
- <DIM>
<DIMID>1</DIMID>
- <ITEM>
<ITEMID>0</ITEMID>
<PFAV>88</PFAV>
<PNEU>13</PNEU>
<PUNFAV>0</PUNFAV>
- <ITEM>
<ITEMID>40</ITEMID>
<PFAV>100</PFAV>
<PNEU>0</PNEU>
<PUNFAV>0</PUNFAV>
</ITEM>
</DIM>
</YEAR>
</SITE_DATA>
- <SITE_DATA>
<DATAGROUPID>1032816</DATAGROUPID>
<DATAGROUPNAME>Your Sales</DATAGROUPNAME>
- <YEAR>
<SURVEYYEAR>2012</SURVEYYEAR>
- <DIM>
<DIMID>1</DIMID>
- <ITEM>
<ITEMID>0</ITEMID>
<PFAV>71</PFAV>
<PNEU>25</PNEU>
<PUNFAV>4</PUNFAV>
I can include a complete sample on request, I thought this would be enough to illustrate the issue.
I'll appreciate any help you can provide.

I kept researching, I found some possible solution in this blog:
https://blogs.oracle.com/xmlpublisher/category/Oracle/Templates/RTF
so, I created a local SITE variable inside every cell to get the external SITE info:
<Cell>
<xsl:variable name="DIMID" select="DIMID"/>
<xsl:variable name="SITE" select="{xdoxslt:get_variable($_XDOCTX,'SITE')}"/>
<xsl:value-of select="/DATA/SITE/SITE_DATA[DATAGROUPID = $SITE]/YEAR[SURVEYYEAR = 2012]/DIM[DIMID = $DIMID]/ITEM[ITEMID = 0 and PUNFAV != 0]/PFAV"/>
</Cell>
but I get this error at run time:
oracle.xdo.parser.v2.XPathException: Error in expression: '{xdoxslt:get_variable($_XDOCTX,'SITE')}'.
    at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
    at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
    ... 14 more
What am I doing wrong?

How to use cumulative Value in a formula

Hello Gurus,
I would like to use the cumulative value in a query as part of a formula calculation. I have created a KF which is assigned a constant value 1. When displaying the KF I am cumulating it so for each row I am getting 1,2,3,4...etc. How can I use this cumulated value in a formula calculation?
For example, in a column cumulative count is 1,2,3,4...etc .My requirement is ,i want to identify the record with number 36 , to do this i have created a formula with boolean Equal to function comparing with the required number, but the boolean result what am i getting is Zero instead of one(1).
The reason i found behind the problem is, the cumulative count that we see is dynamically happening during the run time for display ,but the internal value is 1 only.
Is there any other way to meet this requirement or am i missing anypoint?.
Thanks.

Dear Yaseen,
To get the value in formula cumulative,after you have created the formula for that particular key figure,go to edit and click on tab "calculations".
In that select overall result as 'count all values not equal to zero' and single result as 'count all values not equal to zero' .
And mark the cumulative check box underneath.
I hope you get the desired result and please do me favour .
Sumit goomber

Use of Distribution model in Idoc to file

Hey guys
just outta curiosity,why do we need to create distribution model for IDOC to file scenario,we can ofcourse do the scenario without creating Distribution model (by using WE19 to send IDOC's).
is it because for day to day transactions we wont go for WE19(its just for test purposes),we rely on Distribution model?
also is it job of XI developer to create DM ?
thanx
ahmad

Ahmad,
BD 64 Distribution model allowed you to automatically create the Logical Systems ( BD54 ) and the partner profiles.
The steps you create to send an Idoc from your R3 system to XI ,( Bd54, we20 ) etc are all nothing but steps in the Distribution Model Bd 64 to send an Idoc to XI,
Regards
Bhavesh

Using Cumulative Condition Type KUMU

Dear SAP Gurus
I have a requirement here that when a packaged item is sold with some accessories, the order confirmation and billing output should only showed the total price on the main item. We are not using sales bom for this purpose.
For example in SAP order entry screen:
Line 1      Main item   net price $100
Line 2      accessory   net price $ 20
But on billing output to show:
Line 1      Main item   net price $120.00
Line 2      accessory   net price $    0.00
I am planning to use KUMU condition type to capture all the total net price of the 2 items into line 1.
Is it normal for KUMU to be determined at the sub items as well ?
Any ideas on how we could control the output print logic ? i.e to print only the KUMU condition type on main item if it exist.
Thanks

Hi friend,
As per my information KUMU is a cumulative condition. If you have sales BOM and if you carry pricing for the sub items and if you want to display the main item in the invoice with the price. This condition can be used to cumulate the sub item price and display it at the main item level.
I think this might be given you a idea of this condition type
As pe my knowledge...
The standard system condition type KUMU facilitate us to display the total of the net values of an item and all the sub-items belonging to that item.
Line: -
Constraints OF KUMU cumulative condition type -
Cumulative conditions cannot be used as header conditions and processed manually.
When we copy a S O (sales Order) to a billing doc, the condition rate and the condition value of a cumulative condition is Freez. This means that the condition is not redetermined when it is copied regardless of the pricing type. The net value of the total is not redetermined even if the individual net values have changed.
as already suggested KUMU condition is used as item condition.This is a statistical condition and alternative calculation type is 36.The item should be higher level item and prices of all lower level items assigned to this higher level item are cumulated.
Regards,
Rajeev Sharma

Using cumulative distribution graphs

Similar Messages

Maybe you are looking for