Using CUPS to set page limits on Leopard with shared printers
Hello all,
I'm attempting to share a printer (HP LaserJet 5200) connected via USB with a lab of iMacs. All machines are running Leopard. The version of cups is 1.3.8. I have configured the printer on the "server" machine using the web interface. I have tried two methods of setting page limits, both the command line entry (sudo lpadmin -p printerName -o job-page-limit=100) and editing the /etc/cups/printer.conf file to reflect the limit I want.
When I print, however, the limits are not obeyed. They still appear in the config file, but printing from both the host machine and the client machines on the LAN is not affected by the limits. Does anyone have any idea what is overriding the config files or why they are not affecting the printing process?
Many thanks,
-Scott
hi John, this is what is registered in the log:
printer sp67 9 [03/Nov/2008:09:50:46 -0500] 1 1DEBUG: Read 8192 bytes of print data... - fe80::222:41ff:fe2a:8948%en0
printer sp67 10 [03/Nov/2008:09:51:33 -0500] 1 1DEBUG: Read 8192 bytes of print data... - fe80::222:41ff:fe2a:8948%en0
printer sp67 15 [04/Nov/2008:13:19:34 -0500] 1 1 - 128.36.43.202
printer sp67 16 [04/Nov/2008:13:21:18 -0500] 1 1 - 128.36.43.202
I've recently installed the beta 1.4 version, and I now quotas *sort of* work... that is, I get the "quota exceeded" notification when I run jobs from the command line (using lp), but if I immediately run the same command again, it forgets about the quota and prints anyway.
The same appears to happen from a remote machine; first an error is given, but if i attempt to print again, it goes through...
Many thanks for your assistance.
-S
Similar Messages
-
How to set up iOS calendar app with shared Google Calendar data
At work (in our small office) I've been given access to the shared Google Calendar that has our work schedule. It was set up using this page (click on Share an existing calendar):
https://support.google.com/calendar/answer/37082
The question I have is how to set it up to work with iOS calendar app on my iPhone?"currently there is no shared group calendar support."
Well, not really. You hinted at it with: "set up a group wiki."
Go into Workgroup Manager and set up an Open Directory group. Add people to it.
Each client must then go into iCal --> Preferences --> Accounts and add an account. The name and password entered must be the same as that added to the group, Kerberos must be unchecked, and the account URL will be like (fill in the blanks properly):
http://<your domain name here>:8008/principals/groups/<your group name here>/
Now each properly logged in user of that group can make changes to the shared group calendar, without any "hacks" like making dummy users and delegation.
However, I am getting a notifier: "Request Error: Accesss to <event name> in <your group name here> in account <your group name here> is not permitted." But that seems to be a lie, since multiple members of the group can make changes and others can see the changes.
Oh yea, make sure you have a functioning DNS with valid reverse lookup.
Message was edited by: Bytesmiths -
Programmatically Set Page Setup when printing with Internet Explorer?
Hello,
I'm using the LabVIEW 7.1 Print HTML Report VIs.
However, I'd like to change the default margings and footer and headres of Microsoft internet explorer which is used to do the actual printing.
I tried to find a way using the functionality of IWebBrowser2 (Wich is actaully used by the original VIs). It seems I have to use OLECMDID_GETPRINTTEMPLATE and pass a structure of the type ITemplatePrinter.
How can this be done - or is there a more simple way to do this?
Thanx,
RainerI'm looking for the same features. Ideally you would be able to send the page setup parameters to IE programatically but so far I've had no luck doing that or finding any reference on how it would be done. The closest thing I've seen is the print templates, but I am still unsure how those would be implemented exactly. I did find this reference for the template which seems fairly descriptive:
http://msdn2.microsoft.com/en-us/library/bb250434.aspx
Message Edited by Deej60 on 04-03-2007 06:17 PM -
Can't use iPhoto Album as Screensaver in Snow Leopard with iLife '11?
I just upgraded my iMac to Snow Leopard (10.6.3) so I could install iLife '11.
After installing both, I noticed my screen saver wasn't using the iPhoto album I had originally selected before the upgrade.
When going to System Preferences > Destop & Screen Saver > Screen Saver the options are:
Apple
Arabesque
Computer Name
Flurry
iTunes Artwork
RSS Visualizer
Shell
Spectrum
Word of the Day
Pictures
Shuffle
Abstract
Beach
Cosmos
Forest
Nature Patterns
Paper Shadow
There used to be an option for iPhoto albums, or am I just not seeing something?
Thanks,
Rob
Thanks!
RobiPhoto forum:
https://discussions.apple.com/community/ilife/iphoto -
How to Submit a Concurrent Request Set Using a Self-Service Page
Hi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
BenchHi all,
I would like to know how to Run/Submit a Concurrent Request Set Using a Self-Service Page
Thanks.
Bench -
How to use AppleScript to set "character fill color" in Pages 5.2?
For Pages 5.2 on OSX 10.9.3, what is the correct applescript for changing the "character fill" of text in pages.
If you highlight text, you do this via your mouse in the inspector by clicking "style," "advanced option (the gear wheel to the right of bold, italics, and underline), "character fill color (clicking on the multi-color circle, not the dropdown menu), and then choosing a color that comes up in the "colors" dialogue box.
I've looked all over and cannot find how to use applescript to set the character fill color in pages.
In some examples (not directly related) I see "character fill" used.
In others, I see "colorfill."
Basically, I want to use applescript, embedded in a keyboard maestro macro, to change the background color of the text (not the text color itself) to particular colors.
Given the changes and updates to Pages this year, and to applescript, what's the easy way to do this?
Thanks!
ChuckPages v5.2 still does not include selection-object, or character background color entries in its AppleScript dictionary, as does Pages ’09. Indirectly, using System Events, you can get the text selection in Pages v5.2, but then you can do nothing to change the selection. No assurances as to if or when Apple will mature the AppleScript dictionary support for Pages v5 series.
-
I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications. I haven't ever used time machine to back up (my bad I know). Is there a way to go back to snow leopard with messing up all my files and my set?
Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance. -
Trouble printing with my HP Deskjet printer using CUPS and hplip
tl;dr This 1,646 word post describes my frustration with CUPS and hplip. I cannot get my HP Deskjet F4400 set up with CUPS, and all the solutions I've tried don't work.
I'm running Arch Linux ARM on my Seagate DockStar, a small ARM-based "plug computer" that I use as a home server. My printer is the HP Deskjet F4480, which is part of the HP Deskjet F4400 series.
I previously had CUPS set up to share my printer with my home network, using hplip for the printer driver. I never upgraded CUPS or hplip because those versions worked fine, and I didn't want to break anything avoid breaking anything. The versions that I was using had to have been at least one to two years old.
Everything was working very smoothly... until a few days ago. The drive I was running Arch Linux ARM on became corrupt, so I had to install a fresh copy of the operating system. That meant losing all of the working versions and configuration files each application I had installed, including CUPS. I thought I had a backup image of the drive, but it didn't work when I tried to restore it. (Yes, it was stupid of me not to test my backup.)
Setting up CUPS was one of the first things that I wanted to do after reinstalling, since my family depends on the network printing functionality almost daily. Unfortunately, I could not get CUPS to work with my printer correctly. It wouldn't be able to display a list of drivers, HP's setup utility encountered an error adding it, and it threw various errors when I tried to print test pages. I ended up reading hundreds of forum posts, wiki articles, and CUPS/hplip tutorials to try to figure out how to properly set it up. I ended up spending a total of nearly ten hours trying to get the printer to print with CUPS, and it's still not working after all that work.
I'm going to explain in this post some of the many things that I've tried so far. I just removed all of the printing packages from my system and any extra files that were left behind. I'm now going to be installing all of the packages again and documenting everything that I have been trying to do to get it to work. I'll try to include exact error messages and logs where necessary.
1. I first found this article on the Arch Linux ARM website on how to set up a CUPS printer. I didn't really want to use webmin, but I did it anyway so that I could follow the guide. I installed all the packages mentioned except for cups-pdf, since I didn't need print to PDF support. Everything installed smoothly, and I configured CUPS and webmin to allow access to other computers on the network. I started to notice problems in the instructions - /etc/rc.d/cups was actually /etc/rc.d/cupsd, /etc/printers.conf was actually /etc/cups/printers.conf, and webmin didn't actually add anything to the printers.conf file. I uninstalled webmin at this point because I didn't need it, and I decided I wasn't going to follow that guide with incorrect information.
2. I then tried to set up the printer on my own using the CUPS web interface listening on port 631. I clicked the Add Printer button and it switched me to the HTTPS web interface. I then logged into the root account and was presented with the list of printers. My printer was listed as "HP Deskjet F4400 series (HP Deskjet F4400 series)", so I selected it and continued. I saw a list of printer models (PPD files) ending in CUPS+Gutenprint v5.2.9. There was no entry for my printer, so I tried the "HP DeskJet Series (en)" one. I set the default options and chose Maintenaince->Print test page. I then got a ridiculously simple error: "Unable to print test page: No such file or directory". How do I even know what file or directory it's referencing? I read online that it may be because I'm not in the lp group, but root is indeed in there. I saw in the error log "Avahi client failed: -26". I started dbus and avahi-daemon just in case, but I still got that silly error. I restarted cups and the same error message occured.
3. I researched online that pretty much the only way for my printer to have a driver would be to install hplip. Before installing hplip, I uninstalled CUPS, leaving cupsd.conf but deleting printers.conf. Then I installed CUPS and hplip together, with hplip requiring foomatic-db, foomatic-db-engine, and foomatic-filters. Everything seemed to install correctly. I started CUPS again and then ran hp-setup -i to try to install my printer. I selected USB and it found my printer, hp:/usb/Deskjet_F4400_series?serial=[printer serial number here]. I entered a simple name and then was told that no PPD file was found for the printer but that I could specify one manually. There were none I could find online; everywhere it just said to install hplip. I used the find command to find "f4400" and finally found 2 compressed PPDs located at /usr/share/ppd/HP/hp-deskjet_f4400_series-hpijs.ppd.gz and /usr/share/ppd/HP/hp-deskjet_f4400_series.ppd.gz. I gunzipped both of them and pointed hpsetup to the hpijs one, knowing that I was using the hpijs one when it was working before. It told me "Description for the file: HP Deskjet f4400 Series hpijs, 3.12.6". Hooray! I selected to use it, but then setup failed: "error: Printer queue setup failed. Please restart CUPS and try again." Ugh!
4. I restarted CUPS and went into the hp-setup process again. It gave me the same printer queue setup failed error. I don't know if these entries in the CUPS error log are related or not, but these errors relating to foomatic showed up. I restarted CUPS again and this time used the non-hpijs file with hp-setup. This one was called "Description for the file: HP Deskjet f4400 Series, hpcups 3.12.6". It failed again with the same error and the same entries in the error log. I found lots of posts online about this error, but none seemed to have a solution that would work for me. Now I tried running hp-setup in debug mode with -g. Here is what it said before the error. I then tried to Google "debug: addPrinter() returned (0, Unable to connect to CUPS server)". I saw on an Arch bug report to install dbus-python and python2-gobject, as well as create a symlink for /usr/bin/python2 to /usr/bin/python. It didn't work - same error.
5. I then tried to add the printer to CUPS via its web interface. Now there were two listed, HP Deskjet F4400 series (HP Deskjet F4400 series) and HP Deskjet F4400 series USB [printer serial number here] HPLIP (HP Deskjet F4400 series). So, hplip added the second one. I tried both of them, but after clicking Continue the page started to hang. I got another stupid, undescriptive error. "Unable to get list of printer drivers: Success". I saw the same foomatic errors in the error log as before. I then started reading the ArchWiki page on CUPS, located here. I tried the blacklisting usblp. I tried changing the permissions on the device node, although this starts to become ridiculous that it is even required to do that. Nothing was working; the printer installation still didn't work with hp-setup or with CUPS. Then, I found what I was looking for: the exact error I had on the wiki page! It said for "Unable to get list of printer drivers" you should "Try to remove Foomatic drivers." WTF? Foomatic is required for hplip, and hplip is required for my printer. I can't do that. Forum posts say to try that or do the permissions or usblp thing. Nothing is working.
6. I tried various other things to get it to work, even though I knew they probably wouldn't make it any different. I copied the PPDs from hplip to another folder and uninstalled hplip and foomatic. I then added them to /usr/share/cups/model and CUPS successfully found them and set up the printer. I reinstalled hplip and foomatic since they're needed for those PPDs to function, and I tried printing a test page. It failed. I tried using the CUPS web interface to modify the printer driver; nope, that wasn't going to happen: "Unable to get list of printer drivers: Success".
That concludes the list of some of the things that I have tried so far. I really want to get this printer working, but right now I am really fed up with CUPS and hplip. It's things like this that make me hesitant to recommend Linux to anyone else. So much manual configuration and tinkering the inner workings of things is required to do tasks that would be quite simple on Windows. For example, I can plug this printer into my Windows 7 machine right now, wait for the driver to automatically be installed and configured, and have a test page in my hands less than a minute after I first plugged in the USB cable. I can share the printer with any other Windows machine on the network by checking a single checkbox.
But back to my problem with getting the printer to work on my DockStar. I just uninstalled all of CUPS, hplip, and foomatic again and removed all of their files. I can walk through things to try that you guys post and then give you full logs of everything - just give me exactly what to do and install and the exact order to do it all in. I just don't know what to do at this point and am so frustrated with this that I'm about to give up.
Does anyone have any suggestions on how to get this printer working? I know this was a very long post, but I just wanted to explain everything that I've tried and how nothing worked. I really hope that we can figure this out so that I'll be able to print, and maybe it'll solve a few other people's problems with their printers, too. Thanks for reading, and thanks in advance for the help.Had similar issue with my HP Deskjet F4500C All in one printer, here's what I did:
make sure these packages are installed or install them
pacman -S cups cups-pdf hplip pyqt3 python2-pyqt
pacman -S system-config-printer-gnome
rc.d cups start
To add device and install hp driver:
1. Run ‘hp-setup’ as root.
2. Click ‘Show Advanced Options’ button and check-enable ‘Manual Discovery’.
3. Enter IP address 192.168.59.63 in the ‘…device ID…’ entry and click ‘Next’ to install driver.
run system-config-printer as root, to add printer
# system-config-printer
click “Add”， Select Device -> Network Printer -> input the IP address of the printer such as “192.168.1.3″, click “Find” -> “Process”
you should be ok from here, if not some further steps:
If you encounter the following error:
File “/usr/share/system-config-printer/newprinter.py”, line 1531, in getNetworkPrinterMakeModel
debugprint (host + “: ” + args)
TypeError: cannot concatenate ‘str’ and ‘list’ objects
You should comment out the error line at 1531 of newprinter.py, and then continue to add the printer.
4). Finally, you can run hp-check to see what problems exists for the printer. -
Hi,
I generally enjoy using Grapher in OS X (I am using Mountain Lion v10.8.2). However, I have repeatedly encountered what seems to be broken basic functionality in setting the limits on the display frame (View> Frame Limits…). When opening saved Grapher files with multiple valid equations in them (equations which include constant terms defined as sets of numbers), I repeatedly get the following behavior:
1. Frame limits are not correctly saved. As in, the file opens with a different view than it was saved and closed in.
2. Frame limits no longer work as expected. For example, I might set the Y axis frame limits to be -2 to 2, but the Y axis of the frame display will run from about -1.95 to about -0.35.
3 Performance is degraded. Making a change to the frame limits (for ecxample, changing the Y frame limits to -2.2 and 5 in an attempt to display something approximating the range -2 to 2) take an inordinate amount of both processor time and clock time. The spinning ball appears and hangs out far longer than is welcome, and at times seems to hang requiring a force quit of Grapher.
These problems occur regardless of coordinate system.
Is there a solution? If I create a new file and start from scratch the problems reappear. The problems reappear across a wide range of 2D equation types.
Is Grapher simply broken in this regard?
Thanks for the input.Bonjour Lexy-Lou,
You are right, the bug was born with Grapher as you may read on the website
<http://y.barois.free.fr/grapher/> :
Grapher’s bugs and their remedies (OS X in French).
Bug nr. 1. (Grapher 1.1, 2.0, 2.1, 2.2, 2.3). When modifying the main 2D window size, the graph length and height already formatted (menu Format) are changed : axis scale values stay the same, added objects remain same size on the same places (unit pixel) relative to the graph left upper corner ; but the graph view changes for the ratio H/L do so : very annoying !
The remedy : To restore the 2D graph after changing the window size : menu Format > Layout > Size > redo the initial choice (paper size or L and H values)… or avoid having to do so by selecting a window large enough to begin with.
Proposed correction : making the graph size independent of the main window’s one.
Bug nr. 2. (Grapher 1.1, 2.0, 2.1, 2.2, 2.3). Saving is wrong in 2D (menu File > Save, Save as, Save a copy as). Are not seved : the last location on the screen of the main window, the graph size, the maximum and minimum values of the ordinate scale : very very annoying !
Note : The new windows of Grapher 1.1 (Grapher secondary window > New Graph > 2D or 3D Graph) always open in the same place on the screen( OS X 10.4.11 configured in French) depending on the language used by Grapher : if it’s English, well placed and covering most of the screen, if it is French, the windows are half length but same height and are located on the right side of the screen. This anomaly disappeared with Grapher 2.0, 2.1, 2.2 (English or French).
The remedy : to restore the 2D graph after opening a GCX files (.gcx) : menu Format > Layout > Size > redo the initial choice (Paper size or L and H values) to be done twice ; then menu View > Frame limits... > enter minimum and maximum vaues of the y scale. This requires to note four numerical values, L, H, y-min, y-max, for example at the top of the equation list (or at the bottom : see bug nr. 27).
Proposed correction : complete saving in 2D.
For the full list of Grapher's bugs please download "Instructions for Use - Grapher" (English) or "Mode d'emploi de Grapher" (French). Quick glance at the Contents (pages 2 & 3) you'll be surprised by the possibilities of Grapher.app despite the bugs.
Enjoy,
Au revoir,
YB24 -
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Boomba29 wrote:
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available from Apple - the new Pages 5 (Mavericks required) does not open AppleWorks documents. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.) Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings). LibreOffice will open simple Draw documents but I found it very unreliable with complex ones.
Spreadsheets can be opened directly only in the older versions of Numbers - the new version for Mavericks will not do this. The old version is no longer available from Apple. (Again, the older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Presentations can be opened directly only in the older versions Keynote; again, the new version for Mavericks will not do this. The old version is no longer available from Apple. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Nothing will open Database documents. You would need to export the data as ASCII and import it into another database program; you will lose your formatting and calculations will come over as the result, not the calculation.
This article examines 'abandoning Appleworks' in detail:
http://wilmut.uk/aw -
How to set Pages and Numbers to become default applications for attachment?
I installed Leopard and have just installed iWork.
I started noticing that the applications of .doc and .xls that come in file attachments in my mail do not use Pages and Numbers as their default application.
.doc uses TextEdit
I copied the file to the desktop, changed the default app to Pages, but it still doesn't work. All new mails with .doc still uses TextEdit as default app.
How to change this?parkview84capt wrote:
With the Lion update, microsoft office 2004 is no longer available to open my word and excel documents. I can open them with pages and numbers when I click "open with" but how do I set pages and numbers to be my default to open these documents. Thanks
Use the info pane. command-i
always open with, set default -
Setting ram limits on individual programs/processes
Is it possible to set ram limits on individual programs/processes?
Specifically, can you limit the about of ram gunzip uses whenever it is run?That helps some, but the true desired effect is to do something similar to virtualizing memory -- I want to be able to say "process x is allowed to work within 512mb of memory," for example.
Thanks for the pointer on setrlimit... It does kill the process if it hits the hard limit? The man page sounds almost like it does what I want, but I guess not.
Last edited by mrbug (2008-09-29 00:25:57) -
I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......
There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck -
HOW can I enter text using Japanese character sets?
The "Text, Plates, Insets" section of the LOOKOUT(6.01) Help files states:
"Click the » button to the right of the Text field to expand the field for multiple line entries. You can enter text using international character sets such as Chinese, Korean, and Japanese."
Can someone please explain HOW to do this? Note, I have NO problem inputting Hirigana, Katakana, and Kanji into MS WORD; the keyboard emulates the Japanese layout and characters (Romaji is default) and the IME works fine converting Romaji, and I can also select charcters directly from the IME Pad. I have tried several different fonts with success and am currently using MS UI Gothic.ttf as default. Again, everything is normal and working in a predictable manner within Word.
I cannot get these texts into Lookout. I can't cut/paste from HTML pages or from text editors, even though both display properly. Within Lookout with JP selected as language/keyboard, when trying to type directly into the text field, the IME CORRECTLY displays Hirigana until <enter> is pressed, at which point all text reverts to question marks (?? ???? ? ?????). If I use the IME Pad, it does pretty much the same. I managed to get the "Yen" symbol to display, though, if that's relevant. As I said, font selected (in text/plate font options) is MS UI Gothic with Japanese as the selected script. Oddly enough, at this point the "sample" window is showing me the exact Hirigana character I want displayed in Lookout, but it won't. I've also tried staying in English and copying unicode characters from the Windows Character Map. Same results (Yen sign works, Hirigana WON'T).
Help me!
JW_TechJW_Tech,
Have you changed the regional setting to Japanese?
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me
Attachments:
language.JPG 50 KB -
Download using open data set and close data set
can any body please send some sample pgm using open data set and close data set .the data should get downloaded in application server
very simple pgm neededHi Arun,
See the Sample code for BDC using OPEN DATASET.
report ZSDBDCP_PRICING no standard page heading
line-size 255.
include zbdcrecx1.
*--Internal Table To hold condition records data from flat file.
Data: begin of it_pricing occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
f4(18),
f5(16),
end of it_pricing.
*--Internal Table To hold condition records header .
data : begin of it_header occurs 0,
key(4),
f1(4),
f2(4),
f3(2),
end of it_header.
*--Internal Table To hold condition records details .
data : begin of it_details occurs 0,
key(4),
f4(18),
f5(16),
end of it_details.
data : v_sno(2),
v_rows type i,
v_fname(40).
start-of-selection.
refresh : it_pricing,it_header,it_details.
clear : it_pricing,it_header,it_details.
CALL FUNCTION 'UPLOAD'
EXPORTING
FILENAME = 'C:\WINDOWS\Desktop\pricing.txt'
FILETYPE = 'DAT'
TABLES
DATA_TAB = it_pricing
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7.
WRITE : / 'Condition Records ', P_FNAME, ' on ', SY-DATUM.
OPEN DATASET P_FNAME FOR INPUT IN TEXT MODE.
if sy-subrc ne 0.
write : / 'File could not be uploaded.. Check file name.'.
stop.
endif.
CLEAR : it_pricing[], it_pricing.
DO.
READ DATASET P_FNAME INTO V_STR.
IF SY-SUBRC NE 0.
EXIT.
ENDIF.
write v_str.
translate v_str using '#/'.
SPLIT V_STR AT ',' INTO it_pricing-key
it_pricing-F1 it_pricing-F2 it_pricing-F3
it_pricing-F4 it_pricing-F5 .
APPEND it_pricing.
CLEAR it_pricing.
ENDDO.
IF it_pricing[] IS INITIAL.
WRITE : / 'No data found to upload'.
STOP.
ENDIF.
loop at it_pricing.
At new key.
read table it_pricing index sy-tabix.
move-corresponding it_pricing to it_header.
append it_header.
clear it_header.
endat.
move-corresponding it_pricing to it_details.
append it_details.
clear it_details.
endloop.
perform open_group.
v_rows = sy-srows - 8.
loop at it_header.
perform bdc_dynpro using 'SAPMV13A' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RV13A-KSCHL'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RV13A-KSCHL'
it_header-f1.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_CURSOR'
'KONP-KBETR(01)'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'KOMG-VKORG'
it_header-f2.
perform bdc_field using 'KOMG-VTWEG'
it_header-f3.
**Table Control
v_sno = 0.
loop at it_details where key eq it_header-key.
v_sno = v_sno + 1.
clear v_fname.
CONCATENATE 'KOMG-MATNR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f4.
clear v_fname.
CONCATENATE 'KONP-KBETR(' V_SNO ')' INTO V_FNAME.
perform bdc_field using v_fname
it_details-f5.
if v_sno eq v_rows.
v_sno = 0.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=P+'.
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
endif.
endloop.
*--Save
perform bdc_dynpro using 'SAPMV13A' '1004'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_transaction using 'VK11'.
endloop.
perform close_group.
Hope this resolves your query.
Reward all the helpful answers.
Regards
Maybe you are looking for
-
How do i load the credit from an iTunes card to my account as i cant find a way of doing it
Hi guys I cant find a way to load credit from a itunes card onto my itunes account, there dosnt seem to be a button to get into load credit mode. thanks in advance. del
-
Im am very new to java and trying to learn java .. Now the problem i have is, I have to read input from console without using the BufferReader method.. Please tell me how to go about it.. I have a assignment to complete and im not able to figure out
-
Satellite C660 - Touchpad highlighting everything it goes over
I have a problem with my Satellite C660 with the Synaptics touchpad V7.2 sensitivity. The cursor keeps highlighting everything it goes over and dragging the files or programmes or opening them. It's driving me mad and restoring it to a previous date
-
Hi experts We are running SRM 5.0 - classic scenario How do you get the output information in a classic scenario?? The PO is created in backend and therefore the order must be printed or send from here, but how can the user see that his/hers order ha
-
What is Publication, Subscription, Site, Replication
Hello, What is Publication, Subscription, Site. what is diff between publication and subscription. ram