Using CVP on Cisco Prime Assurance 10.5
Hello guys,
I'm trying to add CVP 8.5 to be monitored by Cisco Prime Collab. Assurance 10.5, and after added the IP and SNMP RO, it shows that the SNMP credentials does not match.
Is everyone else getting this issue on this new version?
Thanks in advance
I have two instances of CVP -- one in Production and another in TEST. The Production one I have had working with CUOM via SNMP for a while. In testing Prime I was setting up the TEST environment and found I couldn't add the SNMP string to any devices as non were listed in OAMP, but I was able to copy the SNMPD file (it actually is SNMPD.conf but Windows assumes that it is of type "Speed Dial" and hides the extension -- even if you have show extensions turned on in Windows Explorer) from my working Production environment to TEST and it worked.
However, I now am stuck at failing the HTTP authentication -- is this the CVP OAMP user? Local Windows account?
Thanks,
Mark
Similar Messages
-
Hi all,
We would like to bring cisco prime assurance 9.1 in to our Organization
Guys could you please provide me install guide or screen shot of the application for the assurance version 9.1 and I wanted to know the prerequisite for this application like server requirement etc
We are having a UCS in which we can run a VM machine but I wanted to know is cisco prime is installed on windows server 2008 ent edition R2,R1?
Or it has any OVI template like CUCM or how do I install and integrate it?
Please help me to proceed in this case..
Rgds,
Rebecca
God bless u all!!Hi Rebecca,
Well....at least you're getting there
I believe you'd need glabaladmin for the UI as admin is for cli;
User Accounts
For Prime Collaboration, you will be required to specify various passwords at different instances. This section is designed to help you specify appropriate passwords in several scenarios that demand your login credentials (applicable for both converged application and standalone Prime Collaboration Assurance and Prime Collaboration Provisioning applications).
•globaladmin- A superuser who can access both Prime Collaboration Assurance and Prime Collaboration Provisioning UIs.
•globaladmin password- Specify this password when you configure your virtual appliance for either standalone or converged applications. See Configuring the Prime Collaboration Assurance Virtual Appliance and Configuring the Prime Collaboration Provisioning Virtual Appliance. You are also required to specify this password when you log in to the UI (see Password Rules for root User and globaladmin).
In Prime Collaboration Provisioning, this password is synched with the password of postgres admin (to perform backup and restore operations). The password is then updated in the database and in the /opt/cupm/sep/dfc.properties file. You must log in as a root user to access the dfc.properties file.
Note If you plan to install both Prime Collaboration Assurance and Prime Collaboration Provisioning, ensure that you specify the same password for both applications during installation.
•CLI Admin Username—The default username is admin. However, you can specify the username of your choice.
•CLI Admin Password—Specify a password for the SSH CLI admin. This password is used to log in to the CLI to check the application status and perform backup and restore (see Password Rules for CLI admin).
The CLI is supported only through SSH; Telnet is not supported. You can log in through SSH using port 26 for Assurance and port 22 for Provisioning.
•Root user—A superuser who has all privileges in Linux shell.
•Root password—Specify a password for the root user (see Password Rules for root User and globaladmin).
Password Rules for root User and globaladmin
•Must contain at least one of each: lowercase letter, uppercase letter, number, and special characters.
•No character in the password may be repeated more than three times consecutively.
•Cannot contain non-ASCII characters, %, +, and &.
•Cannot be cisco or ocsic or any variant obtained by changing the capitalization of letters therein, or by substituting 1,!, or | for i, substituting 0 for o, or substituting $ for s.
•Cannot be same as the username, and cannot be the username reversed.
•Must contain from 8 to 80 characters.
•Cannot end with these characters: *, ; or #.
Caution We recommend that you write down the root password, as it cannot be retrieved.
Note•To change the root password, you must log in as root user and execute the "passwd" command, which prompts you for a new password.
•If you are planning to integrate Provisioning and Assurance servers, make sure that you adhere to the Assurance-specific globaladmin password rules while setting up / creating the password for globaladmin in Provisioning.
Password Rules for CLI admin
•Must contain atleast six characters.
•Must contain at least one of each: lowercase letter, uppercase letter, and number.
•Must not be the same as the username itself.
Installation Prompts
We recommend that you find out the values beforehand for the following parameters, as you will be required to enter them at the console prompts when you configure the virtual appliance:
•IP address—The IP address of the virtual appliance. If you wish to change the IP address, see
•IP default netmask—The default subnet mask for the IP address
•IP default gateway—The IP address of the default gateway
•Default DNS domain—The default domain name
•Primary nameserver—The primary name server. You may add a name server. To configure several name servers, enter y.
•Primary NTP server[time.nist.gov]—The primary NTP server. To enter a secondary NTP server, enter y at the next prompt.
Note Prime Collaboration 9.5 supports three NTP servers. To configure a tertiary NTP server, enter y at the next prompt, after you specify a secondary NTP server.
•Timezone—The timestamp that is displayed on the UI is the server time. By default, the configured timezone is UTC. For a list of supported timezones, see Supported Timezones for Prime Collaboration. You must use the same timezone for Prime Collaboration Assurance and Prime Collaboration Provisioning servers in converged mode.
•Username—The CLI admin username. The default is admin. However, you can specify the username of your choice.
•Password—The CLI admin password. This password is used to log in to the CLI to check the application status and perform backup and restore.
•Root user—A superuser who has all privileges in Linux shell.
•Root password—Specify a password for the root user.
•globaladmin—A superuser of the application who has all privileges, and whose account used for initial login to the application (UI).
•globaladmin password—Specify a password for the globaladmin.
•Network deployment mode-Select the network deployment mode you need. Specify E for Enterprise Deployment or M for Managed Service Provider Deployment (E/M).
http://www.cisco.com/en/US/docs/net_mgmt/prime/collaboration/9.5/quick/start/guide/Cisco_Prime_Collaboration_Quick_Start_Guide_9_5.html#wp109430
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen -
New install with a Cisco Prime Assurance 9.0. I am able to log into the CLI with SSH but the web page using https://IPADDRESS does not give me access - message "This page cannot be displayed". I've restarted the VM and services are running. I installed the provisioning server without issue.
NO, Cisco Prime Assurance Manager is upgraded and replaced by Cisco Prime Infrastructure. Refer the notice :
http://www.cisco.com/c/en/us/products/cloud-systems-management/prime-assurance-manager/index.html -
Is Cisco Prime Assurance Manager included in Prime Infrastructure ...I know it is going EOS.
NO, Cisco Prime Assurance Manager is upgraded and replaced by Cisco Prime Infrastructure. Refer the notice :
http://www.cisco.com/c/en/us/products/cloud-systems-management/prime-assurance-manager/index.html -
Using ACS for Cisco Prime authentication
I'd like to use our Tacacs server running ACS to be the authentication method for user accounts in Prime, but don't even know where to start with this..
Any pointers?The configuration on the Prime Infrastructure side is minimal: define the authentication server Prime is to use and select a mode for Prime Infrastructure to use with it.
Administration > AAA > TACACS+ Servers > add tacacs server.
Administration > AAA > AAA Mode Settings > tacacs+ and enable fallback to local.
The bulk of the configuration is on the authentication server side, particularly indefining groups, services and authorization tasks. This is covered in the "Performing Administrative Tasks" chapter of the Prime Infrastructure Configuration Guide, starting with the topic "Configuring ACS 5.x"
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/admin.html#wp1595935
"Configuring ACS 4.x"
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/configuration/guide/admin.html#wp1625896
https://supportforums.cisco.com/docs/DOC-17909
In case it doesn't work, please get the logs from the ACS reports and monirtoring for tacacs authentication and error message while accessing cisco prime.
Jatin Katyal
- Do rate helpful posts - -
Hi all,
I was able to install the Cisco Prime 9.0 assurance
I am entering the correct username and password still I am not able to login to Web admin page
How do i reset the password and login to the web admin console??
Plz help... urgent...
Rgds,
Rebecca....Thanks Rob so much
yes i booted the NCS from the DVD and installed the applications
now i have two NCS appliances one is running PI 1.2 and other LMS 4.2 -
Can we Monitor third party Windows servers through Cisco Prime
Hi Team,
We are using Cisco Prime assurance and are currently monitoring Cisco UCCE Components through it.
Meanwhile we have few third party windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
If yes, please share the steps or link.Also highlight the limitations in that.
Regards,
krishnaSeems Cisco Prime Assurance Manager is now obsolete and end of life already.
It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
Cisco Prime LMS 4.1 - Do access points use up a node count license?
Hi Everyone,
I wish to purchase Cisco Prime LMS 4.1, particularly Cisco part # R-LMS-4.1-500-K9 which support 500 Cisco nodes.
We have about 360 Cisco switches/routers/ASA/FWs/WLCs so the 500 nodes license would seem to suffice for now & for future growth.
We also have about 200 lightweight APs that are managed & monitored by our WLC/WCS/Navigator environment.
According to the device support documentation for LMS, it supports and I assume will auto-discover these APs.
Does that mean these APs will use up node licenses on LMS even though management of the APs is done by WLC/WCS? If so is there an easy way to suppress discovery of APs by LMS so we don’t have to purchase extra node licenses for LMS? Or, does LMS offer additional support features for wireless APs not already offered by WLC/WCS/Navigator?
Just trying to understand how many network node licenses for LMS I have to purchase.
Thanks in advance for your help,
Ian.Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian. -
Cisco Prime Collaboration Assurance Standard
Hi All,
We have recently deployed Cisco Prime Collaboration Assurance Standard Server. The issue that I am facing is that after some time the server collapses and logs me out, even though I can connect via the cli.
The version of prime we are using is : 10.5.1.53684.
I am attaching some logs that I got from the cli mostly related to apache.
Has someone faced this issue?
Thanks
HassanHi Aman,
Thank you I will have a look at the bug. I was following the troubleshooting document and as compared to that document the service running when I do a sh application status cpcm are a lot less.
http://docwiki.cisco.com/wiki/Troubleshooting_Cisco_Prime_Collaboration#How_to_verify_the_Cisco_Prime_Collaboration_Assurance_installation_.28for_advanced_and_standard_modes.29.3F
STAT PID USER COMMAND ELAPSED
===============================================
SNl 1119 root emsam_perfmonen 12:50
S<l 1288 root emsam_tomcat 12:39
SNl 1400 root emsam_poller 12:16
SNl 1625 root emsam_fault 11:56
S<l 32045 root Decap_main 14:41
SN 32164 postgres postgres 14:40
SN 32274 primea postmaster 14:29
SNl 32317 root emsam_mq 14:12
SNl 32380 root cpc_multiproclo 14:04
SNl 32414 root emsam_inventory 14:04
Regards
Hassan -
Cisco Prime Collaboration Assurance _ Web login
I have recently deployed Cisco Prime Collaboration Assurance standard within our Vmware environment with the view to evaluate and deploy into production.
I have successfully deployed within the environment and can log into the appliance via SSH via the root, admin and globaladmin account however when I try to login through the Web Gui with the above accounts, i am getting the " invalid username or password" error.
Can anyone provide guidance please
PeterHi Peter,
Never faced such issue.
Look into the bugs if helps.
PC 9.0 After restore from backup, cannot login - invalid password
CSCui00260
Description
Symptom:
cannot log in to the GUI with any known username/pw including globaladmin account.
tomcat logs will show 'untrusted certificate' errors.
Conditions:
seen after a fresh restore from backup on a new server.
Workaround:
contact BU for workaround.
Assurance password for globaladmin with * at end or beginning fails
CSCue81630
Description
Symptom:
User 'globaladmin' is unable to login to Prime Collaboration Assurance
Conditions:
The password for 'globaladmin' contains '*' at the beginning or end of the password
Workaround:
Do not use '*' character at the beginning or end of the password
regds,
aman -
Cisco Prime Collaboration Assurance IPPhone 3901 no serial number report
Hi All,
I have installed Cisco Prime Collaboration Assurance in my office and try to create phone inventory report , so far no problem , but when i add IPPhone 3901 there no serial number in the report , I have enable web access on the phone , i can see the serial number by click the IP .
any help ?
Best Regards,
Tommy -
Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure?
Is it possible to manage the switch SMB 300 series using Cisco Prime Infrastructure 1.2?
SF300 series is targeted for support in PI 2.0.
-
Gente,
Alguno pudo instalar en el mismo Appicance los módulos de Prime Infrastructure 1.2 Compliance y Assurance??? Hay una guia de instalacion?
Gracias,
Marcelo.Spanish
Aquí hay un enlace a la Guía de Instalación Primer Gerente de Aseguramiento
http://www.cisco.com/en/US/products/ps12349/tsd_products_support_install_and_upgrade.html
Google es todo lo que tienes que hacer ...
English
Here's a link to Prime Assurance Manager Installation Guide
http://www.cisco.com/en/US/products/ps12349/tsd_products_support_install_and_upgrade.html
Google it is all you've gotta do... -
Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements
Hi guys,
I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
Two questions
01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
02) There is a option to install the Standard Version using less HD space ?
Thanks
My Best Regards
Andre Gustavo LomonacoInitially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around... -
Is Cisco Prime required to use Cisco MSE?
I recently purchased a Cisco MSE 3355 with locator licenses. I have 2- Cisco ISE's and 2 - WLC 5508s.
Is it required to use Cisco Prime in order to see the location services that the MSE is providing?
If so, what type of license do I need?Prime Infrastructure is required and you need to purchase enough lifecycle license to have a license for every AP you have. Details of the license options are below:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/guide-c07-731621.html
Maybe you are looking for
-
Satellite Pro U300 - DVD no longer appears in My Computer in XP Pro
My laptop CD/DVD writer was working fine. Recently it has disappeared from My Computer, audio CDs won't play, etc. The DVD drive spins-up OK when a disc is inserted so the drive isn't completely dead. Please help it's driving me nuts. Shmoo
-
Scanned Data duplicating in Adobe Acrobat Standard 7
I am scanning a multiple page document, that includes letter size sheets and A4 size sheets. When I set the A4 size in my twain driver screen, inside acrobat, any pages that are letter size in the batch, come up with the last quarter-inch or so dupli
-
JCoIDoc.Server doesn't stop listening even after removing the application
Hi, I developed a java application with a JCoIDoc.Server to listen for IDocs from the R/3 system. I made it available in the WAS 2004s server. The application is working fine, i.e its catching the IDocs coming from R/3. The problem is, it doesnt stop
-
IOS 6, Netgear access point and Internet
Hi, I’ve reached a point where I’m not entirely sure what to do next. Here are some quick details (all are on most recent firmware unless stated): Router: Draytek Vigor2830n Access Point: Netgear WG102 Devices: iPhone 4, iPhone 5, iPad 2 and two iPad
-
Init-Routine in Shared Library not executed
I have tried to write a Shared Library with an init- and fini-routine. I have used the #pragma init resp. #pragma fini statements to specify the names of the functions to be executed. But when loading my library nothing happens. The init function is