Using DAC for custom Environment

Hi All,
I would like to know that, can we use DAC to schedule , run the loads for custom ETL environment(not BI APPS), does DACt supports. Below is is my set up
-Oracle 11g DB(source and target )
-Informatica 9 installed
-Mappings, workflows are developed
-DAC 11g is installed
Now I want to set up DAC so that I can run loads from DAC instead of Informatica. Please any let me know high level steps. Is it different from BI APPS environmen if so kindly let me know configuration
Thanks in advance

Short answer is NO...as per licensing agreements, you can only use DAC and OBIA to load a OBIA DW target.
pls mark correct

Similar Messages

Using DAC for running Non BIApps infa jobs n running 2 EP in parallel

Hi,
We have already setup BI Apps prod environment using DAC, Informatica and OBIEE 11g for one of our customer.
Now, we want to check possibility of using DAC for running Non BIApps related informatica jobs.
(As we have only weekly run of DAC execution plan on weekends and Informatica and DAC are idle most of the time during weekdays)
Customer wants a separate new small datamart to be setup which will cater reporting requirements for different department and has no relation or any link with existing BI Apps datawarehouse.
Just wanted to check if it will violate licensing terms (if we use DAC for Non BI Apps workflows and run another EP)?
Also, is DAC Build 10.1.3.4.1 capable of running two execution plans in parallel?
We heard long back that running two EP parallel feature will be lunched in DAC 11g version. Any pointers or new in this space?
Thanks in Advance,

From what I recall, you CANNOT load a "separate" DB instance that is NOT OBIA. If you create a small custom datamart INSIDE the exitsing OBIA schema, then it is acceptable. However, if you are using DAC (regardless of if its one plan or two plans) to load a NON-OBIA target, this may violate the licensing agreement. You may need a separate standalone license for Informatica and use Informatica's scheduler tool. If you want to use DAC, make sure your target is inside the OBIA DW.
Pls mark correct...

Using nullLayout for custom component

I am writing an AccordianPanel as a custom component that can be dropped into a JPanel and behave as expected. I am using a null layout in the outer container (JPanel) as the accordian dividers need to move as told and not be managed by a layout manager. When I resize a window or another container that the custom component sits in, it doesn't resize anything - I understand this is the behavior I would expect as that is how I coded it.
Now, I want to have the custom component resize its internal stuff when the container it resides in (i.e. JFrame or most likely another JPanel) gets moved, but I don't know how to do this. The outer most component in my custom components hierarchy is a JPanel whose layout is set to null and I stuff everything else inside there.
I believe I need to add a componentListener to my JPanel whose layout is set to null, but I am not sure. Could someone send me in the right direction.
thanks

the best approach might be to implement your own LayoutManager (which is simple enough) and use it rather than absolute positioning....
If you read postings in the forum you will find most people recommend using LayoutManagers and not a null layout so you don't have problems like this.Hello sarcommand , camickr, and anyone interested,
I've tried to bring this discussion up again just a few days ago, and was disappointed I got no feedback - must be a dull read :o(
Here is the [link to the thread|http://forums.sun.com/thread.jspa?messageID=10723670&#10723670], would you mind having an eye on it?
I'm sorry to hijack this thread (seems slightly less rude than bumping my own former thread up), but I've read several discussions on this subject too, and still I can't decide whether I should follow the CustomLayoutmanager track.
Although most of the writing there is specific to my current problem, it highlights 3 points I think are general enough:
- A custom layout (whatever the way it is implemented, I discuss 4 approaches in the thread) is generally used to display custom components, or at least, components that represent custom application-specific entities or input points. -> Is is worth the trouble to abstract the positioning logic when this "custom layout" has only one, at best two, use cases (a couple of specific screens in your specific app that represents your specific entities)?
- A custom (app-specific) layout manager is likely to require more knowledge about the things being layed out than the default min/max/pref sizes. In particular it may require to know data of the underlying model objects represented by the children components. How is that best designed? I tentatively think it's by way of custom Constraint classes which have to be abstract enough yet should be easily mapped from the app-specific data.
- The CustomLayoutManager integrates natively with regular graphical events (hiding, resizing,...), but how to integrate app-specific events (such as, when the underlying data change in such a way that should be reflected by a change in the layout, how/when to force the re-layout)?
Thank you for your help.

Using RFBIDE00 for customer master upload

Hi all,
   Does any one used batch input program RFBIDE00 for Customer master Upload data in to SAP.
   Could you please explain how to use it... its urgent, appreciare if your early reply..
   I am planing to use it through Run the program from SE38..
Thanks..

hi good sap1,
Batch Input - Customer Master Data (RFBIDE00)
Description
All new fields for customer master records can be transferred to the R/3 System also with the report RFBIDE00.
Furthermore, the batch input can be carried out with the existing record definitions. By means of the end of record marker, the report recognizes which record structures do not yet correspond to the extended record layout and initializes the new fields with NODATA.
It is pointed out in the batch log, which structures are yet to be maintained. This should be done as soon as possible to be able to use the new functions or fields
Introduction
It is now possible to pass the information concerning tax categories and withholding types (for the extended withholding functionality) and the special Argentine fields via the standard batch-input program. Please look at the standard documentation if you need further information on the program.
Additional Fields
The additional fields have been added to the structures BKNA1 (general information) and BKNB1 (company code data). Please use transaction SE12 to see the fields of the structures.
Enrichments for Tax Categories
The following table shows how to fill the interface table BKNAT to pass the tax category data:
Field
Description
Value
Input
STYPE
Record type
2
obligatory
TBNAM
Table name
KNAT
obligatory
XDELE
Flag: Delete entry
   optional
TAXGR
Tax category
   obligatory
Enrichments for Extended Withholding Data
The following description shows how to fill the interface table BKNBW to pass the tax category data:
Field
Description
Value
Input
STYPE
Record type
2
obligatory
TBNAM
Table name
KNBW
obligatory
XDELE
Flag: Delete entry
   optional
WITHT
Withholding type
   obligatory
thanks
karthik
reward me points if usefull

Using servlets for custom protocol???

Is it possible to use servlets for my own custom protocol??
Can somebody PLEASE say yes or no!!!!
I've been struggling with this for hours!
Is there an easier way?

Yes, I searched through the API docs, doesn't tell me anything. I need proven examples.
There's nothing out there .... strange!!!Actually, not so strange.
I think the original design of the servlet API permitted protocols other that HTTP, but in practice it was found that it didn't work as well. I think I've heard of an FTPServlet subclass, but that's it.

Using DAC for implementation of two change capture views on same base table

Hello
We have a need to create 2 views (V_INS_CLAIM & V1_INS_CLAIM) on a single table (S_INS_CLAIM) using DAC & Image tables.
The V_INS_CLAIM will be used to load ODS on a hourly basis and
The V1_INS_CLAIM will be used to load DataMart on a daily basis.
For this purpose, we propose using the following approach:
1) Create 2 separate containers - one for ODS and one for Datamart.
2) Use a separate image table suffix (for the same table) on each container e.g.
- Use image suffix 51 on S_INS_CLAIM for the ODS container (will result in image tables having suffix 51)
- Use image suffix 61 on S_INS_CLAIM for the Datamart container (will result in image tables having suffix 61)
3) In the ODS container, the change capture process would create a view V_INS_CLAIM using
the base table S_INS_CLAIM and the I/R/D tables using image suffix 51
For this folder the 'Drop and Create Change Capture Views Always' flag will be set to True
All views for this container will be created with the prefix "V_"
4) For the Datamart container, we propose to set the flag 'Drop and Create Change Capture Views Always' to False.
This would ensure that DAC never drops/creates the view (assuming that the view was already created by the ODS container)
For creating the change capture views, we propose to create the views using sql procedures.
All views for this container will be created with the prefix "V1_"
The above procedure would ensure that we have distinct views created for each target (ODS & Datamart), which are refreshed at different intervals.
Alternatively, instead of creating 2 views with different names in the SIEBEL schema,
we could create 2 schemas - one for ODS and the other for Datamart and create the change capture
views separately in each schema (using separate I/R/D image tables - as mentioned above).
Please let me know which of the above 2 approaches would work and supported by DAC and which would be the better option ?
Thanks

1.) Wrong forum. Go here: Business Intelligence Applications
2.) Soft delete or hard delete? Sound to me like you want to get rid of teh records. I.e. deleting history.
3.) Normal upsert mapping swon't do, you'll need delete mappings (depending on #2)

Can I use BAPI_ACC_DOCUMENT_POST for customer clearing(inter company)?

Hi,
We were getting errors for object type. Object type is a mandatory field and it is not taking "BKPFF", "VBRK" and other object key as a valid object key( Check is present in SAP Include LACC9F20 for object type). We have created a new object type in TTYP table and passed in this BAPI "BAPI_ACC_DOCUMENT_POST " . Is this is a correct approach?
After this correction when we try to post clearing document using BAPI, getting error :- "FI interface: Small difference * USD 30 cannot be distributed".
We are passing parameters :-
Document Header :-
OBJ_TYPE ( Passing manually created entry of TTYP)
BUS_ACT( RFBU)
DOC_TYPE(YD)
Other entries which I am passing are OBJ_KEY, OBJ_SYS, USERNAME, COMP_CODE, DOC_DATE, POSTNG_DATE, FISC_YEAR, PERIOD.
ACCOUNTGL:-
Item No:-1
GL Account
ITEM_TEXT
AC_DOC_NO(AR Invoice of payment document which I want to clear) for e.g. 7100000001
Customer
Item No:-2
GL Account
ITEM_TEXT
AC_DOC_NO(AR Invoice of payment document which I want to clear) for e.g. 7100000002
Customer
ACCOUNTRECEIVABLE:-
Item No.:-3
Customer( same which i have passed in GL account parameter)
comp_code:- Header company code
CURRENCYAMMOUNT:-
item No:-1
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (amount of AR invoice of account GL item no 1).
item No:-2
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (amount of AR invoice of account GL item no 2)
item No:-3
CURR_TYPE: 10 (company code curr)
Currency (from document)
AMT_DOCCUR (Sum of above two AR invoice which will be against customer)
Do you have any solution for this error? kindly suggest.

Check if account for payment differents defined ?
IMG: Financial Accounting -> Accounts Receivable and Accounts Payable -> Business Transactions -> Incoming Payments Global Settings -> Overpayment/Underpayment -> Define Reason Codes / Define Accounts for Payment Differences.

Query: Predictive Use Cases for Customer Acquisition during Launch Phase

Dear all,
May I ask you to help me with some Predictive Use Cases (essentially SAP InfiniteInsight) for a Telco Customer who is going to launch new 4G services.
Some important points to note are:
1) Being a new product launch, there is no historical data about customers.
2) Predictive use cases should help the customer acquire more customers (higher acquisition rates)
This means that the traditional churn, next best activity, product recommendations scenarios would not be a great fit because they would essentially be coming in the grow phase.
Additional info: The customers has other businesses in retails, mining, refinery.
Rg,
Ankit

Since you do have the CC currently so you should have CS6 included as part of his membership. The download previous version section discussed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html provides guidance on how to install through the Creative Cloud Desktop application.
If you don’t have high speed Internet access available on the computer you can install on then you can download the installation files from http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html and use the steps in http://helpx.adobe.com/creative-cloud/kb/convert-cs6-licensed-under-ccm.html to license the software.
You will need to be online to submit the periodic activation requests but it sounds like Internet access is available on the computer you are installing.
Regards
Rajshree

Using SPAU for custom development

Hi Guys,
take the following szenario:
We have Development system A and a copy of this system Development system B. Where B is the project system. In the time the systems A and B will be enhanced using different development. At one point in time the developments from system B should be merged with system A. Could this merge be done using some similar functionality like the SPAU after SAP-Upgrade to ensure the developments with origin in A and developments with origin in B are compared and amended in the right way ?
Thanks for any idea in managing this.
Best regards,
André

ok a small excourse on SPAU.
When transporting a transport request into the system (same for hot-packages or release-change), a new version is beeing put into the version managment of the referred object.
SPAU compares the active versions with the ones which got transported.
Problem at this edge is that SPAU just scans for modifications.
Modifications are changes to SAP-Standard objects. SPAU just checks for differences in SAP object.
Objects in customer name room, x or y will be ignored.
Thats why i dont think you can use SPAU.
BUT well you could copy the SPAU, and then reprogramm it a way it will not ignore x and y objects.
When SPAU is done and all is fine, THEN you transport the things to test and productive Server.
Edited by: Florian Kemmer on May 20, 2008 3:20 PM

Authorization Problem (I am Using Authorization For Custom Forms)

Hi All,
I am Using Authorizations To My Forms (I created One Addon For This Addon I am Using Authorization).I created Authorization For My Addon But While Working It Showing Some Errors
. In My Addon Four Forms are there For this four forms I am Using Authorization based on usres some screens only super user can access. normal user he is not a super user he cliekd on that authorization form it shows one message Your not a authorized user to permitted this operation in this message box we have two butons one is ok button and one is Authorized by another user . When i clicked on Ok Button I am getting error Internal error (-10) occured [131-183]. Please give me Your Valable Suggestion.
I am waiting for your Reply.
Thanks & Regards
Naresh

I am using Sap Authorizations For My Custom Form See The Code Also U Can Get Clear Idea
Private Sub CustomAuthorization()
        Dim li_RetVal As Integer
        Dim pUserPer As SAPbobsCOM.UserPermissionTree
        Try
            pUserPer = Me.SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserPermissionTree)
            'Purchase Indent
            If pUserPer.GetByKey("NHCL_PM") = False Then
                pUserPer.PermissionID = "NHCL_PM"
                pUserPer.Name = "Purchase Module"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->New Purchase Indent
            If pUserPer.GetByKey("NHCL_PM_NPI") = False Then
                pUserPer.PermissionID = "NHCL_PM_NPI"
                pUserPer.Name = "New Purchase Indent"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010002"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent->View For Approval
            If pUserPer.GetByKey("NHCL_PM_VIE") = False Then
                pUserPer.PermissionID = "NHCL_PM_VIE"
                pUserPer.Name = "View For Approval"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010003"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Selection For RFQ
            If pUserPer.GetByKey("NHCL_PM_SEC") = False Then
                pUserPer.PermissionID = "NHCL_PM_SEC"
                pUserPer.Name = "Selection For RFQ"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010006"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Purchase Quotation
            If pUserPer.GetByKey("NHCL_PM_PUR") = False Then
                pUserPer.PermissionID = "NHCL_PM_PUR"
                pUserPer.Name = "Purchase Quotation"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010007"
                li_RetVal = pUserPer.Add()
            End If
            'Purchase Indent ->Final Quotation
            If pUserPer.GetByKey("NHCL_PM_FIN") = False Then
                pUserPer.PermissionID = "NHCL_PM_FIN"
                pUserPer.Name = "Final Quotation"
                pUserPer.Options = SAPbobsCOM.BoUPTOptions.bou_FullNone
                pUserPer.ParentID = "NHCL_PM"
                pUserPer.UserPermissionForms.FormType = "2000010008"
                li_RetVal = pUserPer.Add()
            End If
        Catch ex As Exception
            Dim ErrCode As Long
            Dim ErrMsg As String
            Me.SBO_Company.GetLastError(ErrCode, ErrMsg)
            Me.SBO_Application.StatusBar.SetText("Authorization Problem" & ErrCode & li_RetVal, SAPbouiCOM.BoMessageTime.bmt_Short)
        End Try
    End Sub

Restructuring Cost-Center environment: Where used CC in customizing entries

Hi
My company needs to restructure CC environment, by replacing all many existing Cost-Center with new ones.
I need to evalaute the impact of this change, and I need to understand where a Cost-Center is used both in OBJECTS (Assets, Tarifs, CO-Routings, Order settle rules etc.) and CUSTOMIZING.
For Objects I can run where-used tool from KS02 transaction, but I don't know is there a Where-Used tool for Customizing entry too.
Does Anybody knows if there is this tool in SAP ???
Thank for your reply.
Claudio

Hi,
There is no comprehensive tool for this task. You have to check the customizing either via activities or directly in the tables if you are familiar with them.
Regards,
Eli

How to use Cache Management Library (CML) for custom applications?

Hello,
We are planning the migration of multiple applications (J2EE, Portal, Web-Dynpro for Java) from 7.01 to 7.3 and we would like to replace some custom cache implementations with a central cache management provided by the SAP Web-AS Java.
Several SAP standard services (e.g. UME, Configuration Manager, Scheduler) seems to use the "Cache Management Library" (CML):
[http://help.sap.com/saphelp_nw73/helpdata/en/4a/f833eb306628d2e10000000a42189b/frameset.htm]
Such caches can be monitored using SAP Management Console (AS Java Caches).
Portal Runtime (cache_type=CML) and Web Page Composer can also be configured to use CML:
[http://help.sap.com/saphelp_nw73/helpdata/en/49/d822a779cf0e80e10000000a42189b/frameset.htm]
[http://help.sap.com/saphelp_nw70ehp2ru/helpdata/en/13/76db395a3140fcb17b8d24f5966766/frameset.htm]
So our questions:
How to use CML for custom applications?
Is there any example or documentation available?
Kind Regards,
Dirk

Thanks Vidyut! You've answered my question.
I placed the jar file in the $CATALINA_HOME/shared/lib directory. But where should I place the taglib TLD file? And how should I reference it in web.xml?
Currently, my web.xml is as follows and it doesn't work.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<taglib>
<taglib-uri>http://abc.com</taglib-uri>
<taglib-location>c:\Tomcat\shared\lib\mytags-taglib.tld</taglib-location>
</taglib>
</web-app>
Thanks again!
Joe

Do not use tpc 2106T for custom animation Purpose

I was trying to use TPC2106T for developing a MMI for an application.To my surprise the Labview in built functions for creating custom animations (eg ring control) does not work for TPC2106T .I had been told this is to do with Windows CE OS (which is installed in TPC)
So please be careful if you want to use TPC2106T for custom made animation as you might suffer like me.I am using labview 8
Request information if some body tried the same exercise.

David_Powers wrote:
John Waller wrote:
I thought PM-ing was one of the "benefits" of web forums?
In theory, it can be.
Currently, no one has moderation rights, but they are in the pipeline. A moderator will be able to send a private message to an individual explaining why a post or a thread has been deleted, or warning of impending action if that person's behaviour is felt to be disruptive.
Anyone feeling Waller is a wally or a jolly good fellow will be able to share that information privately.
Also, someone wishing to commission private (paid) help can do so via a private message. It's up to the individual approached to decide whether to accept such a commission. But I think most of the volunteers who provide help here wish to do so in an open and free manner.
Well, I don't mind helping people here, obviously, but I don't turn down work, either! 8)
And I certainly feel that Waller is a wall-er. Does that count?

Cloning For Custom Mappings In DAC

Hi All
Can anyone plz help me about cloning a task in DAC for customized mapping........
With Regards
Ven

hi
Thanks for the input Remco .....thought of sharing what I have come to know.... Cloning a task is mainly done if there are some customizations done to the existing BI Apps mappings and for this......what you do is create a new copy of the container (R12 complete) and just identify the tasks and overwrite the command for initial and incremental load names and save them....by doing so when you run a dac load it runs the customized version of the mappings rather than the preseeded one........Hope this helps....
With Regards
Ven

Using F110 for AFT payments

Hello,
We currently use F110 APP to set up our AFT payments from customers. When a payment proposal is executed, the program indicates the customer invoices have been dunned by adding a Dunning block on the AR line item.
I've run into an issue where we have some manual AR line items set up on the customer account that are to be included in the payment run. As these line items are set up during a manual process using F-30, they can result in two or three line items on the customer account that share the same accounting document number. The program is only adding the dunning block onto the first occurance of the document number, and leaving the other blank.
Has anyone used F110 for customer accounts and dealt with this issue? The dunning block appearing per line item in BSEG is important for our process of clearing the items from the customer account.
Regards,
Morgan

Hello Jurgen,
I have an exactly similar question. Did you find an answer. If yes, would you let me know at : [email protected]

Using DAC for custom Environment

Similar Messages

Maybe you are looking for