Using Dash board in Dot net Page

Hi,
I am using OBI dashboard. I have made my dash board looks fine.
But what i want to do is I want to integrate this dash board in dot net page.
I just want to show my dashboard in a dot net web page any code sample and any link
will be helpful.
I found a pdf at
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31769.pdf
It is a long pdf and i have little knowledge about dot net.
i just want to show my dash board on my web site.
Thanks
Umesh

Use urls like:
http://server/analytics/saw.dll?Dashboard&PortalPath=/shared/ABC/_Portal/ABCSummary&Page=PageName&NQuser=username&NQpassword=password&Action=Navigate&P0=2&P1=eq&P2=Time.Year&P3=1+2007&P4=eq&P5=Time.Month&P6=1+4

Similar Messages

MSSQl jdbc Driver1.2 connection error in Dash Board...

Hi,
I installed OIM 9.1.0.1 with following pre-requisites, but when i using Dash Board getting error stating jdbc driver load fails.
1) Windows 2003 sp2
2) MSSQL server 2005 sp2
3) Weblogic server 10.3
4) OIM 9.1.0.1
(After installing the OIM i am unable to start the Weblogic server, so i removed realm entry from config.xml file then i can able to use the admin console of the Weblogic Server.But i am unable to log-in to the OIm admin console by using uid xelsysadm and password which i given at the time of OIM installation)
by using above components to install the OIM 9.1.0.1 i followed the PDF from http://download.oracle.com/docs/cd/E14049_01/doc.9101/e14047/toc.htm and i downloaded the sqljdbc_1.2.2828.100_enu.exe from the site with approx size is 2.96 mb.
So please to get me out from the JDBC Driver load error saying com.miicrosoft.jdbc.sqlserver.SqlServerDriver.
Thanks and Regrads,
Santosh Akula

It sounds like you are trying to use the think (OCI) driver. Is this correct?
The OCI client installed on your machine must match the JDBC drivers you are using to connect; if you are using the default JDBC drivers shipped with JDev, you may be seeing this incompatability.
Try using the classes12.jar from your Oracle Home instead (if you are running from JDev, you can just create a new library to point to the Oracle Home JDBC driver and use that in your project instead).
- John McGinnis
JDev Team

Printing problem using Dot Net - fields are drifting off specified co-ords

Hello
I am writing a crystal report that requires exact positioning of data to fit preprinted stationery.
I have achieved this satisfactorily in design mode (CR XI) and the report prints according to requirements from design mode.
I have loaded the report into our Dot Net app and printed the same report from there and the x,y cordinates of the output is slipping more and more both across and down the page.
e.g the differences vary on the x co-ord from 5mm to 13mm working left to right and 1mm to 10 mm vertically from top to bottom.
This error is evident in both preview and printing via Dot Net but is perfect in design mode.
I am using CR12 merge modules from the dot Net app.
I have tried locking fields and size and unlocking them - it makes no difference.
I hope there is a simple solution for this as I have been tearing my hair our trying to solve this problem.
Thanks in anticipation.
Richard

Using Crystal 2008, I can explain the fundemental problem that I have with the drifting of the output, even from design mode.
1) Create a brand new report.
2) In page setup, zeroise all margins.
3) On the design tab place a text box on the report with contents "XXXX" in it.
4) Format Field options - add top and left margin line
5) Duplicate the field
6) First field - right click and choose "size and position" and set to X : 15 (cm) Y : 25 (cm)
7) Second field - right click and choose "size and position" and set to X : 2 (cm) Y : 2 (cm)
8) Print the report
The boxes on the report actually print at :-
Box 1 : X 2.35 (cm), Y : 2.5 (cm)
Box 2 : X 14.7 (cm), Y : 24.4 (cm)
Now, this problem only seems to have started happening since moving up to 2008 merge modules for our Dot Net app, but this issue appears to originate in design mode too, although I have not written any of our reports in CR 12 as yet.
I really need some help with this as this could cause issues in 500 reports already written in CR XI.
I hope someone has a very simple solution for me
Regards
Richard

Used a XI web service in dot net, but cannot access the message types .

I have created a web reference in dot net for a XI web service. In the front end i have a form which has 4 fields these are the fields of my request msg in XI. But when i compile the project, i get an error 'Reference to a non-shared member requires an object reference.' I'm not able to create a object of the request and response classes.
Need help.

Hi,
Please check on this blog:
/people/sap.user72/blog/2005/10/21/xi-the-underlying-connection-was-closed-an-unexpected-error-occurred-on-a-send

Oracle 11 g connection with asp dot net in visual studio 2008

Hi to all,
My application is using oracle 11 g as database in an asp dot net project . this was basically a project in asp dot net with sql server as a database . but now this need oracle 11 g as database . I have complete the db work, but i m getting the connection problem in visual studio (2008) with oracle 11 g .
I know for this it need a driver oracle.data.access ,, i do nt know which version it need ?
I have this dll . but version of it may be earlier. thats why it is not working properly
i have 11 g installed on the server computer , and we can only use it only on browser , I have a global.asax as a file in my dot net project in which connection string is written but i m getting error , something like ora10cc .
first i do not know , which odac version i have to download i have a link for this ,
http://www.oracle.com/technetwork/database/windows/downloads/index-101290.html
but which version exactly , this page is so confusing, for oracle 11 g, and visual studio 2008 which version will be perfect
and then where the dll will be there. after getting the setup, Is i need to install that setup?
one more confusion , where i have to install that odac , on my computer system . or on the server side system , I just need that dll file ,,
One more thing , Is there any error in my connection string ,,
my connection is as follows
"Persist Security Info=False; User ID= system; Initial Catalog=LabTrack;Server=Comp-34;Data Source=192.168.1.61\oracle11g;Password=abcd1234; DBA Privilege=normal;"
192.168.1.61 is ip addres of system, where my oracle 11 g is install ,
and comp-32 is my user name
labtrack is my db name
Is there any need of provider name ?
sumbody pls help me
i m getting problem in at from 3 days
If u can then contact me , on [email protected] , otherwise reply me here
thanks in advance
regards Nimish Goel

The file at the top of that link should work fine with Oracle 11g.
I would start trying to get the client to work outside of Visual Studio, first. That way you can localize your issues.
Once you get the Oracle client connected to the Oracle server, then uou can start working on Visual Studio.
As for where to install it, I'd say start with your computer. I'm not sure how you do your development, but that would probably be a good place to start.
You may want a different download for the web server as I assume you wouldn't need the special Visual Studio tools on it. But yes, it will need whichever Oracle provider you choose installed on it as well.

Calling Stored Function from DOT NET

Hi,
I am trying to call a stored function "PKG_MIS_USER_MASTER.ADD_USER(userid varchar2, password varchar2) return NUMBER" from my DOT NET application.
Everything works fine within TOAD. Can anyone please help me in writing the C# code for calling a stored function along with its return value.
Thanks in Advance.

You can (as of 15-JUL-2005) get chapter 5 and chapter 7 of my book from the ODP.NET homepage, which is located here:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
The link is at the bottom of the page.
The direct link is:
http://www.oracle.com/technology/books/pdfs/dotnet_ch5_7.pdf
Chapter 5 covers using PL/SQL from .NET.
- Mark

CProjects dash board fields not getting populated

Hi
Currently using cProjects 4.0 on ECC6.0 server.
Facing problem for dash board data. Have created the project in cProject. Completed all the tasks, phases and project header also. I want actual start and actual finish date data to appear on the dash board.
For evaluations I have done following settings:
Activated Use Dashboard for corresponding project type ('Define Project Types' under 'Evaluations' and 'Dashboard').
Specified when evaluations are executed as : Only with background processing ( 'Define Project Types' under 'Evaluations' and 'Dashboard').
Assigned the extract layout to the corresponding project types for the dashboard evaluations
Other settings:
Transaction SPRO -> Collaboration Projects -> Evaluations -> Define Extract Layouts
extract layour here is 0_DASHBOARD, attributes for this extract layout selected as Actual finish, actual start by checking the box of Always extract
But I am still unable to see the dates in the Actual finish and Actual start fields on the dash board for the project of that project type.
secondly,
Currently Actual start and Actual finish fields are hidden, I make them to displyed column in the settings, but whenever I leave the the home page and again come to home page these fields are again going to the hidden column. I want them to be shown permanently.
Please help on the same.
Thanks and Regards,
Niraj Sikligar

hi Yogesh,
I did the same as mentioned by you.
Now I am getting following error message:
Error when processing your request
The following error text was processed in the system EC6 : Property GROUP_AGGREGATION with the value X is not allowed for key figure (PRIORITY)
Any Solution?

Dashed boarder around a flash file

Does anyone know why in the new firefox a dashed boarder appears around a flash file?
This is what is happening (www.cartertilman.com):
-the page loads with no problem
-when you click on the flash file a dashed boarder appears all the way around the flash file
-when you click off of the file the boarder goes away, but if you
click back on it then it comes back
The boarder is gray and is about 1 pixel thick and appears to be either dashed or dotted. I am not sure why this is.
The site is a few months old, and never had this issue in any browser. If anyone knows why this is please let me know.

Hi Cathleen007 and welcome to our community
Did you ensure you copied the
standard.js file to the server too?
Cheers... Rick

Dreamweaver vs dot net

I am a print designer new to web site development.
I want to convince my boss to let me redesign the site using
DW (plus some additional coding as necessary for searches etc.) It
is a mid-sized book publishing company. The current site was done
(as I understand it) using dot net. They want me to redesign it but
have the tech person code it so they "don't incur too many new
costs...can use existing items already created" and "patch" them
into the new design.
Am I wrong to think this is short-sighted? The site is mainly
full of links pointing to static pages. Some book descriptions will
have to be updated/added. I assume I would create CSS files for
these, no? However there are a a few searches needed (for book
titles and author info). I assume these items would be more for a
true programmer.
Their only new expenses would be one version of Dreamweaver
and my time plus whatever is needed of the current tech person. Am
I correct? They are very concerned with costs.
Any input appreciated.
Gretchen

Would you be willing to post a link to this site? I'm worried
that the
content on the pages is dynamically drawn from a back-end
database, in which
case you would be walking into a maelstrom.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"InwoodLady" <[email protected]> wrote in
message
news:gh3ric$6ko$[email protected]..
>I am a print designer new to web site development.
>
> I want to convince my boss to let me redesign the site
using DW (plus some
> additional coding as necessary for searches etc.) It is
a mid-sized book
> publishing company. The current site was done (as I
understand it) using
> dot
> net. They want me to redesign it but have the tech
person code it so they
> "don't incur too many new costs...can use existing items
already created"
> and
> "patch" them into the new design.
>
> Am I wrong to think this is short-sighted? The site is
mainly full of
> links
> pointing to static pages. Some book descriptions will
have to be
> updated/added.
> I assume I would create CSS files for these, no? However
there are a a few
> searches needed (for book titles and author info). I
assume these items
> would
> be more for a true programmer.
>
> Their only new expenses would be one version of
Dreamweaver and my time
> plus
> whatever is needed of the current tech person. Am I
correct? They are very
> concerned with costs.
>
> Any input appreciated.
> Gretchen
>
>

Dash Boards creation:

Hi all,
Can anyone send me the step by step procedure to create dash boards in BW 3.5 and 7.0.
Thanks

Hi Nagar,
You can design dashboards using Web Application Designer (WAD), Visual Composer or Crystal Xcelsius . You can create a web template in Web Application designer and place the web items like Chart, Tables etc. depending on your requirement. The output will be a web page. You can create Flash based dashboards using Visual Composer / Crystal Xcelsius.
To design a dashboard in WAD, refer this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b26a3b74a4fc31e10000000a114084/content.htm
This link will give you more information about BEx Web Application Designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Arun Varadarajan gives more information about the different Dashboard tools in this thread.
Dashboards - VC vs BEx WAD
Regards,
Hari
Edited by: Hari Krishnan K on Aug 3, 2010 3:51 PM

SSO for Dot Net Applications

Hi all,
We are in the process of integrating dot net applications with SAP.
Can you please let us know the process to do SSO with the dot net applications which uses
1.Integrated windows based authentication.
2.Basic authentication
Regards,
Shyam.

Shyam,
You could refer to these threads.
.Net to SAP Portal (SSO)
.Net SSO with SAP
Reward points for handy posts!
Cheers,
Sandeep

DES Encryption compatibility between Microsoft dot Net and Java

Hi,
I have a situation that a Secret key is shared between two components like Core and the Customer. The customer encrypts a particular data using DES algorithm using the shared secret key. The customer uses Microsoft dot Net framework to do this. The encrypted data comes to core part which has been developed in Java. I want to know whether it is possible to decrypt the data value using DES algorithm which is coming from Dot Net platform. By the way I am getting different values. I want to know whether the byte[] in Java and Dot Net are same. Please provide me relevent answers to this question. Is it possible to make interaction with the cryptography between two differnet environments like Java and Microsoft Dot Net. I mean only DES algorithm.

DebadattaMishra wrote:
Hi,
I have a situation that a Secret key is shared between two components like Core and the Customer. The customer encrypts a particular data using DES algorithm using the shared secret key.Yuk! That is what SSL is for.
The customer uses Microsoft dot Net framework to do this. The encrypted data comes to core part which has been developed in Java. I want to know whether it is possible to decrypt the data value using DES algorithm which is coming from Dot Net platform. Yes though there are many pitfalls. The devil is in the detail of the .NET code. I would not tackle this without access to the full .NET encryption code.
By the way I am getting different values.This is not surprising since, as I said above, there are many pitfalls. The.NET documentation is poor at best and in some cases is very very misleading. Some of the .NET methods involved in key generation have obscure semantics and only after a very careful reading of lots of MS documentation did I start to understand the semantics.
I want to know whether the byte[] in Java and Dot Net are same. You should compare the 'bits' of each byte and not the numeric values since Java uses signed bytes.
Please provide me relevent answers to this question.This is not your call. Anyone is free to post answers as long as they follow the forum code of conduct.
Is it possible to make interaction with the cryptography between two differnet environments like Java and Microsoft Dot Net. I mean only DES algorithm.Of course!

Crystal Report and Dash Board Report templates

Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
Aditya

Hi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM

Getting Error while creating the proxy generator in Dot Net Connector 2003

Hi,
While creating the proxy generator in Dot Net Connector 2003 i am getting following error: I am successfully able to login into the SAP system and able to select the SAP tables but during the final step of proxy generator wizard i am getting following error:
----
Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
Object reference not set to an instance of an object.
OK

I have already installed the Java JVM on my machine its version is as follows:
java version "1.3.1_01"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_01)
Java HotSpot(TM) Client VM (build 1.3.1_01, mixed mode)
Regards,
Ravi Shah

Hi Amit,
I doing good!!!! Thanks for the response.
I uninstalled the earlier version of JVM and installed the latest version of JVM i.e. jre-1_5_0_09-windows-i586-p.
I got the proper entries under registry mentioned below:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Plug-in\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"UseJava2IExplorer"=dword:00000001
"HideSystemTrayIcon"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment]
"CurrentVersion"="1.5"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
"MicroVersion"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\1.5.0_09]
"JavaHome"="C:
Program Files
Java
jre1.5.0_09"
"MicroVersion"="0"
"RuntimeLib"="C:
Program Files
Java
jre1.5.0_09
bin
client
jvm.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Update\Policy]
"Country"="IN"
"PostStatusUrl"="https://sjremetrics.java.com/b/ss//6"
"EnableJavaUpdate"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start]
"CurrentVersion"="1.5.0_09"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_02]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_03]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_04]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.0.1_05]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_01]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.2.0_02]
"Home"="C:
Program Files
Java Web Start"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Web Start\1.5.0_09]
"Home"="C:
Program Files
Java
jre1.5.0_09
bin"
After installation I opened the Dot Net connector proxy client wizard . I followed the series of step during Dot Net connector configuration:
1. selected the SAP connector.
2. The next screen 'Enter Logon Information' comes where i entered the following information System as 'custom', host='IP address', Id='00' but by default it turns to '0' , client='800', user='user id' and password ='password'.
3. After clicking on Next button i am successfully logon into the SAP system.
4. The next screen in the wizard is 'selectall the remote function modules that you want to be part of your proxy object'. After selecting the SAP tables and clicked on Next button I am getting following error

Error in Proxy-Generator
To create a proxy directly from a SAP system, you must install a Java VM from JavaSoft
Inner error was:
INFO: using logging implementation "AII Logging"
Exception in thread "main" com.sap.aii.upload.api.LoginException$WrongPassword: Invalid user/password combination
 at com.sap.aii.upload.sap.SAPConnection.connect(SAPConnection.java:94)
 at com.sap.aii.upload.sap.SAPConnection.<init>(SAPConnection.java:38)
 at com.sap.aii.upload.tool.RFC2WSDLTool.getWSDLforRFCs(RFC2WSDLTool.java:81)
 at com.sap.aii.upload.tool.RFC2WSDLTool.main(RFC2WSDLTool.java:196)
OK

Thanks and Regards,
Ravi Shah

Consuming XI webservice in Dot net application.

I have created a Xi webservice and hosted it on a server.Now I want to consume this webservice in a dot net application. But while consuming it I get a binding error from the webservice.Does anyone has a solution fron this. Do I have to do some XI settings while creating web service.

have you used the WSDL created in XI - u can find it from http://<server>:<port>/wsnavigator/enterwsdl.html
Also use the link in soap:address location for your test purposes.
If proxy is involved in your network you will have to consider tht too and finally u sud use a XI user id to connect.

Using Dash board in Dot net Page

Similar Messages

Maybe you are looking for