Using Data Integrator with SAP BI 7.0

Hi,
We're currently using Data Integrator Version 11.7.2.0(using SAP ABAP adapter, BW adapter). Our primary data source is SAP R3 version 4.7 and SAP BW 3.5.
We're planning to upgrade to ECC 6.0(from SAP R3 4.7) and BI 7.0(from BW3.5).
I'm trying to determine if it will be necessary to upgrade Data Integrator also.
Can anyone tell me if Data Integrator Version 11.7.2.0 is compatible with SAP BI 7.0?
any document and advice will help us.
Thanks in advance,
Kyung Woo, Nam

Compatible? Likely.
Supported? No.
We have optimized the BW handling is DI 12.2 a lot, so do yourself a favor and upgrade to this version.

Similar Messages

Using Data Integrator with SAP ECC 6.0

Hi,
We're currently using Data Integrator Version 11.7.2.3. Our primary data source is SAP R3 version 4.7 We're planning to upgrade to ECC 6.0.
I'm trying to determine if it will be necessary to upgrade Data Integrator also. Can anyone tell me if Data Integrator Version 11.7.2.3 is compatible with SAP ECC 6.0?
I'm sure there is a document somewhere but I have been unable to find it.
Thanks,
Mark Duff

Data Integrator 11.7.2.x is compatible with ECC6. Depending on which platform you're using, here are the documents that give this information:
[Linux|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00aad14-ac3e-2b10-3b85-8208305073b1&overridelayout=true]
[HP-UX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/0075f72d-ab3e-2b10-28bb-9708525a9f42&overridelayout=true]
[Solaris|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d03ba272-ac3e-2b10-9cb0-84156ef467ec&overridelayout=true]
[AIX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2057d8d9-a83e-2b10-a997-e4f31f730524&overridelayout=true]
[Windows|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d069a060-b03e-2b10-3c8c-a59f5f4d8ce3&overridelayout=true]
You should keep in mind, however, that Data Integration 11.7.x mainstream maintenence end date is June 2010. Because of that, you may want to consider upgrading to Data Services XI 3.0 or 3.1.

Oracle Meter Data Management Integration with SAP ISU

Hello Everyone,
I am aware of the fact that Oracle has released a Media pack for the subject integration as discussed here and that media pack works only for SAP ERP 6.0 EHP 5 with ISU_AMI_2.
We have got OU MDM Release 2.1 Media Pack v4 and SAP ERP 6.0 EHP 4 with ISU_AMI_1 and hence Adapter in MDM won't help to achieve integration with SAP as our SAP EHP is lower than what is required for the MDM adapter. We have got SAP PI which would help the SAP End in the integration.
What are the possible work-around(s) to achieve the integration between Oracle MDM and SAP ISU without using the Media Pack/Adapter?
How does MDM exposes its services (inbound/outbound) to be consumed/triggered by External systems (i.e. SAP ISU)?
List of Services (inbound/outbound) exposed by Oracle MDM for integration?
Your time and help is much appreciated.
Regards,
Adil Khalil

Did you find the document Oracle Utilities Customer Care and Billing - Meter Data Management Integration Implementation Guide?
I searched on eDelivery and Oracle Support, but cannot find the document.

Upload Excel sheet using Data Integrator 6.1?

hi all ,
Upload Excel sheet using Data Integrator? and how to create ODBC for the PC and jobserver i am using version 6.1? i am using excel as my one of the data source and tell me how to use different types of data sources in DI . after uploading the xl file if i apply any transform on the excel data i will give error like
Posted: 25 Sep 2008 04:30
Post subject: Re: Upload Excel sheet using Data Integrator?
I am getting the error like
3128 292 CON-120302 09-25-08 09:59:40 ODBC call <SQLDriverConnect> for data source <sas> failed: <[Microsoft][ODBC Driver Manager] Data source name not found and no
3128 292 CON-120302 09-25-08 09:59:40 default driver specified>. Notify Customer Support.
1512 2992 CON-120302 09-25-08 09:59:41 ODBC call <SQLDriverConnect> for data source <sas> failed: <[Microsoft][ODBC Driver Manager] Data source name not found and no
1512 2992 CON-120302 09-25-08 09:59:41 default driver specified>. Notify Customer Support.
Please help me out
Thank u

Hi Shonti,
The DI 11.7 installer can be used to upgrade a DI 6.1 local repository (e.g. the upgrade is supported). This will migrate all jobs and flows. They will remain intact, however, this is always a major migration effort and should not be taken lightly. If you do upgrade, please make sure this is a planned effort with rigorous testing and validation. You should also ensure that you consult the release notes and [supported platforms documentation|https://websmp110.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000712240&_SCENARIO=01100035870000000202] for the 11.7 package you intend to install. The DI 11.7 documentation also contains info about how to install and configure the Excel Adapter, and what functionality it provides.
Thanks,
~Scott

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

How can SMART METER Technology be integrated with SAP ISU system?

At present the SMART METER technology is integrated with SAP ISU through a third party vendor. The idocs are sent to a third party and the readings are downloaded and sent back in idoc segments.
How can the integration be done without the third party intervention.

HI
SAP XI needs to be used for 3rd party intervention to send and recive idocs..
or there are some thrid party softwareslike MDUS ,meter data utilisation system.which wil be again a interface between sap and ami system
so basically its like sap syst--sap xi3rd patry 4 ami comapnyami system
kr
raj

Weighing Scale integration with SAP ( Packing Station)

Hi All,
    We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
    I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
    Would you plz help me with some work-arounds ...???
Regards
Jamna

Hi Folks,
    There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna

Issues in BO integration with SAP EP

Hi All,
integration of SAP EP 7 and BOexi3.1.
My requirement is to show the BO WEBI reports in portal. My scenario is like directly connecting to BO from EP using SSO with out connecting to BI.
For Bo,Only data is comming from BI , Roles and user creation are saperately is done in BO only. Is it possible to connect do sso between SAP EP and BO with out connecting to BI.
BO is not using any Active Directory., users and roles are created in its own database and Portal users are stored in ume data base. how to achive sso between SAP EP and BO.
Thanks
Rajeev

Hi,
Go through the below link which gives great details on the BOXI integration with SAP EP.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x
You should be able to get the SSO details also here.
Regards,
Noor.

Sms integration with sap b1

HI to all,
    can it possible if sms integration with sap business one. means if i create a/r invoice if i add the document automaticlly send sms to the customer in that sms following matter to be send
invoice number,posting date,due date,invoice amount.can it possible .if yes then what is requirement for that.pls reply i will waiting for your reply...
Regards,
vishal.

hi
1.Create class library in Visual Studio 2005 C# Express Edition create assembley SQLCore
Write code:
using System;
using System.IO;
using System.Text;
using System.Net;
namespace SQLCore
    public static class SMS
        public static void PlusSend(string Sender, string Recipient, string Message)
            string Destination = "http://www.text.plusgsm.pl/sms/sendsms.php";
            string Data = "?tprefix=" + Recipient.Substring(0, 3) + "&numer=" + Recipient + "&odkogo=" + Sender + "&termin=0&tekst=" + Message + "&godz=00&min=00";
            SMS.PostStringToURI(Destination, Data);
        private static void PostStringToURI(string URI, string String)
            byte[] Bytes = Encoding.UTF8.GetBytes(String);
            HttpWebRequest Request = (HttpWebRequest)WebRequest.Create(URI);
            Request.Method = "POST";
            Request.ContentLength = Bytes.Length;
            Request.ContentType = "application/x-www-form-urlencoded";
            Stream RequestStream = Request.GetRequestStream();
            RequestStream.Write(Bytes, 0, Bytes.Length);
            HttpWebResponse Response = (HttpWebResponse)Request.GetResponse();
            if (Response.StatusCode != HttpStatusCode.OK)
                string Message = String.Format(
                "POST failed. Response staus {0}.",
                Response.StatusCode);
                throw new ApplicationException(Message);
for your localization you have to find your own sms gateway.
2.Compile project .
3.Copy dll to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn
4. Set SETTRUSTWORTHY on true using
ALTER DATABASE databasename SETTRUSTWORTHYON;
go;
[more info about SETTRUSTWORTHY|http://msdn2.microsoft.com/en-us/library/ms187861.aspx ]
5.Create Assembly for your dll.
CREATE ASSEMBLY SQLCore
FROM 'C:\Program Files\Microsoft SQLServer\MSSQL.1\MSSQL\Binn\SQLCore.dll'
WITH PERMISSION_SET = EXTERNAL_ACCESS
6. Create Procedure
CREATE PROCEDURE dbo.[PlusSend](@Sender nvarchar(max), @Recipient nvarchar(max), Message nvarchar(max))
AS EXTERNAL NAME SQLCore.[SQLCore.SMS].PlusSend
go;
7 .Fially execute using
EXECUTE dbo.[PlusSend]('SENDER'','PHONE NUMBER','Message')
Insert it in transaction notification.
Hope it helps.

Best practices of integration with SAP Netweaver

Hi All,
I'm totally new to SAP Netweaver but I have a task to integrate our system with SAP ECC (R/3). We are using SAP Netweaver 6.4. The goal of integration is to provide for user list of available modules (Sales and Distribution, Human Resource, Payroll, etc) and when user selected for example Payroll we need to display list of available BAPIs. In general weare able to create Enterprise Web Service for some BAPI and consume it. But the problem is that everytime when administrator changed BAPI process (for example added new field to Business Object) we need to regenerate wsdl and change our client application. Does Netweaver provide some Web Service which can retrieve list of applications, list of BAPI processes and can retrieve meta data of some BAPI? Something like Partner Web Service interface?
We are looking for best practices of integration with SAP Netweaver. We are trying to develop something like adapter which will be able to pull data into SAP ECC system is there any generic way to develop this adapter?
Thanks in advance for your help.
Yura.

Hi Yura !!
As far as I know, this is not possible yet. Using SAP Netweaver XI/PI, although it adds value to the webservice scenario exposing BAPI functionality, it also needs to maintain a refreshed version of the BAPI definition in its repository. Depeding the complexity of the change in the BAPI structure, maybe PI may allow you to continue working without changes.
Maybe a good practice is not to make too much changes to a production BAPI, instead make a review in development environment, and once it is stable, use it in production. Other good practice is to keep older versions of BAPIs and add the changed ones as new versions to have back-compatibility
Regards,
Matias.

Essbase data integration with Netezza

Does Essbase 9.3.1 support data integration with Netezza?

Hi Shiva,
If you have Data stage then you can use this ETL to extract the data from IBM AS400 to SAP BI.
In order to enable extraction of data and metadata from non-SAP sources on the application level, SAP BW provides open interfaces - staging BAPIs. BAPIs (Business Application Programming Interface) are standardized programming interfaces that offer external access to the business processes and data of a SAP system. These interfaces enable connection between various third-party tools (such as Extraction, Transformation and Loading) and SAP BW. In this way, for example, data from an Oracle application can be transferred to SAP BW and can be evaluated there.
Similarly you can tranfer data from Data Stage to your BW system.
You can find more information on data transfer using staging BAPIs in your SAP BW system in the BAPI Explorer (transaction BAPI). On the Hierarchical tab page, choose SAP Business Information Warehouse --> Warehouse Management.
Plz check the below Link :
Web site: http://ibm.ascential.com/solutions/business_intelligence.html
Regards
Ram.

CAD integration with sap

could any CAD integration experts give me some integration capability documents? i'm new to this area, just want to know the integration points between the cad and sap...for example: I've read some material, it saids that when the CAD design is near to complete, the material used in CAD will be transferred to SAPu2026
The question is: how the CAD material is integrated with SAP material master data? is this two different set of material master data? thanks in advance!

Hi,
It is not required to use interface only when the design is completed in CAD..these interfaces are bulit in such a way it will support complete CAD document life cycle ...
http://wiki.sdn.sap.com/wiki/display/PLM/CADIntegrationin+PLM
Thanks,
Suresh HP

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

MS Word integration with SAP CRM: can a PDF be created from the MS Word doc

21/11
Gurus,
I know have a better understanding of the topic but still have 2 open questions.
I now know that StreamServe cannot read .DOC files but can read and work with .PDF files.
Since we are in a SAP forum and not a StreamServe forum,
1/ I am wondering if SAP CRM 2007 can convert the MS Word generated and populated documents into .PDF. Possibly immediatly.
2/ Can the MS Word generated and populated documents be saved by SAP CRM 2007 as .XML files?
Thanks again.
Dear All,
On my project, there is a requirement to generate ad-hoc and amendable letters in CRM (2007).
We might have +150 letters so I am thinking about using MS Word integration with SAP CRM to deliver this.
With SAP CRM 2007, I understand that it is indeed possible to generate WebServices that will then be consumed by Word templates through the mail merge functionality. So agents will not have to enter BP name, address and so on. All this can be done by configuration which is great.
My point of concern is how to integrate this design to StreamServe for printing purpose (we do not want to go into local printing)
Can StreamServe collects the Word generated document?
Should this Word document be converted as PDF before or can StreamServe do it?
Should StreamServe exploits the XML contents within the Word generated document?
Thanks for your help and insights about this.
Brice.
Edited by: Brice Vialle on Nov 21, 2008 9:26 PM
Edited by: Brice Vialle on Nov 21, 2008 9:34 PM

Hi Chris,
    Your advice helps me a lot, thank you.
    I upload an XML-Format template Word Doc to server as a MIME Object.
    When OfficeControl is started in Web Dynpro, OfficeControl automatically open the XML-Format template.
   For the first time, I get the XString-type Context attribute bind to the content of the Word Doc,
   then translate it to string, I got the XML-format content, it's great!
   However, after the first time, when I input any new contents in MS Word in Web Dynpro,
   no matter I execute "Ctrl + S" or click the "savedocument" button,
   when I translate the XString Context attribute to String, I got messy code. (but the first time, it is good plain text)
   I use the function module: ECATT_CONV_XSTRING_TO_STRING (good for first time, dump after first time),
   SCMS_XSTRING_TO_BINARY, SCMS_BINARY_TO_STRING (good for first time, messy code after first time).
   My Demo source code is in: (system) SMV --> (local object) zhaode --> (Dynpro Component) ztest_office_control
   core source code is as:
   clear itab.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER = lv_datas
    IMPORTING
      OUTPUT_LENGTH = lv_length
    TABLES
      binary_tab = itab.
CALL FUNCTION 'SCMS_BINARY_TO_STRING'
    EXPORTING
      input_length = lv_length
      mimetype = 'text/plain; charset=utf-8'
    IMPORTING
      text_buffer = lv_datas_string
      output_length = lv_data_len
    TABLES
      binary_tab = itab.
    Can you give me some advice?
Best Regards,
Derek

MM Configuration for integration with SAP SNC

Hi,
I need to make MM configuration required to support PO collaboration and SMI process integrating with SAP SNC.
ANy kind of information would be very much helpdull
Thanks
Vikas

Hi Vikas,
MM configuration for PO collaboration is depend upon the your requirements. e.g. You want to upload the confirmations send by the supplier from SNC web UI to your R/3 system you have to use confirmation control key while creating PO in R/3 and make corresponding supplier confirmation control either optional or mandatory in SNC configuration. Default provided by SAP is optional.
Remember supplier can create confirmations only if ther either optional or mandatory.
Regards
Pravin

Using Data Integrator with SAP BI 7.0

Similar Messages

Maybe you are looking for