Using Data_pump in 11g 32 bit to 64Bit

HI All
Few days back we have successfully, migrated 32bit to 64bit data through cold backup. And 64bit machine is ready now.
What we are thinking here we want to perform again current Data backup restore of 32Bit Machine to 64 Bit machine through Data_Pump. My question is here, IS there again need to upgrade database in any way or Data_Pump will perform it automatic upgrade while we are performing restore process?
Please guide here.
Regards,
P

871536 wrote:
HI All
Few days back we have successfully, migrated 32bit to 64bit data through cold backup. And 64bit machine is ready now.
What we are thinking here we want to perform again current Data backup restore of 32Bit Machine to 64 Bit machine through Data_Pump. My question is here, IS there again need to upgrade database in any way or Data_Pump will perform it automatic upgrade while we are performing restore process?
Please guide here.
Regards,
P
Hi,
No you don't need to perform the upgrade again. What you need to do is expdp the schema in 32bit and impdp to 64bit (drop your existing schema or remap to new schema)
Hope this helps
Cheers

Similar Messages

SSIS Oracle 11g 64 bit client upgrade Issue

After the oracle client upgrade from 10g to 11g, the ssis jobs are getting failed for the BadImageFormatException. Attempt to load Oracle client libraries threw This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed.
But the same package with same system requirements and same sql agent configuration is wroking fine in DIT. Please find below the system configuration in both environment.
DIT
Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode since we are using the are using the .Net Provider/OracleClient Data Provider connection manager to the database .
UAT :
Oracle Client - Oracle 11g 64 bit , Microsoft SQL Server - 32 and 64bit, Windows machine - 64 bt SP4, In job there is no configuration in command line to run in 32 bit mode
In UAT, Everything looks as DIT but the job is not working fine in DIT.
I have gone through all the thread related to 32 64 bit, .Net Oracle client provide but i haven't found any solution for this problem.
Can you please tell me the missed out configuration in DIT and UAT? the exact problem for this issue ? what is the oracle components required for this connection? Its urgent.
What is missing in the oracle end?
Thanks
Satheesh

32 bit apps will need 32 bit Oracle client software installed.
Hope it helps,
Greg

Does Oracle 11g 32-bit can run on Windows Server 2012 (64 bit) ?

Hello!
I´ve bought Oracle 11g Standard Edition One 4 years ago, (Release 1 11.1.0.6.0 )
and installed on a Windows Server 2008 (32-bit)
We ara planning migrate out BD to a new server with Windows Server 2012 (64-bits)
Can i install and use that Oracle version on the new server ?
or
Can i download and use the same version @ 64-bit with the licence i have with the 32-bit version?
or
Do i need to purchase a new Oracle version specially for 64bits?
Thanks in advance

Hello, me again... (sorry for insist)
4 years ago, we purchased and use an Oracle 11g Standard Edition One Release 1 ( 11.1.0.6.0) @ 32 bits, and runs very good on a winsvr 2008 @32 bits.
I was told i can run Oracle without problems on a WinSvr 2008 @ 64bits
So we'd like to move it to a new server (WinSvr2012 @64bits)
So my question is
* Can we download and use it legally a 64 bit version, or we need to purchase another licence?
* If so, where can i download it?
Thanks in advance

JDBC Connection Reset when using many processes on 64 bit system

Hi,
we've a annoying JDBC connection problem since we migrated our Java server to a 64 bit operating system. Here our environment.
Database Machine:
Oracle 10g
Linux 32 Bit (but same problem on 64 Bit)
Application Servers Machine:
JDBC driver 11.1.0.6
SUN Java 1.6.0_06 64bit
Linux 64 bit (SLES 10 SP2)
We have 6 different Java server processes (but with the same code) which all create some connections to the same database (running on a different Hardware). All 6 Java server processes starting at the same time (via scripts).
Everything was fine, until we migrated the application server machine from 32 bit Linux to 64 bit Linux. From this day on, the half (or one more or less) of our application server processes can't longer connect to the database. The application server processes which have the problem product the following stack trace:
java.sql.SQLRecoverableException: I/O Exception: Connection reset
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:281)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:118)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:224)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:296)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:611)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:455)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:494)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:199)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:30)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:154)
at com.aaaa.utils.db.DbConnectionPool.<init>(DbConnectionPool.java:130)
It looks like a network problem with the system but all other network stuff works without problems, between the two machines.
- We use the thin JDBC driver (no OCI)
- No firewalls are active on both systems
- Both systems are in the same subnet connected to the same switch
- The DNS configuration on both systems are ok (forward and reverse)
- We've found the same problem on different application-server/database-server pairs with 64 bit application server hardware - but not all of our 64 bit server systems have this problem.
- When running application server process and database on the same system (connecting via localhost) the problem does not longer appear.
- The same database machine connected from a 32 bit application server (with 6 different java processes starting at the same time) works without a problem.
We've tried a lot of things to isolate the problem - but with no success.
- Same problem with SUN Java 1.6.0_06 32 bit (on 64 bit Linux)
- Same problem with SUN Java 1.6.0_15 (32 and 64 bit)
- Played with some JDBC connection properties (oracle.jdbc.TcpNoDelay, oracle.jdbc.ReadTimeout, oracle.net.CONNECT_TIMEOUT, oracle.net.disableOob, oracle.jdbc.RetainV9LongBindBehavior, oracle.jdbc.StreamChunkSize) without a positive result.
- We've updated Linux network driver
- We've changed to an completeky other NIC
- We've tried an other Linux 64 distribution
- We've increased the PROCESSES parameter in the init.ora
- We've tried the JDBC driver 11.1.0.6
- We've tried the _g version of the JDBC driver, but the debugging output simply tell us "Connection Reset" without a hint why.
- We've tried a more complex JDBC connect string (
"jdbc:oracle:thin:@(DESCRIPTION=" +
"(ADDRESS_LIST=" +
"(ADDRESS=(PROTOCOL=TCP)" +
"(HOST=host)" + =
"(PORT=port)" +
")" +
")" +
"(CONNECT_DATA=" +
"(SERVICE_NAME=sid)" +
"(SERVER=DEDICATED)" +
")" +
Nothing of this things helped us to isolate the problem.
When we start our application server processes with a long pause (>1 min) between every process start. The problem does not occure. When we start only one application server with the same number of connections as the 6 different application server processes, everything works fine.
We have absolute no idea why
- this only occures on 64 bit Linux
- independent if it's a 32 bit or 64 bit JVM
- does not occure on all 64 bit application server machines / database machine pairs
- never occure on the same 64 bit app server hardware when using a 32 bit Linux
- using the Oracle JDBC 10g driver (10.xxx) there is no problem (but because of other issues, we need to use the JDBC 11g driver)
Does anybody has an idea what our problem is?
Thanks in advance,
greetings

I was recently struggling with this exact same problem. I opened a ticket with Oracle and this is what they told me.
java.security.SecureRandom is a standard API provided by sun. Among various methods offered by this class void
nextBytes(byte[])
is one. This method is used for generating random bytes. Oracle 11g JDBC drivers use this API to generate random number during
login. Users using Linux have been encountering SQLException("Io exception: Connection
reset").
The problem is two fold
1. The JVM tries to list all the files in the /tmp (or alternate tmp directory set by -Djava.io.tmpdir) when
SecureRandom.nextBytes(byte[]) is invoked. If the number of files is large the
method takes a long time
to respond and hence cause the server to timeout
2. The method void nextBytes(byte[]) uses /dev/random on Linux and on some machines which lack the random
number generating hardware the operation slows down to the extent of bringing the whole login process to
a halt. Ultimately the the user encounters SQLException("Io exception:
Connection reset")
Users upgrading to 11g can encounter this issue if the underlying OS is Linux which is running on a faulty hardware.
Cause
The cause of this has not yet been determined exactly. It could either be a problem in
your hardware or the fact
that for some reason the software cannot read from dev/random
Solution
Change the setup for your application, so you add the next parameter to the java command:
-Djava.security.egd=file:/dev/../dev/urandom
We made this change in our java.security file and it has gotten rid of the error.

Report Builder 11g on Windows 7(64bit)?

Hi Oracle Guys
I know that Report Builder 11g is not certified on Windows 7 (64Bit)
Knows someone if release 2 it is planned ?
Or knows someone for when the releases 2 or a patch is planned?
We want to install next year new Developer-Clients and we want to know if Windows 7 64bit is an “no go”
thx
Alfred
Edited by: alinzenb on 16.08.2010 15:47

I use the 11g Reports Builder on 64bit Windows 7.
It works fine except that it doesn't like the Aero interface. Windows automatically switches to basic mode when you're running the builder.
If you're ok with that then you shouldn't have any problems.
Cheers,
Toby.

Cannot Install 11g 64 bit client on Windows 7 Professional 64 bit OS

I am trying to install Oracle 11g 64 bit client on Windows 7 64 Bit Professional. I'm running setup as administrator and all prerequisites fail with Actual Value not Found Expected value not found. I select ignore and press next and the application just silently shuts down. Log is too big so here is an abbreviated log.
Here is the installation log
Thanks in advance!
Using paramFile: C:\temp\win64_11gR2_client\client\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\temp\win64_11gR2_client\client\install\../stage/produc
ts.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME xxx-xxxxxxx-xxx.xxx.xxxxxxx.xxx
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 2030
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@94b318
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Administrator
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@74d175ff
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@3850620f
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\temp\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Users\xxxxxxxx\AppData\Local\Temp\OraInstall2012-04-17_11-11-24AM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\app\xxxxxxxx\Oracle\product\11.2.0\client_win32\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files (x86)\Roxio\OEM\AudioCore\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is oracle.install.commons.base.interview.common.view.PrereqGUI@64d90254
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

I disagree with your assessment, for two reasons.
One is the severity for RAM is listed as Severity:IGNORABLE.
Secondly I just saw this happen to myself just a moment ago (which is how I found this threat) as well using a silent install on a Windows 2008r2 server I can install to using the setup.exe manually. so disk and memory really isn't an issue.
I suspect something else is going on here. If you read those warnings the Critical they are just the last two about disk space and the PATH variable. Perhaps I am not running as elevated as I thought or the C$ share is not reach able. I am going to keep trying and will report back here when I get my silent install working.
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Oracle 11g 64 bit - "Value too large for column" when setting Varchar2

Hello guys,
I have a machine running Oracle 11g - 64bits. And I have a table that contains a VARCHAR2(2000) field.
When I try to set the value of this field to a string that contains double byte characters, I get this error:
ORA-12899: value too large for column "QAPBG1220_11"."MYTABLE"."MYFIELD" (actual: 2433, maximum: 2000).
Although the value I'm setting is only 811 characters (€ sign).
The weird thing is that when I try to run the same query on another PC with Oracle 11g, 32 bits, It runs normally and the values are updated!!
Anyone has any idea about this? It's driving me crazy
Thanks in advance
Zahraa

create table MYTABLE
MYTABLEID NUMBER(10) not null,
MYFIELD VARCHAR2(2000)
alter table MYTABLE
add constraint PK_MYTABLE primary key (MYTABLEID);
INSERT INTO MYTABLE (Mytableid, Myfield) VALUES(1, '€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€fds€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€€')
COMMIT;
On the 32 bit, this works fine. I get the record with the values 1 and 2000 euro signs.
On the 64 bits, there is one machine (oracle 11.2.0.1.0) that adds the row, but when I view it, the value shows as "????"
and another machine (oracle 11.1.0.7.0) that throws an error:
- "String Literal is too long" : if there are more than 1333 euro characters
- Value too large for column .... : if there are less than 1333 and more than 666 characters.
Any ideas?

Oracle EBS Inbound/Outbound Interface build using Oracle SOA 11g

Hi SOA Guru's,
I am very much new to SOA 11g, could you guy's help me in understanding "How I can build any Oracle EBS Inbound/Outbound interface using Oracle SOA 11g"
It will be great if anybody explain me with any example script/screen shot/document.
Thanks in advance.
Regards
Pankaj

I don't have any experience with ebs, but i assume it works like this.
In the composite editor you will find a list adapters at the right..over here you will also find the oracle applications (ebs) adapter.
This will be the component for you which will communicate with the ebs packages.
you need to drag this adapter on the swim lane, and after that you should create the composite application like the way it's described in the tutorials Oracle supplies, put a mediator component in the middle and expose this interface (drag the line to the left swim line)
Hope it's a bit clear like this ?
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10224/fod_intro2.htm
this should make a few things clear too

Oracle 11g, 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit

We just changed over to Windows 7 64 Bit now we trying to find out what version of Fusion Middleware will run on Windows 7 64 bit. Most posting say you can't install
Oracle 11g 64 bit on Windows 7 64 bit OS, but we have found a few that say they have found away to install 11g 64 bit. Not one of them shows you the install
from start to finish and some of the posting go back to 2009!
If this has been a problem from 2009 - present can some tell why Oracle has not provided a fix or update for Windows 7 64 bit and are they going to in the future?
If anyone knows how install Oracle 11g 64 bit, Forms 11g 64 bit on Windows 7 Professional 64-bit please let me know!
Thanks!
Monty

Monty,
I assume that you mean the developer tools? They are kind of in limbo with 64-bit support for the dev tools, but if you want to get the latest (as of today) release working, you can do this:
1). Install a 64-bit JDK
2). Install WLS 10.3.4 generic (use the 64-bit java)
3). Install Forms/Reports 11.1.1.2 (install only, don't configure)
4). Install Forms/Reports 11.1.1.4 (install only, don't configure)
5). Edit your PATH system variable so that it doesn't contain any parenthesis. I did this by creating a junction point for c:\program files (x86) and using the junction point in the path
6). Run the configuration utility to create the forms/reports domain. Be sure to specify the dev tools
7). Look in the start menu for the Reports Builder icon. It will be pointing to a batch file. Edit that batch file to comment out the lines that print a message and exit (because you're on 64-bit)
Not officially supported, but it works for me.
John

Kill processes (using Javascript) on a 64-bits machine (Windows Vista, 7, 8, 8.1)

Hi everyone. I have a simple VBScript sample that kills a process by name. It works fine on every OS, X86 and 64 bits :
---------------------------kill process sample----------------------------------------
Set wsh = CreateObject("Wscript.Shell")
wsh.Run "calc.exe",1
Set Processes = GetObject("winmgmts:").InstancesOf("Win32_Process")
For each Process in Processes
Select Case LCase(Process.Name)
Case "calc.exe"
Process.Terminate(1)
I tried the "for" loop, the "forEach" loop and "switch" in javascript but none of them work like in VBScript.
Could anyone help me converting this script sample to javascript, since VBScript became obsolete and God knows whether it will be available for HTA applications and Windows Script Host files in the near future.
Thanks a lot in advance.

Jvr, you said :
"What you have done is one of the reasons why support for ActiveX is being dropped. By allowing unsafe controls you have removed the most important security restriction.
I highly recommend that you spend some time learning Windows but not from web sites or from people who are just hackers.
If you are going to alter IE you might as well just use an HTA. It doesn't reduce security and is much easier to use.
You are trying to do what a lot of new and untrained people try. You are trying to reinvent Windows but mostly because you do not have fundamental technical training. Get the training and you will not be led down these pointless paths.
NTVDM is not CMD.EXE. NTVDM is used to emulate a 16 bit DOS environment. It is not required for NT or for CMD.EXE. It is disabled by default on all modern versions of Windows. 16 bit applications can be a security issue and
do make managing Windows harder."
One of the best features of IE might be ActiveX technology. I could be wrong, but some controls are still highly used by websites, and a lot of softwares help rely on HHCTRL ActiveX. I don´t see it *currently* being dropped.
Could be in the future, but not only IE uses Activex, a lot of programs make use of them, not to mention popular ones like Word, Excel.
My friend, I use Windows for more than a decade, don´t tell me what I have to learn or not. You´ve got to be kidding because I know a lot but of course I am humble to admit I ´don´t know everything and can at times have doubts, other people can help
just like I could help when someone has a doubt on something I know. Also I dont know why you are talking about hackers. As far as I know they *must* know the OS in order to exploit stuff and run their malicious code, not only know how to exploit general vulnerabilities,
so I bet the real hackers have a lot to teach.
I am not untrained, sorry but you must be high since you are not reading my posts correctly. I said I altered security setting for the *INTRANET ZONE*, not Internet, and also set the "Websites in less privileged zones can navigate to thiz zone" to deny.
And if you are an expert you must know the intranet zone is disabled by default, which is my case, but if you add an IP address or website, then it will be enabled *only* for them. Furthermore an attacker would need to know what is the IP address I added and
would need to bypass the cross site scripting filter and also the setting above that I disabled.
Again, you´ve gotta be high. I never said CMD=NTVDM. NTVDM just emulates a 16 bits program which is Command.com, I said in the other post, didn´t you read?
And you can´t tell if MSHTA, ActiveX and WSH will be totally removed from Windows in the future, it is only a possibility. They are useful. 16 bits apps are not but are still supported on 32-bits Windows. Check out on a 32-bits system, and tell me if
you found some 16-bits apps including C:\windows\system32\command.com.
Hope now you understood what I have written.
cheers.

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
Here is a screen shot of the error message:
Message was edited by: Joseph Costanza, Jr.

See here for a solution.

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

How to use Internet Explorer 11 64 bits rather than the 32 bit version, on Windows 7 familial premium 64 bit

Hi,
my system : up to date computer, W7 familial premium (64 bit), Internet Explorer 11 (32 bit)
I use this computer on the web to visit just one website, always the same and several hours a day ; this site advocate the use of Internet Explorer 64 bits for more efficiency.
How can I get to install, or switch to the 64 bit version of Internet Explorer, as presently when I try to install a downloaded version, I get as an answer something like "installation not possible because the more up to date version of Internet Explorer
is already installed on your computer". Thanks

Hi,
On a 64-bit version of Windows, please click system drive, there should be a “Program Files” and “program Files x86”,
the "Program Files" folder is for 64-bit programs and the "Program Files (x86)" folder is for 32-bit programs, you will find IE11 64 bit has already installed in you system in “Program Files”>”Internet explorer”.
Regards,
Yolanda
Yolanda
TechNet Community Support

Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic?

Is it possible to use SOA Suite 11g with JDeveloper's integrated WebLogic? Or do you have to install an external WebLogic?
Thanks for help.
Edited by: user7722720 on 07-Dec-2011 02:04

Hi
By default, NO it is NOT possible to deploy any SOA Applications on Integrated Weblogic Server that comes with JDeveloper. This integrated weblogic server is very light weight basic weblogic server with single domain (only 1 AdminServer) to deploy a standard J2EE, ADF Applications like EJBs, WebApps, WebServices, ADF Apps etc. BUT SOA (having BPEL, BPMs etc ) cannot be deployed.
There is an option to upgrade this integrated weblogic server and install SOA on top of this. Like download soa installer that matches with your JDeveloper version and install soa on top of this weblogic. BUT I strongly do not recommend this, because you will not be able to upgrade iin future to the latest versions.
Yes, its always better to install the standalone Weblogic Server that matches with your JDeveloper version. Then install SOA on top of this Weblogic Server. Then create RCU Schemas in any Oracle Database. Run config wizard and create a SOA Domain. Now integrate this in your JDeveloper to deploy any soa applications.
Make sure that JDeveloper, Weblogic Server, SOA Software, RCU all these versions should match and they should be same.
Thanks
Ravi Jegga

Using Data_pump in 11g 32 bit to 64Bit

Similar Messages

Maybe you are looking for