Using Developer 6 with Unikix

I need to convert several existing Forms and Reports to access an Informix database via a Unikix api server. The Forms and reports were developed on NT and the Informix db runs on an HP Unix platform. I would welcome feedback from anyone having experience with similiar configurations to find out what the problems are.

Hi,
>
but if i use apex , then i have to use xe database , and i can not save more than 11gb of data on it ,
>
Not correct. APEX runs on all Editions of 11g DB.
>
and i think it is too small capacity , is there any solution for this problem ?
>
You need to buy one of the licensed editions.
The Licensed editions do not have database size constraints (unless you are talking peta, not sure if SOne supports it!) . But of course there are other differences.
Regards,
PS: BTW, what would you do with Forms for the DB size? So, a proper DB is in any case a prerequisite. The only savings you can think of are in the development and deployment area.
The only free one I believe could be LAMP.
Edited by: Prabodh on Jun 23, 2012 5:26 PM

Similar Messages

  • Can NI-PSP be used to communicate between machines developed with different versions of LabVIEW?

    Hi all,
    A customer has a large PC application developed with LabVIEW 2010 SP1.
    They would like to add extend their system with a cRIO-9075. According to this document (ftp://ftp.ni.com/pub/devzone/tut/crio_software_versions.htm ), the minimum supported version of LabVIEW (with Scan Engine support) is LV 2011.
    To minimize risks, it is preferred that we don't upgrade LabVIEW for the main application, which is atively being used in production.
    I was thinking of developing the cRIO software in a newer version of LabVIEW (say, LV 2013 SP1), and using shared variables only to communicate between the PC and the cRIO.
    Is this a viable option? Does it matter if the PC and the cRIO have different versions of the LV runtime?

    It shouldn't matter, but then with shared variables you can never know for sure -- there are so many things that can make them break.
    You might be money ahead to write the comm using TCP/IP. You know that will work.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in li

    I use lightroom with the soft proofing feature for my printing. I used to make a copy proof, but all of the sudden something changed, and even if I'm on the copy in the developing mode it prints the original. Also, If i chose a file that was already in light room to print, even though I have the chosen file up in the developing mode, it will instead print the most recent file that I added to lightroom. If found a way to work around these problems, (check make this the copy in the soft proofing, and copy my settings and delete and reload the old files) but it's a slight hassle and it didn't use to do this. Not sure why it changed. Could I have accidentally changed a setting?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • EJB developing in using NWDS with JDI

    i created EJB for client java proxy before creating DC.
    but i can not check-in it.
    do i have to create New DC? and then do i have to create EJB inside DC? or SC?
    if i have 10 EJB and 10 EAR source in NWDS, do i have to create 10 DC for 10 EJB and then 10 DC for 10 EAR?
    please guide me how to work in using NWDS with DC and DTR for CMS.
    i just want to use NWDS with JDI in order to manage source
    thanks
    venjamin

    hi,
    you mean it's better moving my EJBs i created into one DC?
    i can not move my EJB in NWDS to new one DC
    how can i do that?
    actually i developed 30 EJB in using NWDS without CMS, i have deployed those ejb to SDM via NWDS directly but now i am tring to use DTR in CMS.
    so using DTR, do i have to <b>develope in DC</b> for developing EJB?  or develope EJB without DC and then can i move it into DC? is it right concept?
    please drop me on right direction
    thanks
    venjamin

  • Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Is there a way of using IE7 with Mountain Lion? There used to be this facility using Safari "Develop" with Lion, but this doesn't seem to work with ML

    Thank you for this, and to Caleb.
    I've tried using Caleb's approach (which is the same as I used with Lion), but the programme doesn't respond now that I have installed Mountain Lion.
    My problem is that I do not want to use IE7 but that a programme I need regular access to will only allow IE7 and I've been told by the developers that it is too expensive to upgrade this programme to allow it to be used by other browsers.
    So, my puzzle remains the same. I could access IE7 and use the programme using Caleb's solution with Lion. I can't do the same with Mountain Lion. I do (I think!) understand your point about the programme requiring IE7 specifically, but if it worked on Lion, why isn't it working on Mountain Lion? Or was I just lucky before?
    I'll try mende1's approach, though I doubt I'm technical enough to virtualise anything!
    Thanks again. Any further thoughts welcome.

  • There any way to re-sign the app developed with Adobe DPS?

    Hi Everyone , I explain a problem that I have with DPS Single Edition ( it useful that is until May ) to see if anyone knows a solution. I have developed an app for a client , but the client wants to publish the app in Apple Developer with your name . How to export the .ipa or .zip Dps asks certificates Apple account and logically put mine ... (customer is a large company and I do not give me your passwords Apple etc ) you know if there any way they can re-sign the app ? As you do when you develop an app for a client who wants to publish on their own?

    Ok they'll ask my client to send me those files.
    With notifications no problem because the app does not.
    With respect to  Itunes connect and publication in the AppStore, will my client who is responsible for publishing the app, complete data etc. from their own.
    Your help has been very helpful to me. 

  • Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

    I hate to beat this to death but I was unable to find a
    clear answer to this question.  Does NI provide Excel control from within
    Visual C++ 6.0? 
    I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
    Thread : "Re: Benifits of using measurment
    studio for VC++ 6.0?"
    NI REP : drohacek
    Quote  : "we made the decision to support Visual
    C++ 6.0 users only through the ANSI-C interface and not through the Measurement
    Studio MFC-based class libraries."
    If there is a suggested way of controlling Excel from within Measurement Studio
    for Visual C++ 6.0 then I’d love to know it. 
    If not, can a plain statement be made basically stating that if you want
    to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
    Studio support?
    With .NET of course you can just decide to have Excel support added during
    project creation.  CVI can act as an ActiveX server and easily control
    Excel just by building off the examples shipped with CVI.  I see that
    there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
    for taking existing CVI projects and converting them to Visual C++ 6.0 projects
    or for calling CVI libraries from a .dll from within Visual C++ 6.0.  I suppose I could do the work
    in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
    how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
    What I'm really after here is a visual graph control like the one in CVI that I
    can use from Visual C++ 6.0.  I purchased a 3rd party graph control for use
    in VC++ 6.0 that works well but isn't really visual.  I mean you can't
    enter any values in it until you run the program and fill it out programmatically. 
    Then you can see which columns are two narrow, quit the program, adjust the
    column width of your now empty control, and repeat, until you get the thing
    looking the way you want.  If I could call into Excel from within Visual
    C++ 6.0  the way I do from within .NET
    then I could use Excel to hold the table and just read in the values into my table
    control at run time.  Basically I'd use Excel as a visual development tool
    for all my tables.
    I do all my coding from within CVI and Measurement Studio for Visual C++
    6.0.  I'd use CVI for everything if I didn't depend so heavily on certain
    outside controlled C++ .dll's.  Could you please suggest then what I can
    do to get Excel support for Visual C++ 6.0?
    Last question :
    Is there any plan to ever have a NI table control like the CVI table control for
    use in Visual Studio?  One that you can
    completely set up before you do any compiling? 
    I imagine that the way Microsoft sets up their environment makes this idea impossible.  Otherwise someone would
    have come up with a truly “visual” table control before now.
    Thanks,
    Grant
    Grant M. Johnson
    Project Engineer
    LECO Corporation

    Hello Grant
    You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
    You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
    Here is one that talks about VC 6.0 and Excel.
    Here is a code project article about this.
    Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
    See this document for more information about the Excel object model.
    I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
    One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
    Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
    Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
    Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
    We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already  provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
    On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
    To summarize
    - Yes, you can use Excel with Vc++ 6.0 without mstudio.
    - Try using the Datagrid Activex control if you just need a table.
    - Measurement Studio provides high-level excel and word classes for VC++ 6.0
    - Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
    - Measuremnt Studio does not have a table control.
    - VC++ 6.0 is really really old. Have you considered upgrading?
    Bilal Durrani
    NI

  • Issue in using BIAccelerator with Business Objects WebIntelligence report

    Hi,
    I am trying to improve performance of Webi Reports on BW queries (with huge data load) with BI Accelerator.
    When I run one BW query (with millions of records) in Bex 7, am getting data within no time when I used BIA.
    When I run Webi report on universe which is developed on same BW query, report is running for long hours and finally giving message "No data to return Query1".
    Am not sure whether my report query is hitting BIA from WebI or not .
    Can we use BIA with WebI reports or not (to increase performance)?
    Any help on this please.
    Thanks,
    Dhana.

    Hi Dhana,
    Webi - like any tool that is based on BEx queries - will use BIA. However, for Webi the data has to be passed through the MDX interface which slows things down. Please make sure you apply all notes listed in SAP note <a href="http://service.sap.com/sap/support/notes/1142664">1142664 MDX: Composite SAP note about performance improvements</a>.
    Regards,
    Marc
    SAP NetWeaver RIG

  • Problems Using Viber with new iPhone 4S

    When I try and use VIber with my new iPhone is says push notifications are not enabled, even though I've enabled them. I've also tried deleting and reinstalling viber several times, along with restarting the phone. Is anyone else having the same problem and does anyone have any suggestions of something else I could do?

    Hi,
    This is a member of Viber's development team.
    @libbyfromchristchurch - Please check: http://helpme.viber.com/index.php?/Knowledgebase/Article/View/38/0/push-notifica tions-for-iphone---how-to-enable
    @quyenfromseattle - This is a known issue which will be resolved shortly. Make sure that you stay current with our version updates.
    It may help to change 'banners' to 'alerts' on Viber's Push Notification settings as a temporary workaround.
    Thank you for your patience!

  • How to use BC4J with JDeveloper 9i in a Team

    Hello
    I'm not sure if I'm to stupid, but to say the truth I didn't found the clue how to share a BC4J Application between several develeopers. Maybe someone can give me a hint.
    That's my situation:
    Our team is going to develop a web application using BC4J and BC4J-JSP, nothing special I think.
    But my problem is, that BC4J and especially the wizards refer to a lot of different files. Even simple changes often result in multiple files being changed in different parts of the project.
    Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.
    So it is not easy to find parts of code from which I can say they are owned by one developer and others which are owned by another. Most often, if you have to merge the work of different developers, you have to edit the BC4J-XML-Files using an external editor. Or did someone find a better way? Please tell me!
    So, what is the best way to share code between developers?
    Should I partition the application by packages?
    - advantage:
    it allows a fine partitioning
    - disadvantages:
    it has the great danger that BC4J makes changes in other packages which will be overseen when merging.
    Should I create a projects for each developer and distribute code between the projects using libraries?
    - advantage: no unseen changes will happen, as the libraries are readonly.
    - disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.
    Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.
    So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.
    Thanks in advance
    Frank Brandstetter

    Hi,
    I'm not sure whether my answer is good enough for you, but it might help.
    First of all, you have to use JDev 9.0.3, because 9.0.2 has big problems with associations/view links between objects in different projects.
    Creating a view link between view objects in two packages for example changes the view objects in both packages. Also the project (.jpr) file or several "BC4J.xcfg" files are changed very often.This is not completely true in 9.0.3, as you may choose not to create an accessor in the imported object (and usually you don't need it neither!). As for bc4j.xcfg, there is a trick: define a "standard" database connection name to use all over your project! This will prevent modifying these files all the time!
    Should I create a projects for each developer and distribute code between the projects using libraries?
    - advantage: no unseen changes will happen, as the libraries are readonly.
    - disadvantages: no view links between view objects in different projects (Libraries) are possible! Also a lot of "load errors" can occure when updating a library, which have to be manually corrected in the dependent projects.I would say, projects for each application component, which by chance will be managed by a single developer at a time.
    As for the disadvantages, in 9.0.3 you are able to properly create associations and links using read-only objects. Hopefully, the release version will solve some generation inconsistencies...
    Concerning the errors that occur when modifying a library, this might be balanced by the relative independence of the components... If you are able to develop following the dependency tree, you will not meet the problem very often.
    Are source code management systems a real help in this problem or do they just "manage" the problem? I already tried SCM and PVCS but was not very happy with the way of working. As JDeveloper is not "really easy" to use with theese tools.Indeed, I do not have a SCMS really able to manage merges in the BC4J XML files... We rather try not to arrive there!
    So I would like to get any hints how other developers are dealing with this problem. Are you using BC4J with JDeveloper 9i in a team? Please tell me how do it and how you have partitioned your application.I really hope that my hints will help.
    Regards,
    Adrian

  • How to get all tables in oracle sql developer with MS SQLServer

    Hi All,
    I am using microsoft SQL server 2000. For displaying the tables and other stuff i am using oracle SQL developer tool. The problem is when i connect to sql developer with oracle database i can see all the tables in that database. But when i connect to MS SQL server database it is not showing all the tables in that database. I don't know why?.
    i tried doing the samething using another tool called Aqua Data Studio , there i can able to see all the tables in microsoft SQL server 2000.
    do you have any knowledge regarding this, why i am not getting all the tables in oracle sql developer when i connect to microsoft SQL server 2000.

    Same issue here. Haven't found the answer yet..

  • Where can I find a good tutorial for mobile game developement with J2ME ?

    Hi All,
    I'm completely new to J2ME programming. But I have past experience on J2SE developement. Now I would like to know that where can I find a good tutorial for mobile game developement with J2ME ?
    I'll be very greatful if I can find a useful step-by-step tutorial (eg. "The Java Tutorial" for J2SE)
    Please point me ot the direction.
    Thanks
    ZuriJAckshoT

    ibook-widgets.com    have a free tutorial book in the iBooks store.  Search for "Create your first interactive book using iBooks Author"   they also  sell widgets.
    I  dont have any connection - I  found their eBook in the store long ago  and used it to learn more about iBA.
    The best advice though, is be patient,  go back over the process step by step, I cannot  access the Help files for some reason.. but i am sure its in their.

  • How can I run a vi developed with 7 Express?

    How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

    Apparently, you want to run it on a machine that does not have LabVIEW installed.
    To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
    To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
    There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
    ication builder.
    Of course you could also get a second copy of LabVIEW.
    Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
    LabVIEW Champion . Do more with less code and in less time .

  • Saving a PDF or DOC file into Oracle 9i using Developer Forms 10g

    Hi guys,
    I want to save a pdf or doc file into oracle 9i. I am using Developer 10 g. Please help me;
    1. What datatype field should be in database table to store such file.
    2. Which code should I use in Forms 10g to display open file dialog, get the name and save that into database table.
    Thanks in advance

    WEBUTIL is a library used with forms to interact with the client. With Forms10G the library comes shipped with the developer suite, for forms 9i i'm not sure, check the forms-page at otn if there is any download available. For documentation about how to do a file-upload, simply search the forum, there are lots of examples.

  • Error while using RSCRM_BAPI with remote cubes

    Hi,
       We are getting short dump while trying to use RSCRM_BAPI with hierarchies i.e.display hierarchies to extract data to a flat file.
    We do get a warning that display hierachies are not longer supported in 2004s with RSCRM_BAPI and have been going on and on with SAP development.  They are saying we need to find alternatives.
    I wanted to know if anybody has tried using display hierarchies with RSCRM_BAPI in 2004s if not then I would like to know what are my options in getting a flat hierarchy report on to a flat file? 
    I dont think infospoke supports flat hierarchy extracts as infoproviders dont store hierarchy information.
    Thanks

    Heres my thought -
    to use Bex Broadcaster to download the information,am not sure if RSCRM_BAPI is replaced by new functionality ,might wait for SAP to confirm.
    <b>Key capabilities:-</b>
    1)The right information:Based on BExqueries, views, workbooks, Web applications & enterprise reports
    2)In different formats:HTML, MHTML, PDF, ZIP, printer formats, online links, SAP alerts…
    3)To the right people:e.g., single users, groups, distribution lists, user-specific or role-specific (incl. non-SAP users)
    4)In different channels:e-mail, Portal, BExPortfolio (unified access based on Knowledge Management folders), collaboration rooms, Universal Work List…
    At the right time:event driven, exception driven, ad-hoc, scheduled
    Bex Broadcaster + Information Broadcasting
    Note 760775 - Settings for Information Broadcasting
    Functions of Bex broadcaster
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/220c40ac368f5ce10000000a155106/frameset.htm
    Hope it Helps
    Chetan
    @CP..

  • How to upload to Azure Media Services when using HTML5 with Web API

    I keep finding examples demonstrating how to upload video to Azure Media Services through a console application.  I am developing an application using HTML5 with angularjs and web api, but am having trouble finding an example for uploading when you
    are getting the file from a form on a web browser.  The main issue I find is that I see a way to upload from a file path and no way to upload from a stream.  I would like to upload the file to blob storage and then associate the file in blob storage
    with the IAssetFile object, which is then associated with IAsset.  It this possible and if so can you point me in the direction of some tutorials that demonstrate this?  Also, I am allowing site members to upload videos and images.  For this
    images scenario, I saw doc. demonstrating how to start a job that will save the image into a different size, what if I need four different sizes for each image uploaded?

    Hi,
    the following example shows how to upload a stream into a blob and associate the blob with an asset: https://code.msdn.microsoft.com/How-to-upload-a-stream-to-d2750102.
    thanks,
    Julia
    This posting is provided "AS IS" with no warranties, and confers no rights.

Maybe you are looking for