Using DHCP or PPPoE connection with it affect playing World of Warcraf ???

Hi All ,
At few month ago , i am using PPPoE connection with WRT54G , when playing WOW , it works fine !!
However , I change ISP at this month , the new ISP is DHCP connection , when playing WOW with WRT54G , the lagging is very serious . ( but if I direct plug the cable to the computer , the game work fine....)
And one thing I found is the ping always time out(connecting with WRT54G) , the following is one example
C:\Documents and Settings\K>ping yahoo.com -f -l 1462
Pinging yahoo.com [66.94.234.13] with 1462 bytes of
data:
Request timed out.
Request timed out.
Request timed out.
Reply from 66.94.234.13: bytes=1462 time=172ms TTL=47
Ping statistics for 66.94.234.13:
   Packets: Sent = 4, Received = 1, Lost = 3 (75%
loss),
Approximate round trip times in milli-seconds:
   Minimum = 172ms, Maximum = 172ms, Average = 172ms
And I have done alll the game setting such as MTU , port forward and QoS , but all seems no use ,
Pls help ~~~~  

It sounds as though you may have SBC's DSL. IT sucks. Sorry to say this but it is true. Also, check your wireless settings and make sure the port triggering is set correctly. A dynamic IP should not effect the game. You may also want to change the frequency you are operating on if you are surrounded by other prople with networks. WEP security can slow this process as well. If possible, use WPA or WPA2.
Good luck.

Similar Messages

  • HT4623 How to use epson iprint after connected with iPad help

    How to use epson iprint after connected with iPad help.

    When you open Epson iPrint, you will see the various options of ways to proceed, e.g., Photos (to print photos), Maintenance (for printer maintenance). Scan (to perform scanning).

  • Using a remote desktop connection with the Macbook pro.

    I use the remote desktop connection on the Macbook pro and am unable to exchange info between the mac and the remote connetion windows. For example, if I am writing an email from the remote connection and want to attach a document, photo etc. that I created on the Mac, it just doesn't work. It seems like the Mac and the desktop connection are completely seperated eventhough they are both on the screen in front of me. the systems I use for work are not Apple compatible and will not work on anything other than windows explorer and in my case the remote desk top connection. Any ideas!

    Welcome to Apple Discussions
    Try running in 'ClamShell' mode (MacBook Pro lid closed and using an external keyboard and mouse) with the Gateway connected and then run System Preferences/Displays, it should show then ...
    My 1920x1080 monitor shows the following:

  • Using thread and socket connection with other machines

    Hi all!
    we are using weblgoic 5.1 SP9 JDK1.2.2
    we already using java.net.Socket and java.lang.Thread
    to communication TANDEM Machine on the weblogic.
    the reason why we use to socket and thread even though it is not
    recommanded is that below
    1. once we connect Socket, then we using until server shutdown or
    connection may has the problem, so we're using thread to wait
    java.io.Inputstream to read from socket.(if I using EJB, It can't
    wait socket inputstream indefinetly, because it has timeout)
    2. we're logging Database date sent or received with TANDEM Machine.
    so we need Database Access. so we using Database Access
    thru Weblogic.
    3. EJB Application using (other EJB Application - send Module)
    to send data to TANDEM Machine. So "Send Module" should
    be implemented EJB.
    but. Now I see there might be problem this framework.
    so, is there some way by just using J2EE spec, to implement this kind of
    framework.
    wait for your great help !!
    regards.

    Yes i've tried interrupt method and it doesn't have any effects on the thread... it stay in connect() method...
    And for the timeouts, in fact i use an API : J2SSH, to connect with SSH protocol, and the setting of connection timeouts is not implemented yet... and the default timeout is about 4 minutes...
    so i don't know how to solve this problem...

  • How can I use oracle 9i to connect with my jsp

    Hi,
    I have a question with my a little final year project. I have been install oracle 9i on Win2000. I also install apache and tomcat on Win98 and it works properly. I am trying to use jsp to develop my homepage and it can be connect with my oracle to retreive information. I'm wondering what steps/configure I need to do?
    Could anyone tell me about this? Thanks
    Amy

    Amy,
    You can look at [url http://otn.oracle.com/sample_code/tech/java/jsps/ojsp/dbaccessjdbc.html]this sample. It provides step by step explanation on how to connect to database using JDBC from a JSP. We use Java Beans in the sample. Download the code and have a look at it.
    Hope this helps.
    Regards,
    Anupama
    [url http://otn.oracle.com/sample_code/]OTN Sample Code

  • Using a dongle and connecting with an Xbox 360...

    Hi guys,
    Quick question, i've moved into my new uni place but it hasn't got any internet. So im looking at getting a dongle but I still want to hook up my xbox to xbox live. Is there a way of feeding the internet through my imac (which is using the dongle) to the xbox. If its any help i do have the extra wireless box for the xbox and also an either-net cable.
    Thanks!

    You X-Box can connect to the internet thru the Mac using either wifi or ethernet, whichever works best for you.
    If you want Ethernet, connect a cable between them
    If you want wifi, you need to first create a network.
    System prefs -> Network.
    Select Airport then click on Network name: and select *Create network...*.
    Give it a name, tick require password.
    Now go System prefs -> Sharing.
    Click on *Internet Sharing*.
    Set *Share your connection from:* and select the dongle (likely showing up as USB).
    If you connect them using Ethernet, set *To computers using:* and select Ethernet.
    If you connect them using wifi, set *To computers using:* and select Wifi.
    You will need to enable wifi on the X-Box and connect with the password you set above.

  • My Mac Mini client cannot find or connect with the server on my 4 station network.  I am able to connect with the server using the same ethernet connection with another Mac.  Any suggestions?

    I am using DHCP/automatic running OS 10.4.11.  I upgraded to 10.5 but this did not help.

    Ping has started ...
    PING 192.168.1.1 (192.168.1.1): 56 data bytes
    64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=1.158 ms
    64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.941 ms
    64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.911 ms
    64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=0.924 ms
    64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=0.995 ms
    64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=0.971 ms
    64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=0.964 ms
    64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=0.937 ms
    64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=0.894 ms
    64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=0.874 ms
    --- 192.168.1.1 ping statistics ---
    10 packets transmitted, 10 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 0.874/0.957/1.158/0.075 ms

  • I can't use Scan when i connect with Air Extreme..

    I can't Scan when i connect with Air Extreme for a long time..
    even the drivers is the newest..
    that my printer (HP C4200 - ALL IN ONE)
    please help me~~
    thank you all !!!

    BassOD, Welcome to the discussion area!
    Sorry but the USB port on the AirPort Extreme base station (AEBS) supports printing ONLY. It does not support scanning.

  • PC version of MX on iMac using Parallels can't connect with server - HELP!!!

    I can connect via Filezilla with no problem, and during the site setup process the TEST SETTINGS says it can connect with my remote server.  But when I attempt to actually connect, it finds the server but cannot seem to establish a connection.  SOMEONE PLEASE HELP!!!!  My settings are all verified from a Windows PC and via Filezilla.....

    Thanks for responding so quickly!  Yes, the internet does work through Parallels.  When atempting to log in to the remote server, it finds the host, but then hangs up during the connect phase.  However when I set up the site, and test the settings it says it can connect with no probem...

  • How to share a PPPoE connection with a hub?

    Hello here,
    I have the following configuration:
    1. PowerMac with MacOS Tiger (latest update)
    2. PPPoE internet connection
    3. A simple 8 ports ethernet hub
    My question is: is it possible to share the Internet connection to the other ports in the hub by making the Mac as a router? I remember I was able to do it with MacOS 9 in the past (with a shareware program)!
    Any idea is very welcome. Thank you in advance.
    Sincerely,

    It is possible and rather easy... BUT you either need a mac with two network ports... one to connect to your DSL modem and one to the hub or you need to connect the DSL modem over USB and the use the other network port to connect to the hub.
    An easy and cheap solution would be to buy a cheap router (you can get them under 50$) and it has normaly a nice and easy web interface to control firewall etc build in. Easier then handling all of the different parts in OS X.

  • Can't connect to internet using my airport, PPPoE connection. Any suggestions?

    I am trying to use my airport express as a wireless router. My internet connection is a PPPoE one.
    Any suggestions?

    Is it really? In the apple web page it says it´s a router that you could use for an apartment network, up to 10 users. That´s actually my case. It´s still an old one that I haven´t used for almost 3 years. Bought it in 2006.

  • How IPAD use the Printer which connected with the Time Capsule

    I connnected a printer to time capsule. And I can use the printer in Windows. But I can't use it on IPAD and IPHONE.
    So are there any solutions?

    iOS devices can only print directly to AirPrint printers. Wireless printers or printers connected to a Time Capsule are not necessarily AirPrint capable.
    To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
    You can also buy this standalone print server:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html
    The xPrintServer Home Edition will support a directly connected USB printer. The Network Edition will support any network printer.
    These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
    Otherwise you will need to buy an AirPrint printer or multifunction device.

  • I am having trouble using Facetime. When connecting with known users the connection drops out just as the other person accepts my call

    I am having trouble with Facetime. On answering my call by another party the connection immediately fails

    Hello alancc1942,
    The following article provdies some useful troubleshooting steps that can help resolve such issues with FaceTime.
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/TS3367
    Cheers,
    Allen

  • After upgrading iPhone 4g to iOS 6 not able to connect to App Store using wireless. Can connect with AT

    I have changed My DNS to Google and Verizon and now get intermittent connections but mostly failure to connect. I believe this is a DNS issue with Apple domain. Have they modified their address registrations?  Why is At&T cellular working but not my wireless that's Verizon ISP?

    I see no need to downgrade or restore to factory defaults. It is only spefcific to one wifi network - my work. The one at home works fine. I am wondering if the problem has something to do with iOS 6 not liking the router, or the password, etc. Upgrades shouldn't downgrade functionality - why should I have to use the now inferior OS to maintain wifi functionality - that's ridculous. Does anyone from Apple monitor these forums? It would be nice to get an answer from the source of the issue - which is clearly Apple's new OS because everything was working fine before I upgraded to iOS 6 yesterday.

  • Use of Spatial in connection with ODP

    I can't find anything about this subject. Is it possible to retrieve and update spacial geometry data using ODP?

    Can you possibly post some sample code demonstrating a spatial query? Some of the developers in my group have not had any luck with getting spatial queries to work. I've also seen some postings on this forum about ODP.NET not supporting the necessary data types for spatial queries. I'd prefer to use ODP.NET but without spatial queries I can't.
    Thanks.

Maybe you are looking for

  • IPhoto or Photoshop Elements?

    I recently purchased a nice scanner (Epson V500) and in the package got a copy of Photoshop Elements. May be committing a faux pas here, but I'd be interested if anyone had opinions about using one or the other, or both. Thanks, Eric Weir Message was

  • Hi problem with Oracle 10g On windows 2003 SR1

    Hi,    I am installing NW2004S on windows 2003 SR1 (Std.Edition). After the installation of Oracle 10g I am getting the error "I*SQLPlus service" can't be started. Any help on this regard is greatly appreciated. Regards, Rao.M

  • How do i delete an App for re-installing

    Hi all, i have a few App's that are for editing images, i wanted to use one of them yesterday, the first two i tried to open both came up with the same message, the message was telling me i had purchased it on another computer and i should sign in us

  • Only part of a song downloaded - how do I recover the rest or reset the entire track

    I purchased a track and only part downloaded yet download indicated  'done' - how do I recover rest of the track?

  • HT1819 Audio Podcast episodes no longer playable/downloadable.

    I produce an audio podcast through Hipcast and submission to itunes has been successful. Cut to a month and a half later and the episodes have all retroactively stopped working. Episodes are no longer downloadable or playable. What can I do?