Using different SMTP port for external user registration

Hi,
I need to configure a different SMTP port rather than the default port 25 for sending all external user registation invites, reset password, etc... Would it possible to configure that? I am using Adobe Policy Server 7.0.2.
Thanks.
Regards,
Prem.

Hola,
Ok a small 'enhancement' to  CL_HRRCF_ADDRESS_SERVICE->IS_EMAIL_UNIQUE has done the trick. Not exactly a best practice but will get me through this testing. NO this will not be going to production. This is strictly a test.
Cheers!

Similar Messages

  • Can't use front USB port for external Hard Drive

    I have had some problems for about the past year with the front USB port on my 2009 13in Macbook Pro 5.5.
    As you know, there are 2 USB ports on the left side on a 13inch Macbook pro.  The one closest to me (the front one) works fine when I use it with a flash drive.  But when I connect my external 7200RPM external drive to it, after about a minute, it ejects then re-recognizes the disk. 
    I video edit with FCP and use the external as one of my scratch disks. 
    At first I thought maybe it was the cord or the drive that was messed up.  But then I connected my other external drive to this port and the same thing happened.
    But when I connected it to the back USB port, everything works fine. I haven't had any trouble.  So i make sure it's connected to that port when using the external.
    Why would this be happening.  It only screws up when using a standard external drive but not flash drives or any other peripherals.
    Thanks
    Brandon

    Exactly what Ogelthorpe mentioned.
    I bought a Seagate 500GB 7200RPM and bought an external case from Staples that has a big fancy led to show HD activity.  Sometimes it works and sometimes it doesn't.
    Tested it on my PC and it works all the time so it got me stumped.  Thought it was my MB.
    Decided to try another external drive drive on my MB and everything works.  So I returned the fancy external enclosure and bought the simple $10 one.
    Now everything works fine.
    Maybe changing your external case might help you.

  • How to use different xsl's for user first time logon in OAM

    Hi,
    We have a requirement to use different stylesheets (xsls) for employees and customers in OAM. How we can configure different XSLs for user first time logon to OAM (i.e for change password and configuring challenge and responses).
    Any pointers on this is appreciated.
    Thanks in advance..
    Srikanth

    XSLs displayed are controlled by the StyleCookie. So if you can set the value of this cookie to be different front customers and employees, they will see different styles.
    You can do this in various locations -> from the web server, from the url, custom plugins, etc....
    -Raj

  • Lync 2013 - Address Book Synchronization Issues for External Users

    I recently deployed Lync Server 2013 in my organization. Everything works fine except for the address book synchronizing issues and the mobility access. I would really appreciate if someone could share their knowledge as I have done lot of troubleshooting,
    not sure if I have missed something. Please note my setup below for the External Web Services.
    Lync Front End:
    Listening: 8080 4443
    Published: 80 443
    I have published my External Web Services URL and the following ports are open: 4443, 443, 8080
    When I look at the Lync Client Configuration, ABS Server External URL is pointing to https://lyncexternalweb.domain.com:443/abs/handler. However, GAL Status is still pointing to my internal Front End FQDN: https://internal.domain.com:443/abs/handler.  
    For machines that are joined to the domain, the address books synchronizes with no issues. For machines that are not joined to the domain and for external users, GALContacts and GALContacts.DB files are not event generated for the users profiles. 

    Hi Anthony,
    Please note the findings below:
    1. I was checking the Lync Client configuration on one of the PC that is not joined to the domain, still on the domain network via site to site VPN connection. I noticed that the Connected Lync Server varies: sipinternal.domain.com, sipexternal.domain.com,
    lync.domain.com (Pointing to the Edge Server IP).  
    2. Edge Server External Settings: Single IP address with the FQDN set to lync.domain.com for all 3 services and the following ports configured. Access Edge Service: 5061, Web Conferencing Edge Service: 444, A/V Edge Service: 443 with NAT enabled public
    IPv4 address. I have checked the replication status between the Front End and Edge Server, it is up to date.
    3. In regard to the https://lyncdiscover.domain.com, I don't have the lyncdiscover.domain.com published, but it is pointing to the NAT enabled public IPv4 address which is assigned for A/V Edge Services.
    4. For the port forwarding, I am using the Cisco Meraki router. 
    Please advise if there are there is something that I am missing.
    Thanks!

  • Excel Services Connectivity on Sharepoint 2013 for external user

    Currently , external user is able to refresh the data on sharepoint site through browser. the data connection is pointing the one of the external data source. But how can an external user (Internet user which accessing sharepoint through internet) download
    a copy of excel in sharepoint library and open the excel workbook with data refresh ability at client machine ?
    Do we need client machine to be able to access / ping the external data source? 
    Thanks.

    Thanks for the response.
    They want to perform data analysis and design their own report with own template , for example : to remove subtotal from the powerpivot tables which we cannot change the formatting at the excel services at browser level.
    So if i understand correctly, we need to get the client machine to be able to access to the database server directly to get the access to the cube for data analysis although we had this odc file connection setup, am i right?
    For internal user, network team should open port / access for them to access database server directly.
    For external user, either to open public access to the database server directly or setup a VPN connection for the external user to access the database server in their secure network.
    Let me know if i understand this correctly.
    Thanks.

  • How do I use the same profile for two users on the same computer

    I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

    Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • Access to my Office 365 third-party app for external user : "a User account is not registered for the account"

    In my third-party web application of Office 365, I want to have access to the contacts, events and emails of all the users from the organizations who installed my app. The thing is I don't want that all these users have to grant me access, I just want one
    admin of the org to grant access for my app and then be able to retrieve the data I need for all the users.
    To test for one organization, I logged in as the admin and proceed to the Oauth2 authentication to retrieve the access token and in the first request (the GET one to retrieve an authorization code) i add the parameter
    prompt=admin_consent.
    With this access token, I can access the data (emails, contact, event) of the admin
    for instance for the contacts
    uri: https://outlook.office365.com/ews/odata/Users(adminemail)/Contacts
    but not the data of the other users of this org with this uri
    uri: https://outlook.office365.com/ews/odata/Users(useremail)/Contacts
    The only thing I can do is retrieve an access token for each user but it supposed that each user has to authorize the access to the app but it's very cumbersome. So, i don't see what enables the parameter prompt=admin_consent and how to use it. Does anybody
    know what it does?
    And my question is: how can I do to access the data of all the users of one organization when the access has been granted by one admin?
    Thank you!

        
    This was answered on StackOverflow by Dushyant Gill.  http://stackoverflow.com/questions/25316175/access-to-my-office-365-third-party-app-for-external-user-a-user-account-is-n/25316678#25316678
    You are sending the OAuth request to a tenant specific endpoint of Azure AD. Note the {key_provided} part of your Url - that part represents the tenantid or a registered domain name of an Azure AD tenant. Azure AD throws this error is the user signing in
    is not a user in that tenant.
    Multi-tenant applications like yours have two options:
    Perform home realm discovery yourself and send the SSO request to the correct tenant-specific endpoint of Azure AD: when a new Azure AD organization signs-up for your application, record its tenant ID, and registered domain names. On your login page, ask
    the user for their email and try to discover what Org they belong to using the suffix the email.
    Use the common endpoint of Azure AD. Instead of the {key_provided} part of the URL, use 'common'. In this case Azure AD will determine the user's tenant and sign-in the user. The token that your application will receive will still be from the user's tenant
    (iss claim).
    2 is more convenient for apps. However #1 has an advantage when the user's Organization has customized their sign-in page with the company logo etc - in the case of #1 the user will directly be taken to the customized and familiar sign-in page.
    I recommend a combination of the two: try determining the user's organization and sending them to the tenant specific SSO endpoint. If you're not able to - send them to the common endpoint.

  • How to secure BSP applications for external users on the internet?

    I posted this question under Enterprise Portal forum but got no response. I am hoping some of you experts in this area can help.
    We have developed BSP applications and set them up as iViews in Enterprise Portal 6. Our portal implementation will be used by external users.
    We have security concerns that the access to the BSPs  allows external users direct access to the R/3 system. We were told that we should use ITS application instead of BSP application for external users.
    Do any of you have any insight into how we could work around the security problem with BSP applications, or BSP applications in EP6? Your help will be greatly appreciated.

    In sense they are correct as to whether it is more secure or not would have to be a call by people who are more of an expert than myself.
    But I can see there point the BSP runs directly on the system and uses the system security where as the ITS is basically just an RFC call. However for us we use a 620 server with BSP's and make RFC calls to our R/3 systems thus keeping people of the R/3 directly - however we are not opened to the Internet.
    If your message is answered please remember to mark it solved so others searching in the future can find the solved ones quicker - just click on the yellow star.

  • ITUNES - Are there disadvantages to using different Apple IDs for inistalling the .app?

    ITUNES - Are there disadvantages to using different Apple IDs for inistalling the .app file not overwrite the previous one at itunes?

    In my opinion it is best to use one Apple ID on your computer and iPad. Using multiple IDs causes confusion.
    I also suggest that each person with their own iOS device have their own unique Apple ID. On the computer create different accounts for each user so that iTunes on each account can be associated with the correct Apple ID.

  • Ports for External Connection

    Hi, i have one problem, i dont know what's ports i need to open in my modem for one user in other network connect in my network. I need to make a NAT for this, but i need to know apple remote port for external connection. And sorry for my english, bad.
    thank's.

    You need to open TCP and UDP port 3283 and, for ARD 2.0 and later, TCP and UDP port 5900. For encrypted file transfer (ARD 3.x), open TCP port 22. You may also need to open TCP (and perhaps UDP) 5988 and 5989, though it's not clear under what circumstances this will be necessary.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • Outlook Anywhere proxy changed from Basic to NTLM for external users

    I have a Exchange 2013 environment that is also running Exchange 2010 coexistence (migrating). What is happening is autodiscover is handing out NTLM for the proxy settings and not basic. However when it is using NTLM we seem to get the password prompt over
    and over. If I manually changed it to Basic then it works fine, but when autodiscover goes again it changes back to NTLM and prompts that the Administrator made a change and you need to restart Outlook.
    I checked Outlook Anywhere and all my servers have Basic set for external users and NTLM set for internal.
    I only have a few mailboxes on 2013 and 2010 mailboxes seem not to have a problem.
    Here is an output for Outlook Anywhere on all six servers:
    Identity                           : CAS01\Rpc (Default Web Site)
    ExchangeVersion                    : 0.10 (14.0.100.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm}
    Identity                           : CAS02\Rpc (Default Web Site)
    ExchangeVersion                    : 0.10 (14.0.100.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm}
    Identity                           : CAS03\Rpc (Default Web Site)
    ExchangeVersion                    : 0.10 (14.0.100.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm}
    Identity                           : EXCH2K13-01\Rpc (Default Web Site)
    ExchangeVersion                    : 0.20 (15.0.0.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    Identity                           : EXCH2K13-02\Rpc (Default Web Site)
    ExchangeVersion                    : 0.20 (15.0.0.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    Identity                           : EXCH2K13-03\Rpc (Default Web Site)
    ExchangeVersion                    : 0.20 (15.0.0.0)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}

    Hi,
    Please refer to the following KB to set the Outlook Anywhere settings on Exchange Server 2013 Client Access servers:
    http://support.microsoft.com/en-us/kb/2834139
    If it doesn’t work with the resolution above, please do the following checking in ADSI Edit:
    1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
    2. Right-click the listed database > Properties.
    3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
    4. Click OK.
    Then check whether the issue persists.
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • Why we use different clearing account for GR/IR and planned cost clearing a

    My client ask for using same account for GR/IR account and all planned cost clearing account.
    i try to convince it should be different accounts but he needs a logical answer.
    Why we use different clearing account for GR/IR and planned cost clearing accounts?

    Dear friend.
    u just tell him while doing GR it will debited n  while doing IR it should get credited.hence we  need to take diff G/L account or same account.
    regds
    nasir

  • Can I use one itunes account for multiple users and multiple devices

    Can I use one itunes account for multiple users and multiple devices?

    The iTunes EULA, as I understand it (I'm not an attorney )for Apps is basically that one person can use an App multiple devices, or multiple people can use an App one device..so one to many or many to one, but not many to many....

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

    Hi mshields1162,
    Great question, and welcome to Apple Support Communities.
    First, you may want to choose to have the sidebar displayed for familiarity:
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649
    Afterwards, your device should be displayed if connected:
    We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
    Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
    iTunes 10: Sync to your iPod
    http://support.apple.com/kb/VI72
    Thanks,
    Matt M.

Maybe you are looking for