Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Similar Messages

APs using different channels for the same SSID

Hi,
This might be a stupid question, but I am wondering why my Aironet 1602i and 2602i access points connected to the same controller would use different channels for the same network. Would this be to avoid interference? If so, I am planning to put 9 access points throughout the office and they will be fairly close to each other. Would this increase the risk of interference?
Thanks,
Tibet

That is normal. The WLC is determining the best channel and being in different channels is the best. When you add more, the WLC will decide by the use if RRM what channels and power levels to allocate to each AP.
Sent from Cisco Technical Support iPhone App

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??

If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??
I'm asking because I purchased an app with an id that has been cancelled so I cannot update that particular app. I can purchase the app with my new id but I don't want to do so if its going to erase all the data I have with the previous purchase...

Figured it out. Thanks.

JTextArea-Using different colors for the Strings added

I'm looking for a way to write in a textArea using different colors for the Strings

use SetForeground(Color newForegroundColor) on the JTextArea class
good luck
krishna

Schedule parallel activities on different resources for the same period

Hi,
I am trying to create a PPM where I need to define parallel activities on different resources for the same time period.
For example:
Input prod: P1
Output prod: O1
Now I define a dummy activity A1 to define this consumption i.e. 1 PC of P1 gives 1 PC of O1.
Now I have got 3 resources R1, R2, R3.
I define 3 activities A2, A3, A4 for these resources.
Now I have to arrange activities A2, A3, A4 such that they start simultaneouly after activity A1 and also end simultaneouly.
The Fixed duration for all the resources is 1 week.
My requirement is that out of these resources system should plan for demand considering the resource with minimum capacity
i.e. kind of bottleneck resource.
I am using CTM engine for planning.
I have defined A1 as predecessor for all the 3 activities A2, A3, A4 and after completion all the activities have a dummy successor activity S.
But this setting is not working and PPM is not getting exploded, If I use a normal linear relationship between activities it works fine but my requirement is not getting satisfied.
Can anyone please help me in this case or suggest some alternate method.
Thanks & Regards,
Sanjog Mishrikotkar

Hi,
You cannot use the old solman key as systems are on different server.
I think you have to delete the old Dev system and then generate new solman key.
Thanks
Sunny

[JAXB] Several different prefixes for the same namespace

Hi!
I have generated some code from 2 schemas using JAXB. One of them (the main) defines some elements and the other one defines values for those elements. Then, when runring my code, I get an XML document with elements from the main schema an elements from the other one. However, elements from the second schema are qualified with different names. That is:
<party>
<ns3:uid xmlns:ns3="http:/schema1.com/schema1">CN=User1 - RSA/RSA,OU=IAIK,O=TU Graz,C=AT</ns3:uid>
<ns4:role xmlns:ns4="http:/schema1.com/schema1">client</ns4:role>
</party>
As you can see, I get two different prefixes for the same namespace.
Could you be so kind as to tell me if there is a way of getting only one prefix for each namespace, please? Do I have to modify JAXB compiler's properties???
Thanks a lot in advance.

No, I don't know how to do that. I also don't think it should matter. Are these multiple prefixes causing you any problems other than offending against Occam's Razor?

Can we get a output in different languages for the same configuration

Hi All,
Can we get a output in different languages for the same configuration done in NACE. or it is language specific.
They have symbols which have values both in german and english. But when we run the transaction we are getting the output only in german language.We want the out put in english
language.
Thanks in Advance.
Rajesh

A Smartform can be maintained in many languages other than the language that it is created. Translations for the texts have to be maintained for this purpose.
To maintain the translations:
Go to transaction SE63 in R/3.
Go to menu Translation->R/3 Enterprise->Other Long Texts
Select the object type in the pop up. Smartform(SSF) object type is found under Forms and Styles(FS).
Enter the name of the Smart form and choose the source and target language. This would open a screen with the Smartform code in Source language on the top and an editor with the same code in the bottom.
Find the text for which you need to maintain the translation and insert the translation in that place. As usual after required texts are maintained Save and Activate.
To see the translated Smartform create an output type and assign the smartform and the driver program to this output type. In the transaction that sends output to this smartform, select the output type and select the language in which the smartform has to be displayed (translations have to be maintained in this lanuage).This will give the smartform in the required language.
Madhavi

Java-puzzlers...Why 2 different outputs for the same line

Here, why it is giving 2 different outputs for the same set of lines
Line-1 and Line-2 are both same.But giving 2 different results ???
/*java-puzzlers*/
public class Elementary {
    public static void main(String[] args) {
         System.out.println(12345 + 5432l); /*Line-1: Original statement- didn't modify*/
      System.out.println(12345 + 54321); /*Line-2: I wrote - I delete 12345 + 54321 and wrote the same thing again*/
}

kjshikal wrote:
one of them is a longkjshikal,
For the third and final time. Please stop resurrecting old threads like this.
Thank you for your co-operation.

Different authorizations on different cubes for the same characteristic

Hello,
Is it possible to implement different authorizations on different groups for the cubes characteristic?
For example a user should be authorized to see just the data of company code 101 on Cube A but he should see the data of all company codes on Cube B (Cube B also contains the company code. ":"-Authorization is not an option)?
In transaction RSECADMIN it is possible to insert the "special characteristics" Acitivty, InfoProvider and Validity into an authorization. But standard setting for InfoProvider is * and I get an error message if I want to modify for just 1 Cube because the characteristic "InfoProvider" (SAP Content) isn't marked as authorization relevant.
Can you please answer:
1) If it is possible to implement different authorizations on different cubes for the same characteristic?
2) What is the function of the special charactristics if I can't maintain the values?
Thank you
Johannes

Hi there,
Yes it is possible.
The new authorization concept created union also based on InfoProvider Characteristic.
You have to change in rsd1 transaction the characteristics 0TCAACTVT, 0TCAKYFNM, 0TCAIPROV and 0TCAVALID to be authorization relevant.
So you can do this:
Create two authorizations in rsecadmin like this:
Aut_1:
0comp_code: 101
0TCAACTVT: 03 (activity of display)
0TCAKYFNM: * (all key figures)
0TCAIPROV: Cube A
0TCAVALID: * (authorization valid for ever)
Aut_2:
0comp_code: *
0TCAACTVT: 03 (activity of display)
0TCAKYFNM: * (all key figures)
0TCAIPROV: Cube B
0TCAVALID: * (authorization valid for ever)
Now in rsecadmin give both authorizations aut_1 and aut_2 for the user.
If the user opens a query built on cube a he will be having authorizations only for company code 101. If the user opens a query for cube B he will be having authorizations for all the company codes.
Diogo.

Invoice posting with different currency for the same PO

Hi,
Can we post the the Invoice with different currencies for the same PO.
For example.
PO has Qty 100 pcs. amount 100 USD
GR Qty 100 pcs.
Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
Any sugggestions pls.
Thanks,
Satya

Hello
As per my knowledge, that is not possible.
And in whjat scenario, we need to do that?
In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
If you want, you can do MIRO in different currency that what is in PO.
In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
Hope this helps
Regards

Can it be possible to use SUM twice for the same internal table

Hi Guru,
my requirement is follewing.
I need to use a SUM for the same internal twice.
itab.
first : like SUM will sum up all the value
and second like
if wa_tab-field = ' S'
sum.
...some logic
else if wa_tab-field = h
some logic
endif.
can i use SUM in above way.
Many thanks,
Anuj.

Hi,
yes it could be use multiple time.
Here example.
sort GT_COLLECTHI by atnam ATWRT.
loop at GT_COLLECTHI into gs_collecth.
    at end of ATWRT.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
    at end of ATNAM.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
endloop.
Thank you
Jan

Outlook-2 different entries for the same person (but not the same email)

i was asked to switch from outlook 2007 to outlook 2013 as a trial.
For some reason, I get two different entries for the same person (but not the same email), one which is the name as normal and one where the name has ' around it. In the below example:
I have 24 emails sent to Ciaran and then a further 14 sent to 'Ciaran'
The email address for both is exactly the same and it does not seem to matter if I create a new email or reply to an incoming one.
I switched back to Outlook 2007 and the issue is still the same.
any suggestions?

I would say that there is no way to prevent Outlook from doing it, it dependents on how the sender formatted the sending address, not the recipient who replies.
To fix this:
Open the message and double click the address and view source
Just replace the generated Display As with the Display As you want
Thanks,
Ethan Hua CHN
TechNet Community Support

Filter the content on different queries for the same infoprovider and user

Hello,
We are trying to make the following security scenario in BI, and have
problem with the analysis object concept to filter at query level.
The idea is to permit to :
- user A
  - to execute query Q1 and view information about sites 1,2,3
  - to execute query Q2 and view information about sites 4,5,6
but for example for another user :
- user B
  - to execute query Q1 and view information about site 1,3
  - to execute query Q2 and view information about site 5,6,7
Q1 and Q2 are queries from the same infoprovider.
The idea is to make an automatic generation of analysis objects based
on the standard program : RSEC_GENERATE_AUTHORIZATIONS.
During tests, we have faced a problem with the object 0TCTQUERY that we
thought will permit us to filter at the query level, but unless we add
the name on the query on a role in the S_RS_COMP authorization object,
field RSZCOMPID, the query is not granted to the user.
The fact that we use both authorization objects : one for the query
definition, and another for the analysis authorization concept
(S_RS_AUTH, field BIAUTH), has disastrous effect : all values given in
the analysis objects are for all queries of an indicated infoprovider.
With that system, it's then not possible to propose dynamically different
views of the same data (ie from same infoprovider) based on the
authorization concept unless using the technic of customer-exit variable,
but with variable you will have a problem with old queries that doesn't
have a variable and that will permit to see all data given in the new
authorization objects.
Is there exists another object to filter at the query level in the
analysis objects ? If it's not the case, what is possible to do to reach
our goal with the new authorization concept ?
Thank you in advance for your help.
Best regards,
Gaël.

The data is protected on infoprovider level and not on the query level, so when two querys are build from the same Infoprovider then the authorizations are the same,
To achieve what you want to do, the querys must be built off different providers.   This can be achieved by placing the infoprovider in 2 differnt multiproviders and building the querys and authorizations seperatly on these.

Different SDKs for the same game

Hello all, I developed a good amount of games using the Sony Ericsson SDK and they seem to work alright on a couple of 'real' Sony Ericsson phones I tested them on. They all work good with the Sony Ericsson emulators in the SDK.
They don't work at all on my SLVR L6 Motorola phone. Is this because I need to build a different version of the games under the motorola SDK? Should it matter which SDK you build your games under?
Thanks so much for your attention.

Hi
> They don't work at all on my SLVR L6 Motorola phone.
Is this because I need to build a different version
of the games under the motorola SDK? If you target specific phones, then it is ok to use specific API. If you target different types (vendor) of phones, then a more general approuch should be considered. The SE SDK might use different implementation of the specification than Motorola SDK. I saw such differences between SonyEricsson and Siemens. Also, if you use vendor specific classes, then the app will not work on phones from other vendors
> Should it matter which SDK you build your games under?
Yes. I would try using the general midp and cldc implementation and if you need specific functions, then go for a third party library or API, which can be integrated on any vendor specific phone.
Mihai

Using different templates for the desktop and phone versions of the same blog

Similar Messages

Maybe you are looking for