Using Direct input method(LSMW)Can I upload only 3 fields for MM01

Using Direct input method(LSMW)Can I upload only Matnr,mbrsh,mtart fields for MM01.Otherwise I have to give all the mandatory fields.?

Hello TJK,
LSMW will work in the same way as you create normal material master with the transactions, here you are giving the value through flat file and creating material master with program.
You can create only one view with LSMW but you need to give all mandatory field on that particular view, so if you have only these three field as mandatory then yes it is possible, if you have any more field mandatory addition to these fields then it will not work out, during the last step it will throw error saying "maintain the value for field XXX"
Hope this helps.
Regards
Arif Mansuri

Similar Messages

Help me for material master upload by using Direct Input method

Hi All,
Can any one help me out for developing Material Master Upload program by using Direct Input Method where we are also submitting the report to upload the data in SAP Database.

Thanks in Advance!
Ramkumar.K

Hi Kumar,
Thanks! I am using submit statement in my program as well but its populating all the views like Sales Organization Data, Sales - General / Plant Data, Accounting, and all the other views except the Basic Data View.. Eventhough i have populated the corresponding fields of the same.
I am also using structure BGR00, BMM00, BMMH1 to upload the data
Can you please help me on this..

Regards,
Ramkumar.K

Upload sales text for material master using LSMW direct input method

Hello Experts,
I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file
Source Fields
ZLONG_TEXT Source structure for long text
 MATNR C(018) MATNR
 LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
 Select Target Structure /SAPDMC/LTXTH .
/SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
 Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
 OBJECT Texts: Application Object
 Rule : Constant
 Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
 NAME Name
 Source: ZLONG_TEXT-MATNR (MATNR)
 Rule : Transfer (MOVE)
 Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
 ID Text ID
 Rule : Constant
 Code: /SAPDMC/LTXTH-ID = '0001'.
 SPRAS Language Key
 Rule : Constant
 Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
 TEXTFORMAT Tag column
 Rule : Constant
 Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
 TEXTLINE Text Line
 Source: ZLONG_TEXT-LTEXT (LTEXT)
 Rule : Transfer (MOVE)
 Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file
Legacy Data On the PC (Frontend)
 Data D:\Sales_Longtext.txt
Step7 -> Assign File
ZLONG_TEXT Source structure for long text
 Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
Step 10 -> Display converted data
1 /SAPDMC/LTXTH 1MVKE MATERIAL1 0001E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench
Project: ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty.
Please help me with the same.
Regards,
Ranjith N

Hello Experts, I was trying to upload sales text for a material master using LSMW direct input method.
I followed the following steps for the same
Tab dlimited Text file format
MATNR LONGTEXT LINE
MATERIAL1 LONGTEXT FOR MATERIAL MATERIAL1 1 *************************************************************************************************************
Step1 -> Maintain object attributes
Object -> 0001
Method-> 0001
Program name -> /SAPDMC/SAP_LSMW_IMPORT_TEXTS
Program type -> D
Step2 -> Maintain Source Structure
Source structure -> LONG_TEXT Source structure for long text
Step 3-> Maintain souce file Source Fields
ZLONG_TEXT Source structure for long text
MATNR C(018) MATNR
LTEXT C(132) LTEXT
Step 4-> Maintain structure relationship
Structure Relations
/SAPDMC/LTXTH Long Texts: Header <<<< ZLONG_TEXT Source structure for long text
Select Target Structure
/SAPDMC/LTXTH . /SAPDMC/LTXTL Long Texts: Row <<<< ZLONG_TEXT Source structure for long text
Select Target Structure /SAPDMC/LTXTL .
Step 5-> Maintain Field mapping and conversion rules
Here i have assigned constan rules to couple of them like
/SAPDMC/LTXTH Long Texts: Header
Fields
OBJECT Texts: Application Object
 Rule : Constant
 Code: /SAPDMC/LTXTH-OBJECT = 'MVKE'.
NAME Name
 Source: ZLONG_TEXT-MATNR (MATNR)
 Rule : Transfer (MOVE)
 Code: /SAPDMC/LTXTH-NAME = ZLONG_TEXT-MATNR.
ID Text ID
 Rule : Constant
 Code: /SAPDMC/LTXTH-ID = '0001'.
SPRAS Language Key
 Rule : Constant
 Code: /SAPDMC/LTXTH-SPRAS = 'E'.
/SAPDMC/LTXTL Long Texts: Row
Fields
TEXTFORMAT Tag column
 Rule : Constant
 Code: /SAPDMC/LTXTL-TEXTFORMAT = '/'.
TEXTLINE Text Line
 Source: ZLONG_TEXT-LTEXT (LTEXT)
 Rule : Transfer (MOVE)
 Code: /SAPDMC/LTXTL-TEXTLINE = ZLONG_TEXT-LTEXT.
Step6 -> Specify file Legacy
Data On the PC (Frontend)
 Data D:\Sales_Longtext.txt
Step7 -> Assign File ZLONG_TEXT
Source structure for long text
 Data D:\Sales_Longtext.txt
Step8 -> Read data
Output result
Source Structure Read Written Not Written
ZLONG_TEXT 1 1 0
Transactions Read 1
Records Read: 1
Transactions Written: 1
Records Written: 1
Step 8 -> Display read data
Field Name Field Text Field Value
MATNR MATNR MATERIA1
LTEXT LTEXT SALES TEXT FOR Material MATERIAL1
Step 9 -> Convert data
File Read: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.read
File Written: ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Transactions Read: 1
Records Read: 1
Transactions Written: 1
Records Written: 2
tep 10 -> Display converted data
1 /SAPDMC/LTXTH 1 MVKE MATERIAL1 0001 E
2 /SAPDMC/LTXTL 2/ SALES TEXT FOR Material MATERIAL1
Step 11 -> Start direct input program
Output result for the same
Legacy System Migration Workbench Project:
ZNRD_PRJ1 ORH
Subproject: ZNRD_SUBPRJ2 Upload long text
Object: ZNRD_LTEXT Long text tru direct input
File : ZNRD_PRJ1_ZNRD_SUBPRJ2_ZNRD_LTEXT.lsmw.conv
Long Texts in Total: 1
Successfully Transferred Long Texts: 1
Non-Transferred Long Texts: 0
Now when i check the material master sales view -> sales text it is empty. Please help me with the same.
Regards,
Ranjith N

Equipment BOM using LSMW- standard batch/Direct input method - reg

hi,
I tried to upload equipment BOM using standar batch / direct input method.
I have maintained sorcue structures for BOM header and Item, maintained source fields.
Both source fields have common field as equipment number.
It is working fine upto step display read data.
At step, convert data- i am getting ABAP dump.
"Data objects in Unicode programs cannot be converted" is displayed in dump
If any one tried before or experiance similar condtion before, please help
thanks & rgards,
Kiran kumar.Kasturi

Hi,
thanks for your inputs.
In the Specify files Step ,when specifying the file from system , in separators,selected Tabulator .
and I have done already all the above while uploading my header and item file ( type tab delimited) and
still iam getting error at convert file step.
please help
thanks & regards,
Kiran Kumar.K

LSMW - Standard Batch/Direct Input Method.

Hi all,
I was trying to create the LSMW for MM01 using standard Batch/Direct Input Method. While I selected object as "0020- Material Master" I am not able to get the Method for Batch Input. Is there any we can create method for batch input or we have to use only direct input?

You have to use direct input method RMDATIND object 0020 to create materials. You may find batch input very complicated to create materials.

LSMW Direct Input Method RMDATIND tax classification material

Hi folks,
I am loading material master data throught LSMW using direct input method. In MM01 for a particular sales org we have tax classifcation for three different countries US, CA and GB. Could anyone tell me how do I post the tax classification Material data in the table control for these three different countries.
COUNTRY COUNTRY TAX CATG. TAX CATEG.       TAX CLASSIF
CA     Canada     CTX1     GST (Canada)     ...........
CA     Canada     CTX2     PST (Canada)     ...........
CA     Canada     CTX3     PST (Base+GST) Cdn...........
GB     United Kingdom     MWST     Output Tax...........
US     USA     UTXJ     Tax Jurisdict.Code     ...........
US     USA     UTX2     County Sales Tax     ...............
US     USA     UTX3     City Sales Tax     .............
Points will be rewarded for the answers.
Thanks,
Raj

Hi,
Not sure about the same requirement of countries & tax codes for all the materials for your upload.
If this is the case,
enable the
Extras->DisplayVariant
from the menu of the LSMW & check all the check boxes. Now you see the
__END_OF_RECORD__
for the structure
BMMH2
which has to be mapped with the input structure in the Maintain structure relations step.
double click on the
__END_OF_RECORD__
which will lead to ABAP editor & then put the following code:
* Canada
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX1'.
bmmh2-taxm1 = '1'.
transfer_record.
bmmh2-stype = '3'.
bmmh2-aland = 'CA'.
bmmh2-taty1 = 'CTX2'.
bmmh2-taxm1 = '1'.
transfer_record.
else if you have a different set of countries with different tax codes for the set of materials,
You need to have a separate file for this & map the fields to the structure fields of
BMMH2
Hope this helps.
Best Regards, Murugesh AS
Message was edited by:
        Murugesh Arcot

LSMW Direct input method error

Hi experts,
   I created the LSMW using direct input method (PR Creation).
   In the create batch input session step (executed) i am getting below
message and follwed bt processing terminated message and going out
Transaction 0: transaction code / not supported
what could be the problem ? any problem in specifying logical path .
pls let me know the solution.
Thanks
sai

Hi chenna,
   Thanks for reply, I added the tcode and now getting the message like the session was created
but when i see in sm35 there is no seesion created and there is no log also.
what could be the reason? pls explain
thanks
sai

Special character "/" replacing with blank with Direct Input Method posting

Hi All,
I am posting FI historical data using Direct Input Method. Payment term contains special character "/"( I/E). SAP standard program replacing Special character "/" with blank (I E) so document posting is failing. Could you please advise.
Thanks
Chandra.

Can You please specify the Transaction code and SAP program name for direct input.

Customer Master Conversion - Direct input method

Hi,
I want to extend the sales area of the customers who are already existing using Direct Input Method. But I am getting the Error.
Thanks
Raghavendra

Hi Raghavendra,
Can you tell what error ur getting?Also which structure you are using ? I think the structure BKNVV / BKNZA needs to be extend for this additional extended sales area.
Also try to use Batch input seesion methos. in that you may get the structure name which we need to extend.
Pradeep

Material Master upload - LSMW direct input method - Internal Number problem

Dear friends,
I am uploading material masters with LSMW - Direct Input Method.
The materials have internal numbers.
I have four plants and I want to extend the same material in all plants.
But LSMW is creating a new material for each row.
Is there any way out or any indication I put in file to repeat the internal numbers created for all other plants?
I can create another LSMW for material extension. But I want to know whether the problem can be solved in the current LSMW?
Regards,
Avinash

http://www.sap123.com/a/98/
Check the internal number range once.... before extending mateial...

LSMW - DIRECT INPUT METHOD FOR UPLOADING PP MASTER DATA

Dear Gurus,
A LSMW project (DIRECT INPUT METHOD)has been created for PP master.
But Now They have Lost Previous File which they have prepared Earlier.
Now to Create a file for the Same Project wat fields need to be taken.
By taking only Source structure fields it is giving error.
In project some constant fields are also there.
pls guide me.
With Regards,
GMP

have Lost Previous File
what does that mean? did they lose the source that should be used to load the data from?
without source you cannot load data.
Had you ever got this source file? how? by mail, then check your old mails and take it from there, ask the sender to he/she checks the SENT folder in his mail system. Maybe someone has a local copy of this fille.

Error Log in Direct Input Method of LSMW

Hello!
We are developing an upload through LSMW using its direct input method for material master. This method is better than the Recording method but the only problem we are having is maintaining the error log. Unlike the recording method, in direct input the system gives an error log but it cant me maintained in a permanent file i.e when we go back to the upload for specifying a new file, the error log of the previous file is gone.
Is there any way that we can maintain the error log in a permanent file? Help needed ASAP!
Thank You!
Regards
Sahar

When i enter %PC in the command field the system gives following information
Function code cannot be selected
     Message no. 00255
Diagnosis
     You entered an inactive function code.
     You can trigger this by:
     o   inputting directly in the OK code field,
     o   inputting the fastpath of an inactive menu function,
     o   choosing an inactive function key, or even by
     o   choosing ENTER, if ENTER has an inactive function.
     In batch input, a function code is included in field BDC_OKCODE of the
     session, if this function code is not assigned to ENTER.

LSMW Direct input method: 0150 Characteristics with Values

I am trying to upload several characteristics with Values using LSMW Direct Input method 0150.I have defined 2 level structure for Characetristic header and values. Have set the relevant indicators as 1 for characterisitc data and 2 for Values. I have set the T-code to CT04.I am trying to upload the data but only Characteristic data is getting generated and not the values. Can anyone help me out as to what may be the reason.
The fields I have in my uploading template is as below:
LINK NAME DESCRIPT STATUS FORMAT LENGTH DECIMALS UNIT WERT
1 TON WEIGHT LIFT CAPACITY 1 NUM 8 0 ton
2 20
2 50
2 60
2 70
2 100
The Fields I have mapped in Source structre are:
Source Fields
 CHARACTERISTIC PM Characteristics
 LINK C(001) Identify Field Content:1
 Identifing Field Content: 1
 NAME C(030) Characteristic Name
 DESCRIPT C(030) Characteristic description
 STATUS C(001) Status of a characteristic
 FORMAT C(004) Data Type
 LENGTH C(002) Number of Characters
 DECIMALS C(002) Number of Decimal Places
 UNIT C(006) Unit of Measure, Language-
 CHARACTVALUE Characterisitc Values
 LINK C(001) Identify field content
 Identifing Field Content: 2
 BLANK1 C(001) Blank1
 BLANK3 C(001) Blank3
 BLANK2 C(001) Blank2
 BLANK4 C(001) Blank4
 BLANK5 C(001) Blank5
 BLANK7 C(001) Blank7
 BLANK6 C(001) Blank6
 WERT C(030) Characteristic Value
Source Structure is:
Source Structures
 CHARACTERISTIC PM Characteristics
 CHARACTVALUE Characterisitc Values
Structure relation is as below:
Structure Relations
 BGR00 Batch Input Structure for Session Data <<<< CHARACTERISTIC PM Characteristics
 Select Target Structure BGR00 .
 BIMST Batch input for characteristics <<<< CHARACTERISTIC PM Characteristics
 Select Target Structure BIMST .
 BIMZW Batch Input: Allowed Characteristic Values <<<< CHARACTVALUE Characterisitc Values
Can anyone help me resolve this issue.....
Thanks in advance
Murad

Hi,
Go through this links its might helpfull to you.
Re: Porblem during characteristics LSMW
Assigning Characteristics to a class using LSMW
Issues Uploading Characteristics Data into SAP Using LSMW
LSMW: CHaracteristics Load
Thank you,

LSMW-direct Input Method for Vendor-XK01.(Urgent)

Hi Experts,
When we are uploading vendor master details thru lsmw using Direct Input we are encountering an error message in the step Create Batch Input Session and the error is Special character for empty field is /.
Beacuse of this the session is not getting created.
We are passing only mandatory fields not the entire fields specified in the program RFBIKR00 Method : 0001 ,Object 0040.Hence its taking nly / for the empty fields.
Please advice how can we rectify it.

check whether you are passing all the fields mentioned in the structure difined by you. if u delcared some fields in your passing structure and you mapped all these fields with standrd structure you have to pass compulosry those fields otherwise you have to put a validation at the field mapping.
double click on the mapped field. insert the validation.
( suppose u have a field qsskz in your structure and for some records you are not passing any value to this field then you have to add following validation)
if itab-qsskz is initial.
blbf1-qsskz = '/'.
else.
blfb1-qsskz = itab-qsskz.
endif.

LSMW direct input method

Hi
What is the procedure to include a specific program / report in the drop down box of program name of Direct Input method in LSMW?
What is the diff. between Physical path and Logical path?
How can we give our input data using logical path when we execute some standard batch or direct input programs?
Ex. RMDATIND.

http://help.sap.com/saphelp_erp2005vp/helpdata/en/87/f3ae63e68111d1b3ff006094b944c8/frameset.htm
Regards,
Amit

Using Direct input method(LSMW)Can I upload only 3 fields for MM01

Similar Messages

Maybe you are looking for