Using disk utility to create a disk image then burn to an external drive

I have an iMac which does not have the ability to burn my iDVD projects to a DVD. Can I save my iDVD proj. to a disc image? Then write that image to an external DVD writer via Disk Utility?

This is from _Disk Utilty Help_. Erasing a disk is the same as formatting it. These directions are for Tiger; check this topic in Leopard to see if there is any difference in the directions.
+_Erasing a disk or volume_+
+You use Disk Utility to erase disks and volumes.+
+Erasing a disk deletes all the volumes and files on the disk. Erasing a volume deletes all the files on that volume, but does not affect other volumes. Erasing a recordable disc, such as a CD-RW or DVD-RW disc, creates a blank disc with no formatting.+
+IMPORTANT: If you have any files you want to save, be sure to copy them to another disk before you erase the disk they are on.+
+Usually when you erase a disk or volume, Disk Utility erases only the information used to access the files on the disk, not the actual files. Because of this, the erased files can be recovered. If you want to erase a disk so that the files cannot be recovered, you can select security options to write zeros over the disk space.+
+If you want to erase an external disk, connect the disk to your computer.+
+In Disk Utility, select the disk or volume in the list on the left.+
+Click Erase.+
+Choose a format from the Volume Format pop-up menu. Usually you will choose Mac OS Extended (Journaled).+
+Type a name for the disk or volume.+
+If you're erasing a disk and plan to use the disk with Mac OS 9, select the checkbox to install the Mac OS 9 drivers.+
+You do not need to install the Mac OS 9 drivers to use the disk with the Classic environment.+
+If you want to erase the entire contents of the disk by writing zeros, click Security Options, then select the option you want and click OK.+
+Click Erase.+
+To erase your computer's startup disk, you must start up from another disk. You can use your Install Mac OS X disc.+
What does "journaled" mean?
Check this out for the answer. http://docs.info.apple.com/article.html?path=Mac/10.5/en/8835.html

Similar Messages

  • Disk Utility to Create a DVD from an image

    I get stymied when I try to us a diskimage as a source to make a DVD. I have a new DVD-R and it always wants to erase the disk, I cant get past that screen after I choose the drive as the destination. It wants to erase the disk but says it cannot erase this disk. There is noting in the help file to shed light on what to do. How do I make a DVD from a disk image ceated with iDVD?

    I'm not sure how you are doing it but it should be done as follows. open Disk Utility and drag the disk image to the left pane in DU just below the volume list. then select the disk image in DU and press the "burn" button in disk utility toolbar.

  • Anyone know Disk Utility, Ignore Ownership, and disk image DL DVD issues?

    I am currently having issues with backup DVD's I burned using Disk Utility. I can put the dual layer DVD's in and the system reads them. When I try to pull a file off the Dual Layer DVD a circle with an X appears notifying me that I cannot copy the files to my desk top.
    When I check the DVD's permissions it reads Admin (me) read and write with the ignore ownership checkbox checked...which means I should be able to pull files off the DVD. The only way I can currently get information off the DVD is to duplicate the entire disk to a new folder by selecting the DVD while holding down the Cntrl key and selecting duplicate. I have had other issues with DVD's and disk images in Leopard....including having to eject either through disk utility or by selecting the image with the Cntrl key held down. Finder eject, keyboard eject, and the menu eject selections suddenly report that the disk is in use.
    The DVD's were burned by creating a dual layer dvd image through disk utility with the read/write option checked.
    After duplicating 2-3 disks, the system itself is unable to mount any more disks from the series of backups. When I look at disk utility it reads that the disk is not mountable. I have to restart my computer so the system can continue to read the backups.
    My Itunes disk backups are marked the same way (ignore ownership) with admin read/write privlages....I have no problem pulling files off these disks.
    I have tried both logging in as root and booting from an external drive...same problem. Is this some nasty Disk Utility bug? Is anyone else having bizarre permission related issues with Disk Utility and Disk Images.

    When you create the image in Disk Utility, did you
    change the 'Partitions' setting?
    If you leave it to read 'CD/DVD', it will create a ISO9660/UDF image.
    To be able to maintain permission and extended file attributes, you
    need to select 'GUID Partition Map'.
    I assume you used iTunes to create your music backup?
    It seems it creates the correct image type for you.
    Before sending this message, I actually created a single layer image,
    copied some files to it and gave additional permissions to other users on my system.
    Afterwards I copied the files to my Desktop, verifying that the attributes are still intact.
    Best regards
    (It took quite a while to burn this 4x DVD-RW Anyways, I hope I could help)

  • Using Disk Utility to restore/copy disk - who is correct?

    I had two long talks with two separate Apple Care people online today who both insisted what they were saying was right and the other person was wrong.
    Hmm....
    My question is this.
    I have a MBP and the internal HD is currently empty. I've been running off of an external HD for about a year now.
    I want to clone my external HD into my internal HD and use the internal HD as my system disk now.
    One Apple Care person said to go into Disk Utility, select the source disk, from the tabs on the right hand side select Restore and then drag the source disk into the source field, drag the target disk into the target field and press restore. She said this will make a complete clone of the external HD in the internal HD.
    The other Apple Care person said "No no no. You can't do that to clone a system disk that way." He said the best thing was to install a new system and then use the restore as a new system from Time Machine option (where I also have a backup.)
    I believe the second method will work, but it's more cumbersome for me because I haven't been backing up everything in Time Machine. I have excluded items, such as podcasts and Parallels disk images.
    If I could do this from the external system disk life would be easier.
    But is the first Apple Support person right or wrong about this? Can I use Disk Utility to copy the system disk from one external HD to another that way?
    Thanks,
    doug
    p.s. I am not in the market for 3rd party software to deal with this one-time issue, so if possible I would like to accomplish this using OS X included features...

    The advantage is CCC has built in routines that "bless" (see the Terminal.app command "bless") the
    os x installation so it will boot properly on the new volume it is being installed on.
    Disk Utility simply copies (restores) files from one volume to another. Many times this works just fine.
    Sometimes it won't boot afterwards. Most of the time (as long as there are no system files missing
    or corrupted) a person may "bless" the drive and restore it to working condition.
    CCC is not a "magical" application, it is in fact a front end to applications that already exist separately
    in OS X (asr, hdiutil, diskutil, bless, etc.).
    It doesn't matter to me how you do it. It's your time not mine. Everyone should spend some time
    behind the command line in terminal. I do many tasks using the command line, including and not
    limited to complete system restores, backing up data, disk partitioning, installing software, disk
    repair, permissions repair, ACL management, restoring data, managing disk images, network
    management, user management, file management, etc. Many people are fearful of the command
    line. I feel just the opposite, I'm fearful without it.
    Say Hello to my little friend.
    http://manuals.info.apple.com/enUS/Command_Line_Adminv10.5.pdf
    http://www.apple.com/downloads/macosx/unixopensource/clix.html
    http://www.macobserver.com/tips/macosxcl101/index.html
    http://www.matisse.net/OSX/darwin_commands.html
    Kj

  • I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

    I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down  command+optoion+p+r and still nothing???
    Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

    Unless your iMac is still covered by AppleCare, get an external DVD burner.
    You can get perfectly good ones from Amazon for less than $40.

  • How do I do this:  "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk?"

    "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."

    Stick the disk in, reboot holding c.
    Disk Utility is a menu option about the 2 or 3rd screen in the installer. (don't install OS X!)
    Because your booted form the installer disk, you can repair the disk.
    Quit and exit the installer and reboot.
    If your drive is not repaired, make a note of all what it says, for Apple to use.
    Reboot and get your files off to a external drive,
    Take the note and your comptuer to Apple for a warranty/Apple care call, they will replace the drive.

  • Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and store my backed files.  I am using an I Mac 2010.  I am not sure what caused this problem.   I use time machine

    Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and restore my backed up files.  Since I use time machine, can I assume that all my files and programs can be restored from my recent back ups? 

    Hi jeromefrodia, 
    Welcome to the Apple Support Community!
    I understand that you are concerned about your data before reformatting the disk. Because you use Time Machine your information should be safe. Please refer to the attached article for information about what Time Machine backs up and how to restore from that backup. 
    Mac Basics: Time Machine backs up your Mac
    Cheers,
    Joe

  • Disk Utility - Unable to Shrink Disk Error

    hey guys,
    I have been trying to shrink my system partition but i keep getting an error.
    I had Vista installed on a boot camp partition, but i needed to reinstall it and i decided to start from scratch. I erased the vista partition and tried to recreate it. I ran boot camp assistant but that failed at creating a new partition.
    I ran disk utility to first try and shrink the system drive, then increase the size to full before i rerun the boot camp partition. however, i cannot shrink.
    this is the error i get.
    http://dl.getdropbox.com/u/734117/Screen%20shot%202009-10-25%20at%208.48.54%20AM .png
    I had only about 35 gigs free and i tried to create a 20 gig partition. after that error, i erased some data and now have just under 100 gigs free. but the drive still cannot shrink
    I was hoping to find a way to shrink the drive, or defragment without having to erase the entire disk and reinstall. i do not have the backup capabilities to move all my data at this point.
    Thanks for your help

    Hahmad wrote:
    How do i create a clone?
    first, you need an external drive. then use CCCloner http://www.bombich.com/index.html
    or Superduper http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
    to clone the OS X partition to the external. make sure that the external is formatted with GUID partition scheme before cloning. if needed reformat it first with disk utility.

  • Disk Utility can't repair disk

    Hi, I just saw that the amount of memory left on my HD just dropped around 60GB, so I used the "Verify Disk" option on Disk Utility, and the output was:
    Verifying volume “Macintosh HD”
    Performing live verification.
    Checking Journaled HFS Plus volume.
    Checking extents overflow file.
    Checking catalog file.
    Checking multi-linked files.
    Checking catalog hierarchy.
    Checking extended attributes file.
    Checking volume bitmap.
    Checking volume information.
    Volume header needs minor repair
    The volume Macintosh HD was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
    I don't have the disk right now, so is there some other way I can repair it, get another install disk, or anything else? I've been thinking of booting up with a Linux livecd, but can it access the HFS+ filesystem?
    Thanks.

    Try this: from http://support.apple.com/kb/TS1417
    Start up your computer in single-user mode to reach the command line.
    Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    At the command-line prompt type:
    /sbin/fsck -fy
    Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
    ** The volume (name_of_volume) appears to be OKIf fsck found issues and has altered, repaired, or fixed anything, it will display this message:
    ***** FILE SYSTEM WAS MODIFIED *****
    Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    When fsck reports that your volume is OK, typerebootat the prompt and then press Return.
    Your computer should start up normally and allow you to log in.
    If you can't find your original install disk, you could always buy another Snow Leopard disk. It's only $29.

  • Macbook w/ whole slew of problems...Won't Start Up, Disk Utility Can't Repair Disk, Horizontal Lines on Screen, Etc.

    I purchased my Macbook in the summer of 2011 and before it went berserk it was running Mavericks. 3 years later, it's finally seemed to have run its course.
    It won't start up normally and it won't start up on safe boot. Attempting to use disk utility to repair the disk only gives me the message: "Disk utility can't repair this disk. Back up as many of your files as possible." There are also horizontal lines across the start screen (before it inevitably shuts down) and the screen looks very faintly purple-ish/off-colored.
    This actually didn't come out of the blue. On Monday, my macbook suddenly froze, went white, and beeped three beeps repeatedly. I restarted it and backed up all my important work files and set up an appointment at the genius bar for Friday once work ended. It remained buggy during this process with the beeps returning an occasionally a blue screen popping up.
    Unfortunately, there wasn't enough space to back up my important photos and by the time I returned on the next day with an external hard drive to store them on, my macbook would no longer turn on.
    Is there anything I can do to bring my macbook back to life? Ideally I'd like for it to last one more year before I graduate college. Is it still salvageable, and if so, is it worth salvaging?

    I hate to spread gloom, but that computer has serious problems. The only people who can diagnose the problem(s) are technicians. I would take it back to the Apple store for further testing.
    Barry

  • Disk Utility - Can't repair Disk - Help needed :(

    Hi,
    I have some trouble to use Disk Utility (on my iBook G4 - 1.33 Ghz+1 GB RAM)
    I run Disk Utility to verify and repair permissions, which worked, and then Verify Disk. HEre is the logged result:
    ++++++++++++++++++++++++++++++++++++++++++++++++++++
    Aug 26 09:32:58: Disk Utility started.
    Verify permissions for “E=G4”
    Determining correct file permissions.
    Permissions verification complete
    The privileges have been verified or repaired on the selected volume
    Verifying volume “E=G4”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Invalid volume free block count
    Invalid volume free block count
    uld be %@ instead of %@)",2)
    4078185
    4078184
    Volume Header needs minor repair
    The volume E=G4 needs to be repaired.
    Error: The underlying task reported failure on exit
    Disk Utility stopped verifying “E=G4” because the following error was encountered:
    The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    I wanted to run Disk Repair, but the button would not highlight, therefore could not be started.
    I retried today, and now the Verify Disk task won't even work, blocking Disk Utility (needs force quit)
    (E=G4 is the name of my Hard Drive on the iBook)
    I also tried TechTool Deluxe coming with Applecare protection plan, but TTD can not check the "Volume Structure".
    Has anyone got any tips or sequence to solve this?
    Thanks in advance
    Yann
    Message was edited by: ObiYann

    I just ran the Disk Utility, and cannot very disk. It gives me an error message;
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    and when I run the repair, this is the message:
    The volume GERRARD could not be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    1 volume could not be repaired because of an error
    Repair attempted on 1 volume
    1 volume could not be repaired
    Prior to running Disk Utility, I have already tried DiskWarrior, and could not repair my disk. Anyway I can fix this problem??? Formatting the disk would be my last option (though I am unsure if it will fix the problem). Any advise would be greatly appreciated. Meanwhile, I will continue to back up my file, and delete unused data and try to run it again.
    Thank you all very much for any input.
    Cheers,
    Matt

  • Lion Install thinks that the system disk "Macintosh HD" is not Mac OS Extended (journaled); it is. Exactly what do I do in Disk Utility to "reformat" the disk, I don't see that listed on the menus.

    Error Message, during installation of Lion; “This disk is not formatted as Mac OS Extended (journaled). Use Disk Utility to enable journaling or reformat the disk.”  The disk I selected to install OS X on, was the only one listed, “Macintosh HD”. The results of a Disk Utility check are; Format: Mac OS Extended (journaled), Name: Macintosh HD. There is a fresh Time Machine backup. The computer was Restarted and installation attempted again - same result. I have downloaded Lion a second time, and tired install again, same results. The computer is a December 2007, iMac 24” with 2.4 GHz Intel Core 2 Duo, 4 GB Memory, s/w version 10.7.5; Disk Capacity 319 GB, Available 117 GB. Macintosh HD has alway been the system disk, does it now have an identity crisis? Would reformatting the disk mean Erasing it? Exactly what do I do in Disk Utility to “reformat” the disk, I don’t see that listed on the menus. This computer is getting cranky, I no longer Shut Down at night, only Sleep. If it’s Shut Down, the next morning I am treated to a white screen, for a long time, before it finally shows me the Log On Screen.  Suggestions would be appreciated.

    RRFS - This took me a long time to finally get to a fix. Your reply led me to investigate the Repair Disk Partition - as it turned out there wasn't one; the HardDrive was going bad slowly. The 10 to 40 minutes it took to startup in the morning, was the HD trying to find it's way. I had the 320GB HD replaced with a 2TB HD. All is OK now. Thank You very much!!  Also, the Apple store geeks couldn't make it better but the locally owned Apple retailer did just great with it. from San Luis Obispo County - Peace.

  • Yosemite on MacBook Air - Third time installed, now will not be startup disk.  Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files.  How delete plist files?

    Yosemite on MacBook Air - Third time installed, now will not be startup disk.  Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files.  How delete plist files?
    What does "Accessibility" mean?

    Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
    To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
    Then open Terminal and type in: sudo fdesetup disable
    It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
    Here is my terminal log for reference:
    Last login: Tue Oct 21 23:05:13 on console
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is On.
    Encryption in progress: Percent completed = 18.80
    Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
    Password:
    Enter a password for '/':
    ..fdes.
    FileVault has been disabled.
    Gowthams-MBP:~ asgowtham$ fdesetup status
    FileVault is Off.

  • My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

    My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
    So I can't format the disk in the Time Capsule
    Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
    What can I do?
    Joe

    I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
    In finder use top menu, go, connect to server.
    Type in the following.
    AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
    If that fails..
    try
    SMB://TCname
    Here is the screenshot.
    tardis4 being the name of my TC.
    It should then ask you for your credentials.
    And it should remember them in the keychain and be able to then get TM to connect.

  • Disk Utility has been Shrinking disk for several hours....

    I have an external HD (FW800/GUID) that has 2 partitions in it that I'm trying to reduce the size of one of the partitions to make room for a third without deleting anything on the drive. Disk Utility has been 'shrinking disk' for several hours and I'm debating if it's hanging. I see no activity on the drive, so I'm not sure what's going on.
    How long should this typically take to finish?
    the partition in question has about 1.3T of data on it and I'm trying to free up about 300G that's unused.
    Should I be concerned? How long should I let this go before bailing the app?

    What's the chance that the data will be corrupt if I force quit disk utility?
    In the middle of repartitioning that has apparently hung? I would guess it would range somewhere from high to certain. You should immediately use Disk Utility to repair both partitions after force-quitting.
    I didn't make a backup
    I hope you're lucky, but I have the feeling you're about to learn your lesson about not having backups in a very severe way. If the drive cannot be repaired at this point, you may need a file recovery utility like [Data Rescue|http://www.prosofteng.com> or [File Salvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1].
    In the future, you absolutely must have a minimum of two backups (three copies) of any data you can't afford to lose.

Maybe you are looking for