Using domain security groups in exchange security groups for Office 365
Hi
Is there a way to use O365 domain security groups in O365 exchange security groups. This can be done between O365 domain security groups and O365 SharePoint groups.
BR // Ille
Sorry I missed your reply.
I don't believe there is a way to do this yet, security groups used within exchange need to be mail-enabled security groups, these can't then be edited from the office365 portal, just the Exchange administrative centre portal.
It looks like you currently still need to keep these separate.
If you use DirSync and sync from your own domain then it is possible, since you manage the groups from your AD rather than Offfice365, but currently just in o365 there doesn't appear to be a way to do this.
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
Blog: http://www.windows-support.co.uk
Twitter: LinkedIn:
Similar Messages
-
Domain on on-premise Exchange and subdomain on Office 365 coexistance
We have a client with, what seems to me, an odd request regarding their exchange topology. They are a small college and have their mail split between on-premise and O365. Their on-premise Exchange 2013 has email setup for domain.com, used by the
faculty. Their O365 is setup for students.domain.com and is sync'd with AD using MSO Dirsync. Currently, the two do not interact at all and is causing issues with staff emailing students. Since they are educational, we have advised them
to move the faculty over to O365, however they throw that option out every time we bring it up. They want to keep their faculty email on premise and leave the students in the cloud. They want these separate, but still want the features
of a single exchange forest. They want the students to be in the address-book, and be able to use distribution lists between the two.
What I'm wondering is if hybrid deployment will allow this to happen. Based off my limited exchange experience, hybrid is used for the same domain across on-premise and O365, not for 2 separate domains. I feel like two separate domains doesn't
really matter, since they are all AD mailboxes anyway.
What I'm asking is if hybrid deployment would be the way to go for this, and if there would be any documentation as the how to this exactly. What I'm finding is documentation on the same domain split between the two, not 1 domain on exchange and 1
domain on O365.
Any help is appreciated, thank you!Thanks for the reply! Fortunately for our situation, all the accounts in O365 are deleted at the end of the semester, so to completely rebuild the O365 setup is not out of the question at all.
I guess I'm curious about the specifics for this. I've setup hybrid deployment before for a single domain, so I take it this will be similar. I suppose the DNS wouldn't need to change, right? O365 would receive mail for students.domain.com and the exchange
would receive mail for domain.com. Then they'd each rely on the connectors to send mail back and forth. What about DirSync, would I then need to sync the staff as well as students to O365?
And how about OWA, would the students then access webmail through OWA, or still use O365?
Sorry if any of this is basic, exchange is my weakest skillset.
Thank you! -
How to add Distribution Group email alias from CSV in office 365
Hello Forum!
Hope someone can help me troubleshoot this or even let me know if its not possible. But, I used powershell to import distribution groups and set primary emails in Office 365. That worked great, but we have two domains and i would like to add an email alias
to all my DGs for the other domain.
This was my best attempt and its not going well:
Import-CSV "C:\distributionlists.csv" | foreach {Set-DistributionGroup "$_.Name" -EmailAddresses SMTP:$_.PrimarySmtpAddress,$SecondarySmtpAddress}
$_.Name is the column name for my DGs. IE: DL-IT
$_.PrimarySmtpAddress is the column name for my primary email. IE: [email protected]
$_.SecondarySmtpAddress is the column name for my email alias. IE: [email protected]Hi,
Based on my understanding, the below code should work when your manually run it:
Set-DistributionGroup "DL-accounting"
-EmailAddresses SMTP:<Primary Email>,<Alias Email>
If all those distribution groups have been already created, then use set-distributiongroup command should work. How about first new those distribution group, and then run foreach block to do the loop.
Regards,
Yan Li
Cataleya Li
TechNet Community Support -
I'm using the SharePoint 2013 Client Object Model to access a site that is either in Office 365 or behind an ADFS 3.0 login screen, is it sufficient to use the new SharePointOnlineCredentials credentials
or do I need other types of credentials for the sites behind ADFS 3.0 ? Is so, what type of credentials would I use for the sites behind ADFS 3.0?
using (ClientContext ctx = new ClientContext(siteUrl))
ctx.Credentials = new SharePointOnlineCredentials("some user", "a secure string password");
while (ctx.HasPendingRequest)
ctx.ExecuteQuery();
// etc.Hi,
According to your post, my understanding is that you want to know the ways to get credential either in Office 365 or sites behind ADFS 3.0.
For Office 365, you can use SharePointOnlineCredentials Object to get credential. For SharePoint sites behind ADFS 3.0, you can use NetworkCredential Object:
ctx.Credentials = new NetworkCredential(UserName, Password, Domain);
The link below will provide more information about using the ADFS FedAuth Token programmatically through the SharePoint Client Object Model:
http://samirvaidya.blogspot.com/2013/05/using-adfs-fedauth-token.html
Best regards
Patrick Liang
TechNet Community Support -
PowerShell for Office 365 is here – here's how to use it
After announcing its intention to release new scripts and commands to better integrate PowerShell with Office 365,Microsoft has followed through.The newly ordained PowerShell for Office 365 features the same command-line interface found in PowerShell 5.0 – and that's because it is the same program.According to The Register, Microsoft has created "ascript libraryto help you do things like add users, control licenses, and stop people from recording Skype meetings."Before you start using it, however, you have to "import the modules corresponding to all the bits of Office 365 you want to administer, including the Microsoft Online Services Sign-in Assistant and the Azure Active Directory Module to handle the important matters of security and authentication."The widespread use of PowerShell and its necessity for sysadmins and network admins...
This topic first appeared in the Spiceworks CommunityHi, almightywiz,
Sorry for the delayed response. I was away from office for one day and did not have access to the files.
And you are right, column 11 is text and column 26 is date (i.e., numeric). And indeed, those visually blank cell in column 11 are not null but have zero length. Java can tell the difference but not by visually inspecting the cells in the spreadsheet.
I also checked the POI API documents, and found that org.apache.poi.ss.usermodel.Cell interface, which has those cell types, is implemented by both HSSFCell and XSSFCell. The question is under what condition the cell type of a cell becomes Cell.CELL_TYPE_BLANK.
While that is not yet clear, I will catch cells missing data in column 11 by checking three things: first check if(cell == null), then if(cell.getCellType() != Cell.CELL_TYPE_STRING), and then if(cell.getStringCellValue().length() == 0). And that solves my problem.
Thank you so much for sharing your experience and solving my problem.
I have another problem that may more serious, at Can I process Excel BIFF5 files, or simply abandon Apache POI? It would be very much appreciated if you had time to look at it.
Best regards,
Newman -
Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what
certificates I need. My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.
I've looked at the TechNet article "Certificate requirements for hybrid deployments"
http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:
Hybridserver.domain.edu
autodiscover.domain.edu
EWS.domain.edu
Can anyone clarify?Cert is required only if you want to deploy ADFS for SSO.
Otherwise you can use your existing Cert for all the Services
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Using world minutes for office 365
I have a Samsung Galaxy S4 and I wish to use skype to make telephone calls over a wifi connection using my free 60 minutes that come with my Office 365 subscription however it always says "insufficient credit".
Please can somebody explain to me how I can use these free minutes.
Thank you for your help
JI have the exact same problem on my Nokia Lumi 920 - 58 minutes free on my office 365 subscription but it says insufficient funds when trying to call a mobile number in the UK - very frustrating!!
UPDATE: after a lot of searching I found that the Office 365 Home Premium subscription only can make calls to LAND LINES - sign into Skype in the web browser and go here https://secure.skype.com/account/call-phones/settings?package=api_300-region-landline-world-60&categ... to see the limitations of your account. -
Migrate Notes from Exchange server 2007 to office 365
Hi,
Anyone help me to how to migrate notes from exchange server 2007 to office 365 . My customer having notes on his existing exchange account . We would like to move notes to office 365 .
Please help me or guide me .
Thanks & Regards,
VinothThe way you're doing it has two very high hurdles.
First, you have to get the data out of an offline server and into Office 365. That's hardly a trivial task. If the server were online and reachable by the Internet you could use a move request or a third-party tool like MigrationWiz.
Second, if you do get the mail moved, you will want to synchronize the legacyExchangeDN attribute from the old organization into an X500 proxy address in Office 365 for all mailboxes to preserve mail replyability.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How to Enable Ratings on SharePoint List using Client Object Model code for Office 365 SharePoint Site.
Thanks in Advance
Rajendra KHi Rajendra,
here you are the code and the blog, let me know if this helps
using (ClientContext ctx = new ClientContext(https://yourSiteUrl))
Web w = ctx.Web;
List l = w.Lists.GetByTitle("yourListName");
ctx.Load(l, info => info.Id);
ctx.ExecuteQuery();
string ListID = l.Id.ToString();
Microsoft.Office.Server.ReputationModel.Reputation.SetRating(ctx, ListID, 1, 5);
ctx.ExecuteQuery();
http://blogs.technet.com/b/speschka/archive/2013/07/08/how-to-use-csom-with-ratings-in-sharepoint-2013.aspx
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation -
Add list item using anonymous user in public website of shareopint 2013 office 365
Can any body know the solution to over come of following error while add list item using anonymous user using CSOM in shareopint 2013 office 365 public website.
I have tried following solution to narrow down the error from "Access permission"
http://sharepointtaproom.com/2014/08/28/anonymous-api-access-for-office-365-public-sites/#comment-2304Try below:
http://www.codeproject.com/Articles/785099/Publish-a-Form-for-Anonymous-Users-on-a-Public-Sit
http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/how-to-allow-anonymous-users-to-add-items-to-sharepoint-list-using-client-object-model.aspx
// Allows AddItem operation using anonymous access
private
static voidAllowAnonAccess(){
Console.WriteLine("Enabling Anonymous access....");
SPWebApplication webApp =
SPWebApplication.Lookup(new
Uri(webAppUrl));
webApp.ClientCallableSettings.AnonymousRestrictedTypes.Remove(typeof(Microsoft.SharePoint.SPList),
"GetItems");
webApp.ClientCallableSettings.AnonymousRestrictedTypes.Remove(typeof(Microsoft.SharePoint.SPList),
"AddItem");
webApp.Update();
Console.WriteLine("Enabled Anonymous access!");
// Revokes Add/Get Item operation using anonymous access
private static
voidRemoveAnonAccess(){
Console.WriteLine("Disabling Anonymous access....");
SPWebApplication webApp =
SPWebApplication.Lookup(new
Uri(webAppUrl));
webApp.ClientCallableSettings.AnonymousRestrictedTypes.Add(typeof(Microsoft.SharePoint.SPList),
"GetItems");
webApp.ClientCallableSettings.AnonymousRestrictedTypes.Add(typeof(Microsoft.SharePoint.SPList),
"AddItem");
webApp.Update();
Console.WriteLine("Disabled Anonymous access!");
http://www.fiechter.eu/Blog/Post/12/Create-a-survey-for-anonymous-users-on-Office-365
If this helped you resolve your issue, please mark it Answered -
Hello all,
I am a sysadmin at a 3 campus school, and am trying to extend our AD schema to include Exchange 2013 attributes so that we can configure groups synced to Office 365 using DirSync. However it keeps failing at the same point each time.
I have tried with RTM first, and then CU6, but I keep getting the same error and am unsure how to fix it.
"repadmin /showrepl" says that our 3 DCs are replicating with no issues, and I'm trying to extend the schema using an "Enterprise Admin"/"Schema Admin" account on our schema master DC.
Our domain/forest functional level is Server 2008R2, and we do not have an Exchange server set up already - if that helps.
The PowerShell error is:
PS C:\Users\rbbr\Desktop\Exchange> .\setup /PrepareSchema /IAcceptExchangeServerLicenseTerms
Welcome to Microsoft Exchange Server 2013 Cumulative Update 6 Unattended Setup
Copying Files...
File copy complete. Setup will now collect additional information needed for installation.
Performing Microsoft Exchange Server Prerequisite Check
Prerequisite Analysis COMPLETED
Configuring Microsoft Exchange Server
Extending Active Directory schema FAILED
The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to impor
t the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be
found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object ta
rget, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String
schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePip
elineIfFailed)".
The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the
<SystemDrive>:\ExchangeSetupLogs folder.
And ldif.err says:
Entry DN: CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan
Add error on entry starting on line 452: Unwilling To Perform
The server side error is: 0x20bb Schema update failed: duplicate OID.
The extended server error is:
000020BB: SvcErr: DSID-032603C0, problem 5003 (WILL_NOT_PERFORM), data 8379
An error has occurred in the program
The schema attribute "CN=ms-DS-GeoCoordinates-Altitude,CN=Schema,CN=Configuration,DC=kurnai,DC=lan" does exist in the schema, but I don't know what to do or where to go from here.
Any assistance would be greatly appreciated.I just tried .\setup /PrepareAD /OrganizationName:kurnaicollege /IAcceptExchangeServerLicenseTerms, and got the exact same error as above.
Is there a way to delete the offending schema attributes, or to force its overwrite or something?
EDIT: I am also getting these eventvwr errors when running /PrepareAD, if it helps:
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Proxy Instance Count
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
3540 NBBPassThruAuth_Helper
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1704 conhost
1540 svchost
4492 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
520 svchost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
4440 NBBPassThruAuth_Helper
3648 conhost
884 svchost
1080 vmtoolsd
3440 conhost
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
4760 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
1
Base for Average Latency
MSExchange ServiceProxyPool
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
4136 NBBPassThruAuth_Helper
2756 vds
4168 dwm
1224 NBBPassThruAuth_Helper
776 MsMpEng
2940 dllhost
3924 NBBPassThruAuth_Helper
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
4260 conhost
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
140 NBBPassThruAuth_Helper
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
3472 conhost
712 WmiPrvSE
4388 mmc
2088 dfssvc
1692 MSOIDSVCM
704 conhost
960 svchost
304 csrss
3648 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
5012 NBBPassThruAuth_Helper
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
860 conhost
1644 MSOIDSVC
3416 conhost
852 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
4580 NBBPassThruAuth_Helper
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
4436 conhost
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange ServiceProxyPool : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange serviceproxypool. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 4027 from source MSExchange ADAccess cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ExSetup.exe
4768
Get Servers for kurnai.lan
TopologyClientTcpEndpoint (localhost)
3
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://localhost:890/Microsoft.Exchange.Directory.TopologyService. The connection attempt lasted for a time span of 00:00:02.1106192. TCP error code 10061: No connection could be made because the target machine actively refused it 127.0.0.1:890. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 127.0.0.1:890
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Microsoft.Exchange.Net.ServiceProxyPool`1.GetClient(Boolean useCache)
at Microsoft.Exchange.Net.ServiceProxyPool`1.TryCallServiceWithRetry(Action`1 action, String debugMessage, WCFConnectionStateTuple proxyToUse, Int32 numberOfRetries, Boolean doNotReturnProxyOnSuccess, Exception& exception)
the message resource is present but the message is not found in the string/message table
The description for Event ID 106 from source MSExchange Common cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
2
Time in Resource per second
MSExchange Activity Context Resources
The exception thrown is : System.InvalidOperationException: The requested Performance Counter is not a custom counter, it has to be initialized as ReadOnly.
at System.Diagnostics.PerformanceCounter.InitializeImpl()
at System.Diagnostics.PerformanceCounter.get_RawValue()
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
Last worker process info : Last worker process info not available!
Processes running while Performance counter failed to update:
2756 vds
4168 dwm
776 MsMpEng
2940 dllhost
376 wininit
1556 dns
4900 taskhostex
368 csrss
2152 miiserver
756 dwm
1452 Microsoft.ActiveDirectory.WebServices
1540 svchost
4488 conhost
740 LogonUI
3716 notepad
3888 WmiPrvSE
1712 sqlservr
3484 msseces
916 svchost
1116 sqlwriter
1312 setup
1508 dfsrs
2492 explorer
2688 NBBPassThruAuth_Helper
520 svchost
712 WmiPrvSE
2088 dfssvc
1692 MSOIDSVCM
960 svchost
304 csrss
4436 conhost
884 svchost
1080 vmtoolsd
3836 WmiPrvSE
4388 mmc
3632 dllhost
476 lsass
1852 NBBPassThruAuth
2836 svchost
4016 winlogon
468 services
3028 vmtoolsd
1644 MSOIDSVC
3416 conhost
2624 Microsoft.Online.DirSync.Scheduler
2820 svchost
4592 ServerManager
1236 iashost
636 svchost
2800 svchost
4768 ExSetup
1812 msdtc
1416 spoolsv
3776 NBBPassThruAuth_Helper
1016 svchost
1992 ntfrs
3368 powershell
608 svchost
1592 ismserv
3756 csrss
404 winlogon
204 smss
4 System
988 rdpclip
0 Idle
Performance Counters Layout information: FileMappingNotFoundException for category MSExchange Activity Context Resources : Microsoft.Exchange.Diagnostics.FileMappingNotFoundException: Cound not open File mapping for name Global\netfxcustomperfcounters.1.0msexchange activity context resources. Error Details: 2
at Microsoft.Exchange.Diagnostics.FileMapping..ctor(String name, Boolean writable)
at Microsoft.Exchange.Diagnostics.PerformanceCounterMemoryMappedFile.Initialize(String fileMappingName, Boolean writable)
at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetAllInstancesLayout(String categoryName)
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0938055
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-OrganizationRelationship
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
34
00:00:00.0312685
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Get-AcceptedDomain
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
20
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Data.Directory.SystemConfiguration.OrgContainerNotFoundException: Couldn't find the Enterprise Organization container.
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainer(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Data.Directory.SystemConfiguration.ADSystemConfigurationSession.GetRootOrgContainerId(String partitionFqdn, String domainController, NetworkCredential credential)
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.get_RootOrgContainerId()
at Microsoft.Exchange.Configuration.Tasks.GetTenantADObjectWithIdentityTaskBase`2.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
ServerOperation
Ex31B4F7
False
0 objects execution has been proxied to remote server.
0
ActivityId: a2ea62f0-d687-4594-bb1a-bcd9642a6308
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:02.1887925
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeSchema
-LdapFileName "Setup\Data\schema89.ldf"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
98
00:00:00
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
7
ExA2B06D
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table
The description for Event ID 6 from source MSExchange CmdletLogs cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Install-ExchangeOrganization
-Industry "NotSpecified" -PrepareDomain "True" -DomainController "C-Server1.kurnai.lan" -ActiveDirectorySplitPermissions $null -PrepareOrganization "True" -PrepareSchema "True" -OrganizationName "kurnaicollege"
kurnai.lan/Kurnai/Morwell/Users/Techs/Robert Brandon
Local-Exchange Management Console-Unknown
4768 ExSetup.exe
31
00:03:01.8261106
View Entire Forest: 'True', Configuration Domain Controller: 'C-Server1.kurnai.lan', Preferred Global Catalog: 'C-Server1.kurnai.lan', Preferred Domain Controllers: '{ C-Server1.kurnai.lan }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear();
install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema89.ldf")
" was run: "Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)". ---> Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
--- End of inner exception stack trace ---
7
Microsoft.Exchange.Configuration.Tasks.TaskException: There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\schema89.ldf'. The error code is: 8245. More details can be found in the error file: 'C:\Users\rbbr\AppData\Local\Temp\ldif.err'
at Microsoft.Exchange.Configuration.Tasks.Task.ThrowError(Exception exception, ErrorCategory errorCategory, Object target, String helpUrl)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.ImportSchemaFile(String schemaMasterServer, String schemaFilePath, String macroName, String macroValue, WriteVerboseDelegate writeVerbose)
at Microsoft.Exchange.Management.Deployment.InstallExchangeSchema.InternalProcessRecord()
at Microsoft.Exchange.Configuration.Tasks.Task.<ProcessRecord>b__b()
at Microsoft.Exchange.Configuration.Tasks.Task.InvokeRetryableFunc(String funcName, Action func, Boolean terminatePipelineIfFailed)
Ex88D115
False
0 objects execution has been proxied to remote server.
0
ActivityId: f2ed251d-8d4a-480b-9b98-7b53d4adbcad
en-US
the message resource is present but the message is not found in the string/message table -
Microsoft SAM: Used software to get compliant or other option for Office 2010
I wouldn't buy used Office. Chances are someone's still using the software and figured they could make a quick few bucks. Also, while once you hold the product key and media you technically own that license, who's to say they didn't max the activation count prior to sale.
If you're intent on Office 2010, perhaps you could find some unopened Product Key Cards for purchase.We are still kicking the can down the road with Exchange/Outlook 2010 utilizing Public Folders and a custom application that runs against them. Got hit with a SAM audit and short a few licences of Office Home and Business 2010 (Retail/FPP). As far as I am aware my only options are Volume Licensing Office 2013 and use the downgrade rights or buy used licenses of Office 2010 (Retail/FPP). My research has noted that they no longer offer Office 2010 through Office 365. Any thoughts or concerns?
This topic first appeared in the Spiceworks Community -
Hello All:
I am receiving an error when I run the Manage Hybrid Configuration wizard - ERROR:Updating hybrid configuration failed with error 'Subtask NeedsConfiguration execution failed: Configure Recipient Settings. I have opened a SR, but figured I'd try the forums,
too. I have a wildcard certificate from GoDaddy (MS says they support wildcards from GoDaddy) & that cert has only the IIS service applied to it on the CAS. I've read in the Exchange Server Deployment Assistant that it should have the SMTP & IIS services
assigned to it, but my question is - SMTP on the CAS (separate server) or on the Mailbox/Hub Transport (separate server)? And what are the ramifications of assigning the SMTP service to, let's say, the CAS? We have had multiple issues every time the servers
get updated/changed; I do not want to disrupt services further, as the Manage Hybrid Configuration will be done during business hours.
If anyone can provide any assistance/clarification, it would be most appreciated.
Thank you.Hi,
We can enable a Wildcard certificate with SMTP service for Exchange Hybird Deployment. The SMTP service can be assigned to multiple certificates. For some Exchange services such as OWA, Ecp, ActiveSync, Autodiscover service, OOF, it is used with Exchange
certificate with IIS service. And there is usually only one certificate can be assigned with IIS service.
Please just make sure your Wildcard certificate can contain all namespaces which are used for all internal URL and External URL configuration in Exchange services. About how to import an existing wildcard certificate on the Exchange 2010 Hybird servers,
please refer to the Import & Enable Third Party Certificate on Hybrid Servers
part in the following article:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/configuring-exchange-hybrid-deployment-migrating-to-office-365-exchange-online-part9.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Regards,
Winnie Liang
TechNet Community Support -
Exchange Server 2013 and Office 365 Integration
If we are using Exchange Server 2013 on premise, can we have 2 of our users integrated with Office 365 so that they can utilize their Exchange Server email account with the apps and features of Office 365?
Hi,
You can deploy a hybrid environment using Exchange 2013 CU2 or later version with Office 365.
Could you please tell me what do you mean by "we have 2 of our users integrated with Office 365 so that they can utilize their Exchange Server email account with the apps and features of Office 365"?
Here is my understanding: You create these two mailboxes on Exchange 2013, but you need to allow for redirection from the on-premises OWA environment to the Office 365 OWA. If that is your case, you need to specify a target URL for your organization(for
example, www.outlook.com/contoso.com). If I have misunderstood your concern, please let me know.
For more information, here is an article for your reference.
Plan an Exchange Online hybrid deployment in Office 365
http://technet.microsoft.com/en-us/library/hh852414.aspx
Hope it helps.
Best regards,
Amy Wang
TechNet Community Support -
Trouble connecting using Mac mail for Office 365
Microsoft says OS 10.9.4 is not supported for an exchange mail account for Mac Mail. I'm using OSX 10.9.4 and Mac Mail 7.3 and previously had an exchange account but upgraded to Office 365 through my workplace. I was able to send and receive but now the connection doctor is saying the Exchange account "Could not connect to this Exchange server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the 'Use SSL' checkbox in the Advanced tab.
The problem I've having as well is that the emails are not saved in my sent folder. The only settings that haven't been updated are under the 'Advanced' settings which are: Internal Server Path, Internal Port, External Server Path, External Port.MobileMe IMAP server “mail.me.com” rejected the password
This is doing EXACTLY what I would expect it to.
You need Lion for iCloud which it should warn you when you do the me.com/move routine.
It's still fixable though:
Wilmut's Entering iCloud email settings manually in Snow Leopard or Leopard
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
Maybe you are looking for
-
I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help
-
Hi I have problems with adobe flash with viewing youtube videos Evrywhere else i can watch videos but on youtube i cant it always gives me the same "Get the latest Flash player" I tried most of the solutions that were mentioned on this forum but none
-
I moved from Verizon DSL and changed to Comcast. The tech spend 5 hours trying to get my internet working via direct Ethernet connect and via the Airport Express; neither worked. It did work on his PC hardwired but not via the Airport. It won't conne
-
How to get only matching rows in Full Outer Join
HI All, I was recently asked this question. How to fetch only matching data from two tables using Full Outer Join. Now, I understand that this is not the objective of using Full Joins but I was wondering whether this is possible or not. Any help in t
-
Getting a Font Error when opening a pdf file with Adobe Reader. All the newest versions of Reader, OSX etc. The error says missing font Univers-Light Sometimes Reader crashes. It turns out this is an Adobe font that I have to pay for???