Using "Download on iTunes" logo in an Image
Hi there!
So here's what... A song I did is available on iTunes and I would like to know if using the logo (Download on iTunes) in the images promoting the song is legal???
Thanks guys!
Actually this is one of those times when doing this in Photoshop does not make all that much sense since you have to go back and forth from Illustrator and risk having placement problems in Illustrator.
here is what you do
1 place the image file does not matter what format the original is
2 then copy the image and paste in from ( command C, command F (Mac) Control C control F (PC))
3 then draw a shape over the area that you want to obscure
4 then select the shape and the copied instance of the image and make a clipping mask, ( command 7 (Mac) control 7 (PC))
5 then while it is still selected apply a gausian blur effect or if you wish create a mosaic from the Object menu. When creating a mosaic from an image with a clipping mask applied remember to consider the whole dimension of the original image when selecting the number of mosaics.
You can now easily turn the visibility of this area on or off.
You can also flatten the transparency making it a smaller object, it will have a small white area around the which you can recreate a clipping mask for to keep the fie size down.
You can also use different effects like Crystallization, etc. same as you can in Photoshop.
Here are screenshots
You can also give the clipped area a feather effect
Similar Messages
-
I UPDATED MY IPHONE 4 AND NOW IT WILL NOT TURN ON. ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.
plumbin wrote:
.... ALL IGET IS THE ITUNES LOGO AND AN IMAGE THAT LOOKS LIKE THE CHARGER PLUG.
1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
I just finished downloading and attempting the install of ios 7 on my iPhone 5. I'm using the newest version of iTunes.
And now, I'm stuck at the screen with the iTunes logo and the plug. But no matter how many times I try, recovery mode will not work. My phone is currently useless unless I can figure this out.No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?
You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again. -
After downloading the new update for my iphone 4 the screen only show an itune logo, as
well as a plug in picture, thats it. No icons are visible, phone does not come on except to show
the two icons. When I power up it does nothing except shows those 2. When power off I dont even
get the slide off screen it just goes black. WTH?Hello bigboza,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario -
My iPod 4G, after a reset and iOS6 install, after I recopied and synced music, is missing most album art. Even songs directly downloaded from iTunes are missing album art. I'm using iTunes 11.0.1 on Windows Vista. My iPod isn't full. Whenever I go to "On This iPod" and add album art and sync, nothing happens. Please help :/
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have a second generation Ipod and it was delivered to me without an operating system how do I download one on it
Hello Michael.Suarez,
Thanks for using Apple Support Communities.
If the iPod touch is showing an iTunes logo with a cable, then it is in recovery mode and will need to be restored to the factory settings. To get step-by-step instructions on how to do this, please follow the article below.
Use iTunes to restore your iOS device to factory settings
Cheers,
Alex H. -
What is the problem when all you get is a picture of a charging cord and the itunes logo? I tried hooking up to my computer and itunes and it said I could not download the new software while it was in recovery mode but it won't let me do anything else. Any ideas?
I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808 -
iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??
Hi there beee19,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W. -
Cannot turn on ipad 2 after downloading i OS8. All I get is plug and itunes logos.
My iPad worked great until I downloaded the latest update to iOS8. Now, all I see when I turn it on is a picture of the plug pointing toward the iTunes logo. It will not function. I see that I need to do a system restore but I do not want to lose all of the recent apps/music that we have downloaded. What do I do?
You will need to connect it to a computer running iTunes and perform the restore. There's no other option now. Something went wrong with the update, and the iPad is unable to start.
If you can't update or restore your iPhone, iPad, or iPod touch
As to your purchases, as long as you set the iPad backup with the Apple ID uses to purchase those items, you can go to the Purchased Tab in the iTunes and app store Apps, and download them again for free.
You should also want to perform backups either to iCloud or iTunes so that you can restore from them in such cases. -
Loaded update ... restarted ... now stalled on iTunes logo image?!?
I just hit the update button to download ATV2 4.4 and it did a proper download, then it restarted and displayed the itunes logo with the white plug (same as the my itouch when I first got it) and stalls on this image until it's white indicator light starts flashing repeatedly while my screen goes blue with a not that it is receiving no signal.
Ideas?
::dan::If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I received a notice to update my ipad to the latest version of ios7 and when I did the ipad froze with a itune logo and an ipad connector image on the screen..i have turned it off several times but it remains frozen. anyone help with this?
Unfortunately, your iPad went into recovery mode and must be restored now. There is no getting around this. You need to use iTunes to do this as well. Read this for more instructions.
If you can't update or restore your iOS device - Apple Support -
whilst downloading the update to my ipad a screen is up ..the power plug a small arrow above and the itunes logo above that.. it has been there for at least 2 hours... why?? ..or what to do??
wellllll.... it was fixed in 15-20 min at the store.... using the same method you suggested ...go figure.... perhaps my wi-fi was a bit wobbly.... who knows.... most of the info was restored through the cloud... lost my pics, but thats not crucial......they are all elswhere... so your tip was spot on, and i appreciate you help.... thanks again !!
-
I was notified of an iTunes update for my iPhone; I tried to download, but am just showing the screen with the iTunes logo and a picture of a cable end. Phone has been inoperable all day.
Hey there Gina,
It sounds like you were updating your phone, and now it is unresponsive with an iTunes and usb cable on the screen. This appears to be recovery mode, and you should be able to restore the device using the following article to get that install completed:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If not, then reset the device with the following article, and then attempt the restore with the above article:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I couldn't get downloads from iTunes to be on the desktop of my Macbook air but they remain in iTunes folder and refuse to open for use. What am I to do?
Downloads of what? Songs? Apps? Books?
If you're talking about apps, then you have downloaded iOS apps which are intended to run on an iPhone or iPad, not a Mac.
Maybe you are looking for
-
VARRAY colletion type retirval from java , Wrong data ???? retrieved.
Hi all, I am trying to retirve VARRAY collection type created in oracle from Java. It gives the wrong results as below: ********Fetch Starts....******** ********Row 1 : Array is of type MY_UID.STRING_VARRAY Array is of length 2 index 0 = ??? index 1
-
Renderer a document with Windows Explorer
Is it possible to renderer a document when I open this document with MS Word by using the windows interface. In fact, I open the document from windows explorer where I see Oracxle iFS server like a drive. With the web interface, I renderer the docume
-
Problem in Downloading PDF file in ITS
Hi, We are using SSFCOMP_PDF_PREVIEW function module , in ITS only blank screen appearing. There after we made Z function module where we called the ALEWB_DOWNLOAD function module of the screen PBO module. Now file is getting displayed in a full scr
-
After firmware update ipod touch not working with my Sony Home Theater DAV HDX287WC any suggestions
Is there a solution to play music from my iPod touch on my Sony Home Theater System DAV HDX 287WC after recent firmware/software upgrade? However, I am still able to play music through my ipod classic, but I am really missing the the functionality of
-
I am not able to delete music that was synced on my phone by the cloud off of my phone
For some reason some of my families music has ended up on my phone because of the cloud and i cannot figure out how to delete it. I have tried to delete all my music off of my phone but the 200 songs that i do not want stay on there. I turned off the