Using Dreamweaver ftp for file upload to host question

My local site is set up with links relative to the root document.
The local root folder is defined as J:\xampp\htdocs\rootfilename\
I have not put anything in the field HTTP Address so it just shows http://
Once I have defined my remote site in the Dreamweaver setup I still have concerns regarding how dreamweaver will treat some of the links in my localhost testing environment, I have changed some of the relative links to fully qualified paths such as :
http://localhost/rootfilename/filename.php
So my question is when i do the file transfer how does dreamweaver treat these full links, will it change localhost to the new host name, and the root directory name to the root directory name automatically for me (obviously after i have defined them in the remote site setup)?
And what about my file path names such as my includes files which I have had to make a full path for example:
include_once ("J:/xampp/htdocs/rootfilename/includes/filename.inc.php");
Will Dreamweaver remove the J:/xampp stuff and give it the correct fully qualified path?
Thank you in advance for your help, I just want to make sure everything is set up right before I start the transfer.

No DW will not update absolute paths in your code. Absolute paths will remain exactly how you've typed them on upload.

Similar Messages

BI IP --- Planning function for File Upload

Hai All,
In BI IP , When I am trying to load the data (text file) by using Planning function for File Upload. I am getting an error message When I am clicking on Update .
Error Message : Inconsistent input parameter (parameter: <unknown>, value <unknown>).
In Text file I am using Tab Separation for each value
Anyone help me out.
Thanks,
Bhima

Hi Bhima
Try one of these; it should work:
1. If you are on SP 14 you would need to upgrade to SP 15. It would work fine
2. If not, then -
a] apply note 1070655 - Termination msg CL_RSPLFR_CONTROLLER =>GET_READ_WRITE_PROVIDS
b] Apply Correction Instruction 566059 [i.e: in Object - CL_RSPLFR_CONTROLLER GET_READ_WRITE_PROVIDS,
delete the block: l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = p_infoprov ).
and insert block - l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = i_infoprov ).
Goodluck
Srikanth

Using Resource type in Netweaver 7.1 for file upload

Dear All,
I want to check the file extension and file size before uploading it through a file upload UI element in Web Dynpro 7.1.
How to go about it? And I am using following code for image upload. Is it correct one?
IWDResource photoData = wdContext.nodePhotos().getPhotosElementAt(i).getPhotoData();
FtpURLConnection myConnection = new FtpURLConnection(myUrl);
myConnection.connect();
OutputStream out = myConnection.getOutputStream();
int temp = 0;
InputStream text = photoData.read(false);
while((temp=text.read())!=-1)
        out.write(temp);
out.flush();
out.close();
myConnection.close();
Kindly help.
Regards,
Amey Mogare

Did you check [this|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71] one?
Bala

URGENT! File Upload Utility or a Custom UI for File Upload is needed!

Hi all,
I'm trying to find or develop a file upload utility or custom user interface rather than editing and adding file type item to a page. There is a free portlet for file upload in Knowledge Exchange resources, but it is for 3.0.9 release. I'm using portal 9.0.2.
I could not any sample about the new release. Also API such as wwsbr_api that is used to add item to content areas is out dated.
I create a page with a region for "items". When "edit" page and try to add an "file" type item the generated url is sth like this;
"http://host:7779/pls/portal/PORTAL.wwv_additem.selectitemtype****"
After selecting item type as a simple file autogenerated url is sth. like ;
"http://host:7779/pls/portal/PORTAL.wwv_add_wizard.edititem"
I made search about these API but could not find anything (in PDK PL/SQL API help, too).
I need this very urgent for a proof of consept study for a customer.
Thanks in advance,
Kind Regards,
Yeliz Ucer
Oracle Sales Consultant

Answered your post on the General forum.
Regards,
Jerry
PortalPM

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

No of Columns limitation for file upload APEX 4.1

Hi,
I am using apex 4.1 file upload wizard to upload csv data.My csv file contains 58 columns that i have to insert into table.
when i proceed with the wizard and inserted records into the table. only first 46 records has been inserted.
Also, data\table mapping form also shows only 46 columns for column mapping.
Is there any column limit to file upload?
Can you help me on the same?

Hi Frank,
Yes you are right, the number of columns (through data upload feature) is limited to 46 columns.
Regards,
Patrick

Hello ! pls give some ti[ps how to use bapi's for data uploading?

hello !
pls give some ti[ps how to use bapi's for data uploading?
regards,
Arjun

Hi,
See the below report extract:
where it_data is having uploaded data.
LOOP AT<b> it_data</b> INTO wa_data.
    line_count = sy-tabix.
    "Date Validation
    CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
    INTO wa_data-uplft_date.
    "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
    LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
      IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
        MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
        APPEND wa_ekko TO it_ekko.
      ENDIF.
    ENDLOOP.
    "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
    LOOP AT it_ekko INTO wa_ekko.
      wa_data_header-pstng_date = wa_data-uplft_date.
      wa_data_header-doc_date = sy-datum.
      wa_data_header-bill_of_lading = wa_data-bill_of_lad.
      wa_data_header-ref_doc_no = wa_data-del_no.
      CONCATENATE wa_data-header_text1 '-'
                  wa_data-header_text2 '-'
                  wa_data-header_text3 '-'
                  wa_data-header_text4
                  into wa_data_header-HEADER_TXT.
      IF wa_data-indicator = 'Y'.
        wa_data_item-material = '000000000000200568'.
      ELSE.
        wa_data_item-material = '000000000000200566'.
      ENDIF.
      LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
        "Collect Item Level Data
        wa_data_item-plant = '1000'.
        wa_data_item-stge_loc = '1001'.
        wa_data_item-move_type = '101'.
        wa_data_item-vendor = wa_data-vendor.
        wa_data-qnty = wa_data-qnty / 1000.
        wa_data_item-entry_qnt = wa_data-qnty.
        wa_data_item-po_pr_qnt = wa_data-qnty.
        wa_data_item-entry_uom = 'KL'.
        wa_data_item-entry_uom_iso = 'KL'.
        wa_data_item-orderpr_un = 'KL'.
        wa_data_item-orderpr_un_iso = 'KL'.
        wa_data_item-no_more_gr = 'X'.
        wa_data_item-po_number = wa_ekpo-ebeln.
        wa_data_item-po_item = wa_ekpo-ebelp.
        wa_data_item-unload_pt = wa_data-unload_pt.
        wa_data_item-mvt_ind = 'B'.
        APPEND wa_data_item TO it_data_item.
        CLEAR wa_data_item.
      ENDLOOP.
      CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
        EXPORTING
          goodsmvt_header = wa_data_header
          goodsmvt_code   = goodsmvt_code
          testrun         = 'X'
        TABLES
          goodsmvt_item   = it_data_item
          return          = return.
      READ TABLE return INTO wa_return WITH KEY type = 'S'.
      IF sy-subrc <> 0.
        DESCRIBE TABLE return LINES sy-tfill.
        IF sy-tfill = 0.
          CALL FUNCTION <b>'BAPI_GOODSMVT_CREATE'</b>
        EXPORTING
              goodsmvt_header = wa_data_header
              goodsmvt_code   = goodsmvt_code
              testrun         = ' '
            TABLES
              goodsmvt_item   = it_data_item
              return          = return.
          CALL FUNCTION <b>'BAPI_TRANSACTION_COMMIT'</b>
           EXPORTING
             WAIT          = 'X'
          IMPORTING
            RETURN        =
        ENDIF.
      ENDIF.
      LOOP AT return INTO wa_return.
        WRITE: 'Messsage TYPE ', wa_return-type,
              /,'ID ', wa_return-id,
              /, 'Number ', wa_return-number,
              /, 'Message ', wa_return-message,
              /, 'Long Text ', wa_return-message_v1,
                                wa_return-message_v2,
                                wa_return-message_v3,
                                wa_return-message_v4,
             /, 'Failed at line', line_count.
      ENDLOOP.
      CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
    ENDLOOP.
Reward if useful!

Prefer HTTP or SOAP Adapter for file upload

Hi,
I have the following scenario:
Data (about 50 MB) is sent to PI and should get uploaded as file to a third party system.
I don't want to the use the File Adapter as I would have to use the FTP protocol and then have to install a FTP server.
On the third party system exists already a Web service for uploading files (in this case I would take the SOAP Adapter).
Another possibility would be to transfer the data with the HTTP Adapter.
My question is what are advantages and disadvantages of transferring the data to the third party system with the HTTP Adapter and respectively with the SOAP Adapter.
Thanks and regards
Patrick

Hi,
thanks for your answer, but most of threads say only that SOAP Adapter is for communication with Web services and HTTP not.
I know this already and in my case I can use both Adapters for the same task and want to know which I should choose in this case.
Like which one is maybe faster, more reliable, practicable , better for large files...
Regards
Patrick

Using BAPI functions BSP file upload

Hello,
Can anyone clarify me that ' can I upload a file form front end using BSP to the BP as backend to store e the image using the BAPI functions. All this is to get each BP photo in the Solution manager.
or I have use the datasets for the file upload. Please help me out.
With best regards,
Suneetha

Hi,
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
Upload graphics on
The program RSTXLDMC can be used to upload graphics (file extension .tif on PC files) into individual standard text.
<b>ws_upload</b>
Transfer files from the frontend to the application server.
Rgds,
Prakash

I have been using DREAMWEAVER MX for almost ten years to keep a website up-to-date. Can I switch to iWeb now to do the job, and if so, how do I go about it?

With MacOS 10.7 looming on the horizon, using veteran software DREAMWEAVER MX any longer does not seem to be such a good idea. I would like to use an editor that can cope with the new MacOS. Is iWeb that editor?
Specifically, I need some clarity on these issues:
Can I switch to iWeb now to create and publish content in my old website for which I have been using DREAMWEAVER MX?
Can I use the html layout I have been using in DREAMWEAVER, or do I have to steel myself for drastic changes?
How do I import the complete website into iWeb – if at all?

If you switch to iWeb you will have to build the site from scratch since iWeb can't read or import html files. Also since the future of iWeb is a little uncertain as to if it will be continued to be supported by Apple it might not be the best move at this time.
You might look into upgrading to Dreamweaver for Mac.
OT

Creating Progress Bar for File Upload

Hi, I'm trying to implement a progress bar indicator for a file upload in WebDynpro, without very good results.
I'm using a fileupload UI element, a TimerTrigger and a ProgressIndicator UI elements for this purpose.
It seems that using the fileupload UI element the iview is locked during the file upload, and therefore it prevents for the timer triggered action to be performed (this action updates the progress bar).
Additionally I havent been able to capture the transfered bytes from the upload. Maybe I'm using the wrong elements?
How could I achieve this. Has anyone done it?
I would really appreciate all the help I could get.
Homer Vargas

Hi,
Can anyone please tell me the way to upload file from client system to server.
The code i have is as follows:-
Jsp:-
function saveImage(){
     //projectname.javafilename
     var strStatus = "save";
     document.saveImageForm.action="/irj/servlet/prt/portal/prtroot/TestXML.TextImageLink?frmstatus="+ strStatus;
     document.saveImageForm.method="post";
     document.saveImageForm.submit();
<form name="saveImageForm" encrypt="multipart/form-data">
<table width="388" cellpadding="1" cellspacing="1" bgcolor="#F0F0F0" border='0'>
     <tr>
             <td><font color="blue" face="verdana" size="2">IMAGE:</font></td><td><input id="image" type="file" name="image" value=""/></td>
     </tr>
<tr>
     <td><input type="submit" name="submit" value="Submit" onclick="saveImage();"/></td>
     </tr>
</table>
</form>
now i am not getting what to write in java file
using IPortalComponentRequest.
Using the jsp file upload in tomcat is working but here it is not working
please help meee
Thanks in Advance
Regards
Sirisha

Error handling for file upload

HI Experts,
I have a question on file upload process in sap MDG-S.
Scenario : Upload the content from a CSV file using the file upload prcoess.
Query : For example if there are 5 records in the file and if there is an error in 3rd record what happens to the rest of the records i.e. 1,2 and 3,4.
a) Will record 1 and record 2 get posted and record 3,4 will be failed?
b) All 4 records will not be posted as there is one errored record.
Regards,
Charita.

Hi charitha,
As per your request if there is a error in any of the record in a particular file it does'nt loads any of the fields to the target, it will be terminated with an error.
As i checked with an example of Space delimited file in which 4th field has no spaces, and i used this file as source and run the job it does'nt return any values but terminated with an error.
let me know if i am right..
Regards,
Amjad

Need help for file upload - reposted for Steve Muench

Hi Steve,
I have been involved developing a web application that requires a file upload operation. I have studied your example on Upload Text File and Image Example in the Not Yet Documented ADF Sample Applications section. I got the file upload part worked but could not get the original file name to populate the name field..i.e. if I upload myFile.txt to the database, the name field will be myFile.txt (not the name enter by user). Is there a way to capture the filename info? or is it possible to do so within ADF framework? I am using ADF/Struts/JSP with ORDDoc data type. Thanks very much.
Bill

Hello Nani,
You need to change any settings in 'FILE' transaction. This transaction is used to set up Logical file paths. ( In general it will be set already for your system).
You can use the following code.
DATA: LC_LOGICAL_FILENAME_EXPSRC LIKE RCGIEDIAL-IEFILE
                                                VALUE 'EHS_IMP_SOURCES'.
DATA:      L_EMERGENCY_FLAG            TYPE C.
DATA:      L_FILE_FORMAT               LIKE FILENAME-FILEFORMAT.
data : X_RCGIEDIAL LIKE RCGIEDIAL occurs 0 with HEADER LINE.
read the default pathname on application server
    CALL FUNCTION 'FILE_GET_NAME'
         EXPORTING
            CLIENT                  = SY-MANDT
              LOGICAL_FILENAME        = LC_LOGICAL_FILENAME_EXPSRC
              OPERATING_SYSTEM        = SY-OPSYS
            parameter_1             = ' '
            PARAMETER_2             = ' '
            USE_PRESENTATION_SERVER = ' '
            WITH_FILE_EXTENSION     = ' '
            USE_BUFFER              = ' '
         IMPORTING
              EMERGENCY_FLAG          = L_EMERGENCY_FLAG
              FILE_FORMAT             = L_FILE_FORMAT
              FILE_NAME               = X_RCGIEDIAL-IEFILE
         EXCEPTIONS
              FILE_NOT_FOUND          = 1
              OTHERS                  = 2.
    write :/ 'file format', L_FILE_FORMAT,
           / 'file name', X_RCGIEDIAL-IEFILE.
Thanks,
Jyothi

Difficulties in creating a JSP for File upload

hello out there,
im trying to create a ProcessUpload.jsp File which should handle a file upload from a channel in the portal. regarding a previously posted thread acording to fileupload i deployed this jsp-file in the regular webServerHierarchy so that you dont have to go into the desktopServlet Portal, which cant handle fileUpload.
its location is this ../portal/test/ProcessUpload.jsp and it uses CustomTags referecens from /portal/WEB-INF/test.tld. i customized the deployment descriptor in /portal/WEB-INF/web.xml as well. but as soon as i try to put a taglib which uses this custom tags the server responses with an error.
does anybody know how to deploy a global jsp file to handle file uploads, or something in particular how to deploy jsp with custom tags outside the desktopservlet but inside the portal webapp??
i would be really thankful ;-)
best regards
martin

hi alex,
i allready tried to realize a channel with file upload download. channels are made up of jsp pages and when i am forwarding my form with enctype="multipart/form-data" encoding the desktop-servlet intercpets my entity-body.
so what kind of channel you have thought about ??
thanks for reply ;-)

NFS or FTP for file on Ip 10.x.y.z

Hi Experts,
I have a file to file scenario up and running.I have tried using NFS posted the files on XI server usr/sap/server/test/source.xml
Now they want to see it picked up and dropped to a particular folder on a particular IP
do i use NFS or ftp?
what are the pre requisites?...ne blog?

Hi,
>>can u pls explain what is this mounting?
Mounting is equivalent to creating a map drive in Windows.
To know more about mounting check this page http://www.techotopia.com/index.php/Sharing_Ubuntu_Linux_Folders_with_Remote_Linux_and_UNIX_Systems
>>If i use ftp..what do i use for port?
he standard port for FTP communication is port 21. Also you can check this link http://www.zephyrcorp.com/unix-ftp.htm
I will suggest you to do some google and find it out yourself. You will get lot more of information on these
Regards
suraj

Using Dreamweaver ftp for file upload to host question

Similar Messages

Maybe you are looking for