Using DVD-R as backup for data

I thought I could use a blank DVD-R disc as backup for data/files, as I've done with blank CD's in the past. However, loading a blank DVD just starts iDVD and I can't figure out how to transfer files, plus there is no disk icon on my desktop. I'm sure this is a real beginner question, but I just got my iMac. Thanks, David

Hi David
First thing you need to do is change your preferences so that the DVD mounts on the desktop. Open System Preferences by click the Apple menu in the top left corner of your screen and selecting "System Preferences..."
The select the CDs & DVDs pane in System Preferences. You can change the "When you insert a blank DVD" option to "Ask what to do". You can now close System Preferences
The computer will then ask what you would like to do when you insert the blank DVD, selecting "Open Finder" will mount the DVD on the desktop.
Hope this helps
J.C

Similar Messages

HT201250 can a time capsule be used as just a backup for data without being connected to a home network?

This is the explanation for my my question about whether a time capsule can be used as a backup without being connected to a network. I had to disconnect my time capsule when I upgraded my landline to a wireless home phone in order to go to a wireless security system that would work with my 2WIRE router. The time capsule blocked the usage of my camera on my security system, not allowing the camera to connect to the 2WIRE router. Once I disconnected the time capsule, the camera was able to connect wirelessly to the 2WIRE.

Welcome to Apple Support Communities
See > https://discussions.apple.com/message/16717724#16717724
As you can read, you can do what you want. You just have to set up the Time Capsule network in AirPort Utility without connecting it to the router and ignoring the messages, and connect to the Time Capsule network. You will have to switch between the Time Capsule and the other router's networks

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

RAID1 Partitions disappeared when one of the mirrored HDD is used as an external drive for data rescue.

Hi, I have mirrored build of two identical 1TB HDD in my Xserve Late 2006 (RAID 1) in Bay 2 and Bay3. When I took one HDD out and connected it as an external drive to my MacBook Pro, only the first partition appeared. That is, for instance, I have RAID partition A1, A2, A3 in Xserve but only A1 appears when the drive is connected to MacBook Pro as an external drive. Is there any way to let partition A2, A3 appear too? Thanks.

Oh, I didn't realise you were using the hardware RAID card for this. In that case, yes, that makes sense, you won't see the other partitions because they're handled by the RAID card. I admit I'd never tried it with a RAID 1 mirror where you might expect to - I've only used RAID 5 on the hardware cards where there's no expectation, of course, to pull a drive to relocate the data.
So you may ask why not just use a single partition for my RAID1 design. The reason is that I prefer to partition HDD because it is good for HDD lifespan. I don't like to design my parition schema to be just a single big parition with 1T Hard Drive since all data are going to be stored scattered and hence, taking longer for spindle reading.
I don't agree with most of this statement. I've not seen anything that indicates partitioning improves lifespan - for any given data, the disk spins the exact same number of times, and the heads move the same number of times, regardless of the partitioning - partitioning is only a logical, not a physical, construct.
As for the data being scattered and spindle latency, that's nowhere near the problem it used to be in the past thanks to faster spindles and larger caches. In addition, Mac OS X uses a dynamic reallocation/fragmentation system that automatically (re)allocates files as they're used, meaning you don't have the level of fragmentation that you used to have.
The primary benefit of partitioning is to restrict file system sizes so that you don't get a runaway proceess filling up the entire disk. Even that is less of a problem - when an 8GB drive was large it didn't take much to fill it, but you'd have to have a pretty rampant process to fill up a 1TB drive before alarms started ringing.

Using old file system backup for Cloning

I have taken an off-line backup of Oracle 11i (11.5.10.2) 15 days ago. Before taking backup of file system , I verified that all the latest Rapid Clone Patches are applied. No changes or patch work in APPL_TOP or DB has been done since that backup. Now I need to do cloning of this instance, how I can use this backup for Cloning.
Rapid Clone scripts create and generate some files/directories so I am not sure whether my Old backup of file system will work or not. What is the best way to use old backup for cloning , also what are the file and directories in addition to the old backup of file system which I need to copy to Target System.
Thanks for reviewing and suggestions.
Samar

Samar,
If you have run preclone before backing it up, your backup should be valid for cloning.
2.1 in the cloning doc has to be in the backup.
These doc's should clear out yours doubts on cloning.
Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
FAQ: Cloning Oracle Applications Release 11i
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1

Using CVS in SQL Developer for Data Modeler changes.

Hi,
I am fairly new to SQL Developer Data Modeler and associated version control mechanisms.
I am prototyping the storage of database designs and version control for the same, using the Data Modeler within SQL Developer. I have SQL Developer version 3.1.07.42 and I have also installed the CVS extension.
I can connect to our CVS server through sspi protocol and external CVS executable and am able to check out modules.
Below is the scenario where I am facing some issue:
I open the design from the checked out module and make changes and save it. In the File navigator, I look for the files that have been modified or added newly.
This behaves rather inconsistently in the sense that even after clicking on refresh button, sometimes it does not get refreshed. Next I try to look for the changes in Pending Changes(CVS) window. According to the other posts, I am supposed to look at the View - Data Modeler - Pending Changes window for data modeler changes but that shows up empty always( I am not sure if it is only tied to Subversion). But I do see the modified files/ files to be added to CVS under Versioning - CVS - Pending Changes window. The issue is that when I click on the refresh button in the window, all the files just vanish and all the counts show 0. Strangely if I go to Tools - Preferences - Versioning - CVS and just click OK, the pending changes window gets populated again( the counts are inconsistent at times).
I believe this issue is fixed and should work correctly in 3.1.07.42 but it does not seem to be case.
Also, I m not sure if I can use this CVS functionality available in SQL Dev for data modeler or should I be using an external client such as Wincvs for check in/ check out.
Please help.
Thanks

Hi Joop,
I think you will find that in Data Modeler's Physical Model tree the same icons are used for temporary Tables and Materialized Views as in SQL Developer.
David

Using the Edit definition feature for data controls in Jdeveloper 11g

Hello,
I am using Jdeveloper 11g 11.1.2.3.0.
I have some data controls used in my application. Initially they were pointing to lab now it has been changed to development.
I need to change the wsdl urls' for each data controls. I used edit definition feature in each data controls and copy pasted the new urls. But this does not seem to work.
Is this the right way of doing it or is there any other way to accomplish this?
Thanks in advance,
Sal

Hi,
choose Application Resources (iAccordion in Application Navigator) --> ADF META-INF --> Open and Change connections.xml
Frank

Using Nokia 1200 CA45 connection for data transfer

I have a USB CA45 connector but am unable to connect my 1200 to PC for data transfer. Is this simply because this entry level phone is not able to connect to PC. If so why does it have a CA45 connector installed?
Any help or advice appreciated
ottoman62

About my problem above, i followed the process below which is written in the user guide :
"So that you can use a connection by cable, a pilot of cable of data USB must be installed on your PC. You can use the Transfert functionality of data without installing of pilot of cable of data USB. Select Menu > Connectiv. > Câble USB. You can connect your apparatus to a compatible PC using a cable of data USB.
Connect the cable of data USB on the basis of the apparatus. To
change the type of equipment that you normally connect to your
apparatus using the cable of data, support on the joystick. [...]
Transfer of data - Reach data such as audio or photo files on your computer and transfer them since this one by using a connection by cable of data. To use the Transfer mode of data, take care not to select the type of connection USB in
the parameters Manage connections of Nokia PC Continuation. Insert a memory board in your apparatus, connect this one to a compatible computer using the cable of data USB and, when the apparatus you request to indicate the mode used, select Transfert of data. In this mode, your apparatus plays the part of peripheral of storage of mass and, on your computer, it seems a removable hard disk."
The USB cable used is a Nokia device.

Using smart phone as backup for uverse being down

My AT&T Uverse home dsl service was being upgraded yesterday and and something went wrong. Now my service is completely down and we'll be for the next few days. Would AT&T wireless let me use my AT&T cell as a backup without charging ne for the extra data I usa? The tech from uverse thought they would credit me. I have a ticket number to show my service is down.

I wouldn't depend on it unless you get it in writing from AT&T wireless. This is a user helping user forum. For an answer to your question, you need to private message with your account and contact information. If they approve the credit, you should be OK. I wouldn't depend on the word of a tech.

Using gmail as a backup for Z30 contacts

If I open a Google account and get a gmail address, will it backup (sych) my Contacts (1,800) that are already on my Z30, or will I have to re-enter them after setting up a gmail address....thanks!

Here's what I'd do if it were me. Create a new Outlook.com account then proceed with the following:
Create a new Outlook profile on your PC. Might as well set up a profile that goes to the new Outlook.com address while you're at it, but you don't have to.
Plug in the device.
Open Link
Click on the gear icon at the upper right.
Then at the bottom you should see two "tabs." One will be your computer name and the other should say "BlackBerry-XXXX" Click on the BlackBerry-XXXX tab.
Make a full backup of the device. You never know, anything can happen with tech and you want to be able to restore if you have to.
Under Synchronization click on Configure. Choose the profile you created for the Outlook.com address. Again, the profile doesn't have to be connected to the Outlook.com account if you don't want it to. It can be just a blank account.
Check the box for Contacts and uncheck for calendar (nless you want that data too).. Configure the sync for "1-Way Sync to Your Computer."
Once the data is in Outlook then export the contact to a file that you can import into Outlook.com.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

?? re using IPOD Classic as backup for photos while away on vacation

I bought an 80GB IPOD Classic primarily as a backup storage device for photos while away for 3 months. I have copied about 4 g of songs onto it (using my main computer and ITUNES) and now plan to use it to back up photos using my Laptop (which doesn't have ITUNES on it).
I realize that I don't want to use the ITUNES Photo Sync as I will be using it on two computers and it will erase and sync the new photo files so I plan to copy and paste the files in using Windows Explorer. I've done a couple of tests and all seems fine - using Explorer I copy Pictures Folders into the IPOD and I can see the files, open them, delete them, etc - and they're the correct size.
My question is this - I can't seem to "see" the photo files on the IPOD itself - when used as a storage device can you not see the photos? Is there another menu I can't find?
Also - I checked off the "Enable Disk Use" and "Full Resolution" in ITUNES - maybe that's not necessary as I'm not using ITUNES for the photos?
Thanks for any help

*I can't seem to "see" the photo files on the IPOD itself - when used as a storage device can you not see the photos? Is there another menu I can't find?*
You can't "view" anything on your screen that is added to the iPod when using it as a storage device, in the same way that you can't play songs added in that mode either. You can only access those files through Windows Explorer (or Finder on a Mac), you can only view or play anything added through iTunes.

Using TCP or shared variable for data transfer

I am trying to send a large amount of numbers from a real-time module to a host computer. These numbers have been arranged into a large array, such as an array with 10s of thousands of points. The time critical portion of getting the information has already been done, so the data transfer back to the host VI is not time critical. I know I will need to break the large array down into smaller arrays and then reform the large array after all the information has been sent. I know how to use both TCP and shared variables with FIFO. What I am unsure of is which one is better to use for this application. I do not know what the maximum size arrays I can send through either.
Also, from what I have gathered from using LabView is that the sender has to be listening for a connection before the client opens a connection, or else it will throw an error. When I tried breaking it down into 50 points, if i did not wait long enough in the host VI or if I did not put a long enough wait function in the RT loop, and error would throw, so it would take a long time to transfer the data when it worked properly.
Any help or suggestions is appreciated, thanks.

Regarding the array size question, there is no real limit (other then the amount of memory in your system) to the size of data that you can transfer in a single block using either TCP or the Shared Variable. In your case you can easily transfer an array with 10's of thousands of data points in a single write operation. Both TCP and the Shared Variable will automatically handle breaking up the data for the maximum packet size on Ethernet and then reconstitute the array on the receiving end. In LabVIEW you will simply get back the array as a whole without needing to worrying about how the data is broken into smaller packets on the Ethernet.
I tested the attached example which transfers 400kB per block (50000 Doubles) without any problems. You do need to have the Server (in this case RT) running first before the client (Windows) can connect.
Message Edited by Christian L on 02-09-2007 11:34 AM
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
Attachments:
TCP.JPG ‏44 KB

Using MEREQ001 u2013 Checking error for data in customer data tab.

Hi Guys,
I have implemented MEREQ001 enhancement to add custom field in CUSTOMER DATA tab at item level. I want to validate the custom fields for error and display RED dot in front of the line item number when user press SAVE button.
I am using EXIT_SAPLMEREQ_005 for validating the custom field when user press SAVE button.
Is this the correct exit for this requirement.
Can somebody share to code to display the RED dot in front of the line item which has error in custom fields?
Thanks in advance.

I think it's right
U need to tranfer the message to exporting parameter or raise an error message

Mail.app using Day of the Year for date stamps. Whaaaat?

Here's a new one, for me anyway:
It seems all of my emails in the mail.app have suddenly been stamped with dates that use the day of the year, rather than day of the month, i.e:
37 February, 2011, instead of 6 February, 2011.
This date format appears in both the Viewer Window and Message Headers, and is seen in both sent/received dates, on all saved/new messages (all the way back to a few from 2001) and in both of the mail.app accounts I use: one straight-up gmail, the other a worldshare.net address, also using the Gmail server.
This behavior is not present when reading through webmail, nor is it a problem on my iPod Touch.
Any thoughts?
Thanks.

It was all in Language and Text pref pane. I was pulling day of year, rather than day of month.
Big ups to ibook_Steve over at MacNN!

Using DVD-R as backup for data

Similar Messages

Maybe you are looking for