Using DVD-RAM in Mountain Lion

I was lucky enough to pick up some DVD-RAM discs at a bargain price, brand-new in wrappers and box. Frankly, though, I haven't got the slightest idea how to make the best use of them. I have a suitable DVD drive, that's not the issue. My primary use for these will be offline storage of important documents and files.
The first thing that's caught my attention is that I have to format them for use. Some reading around suggests UDF would be the best format to use, but this isn't available in Disk Utility. All I have are various versions of HFS, ExFAT and FAT. I own Toast Titanium 9, and I'm comfortable with the Terminal, which may open up my options. So:
1) Which format should I use to get the best speed and longevity out of these discs? How would I apply it?
2) Could I use an encrypted filesystem (eg. HFS Encryption) at all, and if so, without reducing the lifespan, or severely crippling the speed?
After that, I'm assuming I just write to the discs as though they were hard drives - adding, deleting, renaming, moving etc. at will - though mindful of the fact that the discs have limited re-writes available (these are 2-3x discs, though, which Wikipedia describes as having 100,000 re-writes in them, which is ample).
3) Have I got that right?
Thanks

never mind

Similar Messages

Did Apple Break HD-DVD Playback with Mountain Lion using Apple DVD Player?

First of all, kindly spare me the commentary about Blu-Ray beating HD-DVD. Agreed and not the question. I have perfectly good reasons for using HD-DVD and it works very well for my purposes.
I authored an HD-DVD in DVD Studio Pro 4.2.2. as I have done many times before on Snow Leopard, but this time on Mountain Lion. When I try to play the HD-DVD, either from the physical disk from a disk image, the menu appears, but when the play button is pressed, the menu stays on screen, but the player shows the timecode of the movie playing, but with no sound or picture.
Thinking that perhaps the menu got corrupted, I put the same HD-DVD into a MacBook Pro running Snow Leopard, and it played perfectly! Conclusion: Not a DVD Studio Pro problem.
Thinking that it might be DVD Player, I copied DVD Player 5.4 from the Snow Leopard MacBook Pro to the Mountain Lion MacBook Pro (which was running DVD Player 5.6), and the HD-DVD still had the same issue on the Mountain Lion MacBook Pro, under either of the DVD Player versions. Conclusion: Not a DVD Player issue.
The HD-DVD does mount and initialize, so it's not a hardware issue with the optical drive.
Conclusion: It would appear to me that it's an OS issue with Mountain Lion breaking (either intentionally or unintentionally), HD-DVD playback. Anyone know anything more about this issue? Anyone else saddened to see Apple turn into Microsoft circa 2005, and the MacOS turn into Vista? I haven't seen much of anything about it in the forums, which is why I'm posting it here.
Thanks Apple. I just spent the better part of 3 days transcoding and authoring this HD-DVD, only to have you screw it up for me 2 days before my film festival (the perfectly good reason for using HD-DVD). Kindly spare me the, "Why don't you encode a ProRes blah blah blah quicktime movie." Heard it all before.
I knew I would regret upgrading to Mountain Lion, and I do more and more each and every day as I continually find more things that it broke. Yet another reason to add to my list for downgrading to Snow Leopard. I'm up to about 30 of them. Or to abandon Final Cut for Adobe products.
Thanks and sorry for the rant, but I'm justifiably frustrated.

Update: The Apple Store in Nashua, New Hampshire replicated the issue on their own hardware, so yes, Apple did break HD-DVD playback with Mountain Lion (it does still work in Lion, they discovered). The Apple Store reported the issue to engineering, but the more people that report the issue, the more likely Apple will do something about it. Thanks Apple.

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

HT5444 I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?

I would like to use a copy of Mountain Lion for development, but the store tells me I cannot download it because my MacBook 4,1 is not compatible! What can I do to download it?
I have paid for it and all...

You can't do anything. See:
OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
Your computer does not meet the requirements to run Mountain Lion.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

hi there guys,
will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?
I'm not sure if my machine is 64 bit - it is the current model base mac mini.
Many thanks for any help you can offer !
Simon

SkiJumptoes is right. 4GB is not enough to comfortably run Logic X.
Your Mac Mini will need DDR3 SODIMM RAM. That website seems incredibly steep though. I guess that's the price of finding it for you. You're better off going to any below:
http://www.ebuyer.com/191206-kingston-4gb-ddr3-1066mhz-laptop-memory-kvr1066d3s7 -4g?utm_source=google&utm_medium=products&gclid=COqM6KzdxbgCFcfJtAodoicARg
http://www.ballicom.co.uk/cmso4gx3m1a1600c11-corsair-value-select--memory--4-gb- -so-dimm-204pin--ddr3--1600-mhz--pc312800--cl11--15-v--unbuffered--nonecc.p87434 0.html?ref=5&gclid=CKyej_HdxbgCFQSS3godEjwAug

Indesign cs6 menu and tool bar disappear between windows using mission control in mountain lion

heres 2 screen grabs before and after. while navigating between 'spaces' using mission control in mountain lion. issue - the menu and tools bars disappear - not all of them just parts of them. to get back i hit 'tab' button twice which hides and shows tools. very annoying - does anyone know of a fix or is this another bug which i have to live with. im using a macpro june 2012/running 10.8.4 and 2 screens - left for artboard - right for all tool windows.

thanks steve - yes that works as does using the tab key - all well....until i move to another 'space' and then come back again.
for example: my setup is like this - no2 space has indesign project. no3 space has photoshop. so im working on a page within indesign and i need to edit an image- i double click the pic and it opens in photoshop on the other 'space' save the file and go back to indesign to update pic and find menu/tools all over the place - so hit tab twice back to normal - until i 'move' out of that space into another - photoshop/ mail/ whatever - as i toggle between spaces the indesign menu will always be 'corrupt' for a better word. hope that makes sense.

In Finder , why i can't go back and forward using the trackpad in Mountain Lion?

In Finder , why i can't go back and forward using the trackpad in Mountain Lion?

Hi. I also got the same problem but just learnt a way to resolve it. No need for 3rd party software.
If you don't care much about the Three finger drag gesture, and just want to swipe between pages in Finder and web browsers, please follow these:
System Preferences/Trackpad/More gestures/Swipe between pages/Scroll left or right with 2 fingers. This option works solely for web browsers.
In order to swipe between pages in Finder, web browsers and other apps as well,change the option to Swipe with two or three fingers. (3 for Finder and apps, 2 for web pages)
If you also want to use Three-finger drag to move windows and drag-select:
The problem occurs once you change to "Swipe with 2 or three fingers", Lion will automatically disable/uncheck the Three finger drag function in Trackpad/Point&Click. Or the other way around, you tick Three Finger drag, Swipe between pages automatically switches to Scroll with two fingers because these 2 functions are overlapped.
My solution is:
stick with initial option Scroll with two fingers for navigating between web pages.
Re-tick Three finger drag in Point&Click.
Use combination: Option+Swipe 4 fingers for Finder and other apps (although it functions reversely, Swiping left to go backward, swipe right to go forward)
My current gesture routine:
- Swipe between web pages: Scroll with two fingers.
- Swipe between pages in Finder and other apps: Combination Option+swipe 4 fingers
- Swipe between full-screen apps (desktops): Swipe left or right with 4 fingers
- Drag select and navigate windows: Three finger drag
- Mission Control - Swipe up with 4 fingers. (avoid conflict with three finger drag)
* You can actually use combination Option+Swipe 4 fingers for everything (apps, finder, web pages) but I personally prefer swipe 2 fingers for web browsing. It's just easier and quicker and avoid conflicts with other gestures.
Hope this help.

I cannot use my firewall within Mountain Lion.

I cannot use my firewall within Mountain Lion. It means that when I click "Firewall" the button, the button becomes dark grey and do not show any contents below? why? I cannot see anything about my firewall.
it looks like this: “防火墙”means "firewall" I clicked this button it turns to be dark and nothing happen, I still in the page of 通用 “General ”

I am having the exact same problem. Were you able to solve it? I see that this question has been open since July last year.

When using time machine with external hardrive to backup, some music items from iTunes and some photos from iPhoto do not transfer to backup hardrive. What am I ding wrong? Using latest version of mountain lion.

When I use time machine with my external harddrive to back up computer, some music from iTunes library, and some photos from iPhoto library are missing when I check backup disk. I am using latest version of mountain lion. Am I doing something wrong?

First, Time Machine doesn't completely back up the iPhoto library while iPhoto is running. Make sure you quit iPhoto after making any changes to allow a backup to take place.
This simple procedure will clear your Time Machine settings, including both overt and hidden exclusions. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

Has anyone use camptune x with mountain lion even though says it does not support it yet

HAs anyone used camptune x with mountain lion even though it is not yet specific to moutain lion yet?

Tried it yesterday on my imac 21Jan 2013 running mountain lion 10.8.2, total disaster.
Backed up my boot camp image using winclone (great programme)
Purchased and ran camptune x and everything went fine.
Rebooted into windows 7 and recieved error messages find--set--root--ignore floppies--ignore cd/bootmgr
ERROR 15
Gave me a list of options on screen but none resolved the issue.
Booted back into winclone and used the backup image i had just created to reinstall on bootcamp.
Have emailed the company but have had no reply as yet
**** STAY AWAY until updated for mountain lion YOU HAVE BEEN WARNED ****

Since I use Mac os x mountain lion it is no more possible to share files with my pc windows 7. Does somebody know how to solve this problem?

Since I use Mac os x mountain lion it is no more possible to share files with my pc windows 7. Does somebody know how to solve this problem? I have been answered by an Apple technician that with the new Mountain Lion the problem was with Windows. I am not convinced.

I have renamed my pc and everything is ok with the file sharing SMB. Both my iMac and my pc can share files very easily.

Need Working Drivers for Macbook 2,1 running Windows 8 (64-bit) using Boot Camp 5 (Mountain Lion)

So I found my old Macbook 2,1 on Leopard the other day and decided to make it my dedicated Windows computer. I wanted to run Windows 8 on it, so I figured out I needed Boot Camp 5. Then I realized Boot Camp 5 only runs on Mountain Lion, so I went though the process up updating it (had to use MLPostFactor since it's techincally unsupported on my mac.) After getting it updated to Mountain Lion, I went and used Boot Camp 5 to install Windows 8 64-bit. However, when I try to load any Boot Camp Driver Files (I've tried the drivers for BootCamp 3, 4, and 5) it says it is unsupported on my computer model. I suspect this is because of the fact that Windows 8 shouldn't be on my computer. Without these files, I can't right click, among other things, which is pretty important. Can anyone help me get these drivers loaded?

According to the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your Macbook 2008 does not support Windows 8.
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD

How can I use apple remote with Mountain Lion? Any Front Row alternative?

Hi All,
I recently upgraded from Snow Leopard to Mountain Lion.
All great except for my Apple Remote control.
Before, I could effectively control my iMac media with Apple Remote by using Front Row (music, photos, videos, good integration with iTunes and iPhoto).
Now, as I understand, Front Row is expired.
So, my Apple remote still works but with very limited options (just music, forward, backward and volume), and it's a real pity.
Any of you Guys know how to restore Front Row?
Otherwise maybe suggest an alternative (sth similar, should allow iMac media control by Apple Remote)?
So far I tried to restore all Front Row files by a Time Capsule Snow Leopard backup (as indicatred on some other Communities).
To restore was easy, but then, no way to launch it.
Any advice will help!
Thanks in advance/all the best.
Marco

Thanks Klaus1 for your prompt answer, although I went again through a dated discussion.
I also got the feeling that somehow they want to push Apple TV..
But, respectfully speaking towards our Friends at Apple, is it fair to promise what you don't deliver?
I have choosen apple because I percive it's different.
At currently published link: http://store.apple.com/uk/product/MC377Z/A/apple-remote
they do promote the following:
Apple Remote with Mac
The Apple Remote gives you total command of your music, photos, videos and DVDs from anywhere in the room. It works with Front Row - a menu-based, full-screen interface - to make accessing the digital content on your Mac as simple as navigating your iPod. When you press the Menu button, your desktop fades and the sleek, Front Row interface takes its place, to give you control over your music in iTunes, your photos in iPhoto, the videos in your Videos folder and your DVDs. Turn up the volume. Shuffle. Skip to the next chapter on your DVD. Play a slide show, a home video that you made in iMovie, even a film trailer.
Compatible with Apple products introduced in 2005 or later that have a built-in infrared (IR) receiver. Not compatible with MacBook Pro with Retina display.
Cost for this is 15£ (19€).
Now, I have iMac and Mac Book Pro (no retina display) both with Mountain Lion installed, and I understand both of them are not compatible with Front Row.
Actually I adore apple tv and I got 2 at home nicely working on 2 different TVs.
So I accomplished twice their wish of selling this product to me.
Why shall they deceive me (and many others, as I read) by killing a still promised service?
Should I read all forums before buying a trusted-brand-product like apple, to ensure that id does what declared?
Don't get me wrong, I'm an enthusiast user of the whole apple family, since many years, and still I am.
Just politely complaining for this decision, which creates to Many an easy avoidable disservice.
Cheers
Marco

HP Officejet 6500 E709n all-in-one: how to print CD/DVD labels, on Mountain Lion OS?

My printer is an HP Officejet 6500 E709n all-in-one: how do I print CD/DVD labels, using MACBook Pro & Mountain Lion OS?
Thanks,
Jim
[Edited for Personal Information]

Hi there Jim, aka @jknud , welcome to the forums
I understand you're looking to print CD/DVD labels to your Officejet 6500 Wireless, from your Mac.
There are normally third party software programs you can download to print out whichever brand of labels you are trying to print on. If you wish to let me know which type of labels you are using, I will see if I can find their support forums for you.
Have a great Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Using DVD-RAM in Mountain Lion

Similar Messages

Maybe you are looking for