Using dynamic captions with checkboxes

Hello.
I want to create a list of checkboxes, according to a table I get from the context, meaning there would be as much checkboxes as the lines in the table, and their caption would be one of the table's fields.
I turned on Show Dynamic Properties.
First I tried it with one checkbox, with it's caption related directly to the table's field, and it worked - but with only one checkbox displaying the first line's value, of course.
Next I put the checkbox in a subform. The subform is related to the table line, and is repeated for every row, and now the caption is only bound to the field's name, relatively.
So the subform is repeated, but the caption doesn't change at all.
How can it be done?
And can I set the checkbox's caption by code? I tried, but it didn't work.
Best regards,
Udi.

Hi,
try using table control (supported in ALC 8.0) and add the checkboxe in the row.
You can then map your data node (structure) with the table.
Ashutosh

Similar Messages

Using Dynamic Visibility with Accordian Menu

Hiya. I am trying to use dynamic visibility with an accordian menu. My menu categories are years, 2005 - 2010. My categories items are key performance indicators such as abandon percentage, first call resolution, customer satisfaction percentage, call volume and average speed of answer.
Of my 6 KPIs, 4 display as percentages and 2 display as whole numbers. When the percentage graphs are displayed the axis labels needs to be percentages. When the whole number graphs are displayed the axis label needs to show whole numbers.
I thought to achieve this I should use dynamic visibility with two different line charts where one line chart shows percentages and the other line chart shows whole numbers. However I am strugging trying to make that happen.
Is my concept correct, or is there an easier way to accomplish this? If my concept is correct,can someone give me some advice on how to make dynamic visibility display the correct chart depending on which KPI I select from my accordian menu?
Thanks!

Hi
You can achieveby doing following steps..
Insert your categories into D3 and label bind to E3.
take two charts and bind to the destination data of Accordion menu
then write a formula in F3 like this =IF(OR(E3="abandon percentage",E3="customer satisfaction percentage"),1,0)
and bind your two charts to the F3 and set DV for % charts as 1 and # charts as 0.
I hope this will helps you
Thanks,
Srinivas Dandamudi.

Selecting multiple rows using column header with checkbox in it.

Dear All.,
I am trying to select multiple rows with checkbox in column header but it doesnot works...
Following is my codel
<af:table value="#{bindings.xx.collectionModel}"
                      var="row"
                      rows="#{bindings.xx.rangeSize}"
                      emptyText="#{bindings.xx.viewable ? 'No data to display.' : 'Access Denied.'}"
                      fetchSize="#{bindings.xx.rangeSize}"
                      rowBandingInterval="1"
                      filterModel="#{bindings.xx.queryDescriptor}"
                      queryListener="#{bindings.xx.processQuery}"
                      varStatus="vs" partialTriggers="sbcSelectAll sbcChkFlag"
                      selectedRowKeys="#{bindings.xx.collectionModel.selectedRow}"
                      selectionListener="#{bindings.xx.collectionModel.makeCurrent}"
                      rowSelection="none" id="tCdMast" width="400"
                      columnStretching="column:c4" inlineStyle="height:200px;">
              <af:column sortProperty="ChkFlag" filterable="true"
                         sortable="true"
                         headerText="#{bindings.xx.hints.ChkFlag.label}"
                         id="c2" width="55"
                         inlineStyle="#{row.ChkFlag ? 'background-color:#9CACC9;' : ''}">
                <af:selectBooleanCheckbox simple="true" value="#{row.ChkFlag}"
                                          selected="#{row.ChkFlag}" id="sbcChkFlag"
                                          autoSubmit="true" immediate="true"/>
                <f:facet name="header">
                  <af:selectBooleanCheckbox simple="true"
                                            autoSubmit="true"
                                            valueChangeListener="#{xxBean.onTableChkAllCheckChanged}"
                                            id="sbcSelectAll"/>
                </f:facet>
              </af:column>
</af:table>
Managed Bean
    public void onTableChkAllCheckChanged(ValueChangeEvent valueChangeEvent) {
        Boolean newValue =
            Boolean.valueOf(u.nvlString(valueChangeEvent.getNewValue(),
                                        "false"));
        Boolean oldValue =
            Boolean.valueOf(u.nvlString(valueChangeEvent.getOldValue(),
                                        "false"));
        if (newValue.equals(oldValue))
            return;
        int rowIndex=0;
        ViewObject vo = u.findIterator("xxIterator").getViewObject();
        vo.reset();
        while(vo.hasNext()){
          Row row;
          if(rowIndex==0)
              row=vo.first();
          else
              row=vo.next();
             row.setAttribute("ChkFlag", newValue.booleanValue());
          rowIndex=1;
        u.addPartialTargets(tableDocuments);
    }Please help!!.
Thanks & Regards,
Santosh.
jdeve 11.1.1.4.0

Can you check this sample in the blog post?
http://sameh-nassar.blogspot.com/2009/12/use-checkbox-for-selecting-multiple.html
Thanks,
Navaneeth

Using dynamic ViewLinks with JDeveloper 10g

Hello.
I'm displaing a list of data from tab1 with a sublist of data from tab2, which has a n:m cardinality relationship.
Attributes:
k1 - primary key of tab1
k2 - primary key of tab2
fk1 - foreign key of tab1 in rel
fk2 - foreign key of tab2 in rel
Before data iteration I create dynamic link using createViewLinkBetweenViewObjects(...) method of my ApplicationModule. I use assocClause parameter to define the way of the data association, e.g.:
select <attrs> from tab2 where k2 in (select fk2 from rel where fk1=:1)Parameter :1 is replaced with k1 from tab1.
This works fine, but whern I use parameter :1 more times in query, the JBO-27122 (SQL error during statement preparation. Statement: ...) is reported. I have used it with JDeveloper 9i and it worked properly.
Thanks for any help

Did you read my reply here:
Jdeveloper with PVCS

Problems using Dynamic parameters with Crystal Reports and SBO 8.8

Has anyone been able to successfully use a dynamic parameter in Crystal Reports with 8.8 using the Business One connector? When we try we get an additional logon to the database that pops up and the logon fails.
We need this because we want to return live lists of PO documents from the server for selection. We are also trying to use nested dynamic parameters, because we want to first return the PO document based on the PO number, and then chose specific rows based on a field value in POR1.
It works if we don't use the Business One connector, but then the report doesn't function properly inside of SAP.
Any ideas would be appreciated.

I have tried using tokens but they are too simple. I need something like a subselect where you first select one value and then another that is a subset of those values. Apparently the tokens can't even use a "where" clause.
SAP dances around Dynamic parameters, but won't come out and say that they can't be used with the B1 connector. If that is the case then they should just say so and stop wasting our time. Apparently Crystal is not truely interfaced with B1, just sort of hanging out with it.
I don't really care other than I have to do this select, subselect. If someone has a way to do that with tokens I would love to hear it.
Thanks,
Roy

Crashing while using dynamic linking with aftereffects

I've been using premier for a while now but i believe i've fond a huge flaw in the dynamic link system. I own a multi-million dollar corporation that specializes in researching the answer for X divided by Zero and this bug is setting us back thousands everyday.
The problem is when you import a Premier project into aftereffects and then import the same comp back into premier, the result is 8GB of ram wasted in a few seconds with both applications crashing. As you may have guess from our R&D type this sort of multiplication is unaceptable. Please fix.
Regards, Tom Tomson @ Banana Systems Ltd.

u mad bro?

Trying to use Dynamic Action with button - no #BUTTON_ID#

I saw this post: Issue with apex dynamic action
and I'm having exactly the same issue. I'm using the Blue and Tan Theme and the button's "normal template" looks like the following:
<table class="t2Button" cellspacing="0" cellpadding="0" border="0" summary="">
<tr>
<td class="t2L"><a href="#LINK#"><img src="#IMAGE_PREFIX#themes/theme_2/button_left.gif" alt="" /></a></td>
<td class="t2C"><a href="#LINK#">#LABEL#</a></td>
<td class="t2R"><a href="#LINK#"><img src="#IMAGE_PREFIX#themes/theme_2/button_right.gif" alt="" /></a></td>
</tr>
</table>Can someone help me get the #BUTTON_ID# tag in the correct spot?
(PS. This application was originally built using APEX 3.2 and upgraded to 4.1. Don't know if that matters or not.)

The button calls a procedure which can take several minutes to complete. It calculates and stores values for display. I'd like to open up a modal window so that the user has more concrete feedback that the calculation process is underway. I'd also like to tie it to the refresh of a particular region on the page that shows a list of the stored calculations.

Multiple row selection in ADF Table using addition column with checkbox

I am using ADF table(Jdeveloper11g) and i want to selecte multiple rows it may be more than one OR all rows.
For that i added one Column to the table with Header Delete and checkbox
<af:table....
<af:column sortProperty="Delete" headerText="Delete" width="100"
sortable="false">
<af:selectBooleanCheckbox label="#{row.favoriteId}"
valueChangeListener="#{Mybean.onCheck}"
id="checkbox" autoSubmit="true">
</af:selectBooleanCheckbox>
</af:column>
</af:table>
backing bean:Here i added code to get Value of one column with id favoriteId and use an arrayList(listForDelete) to monitor the state of the checkboxes
public void onCheck(ValueChangeEvent valueChangeEvent) {
BindingContainer bindings = getBindings();
DCBindingContainer dcBindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding iterBind =
(DCIteratorBinding)bindings.get("getUserFavoritesByUserIDIterator");
if (iterBind != null && iterBind.getCurrentRow() != null) {
RichSelectBooleanCheckbox ch = (RichSelectBooleanCheckbox)valueChangeEvent.getSource();
if (!ch.isSelected()) {
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.add(issueId);
else
Long issueId = (Long)iterBind.getCurrentRow().getAttribute("favoriteId");
listForDelete.remove(issueId);
Problem is that when i select single row checkBox, onCheck() method of backing bean gets called multiple times(equals to the number of rows)
I think this is beacuse of <af:selectBooleanCheckbox id is same that is "checkbox" but i am not sure.Even i tried to assign some unique id but no any success in assigning Id with value Expression.
I also find related post
Re: ADF Table Multiple row selection by Managed Bean
but that is related to Select All rows or Deselect all rows from table.
From the simillar post i follow the steps given by Frank.but problem with below step
->have an af:clientAttribute assigned to the checkbox with the following EL #{row.key} ,here I added <af:clientAttribute name="#{row.key}"></af:clientAttribute> and i am getting error
Error(64,37): Static attribute must be a String literal, its illegal to specify an expression.
Please let me know if any one had already implemented same test case.
Thanks for all help
Jaydeep
Edited by: JaydeepJ on Aug 7, 2009 4:42 AM

just to update after the rollback is called in the cancel button i wrote following code which does not change the row focus to the first row
DCBindingContainer bc =
(DCBindingContainer)BindingUtils.getBindingContext().getCurrentBindingsEntry();
DCIteratorBinding profItr =
bc.findIteratorBinding("ProfileSearchInstIterator");
Row cRow = profItr.getRowAtRangeIndex(0);
if(cRow != null){
System.out.println("Current row is not null so fixed ");
profItr.setCurrentRowIndexInRange(0);
RowKeySetImpl rks = new RowKeySetImpl();
ArrayList keyList = new ArrayList();
keyList.add(cRow.getKey());
rks.add(keyList);
profileTable.setSelectedRowKeys(rks);
AdfFacesContext.getCurrentInstance().addPartialTarget(profileTable);
}

Using dynamic elements with FMS/FMSS/FMIS...can I do this?

Hello all,
Here's an elaboration on the general title of this post:
On one page of my website, the user has a large selection of videos they can choose from.
They select one, clicking the link
This opens a new page (with the player built in?) and plays the video.
NOW...
Can I retrieve the data from a query string (the video filename selected from the previous page) and then place it in the action script using PHP (echo) so that I don't have to have separate applications for each video? or do I have to have separate SWF/applications for wach video?
I'm still way new to this so I apologise if the question isn't clear enough. I'll gladly elaborate where I can.
Many thanks!!!
Sincerely,
wordman

SE,
This looks great!!! Let me ask you this: Is there any problem saving my page with the player as .php as opposed to .html? I have a number of dynamic aspects to my web pages that I want to maintain.
You really are an asset to this forum. thank you and all of the great contributors here so very much!
Sincerely,
wordman

How can I use closed captioning with Netflix movies?

Any help from the community on how to be able to see closed captioning on Netflix movies; works with movies from iTunes?

Hm, Id really like to figure this out also. It bothers me to see my laptop screen out of the corner of my eye using my 30in. Its kind of stupid but, still bothers me.
edit: That was way to easy. Just close the laptop and let the bluetooth mouse wake it back up. I had tried it once before and it didnt work. Maybe I was just to impatient to wait the extra 10 secs.

Using dynamic DataSources with WL 6.1

Hi All,
Here is an example of how to create, use and delete
JDBC DataSources dynamically using JMX and WL 6.1.
Regards,
Slava Imeshev
[DynamicDataSource.java]

Hi Srinivas,
"Srinivas Chennamaraja" <[email protected]> wrote in message news:[email protected]..
Hi Slava!
If I just have Weblogic 6.1 (as an Admin Server), Would I be able to create
Dynamic DataSources?. The documentation says that you can't create aYes, you'll be able to create a datasource.
dynamic Datasource in Weblogic. what is JMX?. I would appreciate if youThis is a brand-new feature.
describe in detail?.Look here for JMX http://java.sun.com/products/JavaManagement/
>
can I create a any type of Datasources dynamically (like TXDatasources...).Yes, you can. Look at our doc site for details.
http://e-docs.bea.com/wls/docs61/javadocs/weblogic/management/configuration/JDBCTxDataSourceMBean.html
>
thanks,
Srini
"Slava Imeshev" <[email protected]> wrote in message
news:3b783560$[email protected]..
Hi All,
Here is an example of how to create, use and delete
JDBC DataSources dynamically using JMX and WL 6.1.
Regards,
Slava Imeshev
[att1.html]

Huge query with parameter for to use Dynamic Cursor with Parameters

Hi
Is possible put the query below like dynmic cursor passing Parameters ?
How can I do it ?
    OPEN P_CURSOR FOR
    WITH NOTIFICACAO AS(
      SELECT
       t1.cd_consultora,
       t1.dc_nome_consultora,
       t2.nm_notificacao_cn,
       t2.dt_notificacao_cn dt_notificacao,
       t2.dt_atendimento_notificado,
       t1.cd_tipo_estrutura_comercial,
       t1.cd_estrutura_comercial
        FROM t_consultora t1, nc.t_nc_notificacao_cn t2
       WHERE t2.dt_notificacao_cn BETWEEN w_DTA_INI AND w_DTA_FIM
         AND t2.cd_consultora = t1.cd_consultora
         AND t1.cd_setor = w_cd_setor
         AND t1.cd_tipo_estrutura_comercial = p_tp_estrutura_comercial
         AND t1.cd_estrutura_comercial = p_cd_estrutura_comercial),
    T_NOTIFICADA AS ( select Count(t1.nm_notificacao_cn) over (partition by t1.cd_consultora,t1.nm_notificacao_cn ) QTD_NOTAS,
                             Count(t2.nm_item_notificacao_cn) over (partition by t1.cd_consultora,t1.nm_notificacao_cn ) QTD_ITENS,
                             T3.*
                              from nc.t_nc_notificacao_cn t1,
                                   nc.t_nc_item_notificacao_cn T2,
                                   NOTIFICACAO                  T3
                               where       t1.dt_notificacao_cn >= to_date('01/09/2006','dd/mm/yyyy')
                                and   t3.nm_notificacao_cn = t1.nm_notificacao_cn
                               and    t1.nm_notificacao_cn = t2.nm_notificacao_cn
                               and    ((t2.cd_tipo_item_nc = 4 and t2.cd_subtipo_item_nc = 6)
                                       or t2.cd_tipo_item_nc = 2 or t2.cd_tipo_item_nc = 3)
                                       and t3.cd_consultora = t1.cd_consultora (+) ) ,
    T_BLOQUEADA AS ( SELECT T4.* FROM
                 (SELECT T3.*,
                        CASE WHEN T3.BLOQUEADA = -1 THEN 'Bloqueada'
                             WHEN T3.BLOQUEADA = 0 THEN
                          (CASE WHEN T3.QTD_NOTAS > 2 THEN
                             CASE WHEN T3.QTD_ITENS > 8 THEN 'Atencao / Analise'
                             ELSE
                                'Normal'
                             END
                           ELSE
                             'Atencao / Analise'
                          END)
                         END OBSERVACAO
                  FROM (SELECT CASE WHEN NVL(T2.ID_CN_BLOQUEADA,1) = 1 then -1
                               WHEN NVL(T2.ID_CN_BLOQUEADA,1) = 0 THEN 0
                               END BLOQUEADA, T1.*
                    FROM   T_NOTIFICADA T1,
                           T_PS_CONSULTORA T2
                           WHERE T1.CD_CONSULTORA = T2.CD_PESSOA)T3) T4 )
        select *
          from (SELECT t1.*, ROWNUM r_linha
           FROM (SELECT cd_consultora,
                   dc_nome_consultora,
                   fnc_busca_telefone(CD_CONSULTORA, 1) TELEFONE1,
                   fnc_busca_telefone(CD_CONSULTORA, 2) TELEFONE2,
                    EMAIL,
                    observacao,
                   nm_notificacao_cn,
                   nvl(vl_total_final,0) vl_total_final,
                   dt_notificacao,
                   qt_produto_item_nc,
                  sg_notificacao,
                  ID_SITUACAO,
                   qtd_registros
                FROM (SELECT /*+ INDEX(W5 I0_NC_TIPO_ITEM_NC) */
                   W1.cd_consultora,
                   W1.dc_nome_consultora,
                   fnc_busca_telefone(w1.CD_CONSULTORA, 1) TELEFONE1,
                   fnc_busca_telefone(w1.CD_CONSULTORA, 2) TELEFONE2,
                   fnc_busca_email(w1.CD_CONSULTORA) EMAIL,
                   W1.OBSERVACAO observacao,
                   W1.nm_notificacao_cn,
                   sum(W4.qt_produto_nf *
                       W4.vl_unitario_final_produto_nf) OVER(PARTITION BY W1.cd_consultora, W1.nm_notificacao_cn) vl_total_final,
                   W1.dt_notificacao,
                   sum(W4.qt_produto_nf) OVER(PARTITION BY W1.cd_consultora, W1.nm_notificacao_cn) qt_produto_item_nc,
                   'PENDENTE' sg_notificacao,
                   W5.dc_tipo_item_nc ID_SITUACAO,
                   W_qtd_registros qtd_registros
                    FROM T_BLOQUEADA               W1,
                         nc.t_nc_item_notificacao_cn W2,
                         nc.t_nc_produto_item_nc     W3,
                         nc.t_nc_produto_item_nf     W4,
                         nc.t_nc_tipo_item_nc        W5
                   WHERE W1.dt_atendimento_notificado is null
                     and W1.nm_notificacao_cn =
                         W2.nm_notificacao_cn
                     and W2.cd_tipo_item_nc = W5.cd_tipo_item_nc
                     and W2.nm_notificacao_cn =
                         W3.nm_notificacao_cn(+)
                     and W2.nm_item_notificacao_cn =
                         W3.nm_item_notificacao_cn(+)
                     and W3.nm_notificacao_cn =
                         W4.nm_notificacao_cn(+)
                     and W3.nm_item_notificacao_cn =
                         W4.nm_item_notificacao_cn(+)
                     and W3.nm_sequencia_produto_item_nc =
                         W4.nm_sequencia_produto_item_nc(+)
                     and W2.cd_tipo_item_nc not in (6, 7)
                     and ((W2.id_situacao_item_nc = 1) OR
                         (W2.id_situacao_item_nc = 3 OR
                         W2.id_solucao_definida is not null))
                  UNION
                  SELECT /*+ INDEX(W5 I0_NC_TIPO_ITEM_NC) */
                   W1.cd_consultora,
                   W1.dc_nome_consultora,
                   fnc_busca_telefone(w1.CD_CONSULTORA, 1) TELEFONE1,
                   fnc_busca_telefone(w1.CD_CONSULTORA, 2) TELEFONE2,
                   fnc_busca_email(w1.CD_CONSULTORA) EMAIL,
                   W1.OBSERVACAO observacao,
                   W1.nm_notificacao_cn,
                   sum(W4.qt_produto_nf *
                       W4.vl_unitario_final_produto_nf) OVER(PARTITION BY W1.cd_consultora, W1.nm_notificacao_cn) vl_total_final,
                   W1.dt_notificacao,
                   sum(W4.qt_produto_nf) OVER(PARTITION BY W1.cd_consultora, W1.nm_notificacao_cn) qt_produto_item_nc,
                   'ATENDIDO' sg_notificacao,
                   W5.dc_tipo_item_nc ID_SITUACAO,
                   W_qtd_registros qtd_registros
                    FROM T_BLOQUEADA                W1,
                         nc.t_nc_item_notificacao_cn W2,
                         nc.t_nc_produto_item_nc     W3,
                         nc.t_nc_produto_item_nf     W4,
                         nc.t_nc_tipo_item_nc        W5
                   WHERE W1.dt_atendimento_notificado is not null
                     and W1.nm_notificacao_cn =
                         W2.nm_notificacao_cn
                     and W2.cd_tipo_item_nc = W5.cd_tipo_item_nc
                     and W2.nm_notificacao_cn =
                         W3.nm_notificacao_cn(+)
                     and W2.nm_item_notificacao_cn =
                         W3.nm_item_notificacao_cn(+)
                     and W3.nm_notificacao_cn =
                         W4.nm_notificacao_cn(+)
                     and W3.nm_item_notificacao_cn =
                         W4.nm_item_notificacao_cn(+)
                     and W3.nm_sequencia_produto_item_nc =
                         W4.nm_sequencia_produto_item_nc(+)
                         )T2
---- here with NDS   I changed order by
                   ORDER BY DECODE(p_nm_asc_desc,0,DECODE(p_nm_col_ordem ,1, cd_consultora,2,dc_nome_consultora)) ASC, --,8,vl_total_final)) ASC,
                   DECODE(p_nm_asc_desc,1,DECODE(p_nm_col_ordem ,1, cd_consultora,2,dc_nome_consultora)) desc --,8,vl_total_final)) DESC
                         ) T1
           where rownum <= W_TO_REC)
         where r_linha >= W_FROM_REC;Is It Query very much great and how can I to pass parameters w_DTA_INI ,w_DTA_FIM, W_TO_REC,W_FROM_REc ....etc
TIA

I did (some time ago and it was a packaged procedure) something like
Procedure p(p_one in datatype,p_two in datatype,p_dataset out sys_refcursor) is
the_sql varchar2(32000);
the_cursor sys_refcursor;
begin
the_sql = 'WITH NOTIFICACAO AS( ' ||
            '      SELECT ' ||
            '       t1.cd_consultora, ' ||
            '                               where       t1.dt_notificacao_cn >= to_date(''01/09/2006'',''dd/mm/yyyy'') ' || -- note the ''
            '           where rownum <= :W_TO_REC) ' ||   -- parameter 1
            '         where r_linha >= :W_FROM_REC ';     -- parameter 2
open the_cursor for the_sql using p_one,p_two; -- just by the book
end p;if I remember correctly
Regards
Etbin

Columns selection on a dynamic ALV (With Checkbox)

Hello all,
I have an ALV which display one column per day chosen by the user like that:
EMPLOYEE u2013 DAY01 u2013 DAY02 u2013 DAY03 u2026
Pernr/Name u2013 AUFNR1 u2013 AUFNR2 u2013 AUFNR3 u2026
Pernr/Name u2013 AUFNR1 u2013 AUFNR2 u2013 AUFNR3 u2026
Pernr/Name u2013 AUFNR1 u2013 AUFNR2 u2013 AUFNR3 u2026
My need is to allow the user to select several employees (lines) and several days (DAY1 and DAY3) or one period (DAY1 to DAY3).
After the selection, the user clicks on an ALV button to change the AUFNR data for all employees and days selected.
I'm trying to add a second u2018header lineu2019 or a first line with check box (only for u2018DAYu2019 columns) but I didnu2019t find the solution.
Could you help me?
If needed I can post my code sample.
Thanks in advance.
David
Edited by: David.pac on Dec 12, 2011 3:13 PM

Thanks for Your help.
The date is in fact a CHAR display (not really a date) so that is not the error.
For your information when i select a row in the list (format char YYYYMMDD_HHMM) it seems that Apex do not catch my select in the Session state.
I've change the item name with P2_DATE_FLOW but the problem remain.
This is the debug log if can help
0.03: Application 114, Authentication: CUSTOM2, Page Template: 3644802034190382
0.06: ...Session ID 1868105032215374 can be used
0.06: ...Application session: 1868105032215374, user=Neop
0.06: ...Determine if user "Neop" workspace "2859608277950243" can develop application "114" in workspace "2859608277950243"
0.06: Session: Fetch session header information
0.06: ...Metadata: Fetch page attributes for application 114, page 3
0.06: Fetch session state from database
0.06: Branch point: BEFORE_HEADER
0.06: Fetch application meta data
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.08: Show page template header
0.08: Computation point: AFTER_HEADER
0.08: Processing point: AFTER_HEADER
0.08: Computation point: BEFORE_BOX_BODY
0.08: Processing point: BEFORE_BOX_BODY
0.08: Region: Report 1
Report 1
0.08: show report
0.09: determine column headings
0.09: parse query as: CFM_MDRE
0.12: binding: ":P2_DATE_FLOW"="P2_DATE_FLOW" value="0"
0.14: print column headings
0.14: rows loop: 15 row(s)
No data found.

Dynamic tree with checkboxes

hello!
i have seen the same topic here, but i can't find it again!
can anybody help me?

no, i mean a "real" tree..
or is there a possibility to show the data with spaces in front, like
aaaa
bbbb
ccccc
dddd

Help using dynamic XML with Tree Menu

Can some one please help me? I don't know what I'm doing
wrong. I'd simply like to be able to load an XML file of data and
use this data to populate a Flex tree component.
The XML file needs to reside on the server and will change
from time to time, so I am loading it via an HTTPService call. The
part that I can't get to work is the way the
XML is displayed in the Tree component. It ends up blank or
sometimes I just get the result of "[object Object]". I know my
syntax must be screwed up somewhere, but because
AS3 and Flex are new territory for me, I can't get it to
work. I am feeling my IQ drop on a minute to minute basis. Please
help me if you can! Thanks!
In this example, I am expecting a list of the different
groceries/categories to show up in the tree menu. Instead, I get
nothing.
HERE IS THE XML FILE, CALLED "groceries.xml":
<catalog>
<category name="Meat">
<product name="Buffalo" cost="4" isOrganic="No"
isLowFat="Yes"/>
<product name="T Bone Steak" cost="6" isOrganic="No"
isLowFat="No"/>
<product name="Whole Chicken" cost="1.5" isOrganic="Yes"
isLowFat="No"/>
</category>
<category name="Vegetables">
<product name="Broccoli" cost="2.16" isOrganic="Yes"
isLowFat="Yes"/>
<product name="Vine Ripened Tomatoes" cost="1.69"
isOrganic="No" isLowFat="Yes"/>
<product name="Yellow Peppers" cost="1.25"
isOrganic="Yes" isLowFat="Yes"/>
</category>
<category name="Fruit">
<product name="Bananas" cost="0.95" isOrganic="Yes"
isLowFat="Yes"/>
<product name="Grapes" cost="1.34" isOrganic="No"
isLowFat="Yes" />
<product name="Strawberries" cost="2.5" isOrganic="Yes"
isLowFat="Yes"/>
</category>
</catalog>
HERE IS THE MXML FLEX FILE THAT ISN'T WORKING AS I'D LIKE IT
TO:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute" initialize="initializeHandler(event)" width="240"
height="340">
<mx:Script>
<![CDATA[
import mx.collections.XMLListCollection;
import mx.collections.ICollectionView;
import mx.controls.List;
private function initializeHandler(event:Event):void {
textService.send();
private function resultHandler(event:Event):void {
myTree.dataProvider = textService.lastResult.catalog;
]]>
</mx:Script>
<mx:HTTPService id="textService" url="groceries.xml"
result="resultHandler(event)" />
<mx:Tree id="myTree" labelField="@name" showRoot="false"
x="20" y="20" width="200" height="300" />
</mx:Application>
Any help is deeply appreciated.

You must specify a resultformat of e4x. The default
resultFormat is object. Object only works when you have a very
simple xml structure that can be consistently represented as a set
of objects.

Using dynamic captions with checkboxes

Similar Messages

Maybe you are looking for