Using eBS adapter with FDM

Hi All
I have successfully installed and configure FDM 11.1.1 and HFM 11.1.1.
I also have access to Oracle E-Business Suite.
Can someone please give me a detailed step by step process to extract data from EBS to FDM (EBS adapter is also installed and configured).
I have gone through the readme documents provided by Oracle.
But being very new to world of Hyperion and EBS I am not really able to proceed.
Please do help.
Thanks in advance.

After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
Thanks,
N

Similar Messages

Using eBS Adapter with DB user other than APPS

Anyone know the permissions that need to be set to get a different user from APPS to connect to the eBS adapter.
And has anyone used this successfully.
cheers
James

Anyone know the permissions that need to be set to get a different user from APPS to connect to the eBS adapter.
And has anyone used this successfully.
cheers
James

Problem with Send using JMS Adapter with Websphere MQ

Hi,
We have two scenarios using JMS Adapter with MQ:
1. File->PI->MQ
This works fine and drop the file in MQ correctly.
2. MQ->PI->File
This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
Our PI version is 7.0 SP 13
Websphere MQ Version 6.0.
Any idea what could be wrong?
Cluster Node Administration Information Availability Times
Cluster Node Details for Channel CC_JMS_MQ_Sender
Short Log
In the Last 4 Hours Server 0 15_92786
_Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
Line 1 / 1
Processing Details for Cluster Node Server 0 15_92786
Type
Time Stamp
Message ID
Explanation
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d'; _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
Amith Dharmasiri

Checked the drivers installed in :
/usr/sap/<SID>/DVEBMGS<SYSNO>
/j2ee/cluster/server0/bin/ext/com.sap
.aii.af.jmsproviderlib
They are available and properly added to aii_af_jmsproviderlib.sda.
The drivers are:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
These were installed per OSS note 747601.
Any other suggestions, why retrieving from MQ doesn't work?

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Using converter/adapter with macbook extension cord'

I'm taking my macbook to the u.k. and want to know if i can use just an adapter with the magsafe extension cord. I already have an adapter for the the magsafe cord but may need to use the extension cord as well.

Yes you can just use a plug adapter. It will work fine either way.

RE: Rollback while using DB Adapter with toplink

Hi All,
I am using DB Adapter's Toplink to insert data in ms-sql table.
In case, If I am inserting 10 records and suppose after 6 record insertion is being failed.
Then in above scenario, Is previously inserted records would be roll backed or not?
Is there any thing, we need to do in BPEL or this would be taken care by Top link.
My version of BPEL: 10.1.3.4.0
Thanks in advance.
Regards

Hi Pavan,
Thanks for your response. My process is Asysc. I did one poc, tested if a data of one record is wrong, then it throwing error, and data is not being inserted in data base.
I tested with 4 records, if data of any records is wrong, then it is not being inserted.
Is there any other good way to handle this.
Regards
Edited by: vikky123 on Sep 22, 2010 8:43 PM

Using HTTP adapter with no namespaces

Hi,
Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
Thanks & Regards
Siva

Bernd we are trying to do the same thing only with the soap adapter. I'm convinced that no one really knows how to do it. We can't even find an SAP CONSULTANT that has done it .. at any cost!
If you hear anything good .. please let me know - my email is [email protected]
I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator. In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

Using JMS adapter with J2ee native queuing system

Hi there,
As far as I have understood J2EE contains it's own native queuing system (JMS). Since the J2EE is part of the WAS, shouldn't it be possible to somehow use XI's JMS adapter in conjunction with this native JMS?
I've tried to search many places in many ways, but haven't been able to find any info. Is it possible at all?
Hope, some of u guys can help out there:-)
Regards,
Daniel

Hi Keith,
It looks as if you are in the same situation.
We have this working very nicely now and I'm happy to share. In fact I was just granted wiki permissions so I can add the information there along with screen shots.
Informaiton on this configuration is very scattered but I imagine many people would find it useful for integrating with Mainframes without adding any complexity to the legacy environment. Let me come back to you with some more inormation, but for now you can get started with this:
Insert a module as the 3rd line in your Module Processing Sequence to use AF_Modules/MessageTransformBean and give it a key in order to associate with the parameters you will need to type in below. These parameters are very similar to normal XI File adapter parameters.
SAP Note 793922 has more info on the parameters... not the greatest reference I know.
Also this has some info...
http://help.sap.com/saphelp_nw04/Helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm
I'll try and get some screen shots up on the Wiki.

Using DB Adapter with XMLDB and CLOB

Hi,
with oracle xmldb i can store XMLs in lob or structured storage (s. Oracle® XML DB Developer's Guide 10g Release 2 (10.2) B14259-02).
Now my question:
If want to use a database adapter in the ESB to wake up several BPELs. Is there a functionality how i can transform such a clob into a XML where i can use XSLTs?
The db adapter does only map each column to one xml-tag...
If i try to use a table with xmltype the creation of a database adapter fails with:
"some tables contain columns that are not recognized by the database adapter, so they will captured as strings:
sys_nc_rowinfo$(sys.xmltype)
change teh type of the above columns to that of the closest supported type...."
Message was edited by:
HEWizard

Hi,
To get it working you have to create an AQ-table with payload type xmltype. The xmltype payload data type is available on rdbms 10g and up. If you are on 9i or lower use raw data type. Create a queue inside the AQ-table. I'm not quite sure what's the best scenario for you to the queue with data, but I would imagine that you could create a database trigger on the table you're talking about and enqueue the xml-data (payload) to the AQ-table. Thus using the AQ-table as a staging table for the ESB system.
Next, create an ESB system using an AQAdapter to dequeue the queue (like you did using a DBAdapter). The adapter can handle both single-user and multi-consumer queue's and all data types (raw, xmltype and object types).
Messages are dequeued generally within a second after you commited the transaction.
Kind regards,
H

Using File Adapter with Logical Name

I am creating a file adapter with Logical name. Apart from giving the Logical name is there any other configuration that I am suppose to do on the Web Logic before I start using it?
Thanks in Advance.

After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
Thanks,
N

Does voltage output matter when using an adapter with the macbook???????

i have a generic ac adapter modified with a magsafe plug it works fine on macbook pro i tested it
it is 18.5 volts output 85watts
will it work ok on macbook???

i know that info im trying to find out if using an 18.5 volt universal adapter with a magsafe plug thats 85 watts will it work on a macbook
will the 18.5 volt be too much.....and the 85 watts be ok
note: this is not an apple adapter its a generic one with a magsage plug on it
please dont tell me what is recommended tell me if it will work or not
recommndations are just money making lies from manufacturers to make money

How to use import script with FDM using adapter ERPI?

Hi,
I use FDM and ERPI 11.1.2 to load data from EBS R12 to Planning 11.1.2
Data loaded from eBS are YTD data.
I have seen that I could use an import script to calculate manually the amount with the periodic_net_cr and periodic_net_dr fields.
But how to use this import script? Because in my import format in FDM, I don't use a file but directly the adapter, so no "Expression" field.
Thanks in advance for your help
Fanny

Hello Fanny,
No you will not need to put anything in the BatchAction. If you review the FDM API Documentation posted it will outline all the scripts that will execute for a particular event ... and the order in which they execute. The BatchAciton only affects the execution of the batch ... it does not control processing of data. Processing of data is controlled by many others.
There is a script that can be written and placed (as Tony mentioned) in the ImportAction that will be able to recaculate the values from ERPi to be YTD values. You can possibly open an SR and a support Engineer can help you .... or you can search the current KM base and use that information there from the v11.1.1.3.00 version to build your own for v11.1.2.x
Thank you,

XSL Errors When Using AQ Adapter with EBS Business Events

I am triggering a BPEL process with an Oracle EBS Business Event. After receiving the event, I am trying to perform an XSL transformation to extract parameters from the event. However, I keep getting XSL errors because the BE field ERROR_SUBSCRIPTION comes in containing invalid XML characters (#).
It seems that BPEL or EBS do not properly escape the XML input. Is that a bug, or is there a way to work around this. I know I could filter the XML input in some way, but that seems likely to be more brittle to any future changes to the EBS BE message types.

Adding to the above post, how will the PL/SQL program which triggers the Business Event ensure that the complete data is enqueued in the queue in form of XML?
What will be the additional logic to send complete data in the XML format?

Using Video Adapter with eMac

I've searched all over and cannot find any information on this, so any help would be greatly appreciated.
I would like to send video from my eMac to my TV. I purchased the Apple Video Adapter and an RCA cable. I have the adapter plugged into the computer, and the cable plugged into the adapter and the TV. I restarted the computer. The TV (on its video setting) shows static with the adapter plugged in; if I take it out, it goes black, so clearly some signal is passing through. However, I cannot figure out how to get the eMac to recognize the new "display".
The discussions on the subject mention using a "detect display" fuction. I don't see anything called "detect display" in the display preferences. I do have it set to show the displays in the menu bar, and the drop-down menu only shows the eMac and its resolutions. The preferences, also, only gives me the info for the eMac.
Am I missing something? Is there a setting I need to change? Should I assume the adapter is defective (I gather this has happened to others)?
Thanks in advance for your help!
eMac 700 MHz Mac OS X (10.4.3)

I don't think the problem is at the TV's end, as it's clearly getting some sort of signal on the video setting I'm using (there's static when it's connected to the computer, and nothing when it's not). The problem is that the computer doesn't see that it's connected to another display.
Something I realized, comparing computers (we also have a Mini)--the Mini's display preferences window has a "detect displays" button that the eMac's doesn't. They're both running 10.4.3. Any ideas (anyone?) why the eMac's missing it?
Thanks again!

Insert Multiple records using Database adapter with Stored procedure func

Hi All,
I want to insert multiple records on a database using a stored procedure. I wanted to insert those records using a Database Adapter and the Database adapter should be invoked by a Mediator.
Can somebody suggest me with ideas whether it can be acheived with OOB capabtilities in SOA suite or not?
Thanks for your help in advance.
Thanks,
Shiv

The use case you want to achieve is feature supported by the DBAdapter and it is possible to invoke the same from mediator.
Please have a look at the oracle documentation and you should be able to get the necessary information.
The below links should help you as well:
http://download.oracle.com/docs/cd/E15523_01/integration.1111/e10231/adptr_db.htm
http://blogs.oracle.com/ajaysharma/2011/03/using_file_adapter_database_adapter_and_mediator_component_in_soa_11g.html
There are some video tutorials as well :)
http://www.youtube.com/watch?v=dFldS-fDx70 This should also help
Thanks,
Patrick

Using eBS adapter with FDM

Similar Messages

Maybe you are looking for