Using eDir as backend store for DHCP and DNS
With SLES9 you can use LDAP as the backend for DHCP and DNS? Can you do
this against eDIR? How? Do you manage it within iManager or still using
the YAST2 tools?
On Mon, 25 Apr 2005 14:29:30 +0000, edbmdave wrote:
> With SLES9 you can use LDAP as the backend for DHCP and DNS? Can you do
> this against eDIR? How? Do you manage it within iManager or still using
> the YAST2 tools?
Hmm, haven't tried that. I guess that it would be quite tricky. Even if
you did manage to do it I don't think iManager would be able to see the
config.
Mark
Mark Robinson
Novell Volunteer SysOp
One by one the penguins steal my sanity...
Similar Messages
-
Hello!
I have this scenario on my small network with 10 PCs (connecting from outside to inside my network):
1) Modem with ADSL connection
2) Wireless Router with public IP on WAN interface
3) Switch
4) Server 2012 with DC/DHCP/DNS (with 2 NICs) and others servers/desktops machines
I want to share internet to servers and desktops.
I was able to share internet by 2 methods searching on google, but I am not satisfied with them:
First method - Using the Wireless Router and its DHCP Server
I turned on the DHCP inside the Wireless Router. All machines will get an IP and be able to go to Internet, but I don’t have the ability to control the DHCP and DNS in the router
how I would like to have, because the server DHCP and DNS must be turned off on Windows Server.
Second method - Using the Windows Server RRAS NAT, DHCP and DNS server
I have 2 NICs on the server:
NIC1 - CONNECTED TO SWITCH
IP: 192.168.1.1
MSK: 255.255.255.0
GTW:192.168.1.1
DNS:192.168.1.1
NIC2 - CONNECTED TO WIRELESS ROUTER
(the LAN IP of the wireless router is 172.16.0.1)
IP: 172.16.0.2
MSK: 255.255.0.0
GTW: 172.16.0.1
DNS: 172.16.0.1
After installing and setting the RRAS with NAT at the Server, the internet began to work on all machines but at some times the internet stop to load some
random webpages, and if you hit a couple of times the F5 button, the webpage open sometimes, but very, very slow.
I saw other people in foruns saying that RRAS is not very good, and could cause weird things at internet connection, so, now I think the internet is horrible
because of RRAS. After notice that internet is bad I tested it connecting a cable direct to the lan ports of the Wireless Router, and the internet works fast and perfect.
What is the best thing to do in my case to maintain Windows Server DHCP and DNS turned on and Internet be shared without loss of quality?
Thank you!Hi,
please deploy according to this network topology. please turn off DHCP from router and use internal NAT function to share internet. Detailed configurations:
Router part:
LAN address: 192.168.1.1/24
DHCP part:
scope name : site name
address pool: 192.168.1.3-192.168.1.254
scope options:
router:192.168.1.1
DNS server:192.168.1.2
DNS part:
configure a forwarder to point to the public DNS address such as 8.8.8.8
with these settings, you can maintain Windows Server DHCP and DNS turned on and Internet be shared via hardware router.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?
Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden -
I have a family Apple ID associated with my iMac and iPad for iTunes and Apps and then two new iPhone 5s each which use a personal Apple ID for email and the family Apple ID for iTunes and Apps. Can I use iTunes Match on the iPhones given there are two Apple IDs "loaded" on the iPhone?
Hi Monkey_Dawg,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
iTunes Store: Subscribing to iTunes Match
http://support.apple.com/kb/ht4914
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
- Judy -
How do I change the Apple id against a certain telephone number? I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?
Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them. -
How do I know what OS I have on my iMac? I've used it as a PC for years and need to switch over but I may be out of date with current software. I think I read Lion somewehere....? OS 10.5.8
Click on the Apple icon at the top left of your menu bar, then About this Mac.
OS 10.5.8 is Leopard. Lion is 10.7
As for upgrading:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!
QUOTE: "No green light. Computer turn on."
What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light? -
Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??
Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks, -
I want to use the same apple id for iTunes and iCloud...but I have both set up..my problem is I want to use the one that I use for iTunes for both
iForgot.com
-
Can I use the same Apple ID for iMessage and FaceTime services simultaneously on two different devices - iPhone and iPad? It seems those are competing to each other, and the services work on one of them only (iPhone).
Many thanks, Sir! Both are mine and it's good to know that imessage can work on both with the same Apple ID. Will now have to find out why imessage stopped working on iPad when it started on iPhone (new). After exploring the forum I understand that there may be plenty of reasons why imessage does not work, even though it worked previously on the same device with the same ID.
-
How can i use 2 different apple ids for imessage and facetime on 1 ipad?
How can i use 2 different apple ids for imessage and facetime on 1 ipad?
Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.
-
Everytime I connect my iPod Touch (4th Gen) to my laptop, running Win 7 (64 bit) I get the message "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes" I have reinstalled iTunes several times and it has not fixed the issue. I am running ver 10.2.2.12 of iTunes. I HAVE NOT installed any other burning software to my laptop either. I haven't tried uninstalling iTunes and then re-installing it yet. Would that perhaps fix the problem? I've read that many users have had issues with the new version of the software and I was wondering if that might be causing my issue. I'd like to point out that iTunes seems to work after getting rid of the message, but I haven't tried to burn any CDs or put music from a CD to my laptop. Any ideas on how to get rid of the annoying message?
I also am having trouble hooking up with our other computers using Homegroup. I noticed quite a lot of people are having the same issue and hopefully they come up with a fix for that soon.
Thanks in advance.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
I would like to use my deactiveted iPhone 3G for apps and music. How do I add music? When I synch with iTunes it won't add the selected playlists.
See if this link offers any insight,
Use iPhone as an iPod
http://support.apple.com/kb/HT3406
Maybe you are looking for
-
Garbage displayed while running the report in browser using report server
We are facing problem in displaying the Arabic text from the Report Server. We have Digital Server running Tru64 4.0f unix. We have two similiar servers, both are clustered. We have Report Server(6i) running in one machine and the Database(8.1.7) run
-
I create a PO,and input qty 1056, the standard price of material is 2180.33/1000 PC. I calculate total value is 2180.33 / 1000 *1056 = 2302.42848 , remain decimal 2 is 2302.43. But T-code me21n display condition value is 2302.40. I don't know why. Pl
-
When I write in Freehand mode, How do I erase a portion of what I have written? I cannot find how to turn my stylus into an eraser.
-
Hello, i have a interarcite report, which is really simple (Select * from table). I'm using an interactive report to present the given data. If i want to export to pdf it works fine with a small number of rows. Using a huge number of rows the pdf fil
-
Refreshing music library DONT works
hi, i am using 5730xm i just brought it 4 days ago. it works perfectly well when i transfer songs from my computer to the phone, however when i refresh the music library, the songs WILL NOT be updated. i used the search function on the phone and sear